0 Stk. an Lager
Forming Taps HP-RZ G4 No.2-56UNC (B)
CHF 46.49*
Item original number:
HRZM4UN2EB
Item number:
845094
Technical documents:
Delivery time: 1-3 days
Product information "Forming Taps HP-RZ G4 No.2-56UNC (B)"
| Area of application: | N1 Aluminium alloys ≤ 12% Si N2 Aluminium alloys > 12% Si P1 Steel < 500 N/mm² P2 Steel 500-700 N/mm² P3 Steel 600-800 N/mm² P4 Steel 800-1000 N/mm² M1 Stainless steel < 700 N/mm² M2 Stainless steel < 750 N/mm² |
|---|---|
|
Area of application (●ideal / ◌appropriate): |
◌ N1 Aluminium alloys ≤ 12% Si ◌ N2 Aluminium alloys > 12% Si ● M1 Stainless steel < 700 N/mm² ● M2 Stainless steel < 750 N/mm² ● P1 Steel < 500 N/mm² ● P2 Steel 500-700 N/mm² ● P3 Steel 600-800 N/mm² ● P4 Steel 800-1000 N/mm² |
| Chamfer length: | 2 |
| Coating: | Yes |
| Coating / Suface: | Beschichtet |
| Coolant hole: | No |
| Direction of movement: | Right hand type |
| Hole type: | Blind-hole Through-hole |
|
Length cutting edge (l1): |
8.1 |
| Length square: | 5 |
|
Length total (L): |
42 |
| M1 Stainless steel < 700 N/mm²: | 10-25 m/min |
| M2 Stainless steel < 750 N/mm²: | 10-25 m/min |
| Manufacturer: | Yamawa |
| N1 Aluminium alloys ≤ 12% Si: | 10-30 m/min |
| N2 Aluminium alloys > 12% Si: | 10-30 m/min |
|
No. of cutting edges (Z): |
3 |
| P1 Steel < 500 N/mm²: | 15-30 m/min |
| P2 Steel 500-700 N/mm²: | 15-30 m/min |
| P3 Steel 600-800 N/mm²: | 15-25 m/min |
| P4 Steel 800-1000 N/mm²: | 15-25 m/min |
| Product line: | HP-RZ |
| Shaft type: | Gew. Bohrer JIS |
| Size: | UNC No.2 |
| Size square: | 2.5 |
| Substrate: | HSS-PM |
|
Thread pitch (P): |
0.453 |
| Thread size: | No.2 |
| Thread standard: | UNC Unit coarse thread |
| Tool tolerance: | G4 |
| Tool type: | Forming Taps |
|
Ø Shaft (d): |
3 |