ISO-10303-21;
HEADER;
FILE_DESCRIPTION ((), '1');
FILE_NAME ('C:\\TDMTemp\\Tools\\SMLIB\\inserts\\S\\step\\SNGX 1205ZZ AP5230.stp', '2011-11-24T13:31:03', ('Unknown'), ('TDM'), 'HarmonyWare STEP v1.4.7', 'T3D tool generator', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;

DATA;
#10 = CARTESIAN_POINT ('', (1.56066017177982, 0.146446609406726, -5.56));
#20 = VERTEX_POINT ('', #10);
#30 = CARTESIAN_POINT ('', (1.9142135623731, 0., -5.56));
#40 = VERTEX_POINT ('', #30);
#50 = CARTESIAN_POINT ('', (1.56066017177982, 0.146446609406726, -5.56));
#60 = CARTESIAN_POINT ('', (1.70710678118655, -1.19615497472362E-18, -5.56));
#70 = CARTESIAN_POINT ('', (1.9142135623731, 0., -5.56));
#80 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#50, #60, #70), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.923879532511287, 1.))
   REPRESENTATION_ITEM ('')
);
#90 = EDGE_CURVE ('', #20, #40, #80, .T.);
#100 = ORIENTED_EDGE ('', *, *, #90, .F.);
#110 = CARTESIAN_POINT ('', (0.146446609406726, 1.56066017177982, -5.56));
#120 = VERTEX_POINT ('', #110);
#130 = CARTESIAN_POINT ('', (0.146446609406726, 1.56066017177982, -5.56));
#140 = CARTESIAN_POINT ('', (1.56066017177982, 0.146446609406726, -5.56));
#150 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#130, #140), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#160 = EDGE_CURVE ('', #120, #20, #150, .T.);
#170 = ORIENTED_EDGE ('', *, *, #160, .F.);
#180 = CARTESIAN_POINT ('', (2.22044604925031E-16, 1.9142135623731, -5.56));
#190 = VERTEX_POINT ('', #180);
#200 = CARTESIAN_POINT ('', (1.66533453693773E-16, 1.91421356237309, -5.56));
#210 = CARTESIAN_POINT ('', (1.87948212892857E-16, 1.70710678118655, -5.56));
#220 = CARTESIAN_POINT ('', (0.146446609406726, 1.56066017177982, -5.56));
#230 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#200, #210, #220), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.923879532511287, 1.))
   REPRESENTATION_ITEM ('')
);
#240 = EDGE_CURVE ('', #190, #120, #230, .T.);
#250 = ORIENTED_EDGE ('', *, *, #240, .F.);
#260 = CARTESIAN_POINT ('', (8.32667268468867E-16, 10.0857864376269, -5.56));
#270 = VERTEX_POINT ('', #260);
#280 = CARTESIAN_POINT ('', (8.88178419700125E-16, 10.0857864376269, -5.56));
#290 = CARTESIAN_POINT ('', (2.22044604925031E-16, 1.9142135623731, -5.56));
#300 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#280, #290), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#310 = EDGE_CURVE ('', #270, #190, #300, .T.);
#320 = ORIENTED_EDGE ('', *, *, #310, .F.);
#330 = CARTESIAN_POINT ('', (0.146446609406727, 10.4393398282202, -5.56));
#340 = VERTEX_POINT ('', #330);
#350 = CARTESIAN_POINT ('', (0.146446609406727, 10.4393398282202, -5.56));
#360 = CARTESIAN_POINT ('', (8.52885872693227E-16, 10.2928932188135, -5.56));
#370 = CARTESIAN_POINT ('', (8.32667268468867E-16, 10.0857864376269, -5.56));
#380 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#350, #360, #370), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.923879532511287, 1.))
   REPRESENTATION_ITEM ('')
);
#390 = EDGE_CURVE ('', #340, #270, #380, .T.);
#400 = ORIENTED_EDGE ('', *, *, #390, .F.);
#410 = CARTESIAN_POINT ('', (1.56066017177982, 11.8535533905933, -5.56));
#420 = VERTEX_POINT ('', #410);
#430 = CARTESIAN_POINT ('', (1.56066017177982, 11.8535533905933, -5.56));
#440 = CARTESIAN_POINT ('', (0.146446609406727, 10.4393398282202, -5.56));
#450 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#430, #440), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#460 = EDGE_CURVE ('', #420, #340, #450, .T.);
#470 = ORIENTED_EDGE ('', *, *, #460, .F.);
#480 = CARTESIAN_POINT ('', (1.9142135623731, 12., -5.56));
#490 = VERTEX_POINT ('', #480);
#500 = CARTESIAN_POINT ('', (1.9142135623731, 12., -5.56));
#510 = CARTESIAN_POINT ('', (1.70710678118655, 12., -5.56));
#520 = CARTESIAN_POINT ('', (1.56066017177982, 11.8535533905933, -5.56));
#530 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#500, #510, #520), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.923879532511286, 1.))
   REPRESENTATION_ITEM ('')
);
#540 = EDGE_CURVE ('', #490, #420, #530, .T.);
#550 = ORIENTED_EDGE ('', *, *, #540, .F.);
#560 = CARTESIAN_POINT ('', (10.0857864376269, 12., -5.56));
#570 = VERTEX_POINT ('', #560);
#580 = CARTESIAN_POINT ('', (10.0857864376269, 12., -5.56));
#590 = CARTESIAN_POINT ('', (1.9142135623731, 12., -5.56));
#600 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#580, #590), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#610 = EDGE_CURVE ('', #570, #490, #600, .T.);
#620 = ORIENTED_EDGE ('', *, *, #610, .F.);
#630 = CARTESIAN_POINT ('', (10.4393398282202, 11.8535533905933, -5.56));
#640 = VERTEX_POINT ('', #630);
#650 = CARTESIAN_POINT ('', (10.4393398282202, 11.8535533905933, -5.56));
#660 = CARTESIAN_POINT ('', (10.2928932188135, 12., -5.56));
#670 = CARTESIAN_POINT ('', (10.0857864376269, 12., -5.56));
#680 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#650, #660, #670), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.923879532511287, 1.))
