ISO-10303-21;
HEADER;
FILE_DESCRIPTION ((), '1');
FILE_NAME ('C:\\Temp\\Arno\\Ersatzteile\\step\\UP_1111.stp', '2011-04-06T16:23:43', ('Unknown'), ('Unknown'), 'HarmonyWare STEP v1.4.4', 'HarmonyWare Translators', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;

DATA;
#10 = CARTESIAN_POINT ('', (-3.85985830341549, 5.2, -3.18));
#20 = VERTEX_POINT ('', #10);
#30 = CARTESIAN_POINT ('', (-3.85985830341549, 5.7, -2.68));
#40 = VERTEX_POINT ('', #30);
#50 = CARTESIAN_POINT ('', (-3.85985830341549, 5.2, -3.18));
#60 = CARTESIAN_POINT ('', (-3.85985830341549, 5.7, -2.68));
#70 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#50, #60), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#80 = EDGE_CURVE ('', #20, #40, #70, .T.);
#90 = ORIENTED_EDGE ('', *, *, #80, .T.);
#100 = CARTESIAN_POINT ('', (5.48206652593336, 5.7, -2.68));
#110 = VERTEX_POINT ('', #100);
#120 = CARTESIAN_POINT ('', (-3.85985830341549, 5.7, -2.68));
#130 = CARTESIAN_POINT ('', (5.48206652593336, 5.7, -2.68));
#140 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#120, #130), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#150 = EDGE_CURVE ('', #40, #110, #140, .T.);
#160 = ORIENTED_EDGE ('', *, *, #150, .T.);
#170 = CARTESIAN_POINT ('', (5.48206652593336, 5.2, -3.18));
#180 = VERTEX_POINT ('', #170);
#190 = CARTESIAN_POINT ('', (5.48206652593336, 5.7, -2.68));
#200 = CARTESIAN_POINT ('', (5.48206652593336, 5.2, -3.18));
#210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#190, #200), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#220 = EDGE_CURVE ('', #110, #180, #210, .T.);
#230 = ORIENTED_EDGE ('', *, *, #220, .T.);
#240 = CARTESIAN_POINT ('', (5.48206652593336, 5.2, -3.18));
#250 = CARTESIAN_POINT ('', (-3.85985830341549, 5.2, -3.18));
#260 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#240, #250), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#270 = EDGE_CURVE ('', #180, #20, #260, .T.);
#280 = ORIENTED_EDGE ('', *, *, #270, .T.);
#290 = EDGE_LOOP ('', (#90, #160, #230, #280));
#300 = FACE_OUTER_BOUND ('', #290, .T.);
#310 = CARTESIAN_POINT ('', (-3.86085830341549, 5.701, -2.679));
#320 = CARTESIAN_POINT ('', (-3.86085830341549, 5.199, -3.181));
#330 = CARTESIAN_POINT ('', (5.48306652593336, 5.701, -2.679));
#340 = CARTESIAN_POINT ('', (5.48306652593336, 5.199, -3.181));
#350 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#310, #320), (#330, #340)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1.93092915170775, 7.4129956776411), (-0.354967604155647, 0.354967604155647), .UNSPECIFIED.);
#360 = ADVANCED_FACE ('', (#300), #350, .T.);
#370 = CARTESIAN_POINT ('', (-4.45074295522281, 4.70418890660016, -3.18));
#380 = VERTEX_POINT ('', #370);
#390 = CARTESIAN_POINT ('', (-4.94314683172892, 4.79101299543363, -2.68));
#400 = VERTEX_POINT ('', #390);
#410 = CARTESIAN_POINT ('', (-4.45074295522281, 4.70418890660016, -3.18));
#420 = CARTESIAN_POINT ('', (-4.94314683172892, 4.79101299543363, -2.68));
#430 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#410, #420), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#440 = EDGE_CURVE ('', #380, #400, #430, .T.);
#450 = ORIENTED_EDGE ('', *, *, #440, .T.);
#460 = CARTESIAN_POINT ('', (-4.94314683172892, 4.79101299543363, -2.68));
#470 = CARTESIAN_POINT ('', (-4.78286789771049, 5.7, -2.68));
#480 = CARTESIAN_POINT ('', (-3.85985830341549, 5.7, -2.68));
#490 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#460, #470, #480), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (180., 260.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.76604444311898, 1.))
   REPRESENTATION_ITEM ('')
);
#500 = EDGE_CURVE ('', #400, #40, #490, .T.);
#510 = ORIENTED_EDGE ('', *, *, #500, .T.);
#520 = ORIENTED_EDGE ('', *, *, #80, .F.);
#530 = CARTESIAN_POINT ('', (-3.85985830341549, 5.2, -3.18));
#540 = CARTESIAN_POINT ('', (-4.36331808212186, 5.2, -3.18));
#550 = CARTESIAN_POINT ('', (-4.45074295522281, 4.70418890660016, -3.18));
#560 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#530, #540, #550), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (280., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.766044443118979, 1.))
   REPRESENTATION_ITEM ('')
);
#570 = EDGE_CURVE ('', #20, #380, #560, .T.);
#580 = ORIENTED_EDGE ('', *, *, #570, .T.);
#590 = EDGE_LOOP ('', (#450, #510, #520, #580));
#600 = FACE_OUTER_BOUND ('', #590, .T.);
#610 = CARTESIAN_POINT ('', (-3.85985830341549, 5.2, -3.18));
#620 = CARTESIAN_POINT ('', (-3.85985830341549, 5.70000000000238, -2.67999999999762));
#630 = CARTESIAN_POINT ('', (-4.36331808212186, 5.2, -3.18));
#640 = CARTESIAN_POINT ('', (-4.7828678977125, 5.70000000000238, -2.67999999999762));
#650 = CARTESIAN_POINT ('', (-4.45074295522282, 4.70418890660016, -3.18));
#660 = CARTESIAN_POINT ('', (-4.94314683173126, 4.79101299543404, -2.67999999999762));
#670 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#610, #620), (#630, #640), (#650, #660)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 3), (2, 2), (0.279850173461068, 0.5), (0.00199203187251222, 0.998007968132233), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((0.938407972299954, 0.938407972299954), (0.742078434735156, 0.742078434735156), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#680 = ADVANCED_FACE ('', (#600), #670, .T.);
#690 = ORIENTED_EDGE ('', *, *, #220, .F.);
#700 = CARTESIAN_POINT ('', (6.56535505424679, 4.40898700456638, -2.68));
#710 = VERTEX_POINT ('', #700);
#720 = CARTESIAN_POINT ('', (5.48206652593336, 5.7, -2.68));
#730 = CARTESIAN_POINT ('', (5.99500494990386, 5.7, -2.68));
#740 = CARTESIAN_POINT ('', (6.32471541336423, 5.30706637065519, -2.68));
#750 = CARTESIAN_POINT ('', (6.65442587682461, 4.91413274131039, -2.68));
#760 = CARTESIAN_POINT ('', (6.56535505424679, 4.40898700456638, -2.68));
#770 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#720, #730, #740, #750, #760), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 230., 280.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.90630778703665, 1., 0.90630778703665, 1.))
   REPRESENTATION_ITEM ('')
);
#780 = EDGE_CURVE ('', #110, #710, #770, .T.);
#790 = ORIENTED_EDGE ('', *, *, #780, .T.);
#800 = CARTESIAN_POINT ('', (6.07295117774069, 4.49581109339984, -3.18));
#810 = VERTEX_POINT ('', #800);
#820 = CARTESIAN_POINT ('', (6.56535505424679, 4.40898700456638, -2.68));
#830 = CARTESIAN_POINT ('', (6.07295117774069, 4.49581109339984, -3.18));
#840 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#820, #830), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#850 = EDGE_CURVE ('', #710, #810, #840, .T.);
#860 = ORIENTED_EDGE ('', *, *, #850, .T.);
#870 = CARTESIAN_POINT ('', (6.07295117774068, 4.49581109339984, -3.18));
#880 = CARTESIAN_POINT ('', (6.12153526278313, 4.77134513162385, -3.18));
#890 = CARTESIAN_POINT ('', (5.94169319180475, 4.98567256581192, -3.18));
#900 = CARTESIAN_POINT ('', (5.76185112082636, 5.2, -3.18));
#910 = CARTESIAN_POINT ('', (5.48206652593336, 5.2, -3.18));
#920 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#870, #880, #890, #900, #910), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (260., 310., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.90630778703665, 1., 0.90630778703665, 1.))