   REPRESENTATION_ITEM ('')
);
#690 = EDGE_CURVE ('', #640, #570, #680, .T.);
#700 = ORIENTED_EDGE ('', *, *, #690, .F.);
#710 = CARTESIAN_POINT ('', (11.8535533905933, 10.4393398282202, -5.56));
#720 = VERTEX_POINT ('', #710);
#730 = CARTESIAN_POINT ('', (11.8535533905933, 10.4393398282202, -5.56));
#740 = CARTESIAN_POINT ('', (10.4393398282202, 11.8535533905933, -5.56));
#750 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#730, #740), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#760 = EDGE_CURVE ('', #720, #640, #750, .T.);
#770 = ORIENTED_EDGE ('', *, *, #760, .F.);
#780 = CARTESIAN_POINT ('', (12., 10.0857864376269, -5.56));
#790 = VERTEX_POINT ('', #780);
#800 = CARTESIAN_POINT ('', (12., 10.0857864376269, -5.56));
#810 = CARTESIAN_POINT ('', (12., 10.2928932188135, -5.56));
#820 = CARTESIAN_POINT ('', (11.8535533905933, 10.4393398282202, -5.56));
#830 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#800, #810, #820), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.923879532511287, 1.))
   REPRESENTATION_ITEM ('')
);
#840 = EDGE_CURVE ('', #790, #720, #830, .T.);
#850 = ORIENTED_EDGE ('', *, *, #840, .F.);
#860 = CARTESIAN_POINT ('', (12., 1.91421356237309, -5.56));
#870 = VERTEX_POINT ('', #860);
#880 = CARTESIAN_POINT ('', (12., 1.91421356237309, -5.56));
#890 = CARTESIAN_POINT ('', (12., 10.0857864376269, -5.56));
#900 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#880, #890), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#910 = EDGE_CURVE ('', #870, #790, #900, .T.);
#920 = ORIENTED_EDGE ('', *, *, #910, .F.);
#930 = CARTESIAN_POINT ('', (11.8535533905933, 1.56066017177982, -5.56));
#940 = VERTEX_POINT ('', #930);
#950 = CARTESIAN_POINT ('', (11.8535533905933, 1.56066017177982, -5.56));
#960 = CARTESIAN_POINT ('', (12., 1.70710678118655, -5.56));
#970 = CARTESIAN_POINT ('', (12., 1.91421356237309, -5.56));
#980 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#950, #960, #970), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.923879532511287, 1.))
   REPRESENTATION_ITEM ('')
);
#990 = EDGE_CURVE ('', #940, #870, #980, .T.);
#1000 = ORIENTED_EDGE ('', *, *, #990, .F.);
#1010 = CARTESIAN_POINT ('', (10.4393398282202, 0.146446609406726, -5.56));
#1020 = VERTEX_POINT ('', #1010);
#1030 = CARTESIAN_POINT ('', (10.4393398282202, 0.146446609406726, -5.56));
#1040 = CARTESIAN_POINT ('', (11.8535533905933, 1.56066017177982, -5.56));
#1050 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1030, #1040), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1060 = EDGE_CURVE ('', #1020, #940, #1050, .T.);
#1070 = ORIENTED_EDGE ('', *, *, #1060, .F.);
#1080 = CARTESIAN_POINT ('', (10.0857864376269, 0., -5.56));
#1090 = VERTEX_POINT ('', #1080);
#1100 = CARTESIAN_POINT ('', (10.0857864376269, -5.55111512312578E-17, -5.56));
#1110 = CARTESIAN_POINT ('', (10.2928932188135, -5.43149962565342E-17, -5.56));
#1120 = CARTESIAN_POINT ('', (10.4393398282202, 0.146446609406726, -5.56));
#1130 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1100, #1110, #1120), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.923879532511287, 1.))
   REPRESENTATION_ITEM ('')
);
#1140 = EDGE_CURVE ('', #1090, #1020, #1130, .T.);
#1150 = ORIENTED_EDGE ('', *, *, #1140, .F.);
#1160 = CARTESIAN_POINT ('', (1.9142135623731, 0., -5.56));
#1170 = CARTESIAN_POINT ('', (10.0857864376269, 0., -5.56));
#1180 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1160, #1170), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1190 = EDGE_CURVE ('', #40, #1090, #1180, .T.);
#1200 = ORIENTED_EDGE ('', *, *, #1190, .F.);
#1210 = EDGE_LOOP ('', (#100, #170, #250, #320, #400, #470, #550, #620, #700, #770, #850, #920, #1000, #1070, #1150, #1200));
#1220 = FACE_OUTER_BOUND ('', #1210, .T.);
#1230 = CARTESIAN_POINT ('', (15.3338095116624, -3.33380951166243, -5.56));
#1240 = CARTESIAN_POINT ('', (15.3338095116624, 15.3338095116624, -5.56));
#1250 = CARTESIAN_POINT ('', (-3.33380951166243, -3.33380951166243, -5.56));
#1260 = CARTESIAN_POINT ('', (-3.33380951166243, 15.3338095116624, -5.56));
#1270 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1230, #1240), (#1250, #1260)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#1280 = ADVANCED_FACE ('', (#1220), #1270, .T.);
#1290 = CARTESIAN_POINT ('', (0.146446609406726, 1.56066017177982, 0.));
#1300 = VERTEX_POINT ('', #1290);
#1310 = CARTESIAN_POINT ('', (1.56066017177982, 0.146446609406726, 0.));
#1320 = VERTEX_POINT ('', #1310);
#1330 = CARTESIAN_POINT ('', (0.146446609406726, 1.56066017177982, 0.));
#1340 = CARTESIAN_POINT ('', (1.56066017177982, 0.146446609406726, 0.));
#1350 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1330, #1340), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1360 = EDGE_CURVE ('', #1300, #1320, #1350, .T.);
#1370 = ORIENTED_EDGE ('', *, *, #1360, .F.);
#1380 = CARTESIAN_POINT ('', (0.146446609406726, 1.56066017177982, 0.));
#1390 = CARTESIAN_POINT ('', (0.146446609406726, 1.56066017177982, -5.56));
#1400 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#1380, #1390), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#1410 = EDGE_CURVE ('', #1300, #120, #1400, .T.);
#1420 = ORIENTED_EDGE ('', *, *, #1410, .T.);
#1430 = ORIENTED_EDGE ('', *, *, #160, .T.);
#1440 = CARTESIAN_POINT ('', (1.56066017177982, 0.146446609406726, 0.));
#1450 = CARTESIAN_POINT ('', (1.56066017177982, 0.146446609406726, -5.56));
#1460 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#1440, #1450), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#1470 = EDGE_CURVE ('', #1320, #20, #1460, .T.);
#1480 = ORIENTED_EDGE ('', *, *, #1470, .F.);
#1490 = EDGE_LOOP ('', (#1370, #1420, #1430, #1480));
#1500 = FACE_OUTER_BOUND ('', #1490, .T.);
#1510 = CARTESIAN_POINT ('', (0.146446609406726, 1.56066017177982, 0.));
#1520 = CARTESIAN_POINT ('', (1.56066017177982, 0.146446609406726, 0.));
#1530 = CARTESIAN_POINT ('', (0.146446609406726, 1.56066017177982, -5.56));
#1540 = CARTESIAN_POINT ('', (1.56066017177982, 0.146446609406726, -5.56));
#1550 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1510, #1520), (#1530, #1540)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#1560 = ADVANCED_FACE ('', (#1500), #1550, .T.);
#1570 = CARTESIAN_POINT ('', (2.22044604925031E-16, 1.9142135623731, 0.));
#1580 = VERTEX_POINT ('', #1570);
#1590 = CARTESIAN_POINT ('', (1.66533453693773E-16, 1.91421356237309, 0.));
#1600 = CARTESIAN_POINT ('', (1.87948212892857E-16, 1.70710678118655, 0.));
#1610 = CARTESIAN_POINT ('', (0.146446609406726, 1.56066017177982, 0.));
#1620 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1590, #1600, #1610), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.923879532511287, 1.))
   REPRESENTATION_ITEM ('')
);
#1630 = EDGE_CURVE ('', #1580, #1300, #1620, .T.);
#1640 = ORIENTED_EDGE ('', *, *, #1630, .F.);
#1650 = CARTESIAN_POINT ('', (2.22044604925031E-16, 1.9142135623731, 0.));
#1660 = CARTESIAN_POINT ('', (2.22044604925031E-16, 1.9142135623731, -5.56));
#1670 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1650, #1660), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1680 = EDGE_CURVE ('', #1580, #190, #1670, .T.);
#1690 = ORIENTED_EDGE ('', *, *, #1680, .T.);
#1700 = ORIENTED_EDGE ('', *, *, #240, .T.);
#1710 = ORIENTED_EDGE ('', *, *, #1410, .F.);
#1720 = EDGE_LOOP ('', (#1640, #1690, #1700, #1710));
#1730 = FACE_OUTER_BOUND ('', #1720, .T.);
#1740 = CARTESIAN_POINT ('', (1.66533453693773E-16, 1.91421356237309, 0.));
#1750 = CARTESIAN_POINT ('', (1.87948212892857E-16, 1.70710678118655, 0.));
#1760 = CARTESIAN_POINT ('', (0.146446609406726, 1.56066017177982, 0.));
#1770 = CARTESIAN_POINT ('', (1.66533453693773E-16, 1.91421356237309, -5.56));
#1780 = CARTESIAN_POINT ('', (1.87948212892857E-16, 1.70710678118655, -5.56));
#1790 = CARTESIAN_POINT ('', (0.146446609406726, 1.56066017177982, -5.56));
#1800 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#1740, #1750, #1760), (#1770, #1780, #1790)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 3), (0., 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.923879532511287, 1.), (1., 0.923879532511287, 1.)))
   REPRESENTATION_ITEM ('')
);
#1810 = ADVANCED_FACE ('', (#1730), #1800, .T.);
#1820 = CARTESIAN_POINT ('', (8.32667268468867E-16, 10.0857864376269, 0.));
#1830 = VERTEX_POINT ('', #1820);
#1840 = CARTESIAN_POINT ('', (8.88178419700125E-16, 10.0857864376269, 0.));
#1850 = CARTESIAN_POINT ('', (2.22044604925031E-16, 1.9142135623731, 0.));
#1860 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1840, #1850), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1870 = EDGE_CURVE ('', #1830, #1580, #1860, .T.);
#1880 = ORIENTED_EDGE ('', *, *, #1870, .F.);
#1890 = CARTESIAN_POINT ('', (8.32667268468867E-16, 10.0857864376269, 0.));
#1900 = CARTESIAN_POINT ('', (8.32667268468867E-16, 10.0857864376269, -5.56));
#1910 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#1890, #1900), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#1920 = EDGE_CURVE ('', #1830, #270, #1910, .T.);
#1930 = ORIENTED_EDGE ('', *, *, #1920, .T.);
#1940 = ORIENTED_EDGE ('', *, *, #310, .T.);
#1950 = ORIENTED_EDGE ('', *, *, #1680, .F.);
#1960 = EDGE_LOOP ('', (#1880, #1930, #1940, #1950));
#1970 = FACE_OUTER_BOUND ('', #1960, .T.);
#1980 = CARTESIAN_POINT ('', (8.88178419700125E-16, 10.0857864376269, 0.));
#1990 = CARTESIAN_POINT ('', (2.22044604925031E-16, 1.9142135623731, 0.));
#2000 = CARTESIAN_POINT ('', (8.88178419700125E-16, 10.0857864376269, -5.56));
#2010 = CARTESIAN_POINT ('', (2.22044604925031E-16, 1.9142135623731, -5.56));
#2020 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1980, #1990), (#2000, #2010)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#2030 = ADVANCED_FACE ('', (#1970), #2020, .T.);
#2040 = CARTESIAN_POINT ('', (0.146446609406727, 10.4393398282202, 0.));
#2050 = VERTEX_POINT ('', #2040);
#2060 = CARTESIAN_POINT ('', (0.146446609406727, 10.4393398282202, 0.));
#2070 = CARTESIAN_POINT ('', (8.52885872693227E-16, 10.2928932188135, 0.));
#2080 = CARTESIAN_POINT ('', (8.32667268468867E-16, 10.0857864376269, 0.));
#2090 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2060, #2070, #2080), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.923879532511287, 1.))
   REPRESENTATION_ITEM ('')
);
#2100 = EDGE_CURVE ('', #2050, #1830, #2090, .T.);
#2110 = ORIENTED_EDGE ('', *, *, #2100, .F.);
#2120 = CARTESIAN_POINT ('', (0.146446609406727, 10.4393398282202, 0.));
#2130 = CARTESIAN_POINT ('', (0.146446609406727, 10.4393398282202, -5.56));
#2140 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2120, #2130), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2150 = EDGE_CURVE ('', #2050, #340, #2140, .T.);
#2160 = ORIENTED_EDGE ('', *, *, #2150, .T.);
#2170 = ORIENTED_EDGE ('', *, *, #390, .T.);
#2180 = ORIENTED_EDGE ('', *, *, #1920, .F.);
#2190 = EDGE_LOOP ('', (#2110, #2160, #2170, #2180));
#2200 = FACE_OUTER_BOUND ('', #2190, .T.);
#2210 = CARTESIAN_POINT ('', (0.146446609406727, 10.4393398282202, 0.));
#2220 = CARTESIAN_POINT ('', (8.52885872693227E-16, 10.2928932188135, 0.));
#2230 = CARTESIAN_POINT ('', (8.32667268468867E-16, 10.0857864376269, 0.));
#2240 = CARTESIAN_POINT ('', (0.146446609406727, 10.4393398282202, -5.56));
#2250 = CARTESIAN_POINT ('', (8.52885872693227E-16, 10.2928932188135, -5.56));
#2260 = CARTESIAN_POINT ('', (8.32667268468867E-16, 10.0857864376269, -5.56));
#2270 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#2210, #2220, #2230), (#2240, #2250, #2260)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 3), (0., 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.923879532511287, 1.), (1., 0.923879532511287, 1.)))