   REPRESENTATION_ITEM ('')
);
#930 = EDGE_CURVE ('', #810, #180, #920, .T.);
#940 = ORIENTED_EDGE ('', *, *, #930, .T.);
#950 = EDGE_LOOP ('', (#690, #790, #860, #940));
#960 = FACE_OUTER_BOUND ('', #950, .T.);
#970 = CARTESIAN_POINT ('', (6.07295117774068, 4.49581109339984, -3.18));
#980 = CARTESIAN_POINT ('', (6.56535505424804, 4.40898700456615, -2.67999999999873));
#990 = CARTESIAN_POINT ('', (6.08206652593336, 4.54750680188445, -3.18));
#1000 = CARTESIAN_POINT ('', (6.58206652593463, 4.50376247012137, -2.67999999999873));
#1010 = CARTESIAN_POINT ('', (6.08206652593336, 4.6, -3.18));
#1020 = CARTESIAN_POINT ('', (6.58206652593463, 4.6, -2.67999999999873));
#1030 = CARTESIAN_POINT ('', (6.08206652593336, 5.2, -3.18));
#1040 = CARTESIAN_POINT ('', (6.58206652593463, 5.70000000000127, -2.67999999999873));
#1050 = CARTESIAN_POINT ('', (5.48206652593336, 5.2, -3.18));
#1060 = CARTESIAN_POINT ('', (5.48206652593336, 5.70000000000127, -2.67999999999873));
#1070 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#970, #980), (#990, #1000), (#1010, #1020), (#1030, #1040), (#1050, #1060)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 3), (2, 2), (0.220149826538931, 0.25, 0.5), (0.00199203187250418, 0.998007968130025), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((0.938407972299952, 0.938407972299952), (0.96502834645139, 0.96502834645139), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#1080 = ADVANCED_FACE ('', (#960), #1070, .T.);
#1090 = CARTESIAN_POINT ('', (-6.07295117774069, -4.49581109339984, -3.18));
#1100 = VERTEX_POINT ('', #1090);
#1110 = CARTESIAN_POINT ('', (-6.56535505424679, -4.40898700456637, -2.68));
#1120 = VERTEX_POINT ('', #1110);
#1130 = CARTESIAN_POINT ('', (-6.07295117774069, -4.49581109339984, -3.18));
#1140 = CARTESIAN_POINT ('', (-6.56535505424679, -4.40898700456637, -2.68));
#1150 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1130, #1140), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1160 = EDGE_CURVE ('', #1100, #1120, #1150, .T.);
#1170 = ORIENTED_EDGE ('', *, *, #1160, .T.);
#1180 = CARTESIAN_POINT ('', (-6.56535505424679, -4.40898700456637, -2.68));
#1190 = CARTESIAN_POINT ('', (-4.94314683172892, 4.79101299543363, -2.68));
#1200 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1180, #1190), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1210 = EDGE_CURVE ('', #1120, #400, #1200, .T.);
#1220 = ORIENTED_EDGE ('', *, *, #1210, .T.);
#1230 = ORIENTED_EDGE ('', *, *, #440, .F.);
#1240 = CARTESIAN_POINT ('', (-4.45074295522281, 4.70418890660016, -3.18));
#1250 = CARTESIAN_POINT ('', (-6.07295117774069, -4.49581109339984, -3.18));
#1260 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1240, #1250), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1270 = EDGE_CURVE ('', #380, #1100, #1260, .T.);
#1280 = ORIENTED_EDGE ('', *, *, #1270, .T.);
#1290 = EDGE_LOOP ('', (#1170, #1220, #1230, #1280));
#1300 = FACE_OUTER_BOUND ('', #1290, .T.);
#1310 = CARTESIAN_POINT ('', (-5.76767462443112, 4.79101299543363, -1.86799863717283));
#1320 = CARTESIAN_POINT ('', (-6.57390018861472, -4.49581109339984, -2.68666153022746));
#1330 = CARTESIAN_POINT ('', (-4.44219782085488, 4.79101299543363, -3.17333846977255));
#1340 = CARTESIAN_POINT ('', (-5.24842338503848, -4.49581109339984, -3.99200136282718));
#1350 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1310, #1320), (#1330, #1340)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.691382775940562, 1.16894000126509), (-6.59391775792694, 2.76371603752292), .UNSPECIFIED.);
#1360 = ADVANCED_FACE ('', (#1300), #1350, .T.);
#1370 = ORIENTED_EDGE ('', *, *, #850, .F.);
#1380 = CARTESIAN_POINT ('', (4.94314683172892, -4.79101299543363, -2.68));
#1390 = VERTEX_POINT ('', #1380);
#1400 = CARTESIAN_POINT ('', (6.56535505424679, 4.40898700456638, -2.68));
#1410 = CARTESIAN_POINT ('', (4.94314683172892, -4.79101299543363, -2.68));
#1420 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1400, #1410), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1430 = EDGE_CURVE ('', #710, #1390, #1420, .T.);
#1440 = ORIENTED_EDGE ('', *, *, #1430, .T.);
#1450 = CARTESIAN_POINT ('', (4.45074295522281, -4.70418890660016, -3.18));
#1460 = VERTEX_POINT ('', #1450);
#1470 = CARTESIAN_POINT ('', (4.94314683172892, -4.79101299543363, -2.68));
#1480 = CARTESIAN_POINT ('', (4.45074295522281, -4.70418890660016, -3.18));
#1490 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1470, #1480), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1500 = EDGE_CURVE ('', #1390, #1460, #1490, .T.);
#1510 = ORIENTED_EDGE ('', *, *, #1500, .T.);
#1520 = CARTESIAN_POINT ('', (4.45074295522281, -4.70418890660016, -3.18));
#1530 = CARTESIAN_POINT ('', (6.07295117774069, 4.49581109339984, -3.18));
#1540 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1520, #1530), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1550 = EDGE_CURVE ('', #1460, #810, #1540, .T.);
#1560 = ORIENTED_EDGE ('', *, *, #1550, .T.);
#1570 = EDGE_LOOP ('', (#1370, #1440, #1510, #1560));
#1580 = FACE_OUTER_BOUND ('', #1570, .T.);
#1590 = CARTESIAN_POINT ('', (5.24842338503848, 4.49581109339984, -3.99200136282718));
#1600 = CARTESIAN_POINT ('', (4.44219782085488, -4.79101299543363, -3.17333846977255));
#1610 = CARTESIAN_POINT ('', (6.57390018861472, 4.49581109339984, -2.68666153022746));
#1620 = CARTESIAN_POINT ('', (5.76767462443112, -4.79101299543363, -1.86799863717283));
#1630 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1590, #1600), (#1610, #1620)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1.16894000126509, 0.691382775940562), (-2.76371603752292, 6.59391775792694), .UNSPECIFIED.);
#1640 = ADVANCED_FACE ('', (#1580), #1630, .T.);
#1650 = CARTESIAN_POINT ('', (-5.48206652593336, -5.2, -3.18));
#1660 = VERTEX_POINT ('', #1650);
#1670 = CARTESIAN_POINT ('', (-5.48206652593336, -5.7, -2.68));
#1680 = VERTEX_POINT ('', #1670);
#1690 = CARTESIAN_POINT ('', (-5.48206652593336, -5.2, -3.18));
#1700 = CARTESIAN_POINT ('', (-5.48206652593336, -5.7, -2.68));
#1710 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1690, #1700), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1720 = EDGE_CURVE ('', #1660, #1680, #1710, .T.);
#1730 = ORIENTED_EDGE ('', *, *, #1720, .T.);
#1740 = CARTESIAN_POINT ('', (-5.48206652593336, -5.7, -2.68));
#1750 = CARTESIAN_POINT ('', (-5.99500494990386, -5.7, -2.68));
#1760 = CARTESIAN_POINT ('', (-6.32471541336424, -5.30706637065519, -2.68));
#1770 = CARTESIAN_POINT ('', (-6.65442587682461, -4.91413274131038, -2.68));
#1780 = CARTESIAN_POINT ('', (-6.56535505424679, -4.40898700456637, -2.68));
#1790 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1740, #1750, #1760, #1770, #1780), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 230., 280.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.906307787036649, 1., 0.906307787036649, 1.))
   REPRESENTATION_ITEM ('')
);
#1800 = EDGE_CURVE ('', #1680, #1120, #1790, .T.);
#1810 = ORIENTED_EDGE ('', *, *, #1800, .T.);
#1820 = ORIENTED_EDGE ('', *, *, #1160, .F.);
#1830 = CARTESIAN_POINT ('', (-6.07295117774068, -4.49581109339984, -3.18));
#1840 = CARTESIAN_POINT ('', (-6.12153526278313, -4.77134513162385, -3.18));
#1850 = CARTESIAN_POINT ('', (-5.94169319180475, -4.98567256581192, -3.18));
#1860 = CARTESIAN_POINT ('', (-5.76185112082636, -5.2, -3.18));
#1870 = CARTESIAN_POINT ('', (-5.48206652593336, -5.2, -3.18));
#1880 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1830, #1840, #1850, #1860, #1870), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (260., 310., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.90630778703665, 1., 0.90630778703665, 1.))
   REPRESENTATION_ITEM ('')
);
#1890 = EDGE_CURVE ('', #1100, #1660, #1880, .T.);
#1900 = ORIENTED_EDGE ('', *, *, #1890, .T.);
#1910 = EDGE_LOOP ('', (#1730, #1810, #1820, #1900));
#1920 = FACE_OUTER_BOUND ('', #1910, .T.);
#1930 = CARTESIAN_POINT ('', (-6.07295117774068, -4.49581109339984, -3.18));
#1940 = CARTESIAN_POINT ('', (-6.56535505424804, -4.40898700456615, -2.67999999999873));
#1950 = CARTESIAN_POINT ('', (-6.08206652593336, -4.54750680188445, -3.18));
#1960 = CARTESIAN_POINT ('', (-6.58206652593463, -4.50376247012137, -2.67999999999873));
#1970 = CARTESIAN_POINT ('', (-6.08206652593336, -4.6, -3.18));
#1980 = CARTESIAN_POINT ('', (-6.58206652593463, -4.6, -2.67999999999873));
#1990 = CARTESIAN_POINT ('', (-6.08206652593336, -5.2, -3.18));
#2000 = CARTESIAN_POINT ('', (-6.58206652593463, -5.70000000000127, -2.67999999999873));
#2010 = CARTESIAN_POINT ('', (-5.48206652593336, -5.2, -3.18));
#2020 = CARTESIAN_POINT ('', (-5.48206652593336, -5.70000000000127, -2.67999999999873));
#2030 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#1930, #1940), (#1950, #1960), (#1970, #1980), (#1990, #2000), (#2010, #2020)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 3), (2, 2), (0.220149826538931, 0.25, 0.5), (0.00199203187250418, 0.998007968130025), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((0.938407972299952, 0.938407972299952), (0.96502834645139, 0.96502834645139), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#2040 = ADVANCED_FACE ('', (#1920), #2030, .T.);
#2050 = ORIENTED_EDGE ('', *, *, #1500, .F.);
#2060 = CARTESIAN_POINT ('', (3.85985830341549, -5.7, -2.68));
#2070 = VERTEX_POINT ('', #2060);
#2080 = CARTESIAN_POINT ('', (4.94314683172892, -4.79101299543363, -2.68));
#2090 = CARTESIAN_POINT ('', (4.78286789771049, -5.7, -2.68));
#2100 = CARTESIAN_POINT ('', (3.85985830341549, -5.7, -2.68));
#2110 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2080, #2090, #2100), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (180., 260.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.76604444311898, 1.))