   REPRESENTATION_ITEM ('')
);
#2280 = ADVANCED_FACE ('', (#2200), #2270, .T.);
#2290 = CARTESIAN_POINT ('', (1.56066017177982, 11.8535533905933, 0.));
#2300 = VERTEX_POINT ('', #2290);
#2310 = CARTESIAN_POINT ('', (1.56066017177982, 11.8535533905933, 0.));
#2320 = CARTESIAN_POINT ('', (0.146446609406727, 10.4393398282202, 0.));
#2330 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2310, #2320), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2340 = EDGE_CURVE ('', #2300, #2050, #2330, .T.);
#2350 = ORIENTED_EDGE ('', *, *, #2340, .F.);
#2360 = CARTESIAN_POINT ('', (1.56066017177982, 11.8535533905933, 0.));
#2370 = CARTESIAN_POINT ('', (1.56066017177982, 11.8535533905933, -5.56));
#2380 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#2360, #2370), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#2390 = EDGE_CURVE ('', #2300, #420, #2380, .T.);
#2400 = ORIENTED_EDGE ('', *, *, #2390, .T.);
#2410 = ORIENTED_EDGE ('', *, *, #460, .T.);
#2420 = ORIENTED_EDGE ('', *, *, #2150, .F.);
#2430 = EDGE_LOOP ('', (#2350, #2400, #2410, #2420));
#2440 = FACE_OUTER_BOUND ('', #2430, .T.);
#2450 = CARTESIAN_POINT ('', (1.56066017177982, 11.8535533905933, 0.));
#2460 = CARTESIAN_POINT ('', (0.146446609406727, 10.4393398282202, 0.));
#2470 = CARTESIAN_POINT ('', (1.56066017177982, 11.8535533905933, -5.56));
#2480 = CARTESIAN_POINT ('', (0.146446609406727, 10.4393398282202, -5.56));
#2490 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2450, #2460), (#2470, #2480)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#2500 = ADVANCED_FACE ('', (#2440), #2490, .T.);
#2510 = CARTESIAN_POINT ('', (1.9142135623731, 12., 0.));
#2520 = VERTEX_POINT ('', #2510);
#2530 = CARTESIAN_POINT ('', (1.9142135623731, 12., 0.));
#2540 = CARTESIAN_POINT ('', (1.70710678118655, 12., 0.));
#2550 = CARTESIAN_POINT ('', (1.56066017177982, 11.8535533905933, 0.));
#2560 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2530, #2540, #2550), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.923879532511286, 1.))
   REPRESENTATION_ITEM ('')
);
#2570 = EDGE_CURVE ('', #2520, #2300, #2560, .T.);
#2580 = ORIENTED_EDGE ('', *, *, #2570, .F.);
#2590 = CARTESIAN_POINT ('', (1.9142135623731, 12., 0.));
#2600 = CARTESIAN_POINT ('', (1.9142135623731, 12., -5.56));
#2610 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2590, #2600), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2620 = EDGE_CURVE ('', #2520, #490, #2610, .T.);
#2630 = ORIENTED_EDGE ('', *, *, #2620, .T.);
#2640 = ORIENTED_EDGE ('', *, *, #540, .T.);
#2650 = ORIENTED_EDGE ('', *, *, #2390, .F.);
#2660 = EDGE_LOOP ('', (#2580, #2630, #2640, #2650));
#2670 = FACE_OUTER_BOUND ('', #2660, .T.);
#2680 = CARTESIAN_POINT ('', (1.9142135623731, 12., 0.));
#2690 = CARTESIAN_POINT ('', (1.70710678118655, 12., 0.));
#2700 = CARTESIAN_POINT ('', (1.56066017177982, 11.8535533905933, 0.));
#2710 = CARTESIAN_POINT ('', (1.9142135623731, 12., -5.56));
#2720 = CARTESIAN_POINT ('', (1.70710678118655, 12., -5.56));
#2730 = CARTESIAN_POINT ('', (1.56066017177982, 11.8535533905933, -5.56));
#2740 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#2680, #2690, #2700), (#2710, #2720, #2730)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 3), (0., 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.923879532511286, 1.), (1., 0.923879532511286, 1.)))
   REPRESENTATION_ITEM ('')
);
#2750 = ADVANCED_FACE ('', (#2670), #2740, .T.);
#2760 = CARTESIAN_POINT ('', (10.0857864376269, 12., 0.));
#2770 = VERTEX_POINT ('', #2760);
#2780 = CARTESIAN_POINT ('', (10.0857864376269, 12., 0.));
#2790 = CARTESIAN_POINT ('', (1.9142135623731, 12., 0.));
#2800 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2780, #2790), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2810 = EDGE_CURVE ('', #2770, #2520, #2800, .T.);
#2820 = ORIENTED_EDGE ('', *, *, #2810, .F.);
#2830 = CARTESIAN_POINT ('', (10.0857864376269, 12., 0.));
#2840 = CARTESIAN_POINT ('', (10.0857864376269, 12., -5.56));
#2850 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#2830, #2840), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#2860 = EDGE_CURVE ('', #2770, #570, #2850, .T.);
#2870 = ORIENTED_EDGE ('', *, *, #2860, .T.);
#2880 = ORIENTED_EDGE ('', *, *, #610, .T.);
#2890 = ORIENTED_EDGE ('', *, *, #2620, .F.);
#2900 = EDGE_LOOP ('', (#2820, #2870, #2880, #2890));
#2910 = FACE_OUTER_BOUND ('', #2900, .T.);
#2920 = CARTESIAN_POINT ('', (10.0857864376269, 12., 0.));
#2930 = CARTESIAN_POINT ('', (1.9142135623731, 12., 0.));
#2940 = CARTESIAN_POINT ('', (10.0857864376269, 12., -5.56));
#2950 = CARTESIAN_POINT ('', (1.9142135623731, 12., -5.56));
#2960 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2920, #2930), (#2940, #2950)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#2970 = ADVANCED_FACE ('', (#2910), #2960, .T.);
#2980 = CARTESIAN_POINT ('', (10.4393398282202, 11.8535533905933, 0.));
#2990 = VERTEX_POINT ('', #2980);
#3000 = CARTESIAN_POINT ('', (10.4393398282202, 11.8535533905933, 0.));
#3010 = CARTESIAN_POINT ('', (10.2928932188135, 12., 0.));
#3020 = CARTESIAN_POINT ('', (10.0857864376269, 12., 0.));
#3030 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#3000, #3010, #3020), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.923879532511287, 1.))
   REPRESENTATION_ITEM ('')
);
#3040 = EDGE_CURVE ('', #2990, #2770, #3030, .T.);
#3050 = ORIENTED_EDGE ('', *, *, #3040, .F.);
#3060 = CARTESIAN_POINT ('', (10.4393398282202, 11.8535533905933, 0.));
#3070 = CARTESIAN_POINT ('', (10.4393398282202, 11.8535533905933, -5.56));
#3080 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3060, #3070), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3090 = EDGE_CURVE ('', #2990, #640, #3080, .T.);
#3100 = ORIENTED_EDGE ('', *, *, #3090, .T.);
#3110 = ORIENTED_EDGE ('', *, *, #690, .T.);
#3120 = ORIENTED_EDGE ('', *, *, #2860, .F.);
#3130 = EDGE_LOOP ('', (#3050, #3100, #3110, #3120));
#3140 = FACE_OUTER_BOUND ('', #3130, .T.);
#3150 = CARTESIAN_POINT ('', (10.4393398282202, 11.8535533905933, 0.));
#3160 = CARTESIAN_POINT ('', (10.2928932188135, 12., 0.));
#3170 = CARTESIAN_POINT ('', (10.0857864376269, 12., 0.));
#3180 = CARTESIAN_POINT ('', (10.4393398282202, 11.8535533905933, -5.56));
#3190 = CARTESIAN_POINT ('', (10.2928932188135, 12., -5.56));
#3200 = CARTESIAN_POINT ('', (10.0857864376269, 12., -5.56));
#3210 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#3150, #3160, #3170), (#3180, #3190, #3200)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 3), (0., 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.923879532511287, 1.), (1., 0.923879532511287, 1.)))
   REPRESENTATION_ITEM ('')
);
#3220 = ADVANCED_FACE ('', (#3140), #3210, .T.);
#3230 = CARTESIAN_POINT ('', (11.8535533905933, 10.4393398282202, 0.));
#3240 = VERTEX_POINT ('', #3230);
#3250 = CARTESIAN_POINT ('', (11.8535533905933, 10.4393398282202, 0.));
#3260 = CARTESIAN_POINT ('', (10.4393398282202, 11.8535533905933, 0.));
#3270 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3250, #3260), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3280 = EDGE_CURVE ('', #3240, #2990, #3270, .T.);
#3290 = ORIENTED_EDGE ('', *, *, #3280, .F.);
#3300 = CARTESIAN_POINT ('', (11.8535533905933, 10.4393398282202, 0.));
#3310 = CARTESIAN_POINT ('', (11.8535533905933, 10.4393398282202, -5.56));
#3320 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#3300, #3310), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#3330 = EDGE_CURVE ('', #3240, #720, #3320, .T.);
#3340 = ORIENTED_EDGE ('', *, *, #3330, .T.);
#3350 = ORIENTED_EDGE ('', *, *, #760, .T.);
#3360 = ORIENTED_EDGE ('', *, *, #3090, .F.);
#3370 = EDGE_LOOP ('', (#3290, #3340, #3350, #3360));
#3380 = FACE_OUTER_BOUND ('', #3370, .T.);
#3390 = CARTESIAN_POINT ('', (11.8535533905933, 10.4393398282202, 0.));
#3400 = CARTESIAN_POINT ('', (10.4393398282202, 11.8535533905933, 0.));
#3410 = CARTESIAN_POINT ('', (11.8535533905933, 10.4393398282202, -5.56));
#3420 = CARTESIAN_POINT ('', (10.4393398282202, 11.8535533905933, -5.56));
#3430 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3390, #3400), (#3410, #3420)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#3440 = ADVANCED_FACE ('', (#3380), #3430, .T.);
#3450 = CARTESIAN_POINT ('', (12., 10.0857864376269, 0.));
#3460 = VERTEX_POINT ('', #3450);
#3470 = CARTESIAN_POINT ('', (12., 10.0857864376269, 0.));
#3480 = CARTESIAN_POINT ('', (12., 10.2928932188135, 0.));
#3490 = CARTESIAN_POINT ('', (11.8535533905933, 10.4393398282202, 0.));
#3500 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#3470, #3480, #3490), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.923879532511287, 1.))
   REPRESENTATION_ITEM ('')
);
#3510 = EDGE_CURVE ('', #3460, #3240, #3500, .T.);
#3520 = ORIENTED_EDGE ('', *, *, #3510, .F.);
#3530 = CARTESIAN_POINT ('', (12., 10.0857864376269, 0.));
#3540 = CARTESIAN_POINT ('', (12., 10.0857864376269, -5.56));
#3550 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3530, #3540), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3560 = EDGE_CURVE ('', #3460, #790, #3550, .T.);
#3570 = ORIENTED_EDGE ('', *, *, #3560, .T.);
#3580 = ORIENTED_EDGE ('', *, *, #840, .T.);
#3590 = ORIENTED_EDGE ('', *, *, #3330, .F.);
#3600 = EDGE_LOOP ('', (#3520, #3570, #3580, #3590));
#3610 = FACE_OUTER_BOUND ('', #3600, .T.);
#3620 = CARTESIAN_POINT ('', (12., 10.0857864376269, 0.));
#3630 = CARTESIAN_POINT ('', (12., 10.2928932188135, 0.));
#3640 = CARTESIAN_POINT ('', (11.8535533905933, 10.4393398282202, 0.));
#3650 = CARTESIAN_POINT ('', (12., 10.0857864376269, -5.56));
#3660 = CARTESIAN_POINT ('', (12., 10.2928932188135, -5.56));
#3670 = CARTESIAN_POINT ('', (11.8535533905933, 10.4393398282202, -5.56));
#3680 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#3620, #3630, #3640), (#3650, #3660, #3670)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 3), (0., 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.923879532511287, 1.), (1., 0.923879532511287, 1.)))