   REPRESENTATION_ITEM ('')
);
#2120 = EDGE_CURVE ('', #1390, #2070, #2110, .T.);
#2130 = ORIENTED_EDGE ('', *, *, #2120, .T.);
#2140 = CARTESIAN_POINT ('', (3.85985830341549, -5.2, -3.18));
#2150 = VERTEX_POINT ('', #2140);
#2160 = CARTESIAN_POINT ('', (3.85985830341549, -5.7, -2.68));
#2170 = CARTESIAN_POINT ('', (3.85985830341549, -5.2, -3.18));
#2180 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2160, #2170), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2190 = EDGE_CURVE ('', #2070, #2150, #2180, .T.);
#2200 = ORIENTED_EDGE ('', *, *, #2190, .T.);
#2210 = CARTESIAN_POINT ('', (3.85985830341549, -5.2, -3.18));
#2220 = CARTESIAN_POINT ('', (4.36331808212185, -5.2, -3.18));
#2230 = CARTESIAN_POINT ('', (4.45074295522281, -4.70418890660016, -3.18));
#2240 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2210, #2220, #2230), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (280., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.76604444311898, 1.))
   REPRESENTATION_ITEM ('')
);
#2250 = EDGE_CURVE ('', #2150, #1460, #2240, .T.);
#2260 = ORIENTED_EDGE ('', *, *, #2250, .T.);
#2270 = EDGE_LOOP ('', (#2050, #2130, #2200, #2260));
#2280 = FACE_OUTER_BOUND ('', #2270, .T.);
#2290 = CARTESIAN_POINT ('', (3.85985830341549, -5.2, -3.18));
#2300 = CARTESIAN_POINT ('', (3.85985830341549, -5.70000000000238, -2.67999999999762));
#2310 = CARTESIAN_POINT ('', (4.36331808212186, -5.2, -3.18));
#2320 = CARTESIAN_POINT ('', (4.78286789771249, -5.70000000000238, -2.67999999999762));
#2330 = CARTESIAN_POINT ('', (4.45074295522281, -4.70418890660016, -3.18));
#2340 = CARTESIAN_POINT ('', (4.94314683173126, -4.79101299543404, -2.67999999999762));
#2350 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#2290, #2300), (#2310, #2320), (#2330, #2340)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 3), (2, 2), (0.279850173461069, 0.5), (0.00199203187251018, 0.99800796813223), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((0.938407972299953, 0.938407972299953), (0.742078434735157, 0.742078434735157), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#2360 = ADVANCED_FACE ('', (#2280), #2350, .T.);
#2370 = ORIENTED_EDGE ('', *, *, #2190, .F.);
#2380 = CARTESIAN_POINT ('', (3.85985830341549, -5.7, -2.68));
#2390 = CARTESIAN_POINT ('', (-5.48206652593336, -5.7, -2.68));
#2400 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2380, #2390), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2410 = EDGE_CURVE ('', #2070, #1680, #2400, .T.);
#2420 = ORIENTED_EDGE ('', *, *, #2410, .T.);
#2430 = ORIENTED_EDGE ('', *, *, #1720, .F.);
#2440 = CARTESIAN_POINT ('', (-5.48206652593336, -5.2, -3.18));
#2450 = CARTESIAN_POINT ('', (3.85985830341549, -5.2, -3.18));
#2460 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2440, #2450), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2470 = EDGE_CURVE ('', #1660, #2150, #2460, .T.);
#2480 = ORIENTED_EDGE ('', *, *, #2470, .T.);
#2490 = EDGE_LOOP ('', (#2370, #2420, #2430, #2480));
#2500 = FACE_OUTER_BOUND ('', #2490, .T.);
#2510 = CARTESIAN_POINT ('', (-5.48306652593336, -5.199, -3.181));
#2520 = CARTESIAN_POINT ('', (-5.48306652593336, -5.701, -2.679));
#2530 = CARTESIAN_POINT ('', (3.86085830341549, -5.199, -3.181));
#2540 = CARTESIAN_POINT ('', (3.86085830341549, -5.701, -2.679));
#2550 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2510, #2520), (#2530, #2540)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-7.4129956776411, 1.93092915170775), (-0.354967604155647, 0.354967604155647), .UNSPECIFIED.);
#2560 = ADVANCED_FACE ('', (#2500), #2550, .T.);
#2570 = ORIENTED_EDGE ('', *, *, #270, .F.);
#2580 = ORIENTED_EDGE ('', *, *, #930, .F.);
#2590 = ORIENTED_EDGE ('', *, *, #1550, .F.);
#2600 = ORIENTED_EDGE ('', *, *, #2250, .F.);
#2610 = ORIENTED_EDGE ('', *, *, #2470, .F.);
#2620 = ORIENTED_EDGE ('', *, *, #1890, .F.);
#2630 = ORIENTED_EDGE ('', *, *, #1270, .F.);
#2640 = ORIENTED_EDGE ('', *, *, #570, .F.);
#2650 = EDGE_LOOP ('', (#2570, #2580, #2590, #2600, #2610, #2620, #2630, #2640));
#2660 = FACE_OUTER_BOUND ('', #2650, .T.);
#2670 = CARTESIAN_POINT ('', (-2.57115043874616, 3.06417777247591, -3.18));
#2680 = VERTEX_POINT ('', #2670);
#2690 = CARTESIAN_POINT ('', (2.57115043874616, -3.06417777247591, -3.18));
#2700 = VERTEX_POINT ('', #2690);
#2710 = CARTESIAN_POINT ('', (-2.57115043874616, 3.06417777247591, -3.18));
#2720 = CARTESIAN_POINT ('', (-5.63532821122207, 0.493027333729743, -3.18));
#2730 = CARTESIAN_POINT ('', (-3.06417777247591, -2.57115043874616, -3.18));
#2740 = CARTESIAN_POINT ('', (-0.493027333729744, -5.63532821122207, -3.18));
#2750 = CARTESIAN_POINT ('', (2.57115043874616, -3.06417777247591, -3.18));
#2760 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2710, #2720, #2730, #2740, #2750), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 90., 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#2770 = EDGE_CURVE ('', #2680, #2700, #2760, .T.);
#2780 = ORIENTED_EDGE ('', *, *, #2770, .T.);
#2790 = CARTESIAN_POINT ('', (2.57115043874616, -3.06417777247591, -3.18));
#2800 = CARTESIAN_POINT ('', (5.63532821122207, -0.493027333729745, -3.18));
#2810 = CARTESIAN_POINT ('', (3.06417777247591, 2.57115043874616, -3.18));
#2820 = CARTESIAN_POINT ('', (0.493027333729744, 5.63532821122207, -3.18));
#2830 = CARTESIAN_POINT ('', (-2.57115043874616, 3.06417777247591, -3.18));
#2840 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2790, #2800, #2810, #2820, #2830), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#2850 = EDGE_CURVE ('', #2700, #2680, #2840, .T.);
#2860 = ORIENTED_EDGE ('', *, *, #2850, .T.);
#2870 = EDGE_LOOP ('', (#2780, #2860));
#2880 = FACE_BOUND ('', #2870, .T.);
#2890 = CARTESIAN_POINT ('', (-6.12253526278313, 5.63632821122207, -3.18));
#2900 = CARTESIAN_POINT ('', (-6.12253526278313, -5.63632821122207, -3.18));
#2910 = CARTESIAN_POINT ('', (6.12253526278313, 5.63632821122207, -3.18));
#2920 = CARTESIAN_POINT ('', (6.12253526278313, -5.63632821122207, -3.18));
#2930 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2890, #2900), (#2910, #2920)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 12.2450705255663), (-5.63632821122207, 5.63632821122207), .UNSPECIFIED.);
#2940 = ADVANCED_FACE ('', (#2660, #2880), #2930, .T.);
#2950 = CARTESIAN_POINT ('', (-5.04162760703014, 4.80837781320031, -2.68));
#2960 = VERTEX_POINT ('', #2950);
#2970 = CARTESIAN_POINT ('', (-6.66383582954801, -4.39162218679968, -2.68));
#2980 = VERTEX_POINT ('', #2970);
#2990 = CARTESIAN_POINT ('', (-5.04162760703014, 4.80837781320031, -2.68));
#3000 = CARTESIAN_POINT ('', (-6.66383582954801, -4.39162218679968, -2.68));
#3010 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2990, #3000), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3020 = EDGE_CURVE ('', #2960, #2980, #3010, .T.);
#3030 = ORIENTED_EDGE ('', *, *, #3020, .F.);
#3040 = CARTESIAN_POINT ('', (-3.85985830341549, 5.8, -2.68));
#3050 = VERTEX_POINT ('', #3040);
#3060 = CARTESIAN_POINT ('', (-3.85985830341549, 5.8, -2.68));
#3070 = CARTESIAN_POINT ('', (-4.86677786082823, 5.8, -2.68));
#3080 = CARTESIAN_POINT ('', (-5.04162760703014, 4.80837781320031, -2.68));
#3090 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#3060, #3070, #3080), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 80.0000000000003), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.766044443118976, 1.))
   REPRESENTATION_ITEM ('')
);
#3100 = EDGE_CURVE ('', #3050, #2960, #3090, .T.);
#3110 = ORIENTED_EDGE ('', *, *, #3100, .F.);
#3120 = CARTESIAN_POINT ('', (5.48206652593336, 5.8, -2.68));
#3130 = VERTEX_POINT ('', #3120);
#3140 = CARTESIAN_POINT ('', (5.48206652593336, 5.8, -2.68));
#3150 = CARTESIAN_POINT ('', (-3.85985830341549, 5.8, -2.68));
#3160 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3140, #3150), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3170 = EDGE_CURVE ('', #3130, #3050, #3160, .T.);
#3180 = ORIENTED_EDGE ('', *, *, #3170, .F.);
#3190 = CARTESIAN_POINT ('', (6.66383582954801, 4.39162218679968, -2.68));
#3200 = VERTEX_POINT ('', #3190);
#3210 = CARTESIAN_POINT ('', (6.66383582954801, 4.39162218679968, -2.68));
#3220 = CARTESIAN_POINT ('', (6.76100399963291, 4.94269026324769, -2.68));
#3230 = CARTESIAN_POINT ('', (6.40131985767613, 5.37134513162385, -2.68));
#3240 = CARTESIAN_POINT ('', (6.04163571571936, 5.8, -2.68));
#3250 = CARTESIAN_POINT ('', (5.48206652593336, 5.8, -2.68));
#3260 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#3210, #3220, #3230, #3240, #3250), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 50.0000000000001, 100.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.90630778703665, 1., 0.90630778703665, 1.))