   REPRESENTATION_ITEM ('')
);
#3690 = ADVANCED_FACE ('', (#3610), #3680, .T.);
#3700 = CARTESIAN_POINT ('', (12., 1.91421356237309, 0.));
#3710 = VERTEX_POINT ('', #3700);
#3720 = CARTESIAN_POINT ('', (12., 1.91421356237309, 0.));
#3730 = CARTESIAN_POINT ('', (12., 10.0857864376269, 0.));
#3740 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3720, #3730), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3750 = EDGE_CURVE ('', #3710, #3460, #3740, .T.);
#3760 = ORIENTED_EDGE ('', *, *, #3750, .F.);
#3770 = CARTESIAN_POINT ('', (12., 1.91421356237309, 0.));
#3780 = CARTESIAN_POINT ('', (12., 1.91421356237309, -5.56));
#3790 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#3770, #3780), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#3800 = EDGE_CURVE ('', #3710, #870, #3790, .T.);
#3810 = ORIENTED_EDGE ('', *, *, #3800, .T.);
#3820 = ORIENTED_EDGE ('', *, *, #910, .T.);
#3830 = ORIENTED_EDGE ('', *, *, #3560, .F.);
#3840 = EDGE_LOOP ('', (#3760, #3810, #3820, #3830));
#3850 = FACE_OUTER_BOUND ('', #3840, .T.);
#3860 = CARTESIAN_POINT ('', (12., 1.91421356237309, 0.));
#3870 = CARTESIAN_POINT ('', (12., 10.0857864376269, 0.));
#3880 = CARTESIAN_POINT ('', (12., 1.91421356237309, -5.56));
#3890 = CARTESIAN_POINT ('', (12., 10.0857864376269, -5.56));
#3900 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3860, #3870), (#3880, #3890)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#3910 = ADVANCED_FACE ('', (#3850), #3900, .T.);
#3920 = CARTESIAN_POINT ('', (11.8535533905933, 1.56066017177982, 0.));
#3930 = VERTEX_POINT ('', #3920);
#3940 = CARTESIAN_POINT ('', (11.8535533905933, 1.56066017177982, 0.));
#3950 = CARTESIAN_POINT ('', (12., 1.70710678118655, 0.));
#3960 = CARTESIAN_POINT ('', (12., 1.91421356237309, 0.));
#3970 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#3940, #3950, #3960), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.923879532511287, 1.))
   REPRESENTATION_ITEM ('')
);
#3980 = EDGE_CURVE ('', #3930, #3710, #3970, .T.);
#3990 = ORIENTED_EDGE ('', *, *, #3980, .F.);
#4000 = CARTESIAN_POINT ('', (11.8535533905933, 1.56066017177982, 0.));
#4010 = CARTESIAN_POINT ('', (11.8535533905933, 1.56066017177982, -5.56));
#4020 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4000, #4010), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4030 = EDGE_CURVE ('', #3930, #940, #4020, .T.);
#4040 = ORIENTED_EDGE ('', *, *, #4030, .T.);
#4050 = ORIENTED_EDGE ('', *, *, #990, .T.);
#4060 = ORIENTED_EDGE ('', *, *, #3800, .F.);
#4070 = EDGE_LOOP ('', (#3990, #4040, #4050, #4060));
#4080 = FACE_OUTER_BOUND ('', #4070, .T.);
#4090 = CARTESIAN_POINT ('', (11.8535533905933, 1.56066017177982, 0.));
#4100 = CARTESIAN_POINT ('', (12., 1.70710678118655, 0.));
#4110 = CARTESIAN_POINT ('', (12., 1.91421356237309, 0.));
#4120 = CARTESIAN_POINT ('', (11.8535533905933, 1.56066017177982, -5.56));
#4130 = CARTESIAN_POINT ('', (12., 1.70710678118655, -5.56));
#4140 = CARTESIAN_POINT ('', (12., 1.91421356237309, -5.56));
#4150 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#4090, #4100, #4110), (#4120, #4130, #4140)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 3), (0., 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.923879532511287, 1.), (1., 0.923879532511287, 1.)))
   REPRESENTATION_ITEM ('')
);
#4160 = ADVANCED_FACE ('', (#4080), #4150, .T.);
#4170 = CARTESIAN_POINT ('', (10.4393398282202, 0.146446609406726, 0.));
#4180 = VERTEX_POINT ('', #4170);
#4190 = CARTESIAN_POINT ('', (10.4393398282202, 0.146446609406726, 0.));
#4200 = CARTESIAN_POINT ('', (11.8535533905933, 1.56066017177982, 0.));
#4210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4190, #4200), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4220 = EDGE_CURVE ('', #4180, #3930, #4210, .T.);
#4230 = ORIENTED_EDGE ('', *, *, #4220, .F.);
#4240 = CARTESIAN_POINT ('', (10.4393398282202, 0.146446609406726, 0.));
#4250 = CARTESIAN_POINT ('', (10.4393398282202, 0.146446609406726, -5.56));
#4260 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#4240, #4250), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#4270 = EDGE_CURVE ('', #4180, #1020, #4260, .T.);
#4280 = ORIENTED_EDGE ('', *, *, #4270, .T.);
#4290 = ORIENTED_EDGE ('', *, *, #1060, .T.);
#4300 = ORIENTED_EDGE ('', *, *, #4030, .F.);
#4310 = EDGE_LOOP ('', (#4230, #4280, #4290, #4300));
#4320 = FACE_OUTER_BOUND ('', #4310, .T.);
#4330 = CARTESIAN_POINT ('', (10.4393398282202, 0.146446609406726, 0.));
#4340 = CARTESIAN_POINT ('', (11.8535533905933, 1.56066017177982, 0.));
#4350 = CARTESIAN_POINT ('', (10.4393398282202, 0.146446609406726, -5.56));
#4360 = CARTESIAN_POINT ('', (11.8535533905933, 1.56066017177982, -5.56));
#4370 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4330, #4340), (#4350, #4360)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#4380 = ADVANCED_FACE ('', (#4320), #4370, .T.);
#4390 = CARTESIAN_POINT ('', (10.0857864376269, 0., 0.));
#4400 = VERTEX_POINT ('', #4390);
#4410 = CARTESIAN_POINT ('', (10.0857864376269, -5.55111512312578E-17, 0.));
#4420 = CARTESIAN_POINT ('', (10.2928932188135, -5.43149962565342E-17, 0.));
#4430 = CARTESIAN_POINT ('', (10.4393398282202, 0.146446609406726, 0.));
#4440 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4410, #4420, #4430), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.923879532511287, 1.))