   REPRESENTATION_ITEM ('')
);
#3270 = EDGE_CURVE ('', #3200, #3130, #3260, .T.);
#3280 = ORIENTED_EDGE ('', *, *, #3270, .F.);
#3290 = CARTESIAN_POINT ('', (5.04162760703014, -4.80837781320032, -2.68));
#3300 = VERTEX_POINT ('', #3290);
#3310 = CARTESIAN_POINT ('', (5.04162760703014, -4.80837781320032, -2.68));
#3320 = CARTESIAN_POINT ('', (6.66383582954801, 4.39162218679968, -2.68));
#3330 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3310, #3320), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3340 = EDGE_CURVE ('', #3300, #3200, #3330, .T.);
#3350 = ORIENTED_EDGE ('', *, *, #3340, .F.);
#3360 = CARTESIAN_POINT ('', (3.85985830341549, -5.8, -2.68));
#3370 = VERTEX_POINT ('', #3360);
#3380 = CARTESIAN_POINT ('', (3.85985830341549, -5.8, -2.68));
#3390 = CARTESIAN_POINT ('', (4.86677786082822, -5.8, -2.68));
#3400 = CARTESIAN_POINT ('', (5.04162760703014, -4.80837781320032, -2.68));
#3410 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#3380, #3390, #3400), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 79.9999999999998), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.766044443118979, 1.))
   REPRESENTATION_ITEM ('')
);
#3420 = EDGE_CURVE ('', #3370, #3300, #3410, .T.);
#3430 = ORIENTED_EDGE ('', *, *, #3420, .F.);
#3440 = CARTESIAN_POINT ('', (-5.48206652593336, -5.8, -2.68));
#3450 = VERTEX_POINT ('', #3440);
#3460 = CARTESIAN_POINT ('', (-5.48206652593336, -5.8, -2.68));
#3470 = CARTESIAN_POINT ('', (3.85985830341549, -5.8, -2.68));
#3480 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3460, #3470), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3490 = EDGE_CURVE ('', #3450, #3370, #3480, .T.);
#3500 = ORIENTED_EDGE ('', *, *, #3490, .F.);
#3510 = CARTESIAN_POINT ('', (-6.66383582954801, -4.39162218679968, -2.68));
#3520 = CARTESIAN_POINT ('', (-6.76100399963291, -4.9426902632477, -2.68));
#3530 = CARTESIAN_POINT ('', (-6.40131985767613, -5.37134513162385, -2.68));
#3540 = CARTESIAN_POINT ('', (-6.04163571571936, -5.8, -2.68));
#3550 = CARTESIAN_POINT ('', (-5.48206652593336, -5.8, -2.68));
#3560 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#3510, #3520, #3530, #3540, #3550), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 50.0000000000001, 100.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.90630778703665, 1., 0.90630778703665, 1.))
   REPRESENTATION_ITEM ('')
);
#3570 = EDGE_CURVE ('', #2980, #3450, #3560, .T.);
#3580 = ORIENTED_EDGE ('', *, *, #3570, .F.);
#3590 = EDGE_LOOP ('', (#3030, #3110, #3180, #3280, #3350, #3430, #3500, #3580));
#3600 = FACE_OUTER_BOUND ('', #3590, .T.);
#3610 = ORIENTED_EDGE ('', *, *, #780, .F.);
#3620 = ORIENTED_EDGE ('', *, *, #150, .F.);
#3630 = ORIENTED_EDGE ('', *, *, #500, .F.);
#3640 = ORIENTED_EDGE ('', *, *, #1210, .F.);
#3650 = ORIENTED_EDGE ('', *, *, #1800, .F.);
#3660 = ORIENTED_EDGE ('', *, *, #2410, .F.);
#3670 = ORIENTED_EDGE ('', *, *, #2120, .F.);
#3680 = ORIENTED_EDGE ('', *, *, #1430, .F.);
#3690 = EDGE_LOOP ('', (#3610, #3620, #3630, #3640, #3650, #3660, #3670, #3680));
#3700 = FACE_BOUND ('', #3690, .T.);
#3710 = CARTESIAN_POINT ('', (-6.76200399963291, 5.801, -2.68));
#3720 = CARTESIAN_POINT ('', (-6.76200399963291, -5.801, -2.68));
#3730 = CARTESIAN_POINT ('', (6.76200399963291, 5.801, -2.68));
#3740 = CARTESIAN_POINT ('', (6.76200399963291, -5.801, -2.68));
#3750 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3710, #3720), (#3730, #3740)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 13.5240079992658), (-6.6153635438248, 4.98663645617521), .UNSPECIFIED.);
#3760 = ADVANCED_FACE ('', (#3600, #3700), #3750, .T.);
#3770 = ORIENTED_EDGE ('', *, *, #3340, .T.);
#3780 = CARTESIAN_POINT ('', (6.66383582954801, 4.39162218679968, 0.));
#3790 = VERTEX_POINT ('', #3780);
#3800 = CARTESIAN_POINT ('', (6.66383582954801, 4.39162218679968, 0.));
#3810 = CARTESIAN_POINT ('', (6.66383582954801, 4.39162218679968, -2.68));
#3820 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3800, #3810), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3830 = EDGE_CURVE ('', #3790, #3200, #3820, .T.);
#3840 = ORIENTED_EDGE ('', *, *, #3830, .F.);
#3850 = CARTESIAN_POINT ('', (5.04162760703014, -4.80837781320032, 0.));
#3860 = VERTEX_POINT ('', #3850);
#3870 = CARTESIAN_POINT ('', (5.04162760703014, -4.80837781320032, 0.));
#3880 = CARTESIAN_POINT ('', (6.66383582954801, 4.39162218679968, 0.));
#3890 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3870, #3880), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3900 = EDGE_CURVE ('', #3860, #3790, #3890, .T.);
#3910 = ORIENTED_EDGE ('', *, *, #3900, .F.);
#3920 = CARTESIAN_POINT ('', (5.04162760703014, -4.80837781320032, 0.));
#3930 = CARTESIAN_POINT ('', (5.04162760703014, -4.80837781320032, -2.68));
#3940 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3920, #3930), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3950 = EDGE_CURVE ('', #3860, #3300, #3940, .T.);
#3960 = ORIENTED_EDGE ('', *, *, #3950, .T.);
#3970 = EDGE_LOOP ('', (#3770, #3840, #3910, #3960));
#3980 = FACE_OUTER_BOUND ('', #3970, .T.);
#3990 = CARTESIAN_POINT ('', (6.66403699330928, 4.39276304318174, -2.681));
#4000 = CARTESIAN_POINT ('', (5.04142644326887, -4.80951866958238, -2.681));
#4010 = CARTESIAN_POINT ('', (6.66403699330928, 4.39276304318174, 0.001));
#4020 = CARTESIAN_POINT ('', (5.04142644326887, -4.80951866958238, 0.001));
#4030 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3990, #4000), (#4010, #4020)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.681, 0.001), (-9.34308328527953, 0.00115845593068009), .UNSPECIFIED.);
#4040 = ADVANCED_FACE ('', (#3980), #4030, .T.);
#4050 = ORIENTED_EDGE ('', *, *, #3270, .T.);
#4060 = CARTESIAN_POINT ('', (5.48206652593336, 5.8, 0.));
#4070 = VERTEX_POINT ('', #4060);
#4080 = CARTESIAN_POINT ('', (5.48206652593336, 5.8, 0.));
#4090 = CARTESIAN_POINT ('', (5.48206652593336, 5.8, -2.68));
#4100 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4080, #4090), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4110 = EDGE_CURVE ('', #4070, #3130, #4100, .T.);
#4120 = ORIENTED_EDGE ('', *, *, #4110, .F.);
#4130 = CARTESIAN_POINT ('', (6.66383582954801, 4.39162218679968, 0.));
#4140 = CARTESIAN_POINT ('', (6.76100399963291, 4.94269026324769, 0.));
#4150 = CARTESIAN_POINT ('', (6.40131985767613, 5.37134513162385, 0.));
#4160 = CARTESIAN_POINT ('', (6.04163571571936, 5.8, 0.));
#4170 = CARTESIAN_POINT ('', (5.48206652593336, 5.8, 0.));
#4180 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4130, #4140, #4150, #4160, #4170), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 50.0000000000001, 100.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.90630778703665, 1., 0.90630778703665, 1.))