   REPRESENTATION_ITEM ('')
);
#4450 = EDGE_CURVE ('', #4400, #4180, #4440, .T.);
#4460 = ORIENTED_EDGE ('', *, *, #4450, .F.);
#4470 = CARTESIAN_POINT ('', (10.0857864376269, 0., 0.));
#4480 = CARTESIAN_POINT ('', (10.0857864376269, 0., -5.56));
#4490 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4470, #4480), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4500 = EDGE_CURVE ('', #4400, #1090, #4490, .T.);
#4510 = ORIENTED_EDGE ('', *, *, #4500, .T.);
#4520 = ORIENTED_EDGE ('', *, *, #1140, .T.);
#4530 = ORIENTED_EDGE ('', *, *, #4270, .F.);
#4540 = EDGE_LOOP ('', (#4460, #4510, #4520, #4530));
#4550 = FACE_OUTER_BOUND ('', #4540, .T.);
#4560 = CARTESIAN_POINT ('', (10.0857864376269, -5.55111512312578E-17, 0.));
#4570 = CARTESIAN_POINT ('', (10.2928932188135, -5.43149962565342E-17, 0.));
#4580 = CARTESIAN_POINT ('', (10.4393398282202, 0.146446609406726, 0.));
#4590 = CARTESIAN_POINT ('', (10.0857864376269, -5.55111512312578E-17, -5.56));
#4600 = CARTESIAN_POINT ('', (10.2928932188135, -5.43149962565342E-17, -5.56));
#4610 = CARTESIAN_POINT ('', (10.4393398282202, 0.146446609406726, -5.56));
#4620 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#4560, #4570, #4580), (#4590, #4600, #4610)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 3), (0., 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.923879532511287, 1.), (1., 0.923879532511287, 1.)))
   REPRESENTATION_ITEM ('')
);
#4630 = ADVANCED_FACE ('', (#4550), #4620, .T.);
#4640 = CARTESIAN_POINT ('', (1.9142135623731, 0., 0.));
#4650 = VERTEX_POINT ('', #4640);
#4660 = CARTESIAN_POINT ('', (1.9142135623731, 0., 0.));
#4670 = CARTESIAN_POINT ('', (10.0857864376269, 0., 0.));
#4680 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4660, #4670), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4690 = EDGE_CURVE ('', #4650, #4400, #4680, .T.);
#4700 = ORIENTED_EDGE ('', *, *, #4690, .F.);
#4710 = CARTESIAN_POINT ('', (1.9142135623731, 0., 0.));
#4720 = CARTESIAN_POINT ('', (1.9142135623731, 0., -5.56));
#4730 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#4710, #4720), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#4740 = EDGE_CURVE ('', #4650, #40, #4730, .T.);
#4750 = ORIENTED_EDGE ('', *, *, #4740, .T.);
#4760 = ORIENTED_EDGE ('', *, *, #1190, .T.);
#4770 = ORIENTED_EDGE ('', *, *, #4500, .F.);
#4780 = EDGE_LOOP ('', (#4700, #4750, #4760, #4770));
#4790 = FACE_OUTER_BOUND ('', #4780, .T.);
#4800 = CARTESIAN_POINT ('', (1.9142135623731, 0., 0.));
#4810 = CARTESIAN_POINT ('', (10.0857864376269, 0., 0.));
#4820 = CARTESIAN_POINT ('', (1.9142135623731, 0., -5.56));
#4830 = CARTESIAN_POINT ('', (10.0857864376269, 0., -5.56));
#4840 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4800, #4810), (#4820, #4830)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#4850 = ADVANCED_FACE ('', (#4790), #4840, .T.);
#4860 = CARTESIAN_POINT ('', (1.56066017177982, 0.146446609406726, 0.));
#4870 = CARTESIAN_POINT ('', (1.70710678118655, -1.19615497472362E-18, 0.));
#4880 = CARTESIAN_POINT ('', (1.9142135623731, 0., 0.));
#4890 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4860, #4870, #4880), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.923879532511287, 1.))
   REPRESENTATION_ITEM ('')
);
#4900 = EDGE_CURVE ('', #1320, #4650, #4890, .T.);
#4910 = ORIENTED_EDGE ('', *, *, #4900, .F.);
#4920 = ORIENTED_EDGE ('', *, *, #1470, .T.);
#4930 = ORIENTED_EDGE ('', *, *, #90, .T.);
#4940 = ORIENTED_EDGE ('', *, *, #4740, .F.);
#4950 = EDGE_LOOP ('', (#4910, #4920, #4930, #4940));
#4960 = FACE_OUTER_BOUND ('', #4950, .T.);
#4970 = CARTESIAN_POINT ('', (1.56066017177982, 0.146446609406726, 0.));
#4980 = CARTESIAN_POINT ('', (1.70710678118655, -1.19615497472362E-18, 0.));
#4990 = CARTESIAN_POINT ('', (1.9142135623731, 0., 0.));
#5000 = CARTESIAN_POINT ('', (1.56066017177982, 0.146446609406726, -5.56));
#5010 = CARTESIAN_POINT ('', (1.70710678118655, -1.19615497472362E-18, -5.56));
#5020 = CARTESIAN_POINT ('', (1.9142135623731, 0., -5.56));
#5030 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#4970, #4980, #4990), (#5000, #5010, #5020)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 3), (0., 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.923879532511287, 1.), (1., 0.923879532511287, 1.)))
   REPRESENTATION_ITEM ('')
);
#5040 = ADVANCED_FACE ('', (#4960), #5030, .T.);
#5050 = ORIENTED_EDGE ('', *, *, #4900, .T.);
#5060 = ORIENTED_EDGE ('', *, *, #4690, .T.);
#5070 = ORIENTED_EDGE ('', *, *, #4450, .T.);
#5080 = ORIENTED_EDGE ('', *, *, #4220, .T.);
#5090 = ORIENTED_EDGE ('', *, *, #3980, .T.);
#5100 = ORIENTED_EDGE ('', *, *, #3750, .T.);
#5110 = ORIENTED_EDGE ('', *, *, #3510, .T.);
#5120 = ORIENTED_EDGE ('', *, *, #3280, .T.);
#5130 = ORIENTED_EDGE ('', *, *, #3040, .T.);
#5140 = ORIENTED_EDGE ('', *, *, #2810, .T.);
#5150 = ORIENTED_EDGE ('', *, *, #2570, .T.);
#5160 = ORIENTED_EDGE ('', *, *, #2340, .T.);
#5170 = ORIENTED_EDGE ('', *, *, #2100, .T.);
#5180 = ORIENTED_EDGE ('', *, *, #1870, .T.);
#5190 = ORIENTED_EDGE ('', *, *, #1630, .T.);
#5200 = ORIENTED_EDGE ('', *, *, #1360, .T.);
#5210 = EDGE_LOOP ('', (#5050, #5060, #5070, #5080, #5090, #5100, #5110, #5120, #5130, #5140, #5150, #5160, #5170, #5180, #5190, #5200));
#5220 = FACE_OUTER_BOUND ('', #5210, .T.);
#5230 = CARTESIAN_POINT ('', (15.3338095116624, -3.33380951166243, 0.));
#5240 = CARTESIAN_POINT ('', (-3.33380951166243, -3.33380951166243, 0.));
#5250 = CARTESIAN_POINT ('', (15.3338095116624, 15.3338095116624, 0.));
#5260 = CARTESIAN_POINT ('', (-3.33380951166243, 15.3338095116624, 0.));
#5270 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5230, #5240), (#5250, #5260)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#5280 = ADVANCED_FACE ('', (#5220), #5270, .T.);
#5290 = CLOSED_SHELL ('', (#1280, #1560, #1810, #2030, #2280, #2500, #2750, #2970, #3220, #3440, #3690, #3910, #4160, #4380, #4630, #4850, #5040, #5280));
#5300 = MANIFOLD_SOLID_BREP ('', #5290);
#5310 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#5320 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#5330 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#5340 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #5310, 'DISTANCE_ACCURACY_VALUE', '');
#5350 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#5340))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#5310, #5320, #5330))
   REPRESENTATION_CONTEXT ('', '3D')
);
#5360 = COLOUR_RGB ('', 1., 0.75, 0.);
#5370 = FILL_AREA_STYLE_COLOUR ('', #5360);
#5380 = FILL_AREA_STYLE ('', (#5370));
#5390 = SURFACE_STYLE_FILL_AREA (#5380);
#5400 = SURFACE_SIDE_STYLE ('', (#5390));
#5410 = SURFACE_STYLE_USAGE (.POSITIVE., #5400);
#5420 = PRESENTATION_STYLE_ASSIGNMENT ((#5410));
#5430 = STYLED_ITEM ('', (#5420), #5300);
#5440 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#5300), #5350);
#5450 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#5460 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #5450);
#5470 = MECHANICAL_CONTEXT ('', #5450, 'mechanical');
#5480 = PRODUCT ('product-name', '', '', (#5470));
#5490 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#5500 = PERSON ('', '', $, $, $, $);
#5510 = ORGANIZATION ($, '', '');
#5520 = PERSON_AND_ORGANIZATION (#5500, #5510);
#5530 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#5520, #5490, (#5480));
#5540 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#5480));
#5550 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #5480, .NOT_KNOWN.);
#5560 = APPROVAL_STATUS ('approved');
#5570 = APPROVAL (#5560, '');
#5580 = CALENDAR_DATE (2011, 24, 11);
#5590 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#5600 = LOCAL_TIME (13, 31, 3., #5590);
#5610 = DATE_AND_TIME (#5580, #5600);
#5620 = APPROVAL_DATE_TIME (#5610, #5570);
#5630 = APPROVAL_ROLE ('');
#5640 = PERSON ('', '', $, $, $, $);
#5650 = ORGANIZATION ($, '', '');
#5660 = PERSON_AND_ORGANIZATION (#5640, #5650);
#5670 = APPROVAL_PERSON_ORGANIZATION (#5660, #5570, #5630);
#5680 = CC_DESIGN_APPROVAL (#5570, (#5550));
#5690 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#5700 = PERSON ('', '', $, $, $, $);
#5710 = ORGANIZATION ($, '', '');
#5720 = PERSON_AND_ORGANIZATION (#5700, #5710);
#5730 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#5720, #5690, (#5550));
#5740 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#5750 = PERSON ('', '', $, $, $, $);
#5760 = ORGANIZATION ($, '', '');
#5770 = PERSON_AND_ORGANIZATION (#5750, #5760);
#5780 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#5770, #5740, (#5550));
#5790 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#5800 = SECURITY_CLASSIFICATION ('', '', #5790);
#5810 = APPROVAL_STATUS ('approved');
#5820 = APPROVAL (#5810, '');
#5830 = CALENDAR_DATE (2011, 24, 11);
#5840 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#5850 = LOCAL_TIME (13, 31, 3., #5840);
#5860 = DATE_AND_TIME (#5830, #5850);
#5870 = APPROVAL_DATE_TIME (#5860, #5820);
#5880 = APPROVAL_ROLE ('');
#5890 = PERSON ('', '', $, $, $, $);
#5900 = ORGANIZATION ($, '', '');
#5910 = PERSON_AND_ORGANIZATION (#5890, #5900);
#5920 = APPROVAL_PERSON_ORGANIZATION (#5910, #5820, #5880);
#5930 = CC_DESIGN_APPROVAL (#5820, (#5800));
#5940 = DATE_TIME_ROLE ('classification_date');
#5950 = CALENDAR_DATE (2011, 24, 11);
#5960 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#5970 = LOCAL_TIME (13, 31, 3., #5960);
#5980 = DATE_AND_TIME (#5950, #5970);
#5990 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#5980, #5940, (#5800));
#6000 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#6010 = PERSON ('', '', $, $, $, $);
#6020 = ORGANIZATION ($, '', '');
#6030 = PERSON_AND_ORGANIZATION (#6010, #6020);
#6040 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#6030, #6000, (#5800));
#6050 = CC_DESIGN_SECURITY_CLASSIFICATION (#5800, (#5550));
#6060 = DESIGN_CONTEXT ('', #5450, 'design');
#6070 = PRODUCT_DEFINITION ('', '', #5550, #6060);
#6080 = APPROVAL_STATUS ('approved');
#6090 = APPROVAL (#6080, '');
#6100 = CALENDAR_DATE (2011, 24, 11);
#6110 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#6120 = LOCAL_TIME (13, 31, 3., #6110);
#6130 = DATE_AND_TIME (#6100, #6120);
#6140 = APPROVAL_DATE_TIME (#6130, #6090);
#6150 = APPROVAL_ROLE ('');
#6160 = PERSON ('', '', $, $, $, $);
#6170 = ORGANIZATION ($, '', '');
#6180 = PERSON_AND_ORGANIZATION (#6160, #6170);
#6190 = APPROVAL_PERSON_ORGANIZATION (#6180, #6090, #6150);
#6200 = CC_DESIGN_APPROVAL (#6090, (#6070));
#6210 = DATE_TIME_ROLE ('creation_date');
#6220 = CALENDAR_DATE (2011, 24, 11);
#6230 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#6240 = LOCAL_TIME (13, 31, 3., #6230);
#6250 = DATE_AND_TIME (#6220, #6240);
#6260 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#6250, #6210, (#6070));
#6270 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#6280 = PERSON ('', '', $, $, $, $);
#6290 = ORGANIZATION ($, '', '');
#6300 = PERSON_AND_ORGANIZATION (#6280, #6290);
#6310 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#6300, #6270, (#6070));
#6320 = PRODUCT_DEFINITION_SHAPE ('', '', #6070);
#6330 = SHAPE_DEFINITION_REPRESENTATION (#6320, #5440);
ENDSEC;
END-ISO-10303-21;