   REPRESENTATION_ITEM ('')
);
#4190 = EDGE_CURVE ('', #3790, #4070, #4180, .T.);
#4200 = ORIENTED_EDGE ('', *, *, #4190, .F.);
#4210 = ORIENTED_EDGE ('', *, *, #3830, .T.);
#4220 = EDGE_LOOP ('', (#4050, #4120, #4200, #4210));
#4230 = FACE_OUTER_BOUND ('', #4220, .T.);
#4240 = CARTESIAN_POINT ('', (5.48206652593336, 5.8, 0.));
#4250 = CARTESIAN_POINT ('', (5.48206652593336, 5.8, -2.68));
#4260 = CARTESIAN_POINT ('', (5.58705292216447, 5.8, 2.87614096701842E-17));
#4270 = CARTESIAN_POINT ('', (5.58705292216447, 5.8, -2.68));
#4280 = CARTESIAN_POINT ('', (5.69044433913368, 5.78176930361465, 2.77555756156289E-17));
#4290 = CARTESIAN_POINT ('', (5.69044433913368, 5.78176930361465, -2.68));
#4300 = CARTESIAN_POINT ('', (6.87221364274833, 5.57339149041433, 3.92523114670944E-17));
#4310 = CARTESIAN_POINT ('', (6.87221364274833, 5.57339149041433, -2.68));
#4320 = CARTESIAN_POINT ('', (6.66383582954801, 4.39162218679968, 2.77555756156289E-17));
#4330 = CARTESIAN_POINT ('', (6.66383582954801, 4.39162218679968, -2.68));
#4340 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#4240, #4250), (#4260, #4270), (#4280, #4290), (#4300, #4310), (#4320, #4330)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 3), (2, 2), (0.220149826538931, 0.25, 0.5), (0.083644046731295, 0.916355953268705), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((0.938407972299953, 0.938407972299953), (0.965028346451391, 0.965028346451391), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#4350 = ADVANCED_FACE ('', (#4230), #4340, .T.);
#4360 = ORIENTED_EDGE ('', *, *, #3170, .T.);
#4370 = CARTESIAN_POINT ('', (-3.85985830341549, 5.8, 0.));
#4380 = VERTEX_POINT ('', #4370);
#4390 = CARTESIAN_POINT ('', (-3.85985830341549, 5.8, 0.));
#4400 = CARTESIAN_POINT ('', (-3.85985830341549, 5.8, -2.68));
#4410 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4390, #4400), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4420 = EDGE_CURVE ('', #4380, #3050, #4410, .T.);
#4430 = ORIENTED_EDGE ('', *, *, #4420, .F.);
#4440 = CARTESIAN_POINT ('', (5.48206652593336, 5.8, 0.));
#4450 = CARTESIAN_POINT ('', (-3.85985830341549, 5.8, 0.));
#4460 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4440, #4450), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4470 = EDGE_CURVE ('', #4070, #4380, #4460, .T.);
#4480 = ORIENTED_EDGE ('', *, *, #4470, .F.);
#4490 = ORIENTED_EDGE ('', *, *, #4110, .T.);
#4500 = EDGE_LOOP ('', (#4360, #4430, #4480, #4490));
#4510 = FACE_OUTER_BOUND ('', #4500, .T.);
#4520 = CARTESIAN_POINT ('', (5.48306652593336, 5.8, 0.001));
#4530 = CARTESIAN_POINT ('', (-3.86085830341549, 5.8, 0.001));
#4540 = CARTESIAN_POINT ('', (5.48306652593336, 5.8, -2.681));
#4550 = CARTESIAN_POINT ('', (-3.86085830341549, 5.8, -2.681));
#4560 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4520, #4530), (#4540, #4550)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.001, 2.681), (-0.00100000000000033, 9.34292482934885), .UNSPECIFIED.);
#4570 = ADVANCED_FACE ('', (#4510), #4560, .T.);
#4580 = ORIENTED_EDGE ('', *, *, #3100, .T.);
#4590 = CARTESIAN_POINT ('', (-5.04162760703014, 4.80837781320031, 0.));
#4600 = VERTEX_POINT ('', #4590);
#4610 = CARTESIAN_POINT ('', (-5.04162760703014, 4.80837781320031, 0.));
#4620 = CARTESIAN_POINT ('', (-5.04162760703014, 4.80837781320031, -2.68));
#4630 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4610, #4620), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4640 = EDGE_CURVE ('', #4600, #2960, #4630, .T.);
#4650 = ORIENTED_EDGE ('', *, *, #4640, .F.);
#4660 = CARTESIAN_POINT ('', (-3.85985830341549, 5.8, 0.));
#4670 = CARTESIAN_POINT ('', (-4.86677786082823, 5.8, 0.));
#4680 = CARTESIAN_POINT ('', (-5.04162760703014, 4.80837781320031, 0.));
#4690 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4660, #4670, #4680), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 80.0000000000003), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.766044443118976, 1.))
   REPRESENTATION_ITEM ('')
);
#4700 = EDGE_CURVE ('', #4380, #4600, #4690, .T.);
#4710 = ORIENTED_EDGE ('', *, *, #4700, .F.);
#4720 = ORIENTED_EDGE ('', *, *, #4420, .T.);
#4730 = EDGE_LOOP ('', (#4580, #4650, #4710, #4720));
#4740 = FACE_OUTER_BOUND ('', #4730, .T.);
#4750 = CARTESIAN_POINT ('', (-5.04162760703014, 4.80837781320031, 8.87319047842351E-17));
#4760 = CARTESIAN_POINT ('', (-5.04162760703014, 4.80837781320031, -2.68));
#4770 = CARTESIAN_POINT ('', (-4.86677786082823, 5.8, 0.));
#4780 = CARTESIAN_POINT ('', (-4.86677786082823, 5.8, -2.68));
#4790 = CARTESIAN_POINT ('', (-3.85985830341549, 5.8, 2.77555756156289E-17));
#4800 = CARTESIAN_POINT ('', (-3.85985830341549, 5.8, -2.68));
#4810 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#4750, #4760), (#4770, #4780), (#4790, #4800)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 3), (2, 2), (0.279850173461067, 0.5), (0.083644046731295, 0.916355953268705), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((0.938407972299955, 0.938407972299955), (0.742078434735155, 0.742078434735155), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#4820 = ADVANCED_FACE ('', (#4740), #4810, .T.);
#4830 = CARTESIAN_POINT ('', (2.24975663390289, -2.68115555091642, -2.68));
#4840 = VERTEX_POINT ('', #4830);
#4850 = CARTESIAN_POINT ('', (2.57115043874616, -3.06417777247591, -3.18));
#4860 = CARTESIAN_POINT ('', (2.24975663390289, -2.68115555091642, -2.68));
#4870 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4850, #4860), .UNSPECIFIED., .F., .U., (2, 2), (0.00199203187251618, 0.998007968127485), .UNSPECIFIED.);
#4880 = EDGE_CURVE ('', #2700, #4840, #4870, .T.);
#4890 = ORIENTED_EDGE ('', *, *, #4880, .T.);
#4900 = CARTESIAN_POINT ('', (-2.24975663390289, 2.68115555091642, -2.68));
#4910 = VERTEX_POINT ('', #4900);
#4920 = CARTESIAN_POINT ('', (2.24975663390289, -2.68115555091642, -2.68));
#4930 = CARTESIAN_POINT ('', (4.93091218481931, -0.431398917013527, -2.68));
#4940 = CARTESIAN_POINT ('', (2.68115555091642, 2.24975663390289, -2.68));
#4950 = CARTESIAN_POINT ('', (0.431398917013526, 4.93091218481931, -2.68));
#4960 = CARTESIAN_POINT ('', (-2.24975663390289, 2.68115555091642, -2.68));
#4970 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4920, #4930, #4940, #4950, #4960), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#4980 = EDGE_CURVE ('', #4840, #4910, #4970, .T.);
#4990 = ORIENTED_EDGE ('', *, *, #4980, .T.);
#5000 = CARTESIAN_POINT ('', (-2.24975663390289, 2.68115555091642, -2.68));
#5010 = CARTESIAN_POINT ('', (-4.93091218481931, 0.431398917013524, -2.68));
#5020 = CARTESIAN_POINT ('', (-2.68115555091642, -2.24975663390289, -2.68));
#5030 = CARTESIAN_POINT ('', (-0.431398917013526, -4.93091218481931, -2.68));
#5040 = CARTESIAN_POINT ('', (2.24975663390289, -2.68115555091642, -2.68));
#5050 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5000, #5010, #5020, #5030, #5040), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 90., 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#5060 = EDGE_CURVE ('', #4910, #4840, #5050, .T.);
#5070 = ORIENTED_EDGE ('', *, *, #5060, .T.);
#5080 = ORIENTED_EDGE ('', *, *, #4880, .F.);
#5090 = ORIENTED_EDGE ('', *, *, #2770, .F.);
#5100 = ORIENTED_EDGE ('', *, *, #2850, .F.);
#5110 = EDGE_LOOP ('', (#4890, #4990, #5070, #5080, #5090, #5100));
#5120 = FACE_OUTER_BOUND ('', #5110, .T.);
#5130 = CARTESIAN_POINT ('', (2.24975663390289, -2.68115555091642, -2.68));
#5140 = CARTESIAN_POINT ('', (2.57115043874616, -3.06417777247591, -3.18));
#5150 = CARTESIAN_POINT ('', (4.93091218481931, -0.431398917013525, -2.68));
#5160 = CARTESIAN_POINT ('', (5.63532821122207, -0.493027333729743, -3.18));
#5170 = CARTESIAN_POINT ('', (2.68115555091642, 2.24975663390289, -2.68));
#5180 = CARTESIAN_POINT ('', (3.06417777247591, 2.57115043874616, -3.18));
#5190 = CARTESIAN_POINT ('', (0.431398917013525, 4.93091218481931, -2.68));
#5200 = CARTESIAN_POINT ('', (0.493027333729742, 5.63532821122207, -3.18));
#5210 = CARTESIAN_POINT ('', (-2.24975663390289, 2.68115555091642, -2.68));
#5220 = CARTESIAN_POINT ('', (-2.57115043874616, 3.06417777247591, -3.18));
#5230 = CARTESIAN_POINT ('', (-4.93091218481931, 0.431398917013524, -2.68));
#5240 = CARTESIAN_POINT ('', (-5.63532821122207, 0.493027333729743, -3.18));
#5250 = CARTESIAN_POINT ('', (-2.68115555091642, -2.24975663390289, -2.68));
#5260 = CARTESIAN_POINT ('', (-3.06417777247591, -2.57115043874616, -3.18));
#5270 = CARTESIAN_POINT ('', (-0.431398917013526, -4.93091218481931, -2.68));
#5280 = CARTESIAN_POINT ('', (-0.493027333729745, -5.63532821122207, -3.18));
#5290 = CARTESIAN_POINT ('', (2.24975663390289, -2.68115555091642, -2.68));
#5300 = CARTESIAN_POINT ('', (2.57115043874616, -3.06417777247591, -3.18));
#5310 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#5130, #5140), (#5150, #5160), (#5170, #5180), (#5190, #5200), (#5210, #5220), (#5230, #5240), (#5250, #5260), (#5270, #5280), (#5290, #5300)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0.00199203187251296, 0.998007968127485), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#5320 = ADVANCED_FACE ('', (#5120), #5310, .T.);
#5330 = ORIENTED_EDGE ('', *, *, #5060, .F.);
#5340 = ORIENTED_EDGE ('', *, *, #4980, .F.);
#5350 = EDGE_LOOP ('', (#5330, #5340));
#5360 = FACE_OUTER_BOUND ('', #5350, .T.);
#5370 = CARTESIAN_POINT ('', (-2.08905973148125, 2.48964444013668, -2.68));
#5380 = VERTEX_POINT ('', #5370);
#5390 = CARTESIAN_POINT ('', (2.08905973148126, -2.48964444013668, -2.68));
#5400 = VERTEX_POINT ('', #5390);
#5410 = CARTESIAN_POINT ('', (-2.08905973148126, 2.48964444013667, -2.68));
#5420 = CARTESIAN_POINT ('', (-4.57870417161793, 0.400584708655416, -2.68));
#5430 = CARTESIAN_POINT ('', (-2.48964444013668, -2.08905973148126, -2.68));
#5440 = CARTESIAN_POINT ('', (-0.400584708655417, -4.57870417161793, -2.68));
#5450 = CARTESIAN_POINT ('', (2.08905973148126, -2.48964444013668, -2.68));
#5460 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5410, #5420, #5430, #5440, #5450), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 90., 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#5470 = EDGE_CURVE ('', #5380, #5400, #5460, .T.);
#5480 = ORIENTED_EDGE ('', *, *, #5470, .T.);
#5490 = CARTESIAN_POINT ('', (2.08905973148126, -2.48964444013668, -2.68));
#5500 = CARTESIAN_POINT ('', (4.57870417161793, -0.400584708655418, -2.68));
#5510 = CARTESIAN_POINT ('', (2.48964444013667, 2.08905973148126, -2.68));
#5520 = CARTESIAN_POINT ('', (0.400584708655417, 4.57870417161793, -2.68));
#5530 = CARTESIAN_POINT ('', (-2.08905973148126, 2.48964444013667, -2.68));
#5540 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5490, #5500, #5510, #5520, #5530), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#5550 = EDGE_CURVE ('', #5400, #5380, #5540, .T.);
#5560 = ORIENTED_EDGE ('', *, *, #5550, .T.);
#5570 = EDGE_LOOP ('', (#5480, #5560));
#5580 = FACE_BOUND ('', #5570, .T.);
#5590 = CARTESIAN_POINT ('', (-4.93191218481931, 4.93191218481931, -2.68));
#5600 = CARTESIAN_POINT ('', (-4.93191218481931, -4.93191218481931, -2.68));
#5610 = CARTESIAN_POINT ('', (4.93191218481931, 4.93191218481931, -2.68));
#5620 = CARTESIAN_POINT ('', (4.93191218481931, -4.93191218481931, -2.68));
#5630 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5590, #5600), (#5610, #5620)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 9.86382436963862), (-2.34651218929276, 7.51731218034586), .UNSPECIFIED.);
#5640 = ADVANCED_FACE ('', (#5360, #5580), #5630, .T.);
#5650 = CARTESIAN_POINT ('', (2.08905973148126, -2.48964444013668, -1.29903810567666));
#5660 = VERTEX_POINT ('', #5650);
#5670 = CARTESIAN_POINT ('', (2.08905973148126, -2.48964444013668, -1.29903810567666));
#5680 = CARTESIAN_POINT ('', (2.08905973148126, -2.48964444013667, -2.68));
#5690 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5670, #5680), .UNSPECIFIED., .F., .U., (2, 2), (0.0839359047684214, 0.916064095231579), .UNSPECIFIED.);
#5700 = EDGE_CURVE ('', #5660, #5400, #5690, .T.);
#5710 = ORIENTED_EDGE ('', *, *, #5700, .T.);
#5720 = ORIENTED_EDGE ('', *, *, #5470, .F.);
#5730 = ORIENTED_EDGE ('', *, *, #5550, .F.);
#5740 = ORIENTED_EDGE ('', *, *, #5700, .F.);
#5750 = CARTESIAN_POINT ('', (-2.08905973148125, 2.48964444013668, -1.29903810567666));
#5760 = VERTEX_POINT ('', #5750);
#5770 = CARTESIAN_POINT ('', (2.08905973148126, -2.48964444013668, -1.29903810567666));
#5780 = CARTESIAN_POINT ('', (4.57870417161793, -0.400584708655418, -1.29903810567666));
#5790 = CARTESIAN_POINT ('', (2.48964444013667, 2.08905973148126, -1.29903810567666));
#5800 = CARTESIAN_POINT ('', (0.400584708655417, 4.57870417161793, -1.29903810567666));
#5810 = CARTESIAN_POINT ('', (-2.08905973148126, 2.48964444013667, -1.29903810567666));
#5820 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5770, #5780, #5790, #5800, #5810), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#5830 = EDGE_CURVE ('', #5660, #5760, #5820, .T.);
#5840 = ORIENTED_EDGE ('', *, *, #5830, .T.);
#5850 = CARTESIAN_POINT ('', (-2.08905973148126, 2.48964444013667, -1.29903810567666));
#5860 = CARTESIAN_POINT ('', (-4.57870417161793, 0.400584708655416, -1.29903810567666));
#5870 = CARTESIAN_POINT ('', (-2.48964444013668, -2.08905973148126, -1.29903810567666));
#5880 = CARTESIAN_POINT ('', (-0.400584708655418, -4.57870417161793, -1.29903810567666));
#5890 = CARTESIAN_POINT ('', (2.08905973148126, -2.48964444013668, -1.29903810567666));
#5900 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5850, #5860, #5870, #5880, #5890), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 90., 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#5910 = EDGE_CURVE ('', #5760, #5660, #5900, .T.);
#5920 = ORIENTED_EDGE ('', *, *, #5910, .T.);
#5930 = EDGE_LOOP ('', (#5710, #5720, #5730, #5740, #5840, #5920));
#5940 = FACE_OUTER_BOUND ('', #5930, .T.);
#5950 = CARTESIAN_POINT ('', (2.08905973148126, -2.48964444013667, -2.68));
#5960 = CARTESIAN_POINT ('', (2.08905973148126, -2.48964444013668, -1.29903810567666));
#5970 = CARTESIAN_POINT ('', (-0.400584708655418, -4.57870417161793, -2.68));
#5980 = CARTESIAN_POINT ('', (-0.400584708655419, -4.57870417161793, -1.29903810567666));
#5990 = CARTESIAN_POINT ('', (-2.48964444013668, -2.08905973148126, -2.68));
#6000 = CARTESIAN_POINT ('', (-2.48964444013668, -2.08905973148126, -1.29903810567666));
#6010 = CARTESIAN_POINT ('', (-4.57870417161793, 0.400584708655417, -2.68));
#6020 = CARTESIAN_POINT ('', (-4.57870417161793, 0.400584708655417, -1.29903810567666));
#6030 = CARTESIAN_POINT ('', (-2.08905973148126, 2.48964444013667, -2.68));
#6040 = CARTESIAN_POINT ('', (-2.08905973148126, 2.48964444013667, -1.29903810567666));
#6050 = CARTESIAN_POINT ('', (0.400584708655416, 4.57870417161793, -2.68));
#6060 = CARTESIAN_POINT ('', (0.400584708655416, 4.57870417161793, -1.29903810567666));
#6070 = CARTESIAN_POINT ('', (2.48964444013667, 2.08905973148126, -2.68));
#6080 = CARTESIAN_POINT ('', (2.48964444013667, 2.08905973148126, -1.29903810567666));
#6090 = CARTESIAN_POINT ('', (4.57870417161793, -0.400584708655417, -2.68));
#6100 = CARTESIAN_POINT ('', (4.57870417161793, -0.400584708655417, -1.29903810567666));
#6110 = CARTESIAN_POINT ('', (2.08905973148126, -2.48964444013667, -2.68));
#6120 = CARTESIAN_POINT ('', (2.08905973148126, -2.48964444013668, -1.29903810567666));
#6130 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#5950, #5960), (#5970, #5980), (#5990, #6000), (#6010, #6020), (#6030, #6040), (#6050, #6060), (#6070, #6080), (#6090, #6100), (#6110, #6120)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0.0839359047684215, 0.916064095231579), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#6140 = ADVANCED_FACE ('', (#5940), #6130, .T.);
#6150 = CARTESIAN_POINT ('', (2.57115043874616, -3.06417777247591, 0.));
#6160 = VERTEX_POINT ('', #6150);
#6170 = CARTESIAN_POINT ('', (2.57115043874616, -3.06417777247591, 0.));
#6180 = CARTESIAN_POINT ('', (2.08905973148126, -2.48964444013668, -1.29903810567666));
#6190 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6170, #6180), .UNSPECIFIED., .F., .U., (2, 2), (0.000768616995643012, 0.999231383004357), .UNSPECIFIED.);
#6200 = EDGE_CURVE ('', #6160, #5660, #6190, .T.);
#6210 = ORIENTED_EDGE ('', *, *, #6200, .T.);
#6220 = ORIENTED_EDGE ('', *, *, #5910, .F.);
#6230 = ORIENTED_EDGE ('', *, *, #5830, .F.);
#6240 = ORIENTED_EDGE ('', *, *, #6200, .F.);
#6250 = CARTESIAN_POINT ('', (-2.57115043874616, 3.06417777247591, 1.110223E-15));
#6260 = VERTEX_POINT ('', #6250);
#6270 = CARTESIAN_POINT ('', (-2.57115043874616, 3.06417777247591, 0.));
#6280 = CARTESIAN_POINT ('', (0.493027333729751, 5.63532821122207, 0.));
#6290 = CARTESIAN_POINT ('', (3.06417777247591, 2.57115043874616, 0.));
#6300 = CARTESIAN_POINT ('', (5.63532821122207, -0.493027333729754, 0.));
#6310 = CARTESIAN_POINT ('', (2.57115043874616, -3.06417777247591, 0.));
#6320 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#6270, #6280, #6290, #6300, #6310), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (8.60154300370661E-14, 90.0000000000001, 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#6330 = EDGE_CURVE ('', #6260, #6160, #6320, .T.);
#6340 = ORIENTED_EDGE ('', *, *, #6330, .F.);
#6350 = CARTESIAN_POINT ('', (2.57115043874616, -3.06417777247591, 0.));
#6360 = CARTESIAN_POINT ('', (-0.493027333729753, -5.63532821122207, 0.));
#6370 = CARTESIAN_POINT ('', (-3.06417777247591, -2.57115043874616, 0.));
#6380 = CARTESIAN_POINT ('', (-5.63532821122207, 0.493027333729751, 0.));
#6390 = CARTESIAN_POINT ('', (-2.57115043874616, 3.06417777247591, 0.));
#6400 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#6350, #6360, #6370, #6380, #6390), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#6410 = EDGE_CURVE ('', #6160, #6260, #6400, .T.);
#6420 = ORIENTED_EDGE ('', *, *, #6410, .F.);
#6430 = EDGE_LOOP ('', (#6210, #6220, #6230, #6240, #6340, #6420));
#6440 = FACE_OUTER_BOUND ('', #6430, .T.);
#6450 = CARTESIAN_POINT ('', (2.08868861788177, -2.48920216417123, -1.30003810567666));
#6460 = CARTESIAN_POINT ('', (2.57152155234565, -3.06462004844136, 0.00100000000000236));
#6470 = CARTESIAN_POINT ('', (-0.400513546289457, -4.577890782053, -1.30003810567666));
#6480 = CARTESIAN_POINT ('', (-0.493098496095707, -5.636141600787, 0.00100000000000133));
#6490 = CARTESIAN_POINT ('', (-2.48920216417123, -2.08868861788177, -1.30003810567666));
#6500 = CARTESIAN_POINT ('', (-3.06462004844136, -2.57152155234565, 0.00100000000000097));
#6510 = CARTESIAN_POINT ('', (-4.577890782053, 0.400513546289454, -1.30003810567666));
#6520 = CARTESIAN_POINT ('', (-5.636141600787, 0.493098496095705, 0.00100000000000061));
#6530 = CARTESIAN_POINT ('', (-2.08868861788177, 2.48920216417123, -1.30003810567666));
#6540 = CARTESIAN_POINT ('', (-2.57152155234565, 3.06462004844135, 0.00100000000000164));
#6550 = CARTESIAN_POINT ('', (0.400513546289454, 4.577890782053, -1.30003810567666));
#6560 = CARTESIAN_POINT ('', (0.493098496095704, 5.636141600787, 0.00100000000000267));
#6570 = CARTESIAN_POINT ('', (2.48920216417123, 2.08868861788177, -1.30003810567666));
#6580 = CARTESIAN_POINT ('', (3.06462004844135, 2.57152155234565, 0.00100000000000303));
#6590 = CARTESIAN_POINT ('', (4.577890782053, -0.400513546289456, -1.30003810567666));
#6600 = CARTESIAN_POINT ('', (5.636141600787, -0.493098496095706, 0.00100000000000339));
#6610 = CARTESIAN_POINT ('', (2.08868861788177, -2.48920216417123, -1.30003810567666));
#6620 = CARTESIAN_POINT ('', (2.57152155234565, -3.06462004844136, 0.00100000000000236));
#6630 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#6450, #6460), (#6470, #6480), (#6490, #6500), (#6510, #6520), (#6530, #6540), (#6550, #6560), (#6570, #6580), (#6590, #6600), (#6610, #6620)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#6640 = ADVANCED_FACE ('', (#6440), #6630, .T.);
#6650 = ORIENTED_EDGE ('', *, *, #3020, .T.);
#6660 = CARTESIAN_POINT ('', (-6.66383582954801, -4.39162218679968, 0.));
#6670 = VERTEX_POINT ('', #6660);
#6680 = CARTESIAN_POINT ('', (-6.66383582954801, -4.39162218679968, 0.));
#6690 = CARTESIAN_POINT ('', (-6.66383582954801, -4.39162218679968, -2.68));
#6700 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6680, #6690), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6710 = EDGE_CURVE ('', #6670, #2980, #6700, .T.);
#6720 = ORIENTED_EDGE ('', *, *, #6710, .F.);
#6730 = CARTESIAN_POINT ('', (-5.04162760703014, 4.80837781320031, 0.));
#6740 = CARTESIAN_POINT ('', (-6.66383582954801, -4.39162218679968, 0.));
#6750 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6730, #6740), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6760 = EDGE_CURVE ('', #4600, #6670, #6750, .T.);
#6770 = ORIENTED_EDGE ('', *, *, #6760, .F.);
#6780 = ORIENTED_EDGE ('', *, *, #4640, .T.);
#6790 = EDGE_LOOP ('', (#6650, #6720, #6770, #6780));
#6800 = FACE_OUTER_BOUND ('', #6790, .T.);
#6810 = CARTESIAN_POINT ('', (-5.04142644326887, 4.80951866958237, 0.001));
#6820 = CARTESIAN_POINT ('', (-6.66403699330928, -4.39276304318174, 0.001));
#6830 = CARTESIAN_POINT ('', (-5.04142644326887, 4.80951866958237, -2.681));
#6840 = CARTESIAN_POINT ('', (-6.66403699330928, -4.39276304318174, -2.681));
#6850 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#6810, #6820), (#6830, #6840)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.001, 2.681), (-0.0011584559306792, 9.34308328527952), .UNSPECIFIED.);
#6860 = ADVANCED_FACE ('', (#6800), #6850, .T.);
#6870 = ORIENTED_EDGE ('', *, *, #3570, .T.);
#6880 = CARTESIAN_POINT ('', (-5.48206652593336, -5.8, 0.));
#6890 = VERTEX_POINT ('', #6880);
#6900 = CARTESIAN_POINT ('', (-5.48206652593336, -5.8, 0.));
#6910 = CARTESIAN_POINT ('', (-5.48206652593336, -5.8, -2.68));
#6920 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6900, #6910), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6930 = EDGE_CURVE ('', #6890, #3450, #6920, .T.);
#6940 = ORIENTED_EDGE ('', *, *, #6930, .F.);
#6950 = CARTESIAN_POINT ('', (-6.66383582954801, -4.39162218679968, 0.));
#6960 = CARTESIAN_POINT ('', (-6.76100399963291, -4.9426902632477, 0.));
#6970 = CARTESIAN_POINT ('', (-6.40131985767613, -5.37134513162385, 0.));
#6980 = CARTESIAN_POINT ('', (-6.04163571571936, -5.8, 0.));
#6990 = CARTESIAN_POINT ('', (-5.48206652593336, -5.8, 0.));
#7000 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#6950, #6960, #6970, #6980, #6990), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 50.0000000000001, 100.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.90630778703665, 1., 0.90630778703665, 1.))
   REPRESENTATION_ITEM ('')
);
#7010 = EDGE_CURVE ('', #6670, #6890, #7000, .T.);
#7020 = ORIENTED_EDGE ('', *, *, #7010, .F.);
#7030 = ORIENTED_EDGE ('', *, *, #6710, .T.);
#7040 = EDGE_LOOP ('', (#6870, #6940, #7020, #7030));
#7050 = FACE_OUTER_BOUND ('', #7040, .T.);
#7060 = CARTESIAN_POINT ('', (-5.48206652593335, -5.8, 2.95773015947451E-17));
#7070 = CARTESIAN_POINT ('', (-5.48206652593335, -5.8, -2.68));
#7080 = CARTESIAN_POINT ('', (-5.58705292216447, -5.8, 2.87614096701842E-17));
#7090 = CARTESIAN_POINT ('', (-5.58705292216447, -5.8, -2.68));
#7100 = CARTESIAN_POINT ('', (-5.69044433913368, -5.78176930361465, 2.77555756156289E-17));
#7110 = CARTESIAN_POINT ('', (-5.69044433913368, -5.78176930361465, -2.68));
#7120 = CARTESIAN_POINT ('', (-6.87221364274833, -5.57339149041433, 3.92523114670944E-17));
#7130 = CARTESIAN_POINT ('', (-6.87221364274833, -5.57339149041433, -2.68));
#7140 = CARTESIAN_POINT ('', (-6.66383582954801, -4.39162218679968, 2.77555756156289E-17));
#7150 = CARTESIAN_POINT ('', (-6.66383582954801, -4.39162218679968, -2.68));
#7160 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#7060, #7070), (#7080, #7090), (#7100, #7110), (#7120, #7130), (#7140, #7150)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 3), (2, 2), (0.220149826538931, 0.25, 0.5), (0.083644046731295, 0.916355953268705), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((0.938407972299952, 0.938407972299952), (0.96502834645139, 0.96502834645139), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#7170 = ADVANCED_FACE ('', (#7050), #7160, .T.);
#7180 = ORIENTED_EDGE ('', *, *, #3490, .T.);
#7190 = CARTESIAN_POINT ('', (3.85985830341549, -5.8, 0.));
#7200 = VERTEX_POINT ('', #7190);
#7210 = CARTESIAN_POINT ('', (3.85985830341549, -5.8, 0.));
#7220 = CARTESIAN_POINT ('', (3.85985830341549, -5.8, -2.68));
#7230 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7210, #7220), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#7240 = EDGE_CURVE ('', #7200, #3370, #7230, .T.);
#7250 = ORIENTED_EDGE ('', *, *, #7240, .F.);
#7260 = CARTESIAN_POINT ('', (-5.48206652593336, -5.8, 0.));
#7270 = CARTESIAN_POINT ('', (3.85985830341549, -5.8, 0.));
#7280 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7260, #7270), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#7290 = EDGE_CURVE ('', #6890, #7200, #7280, .T.);
#7300 = ORIENTED_EDGE ('', *, *, #7290, .F.);
#7310 = ORIENTED_EDGE ('', *, *, #6930, .T.);
#7320 = EDGE_LOOP ('', (#7180, #7250, #7300, #7310));
#7330 = FACE_OUTER_BOUND ('', #7320, .T.);
#7340 = CARTESIAN_POINT ('', (3.86085830341549, -5.8, -2.681));
#7350 = CARTESIAN_POINT ('', (-5.48306652593336, -5.8, -2.681));
#7360 = CARTESIAN_POINT ('', (3.86085830341549, -5.8, 0.001));
#7370 = CARTESIAN_POINT ('', (-5.48306652593336, -5.8, 0.001));
#7380 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#7340, #7350), (#7360, #7370)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.681, 0.001), (-9.34292482934885, 0.00100000000000033), .UNSPECIFIED.);
#7390 = ADVANCED_FACE ('', (#7330), #7380, .T.);
#7400 = ORIENTED_EDGE ('', *, *, #3420, .T.);
#7410 = ORIENTED_EDGE ('', *, *, #3950, .F.);
#7420 = CARTESIAN_POINT ('', (3.85985830341549, -5.8, 0.));
#7430 = CARTESIAN_POINT ('', (4.86677786082822, -5.8, 0.));
#7440 = CARTESIAN_POINT ('', (5.04162760703014, -4.80837781320032, 0.));
#7450 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#7420, #7430, #7440), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 79.9999999999998), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.766044443118979, 1.))
   REPRESENTATION_ITEM ('')
);
#7460 = EDGE_CURVE ('', #7200, #3860, #7450, .T.);
#7470 = ORIENTED_EDGE ('', *, *, #7460, .F.);
#7480 = ORIENTED_EDGE ('', *, *, #7240, .T.);
#7490 = EDGE_LOOP ('', (#7400, #7410, #7470, #7480));
#7500 = FACE_OUTER_BOUND ('', #7490, .T.);
#7510 = CARTESIAN_POINT ('', (5.04162760703014, -4.80837781320032, 0.));
#7520 = CARTESIAN_POINT ('', (5.04162760703014, -4.80837781320032, -2.68));
#7530 = CARTESIAN_POINT ('', (4.86677786082822, -5.8, 0.));
#7540 = CARTESIAN_POINT ('', (4.86677786082822, -5.8, -2.68));
#7550 = CARTESIAN_POINT ('', (3.85985830341549, -5.8, 2.77555756156289E-17));
#7560 = CARTESIAN_POINT ('', (3.85985830341549, -5.8, -2.68));
#7570 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#7510, #7520), (#7530, #7540), (#7550, #7560)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 3), (2, 2), (0.279850173461069, 0.5), (0.083644046731295, 0.916355953268705), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((0.938407972299952, 0.938407972299952), (0.742078434735157, 0.742078434735157), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#7580 = ADVANCED_FACE ('', (#7500), #7570, .T.);
#7590 = ORIENTED_EDGE ('', *, *, #4700, .T.);
#7600 = ORIENTED_EDGE ('', *, *, #6760, .T.);
#7610 = ORIENTED_EDGE ('', *, *, #7010, .T.);
#7620 = ORIENTED_EDGE ('', *, *, #7290, .T.);
#7630 = ORIENTED_EDGE ('', *, *, #7460, .T.);
#7640 = ORIENTED_EDGE ('', *, *, #3900, .T.);
#7650 = ORIENTED_EDGE ('', *, *, #4190, .T.);
#7660 = ORIENTED_EDGE ('', *, *, #4470, .T.);
#7670 = EDGE_LOOP ('', (#7590, #7600, #7610, #7620, #7630, #7640, #7650, #7660));
#7680 = FACE_OUTER_BOUND ('', #7670, .T.);
#7690 = ORIENTED_EDGE ('', *, *, #6330, .T.);
#7700 = ORIENTED_EDGE ('', *, *, #6410, .T.);
#7710 = EDGE_LOOP ('', (#7690, #7700));
#7720 = FACE_BOUND ('', #7710, .T.);
#7730 = CARTESIAN_POINT ('', (6.76200399963291, 5.801, 0.));
#7740 = CARTESIAN_POINT ('', (6.76200399963291, -5.801, 0.));
#7750 = CARTESIAN_POINT ('', (-6.76200399963291, 5.801, 0.));
#7760 = CARTESIAN_POINT ('', (-6.76200399963291, -5.801, 0.));
#7770 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#7730, #7740), (#7750, #7760)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-6.76200399963291, 6.76200399963291), (-5.801, 5.801), .UNSPECIFIED.);
#7780 = ADVANCED_FACE ('', (#7680, #7720), #7770, .T.);
#7790 = CLOSED_SHELL ('', (#360, #680, #1080, #1360, #1640, #2040, #2360, #2560, #2940, #3760, #4040, #4350, #4570, #4820, #5320, #5640, #6140, #6640, #6860, #7170, #7390, #7580, #7780));
#7800 = MANIFOLD_SOLID_BREP ('Arno-E-Teile_Modelle_TDM_stp: UP_1111_1: VOLUMENK\X\D6RPER1', #7790);
#7810 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#7820 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#7830 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#7840 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(0.000666383582954801), #7810, 'DISTANCE_ACCURACY_VALUE', '');
#7850 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#7840))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#7810, #7820, #7830))
   REPRESENTATION_CONTEXT ('', '3D')
);
#7860 = COLOUR_RGB ('', 0.75294117647059, 0.75294117647059, 0.75294117647059);
#7870 = FILL_AREA_STYLE_COLOUR ('', #7860);
#7880 = FILL_AREA_STYLE ('', (#7870));
#7890 = SURFACE_STYLE_FILL_AREA (#7880);
#7900 = SURFACE_SIDE_STYLE ('', (#7890));
#7910 = SURFACE_STYLE_USAGE (.POSITIVE., #7900);
#7920 = PRESENTATION_STYLE_ASSIGNMENT ((#7910));
#7930 = STYLED_ITEM ('', (#7920), #7800);
#7940 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#7800), #7850);
#7950 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#7960 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #7950);
#7970 = MECHANICAL_CONTEXT ('', #7950, 'mechanical');
#7980 = PRODUCT ('Arno-E-Teile_Modelle_TDM_stp: UP_1111_1: VOLUMENK\X\D6RPER1', '', '', (#7970));
#7990 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#8000 = PERSON ('', '', $, $, $, $);
#8010 = ORGANIZATION ($, '', '');
#8020 = PERSON_AND_ORGANIZATION (#8000, #8010);
#8030 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#8020, #7990, (#7980));
#8040 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#7980));
#8050 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #7980, .NOT_KNOWN.);
#8060 = APPROVAL_STATUS ('approved');
#8070 = APPROVAL (#8060, '');
#8080 = CALENDAR_DATE (2011, 6, 4);
#8090 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#8100 = LOCAL_TIME (16, 23, 43., #8090);
#8110 = DATE_AND_TIME (#8080, #8100);
#8120 = APPROVAL_DATE_TIME (#8110, #8070);
#8130 = APPROVAL_ROLE ('');
#8140 = PERSON ('', '', $, $, $, $);
#8150 = ORGANIZATION ($, '', '');
#8160 = PERSON_AND_ORGANIZATION (#8140, #8150);
#8170 = APPROVAL_PERSON_ORGANIZATION (#8160, #8070, #8130);
#8180 = CC_DESIGN_APPROVAL (#8070, (#8050));
#8190 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#8200 = PERSON ('', '', $, $, $, $);
#8210 = ORGANIZATION ($, '', '');
#8220 = PERSON_AND_ORGANIZATION (#8200, #8210);
#8230 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#8220, #8190, (#8050));
#8240 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#8250 = PERSON ('', '', $, $, $, $);
#8260 = ORGANIZATION ($, '', '');
#8270 = PERSON_AND_ORGANIZATION (#8250, #8260);
#8280 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#8270, #8240, (#8050));
#8290 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#8300 = SECURITY_CLASSIFICATION ('', '', #8290);
#8310 = APPROVAL_STATUS ('approved');
#8320 = APPROVAL (#8310, '');
#8330 = CALENDAR_DATE (2011, 6, 4);
#8340 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#8350 = LOCAL_TIME (16, 23, 43., #8340);
#8360 = DATE_AND_TIME (#8330, #8350);
#8370 = APPROVAL_DATE_TIME (#8360, #8320);
#8380 = APPROVAL_ROLE ('');
#8390 = PERSON ('', '', $, $, $, $);
#8400 = ORGANIZATION ($, '', '');
#8410 = PERSON_AND_ORGANIZATION (#8390, #8400);
#8420 = APPROVAL_PERSON_ORGANIZATION (#8410, #8320, #8380);
#8430 = CC_DESIGN_APPROVAL (#8320, (#8300));
#8440 = DATE_TIME_ROLE ('classification_date');
#8450 = CALENDAR_DATE (2011, 6, 4);
#8460 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#8470 = LOCAL_TIME (16, 23, 43., #8460);
#8480 = DATE_AND_TIME (#8450, #8470);
#8490 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#8480, #8440, (#8300));
#8500 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#8510 = PERSON ('', '', $, $, $, $);
#8520 = ORGANIZATION ($, '', '');
#8530 = PERSON_AND_ORGANIZATION (#8510, #8520);
#8540 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#8530, #8500, (#8300));
#8550 = CC_DESIGN_SECURITY_CLASSIFICATION (#8300, (#8050));
#8560 = DESIGN_CONTEXT ('', #7950, 'design');
#8570 = PRODUCT_DEFINITION ('', '', #8050, #8560);
#8580 = APPROVAL_STATUS ('approved');
#8590 = APPROVAL (#8580, '');
#8600 = CALENDAR_DATE (2011, 6, 4);
#8610 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#8620 = LOCAL_TIME (16, 23, 43., #8610);
#8630 = DATE_AND_TIME (#8600, #8620);
#8640 = APPROVAL_DATE_TIME (#8630, #8590);
#8650 = APPROVAL_ROLE ('');
#8660 = PERSON ('', '', $, $, $, $);
#8670 = ORGANIZATION ($, '', '');
#8680 = PERSON_AND_ORGANIZATION (#8660, #8670);
#8690 = APPROVAL_PERSON_ORGANIZATION (#8680, #8590, #8650);
#8700 = CC_DESIGN_APPROVAL (#8590, (#8570));
#8710 = DATE_TIME_ROLE ('creation_date');
#8720 = CALENDAR_DATE (2011, 6, 4);
#8730 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#8740 = LOCAL_TIME (16, 23, 43., #8730);
#8750 = DATE_AND_TIME (#8720, #8740);
#8760 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#8750, #8710, (#8570));
#8770 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#8780 = PERSON ('', '', $, $, $, $);
#8790 = ORGANIZATION ($, '', '');
#8800 = PERSON_AND_ORGANIZATION (#8780, #8790);
#8810 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#8800, #8770, (#8570));
#8820 = PRODUCT_DEFINITION_SHAPE ('', '', #8570);
#8830 = SHAPE_DEFINITION_REPRESENTATION (#8820, #7940);
ENDSEC;
END-ISO-10303-21;