ISO-10303-21;
HEADER;
FILE_DESCRIPTION ((), '1');
FILE_NAME ('q:\\ahmet kadagan\\arno\\sa\\testoutput\\2017.3.3_9.43.12\\step\\SA35-3003N-S1 AM5040.stp', '2017-03-03T11:15:22', ('Unknown'), ('TDM'), 'HarmonyWare STEP v2.0.2.9', 'T3D tool generator', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;

DATA;
#10 = CARTESIAN_POINT ('', (-0.655000000000001, 1.25, -6.86870943090415));
#20 = VERTEX_POINT ('', #10);
#30 = CARTESIAN_POINT ('', (-34.355, 1.25, -6.86870943090415));
#40 = VERTEX_POINT ('', #30);
#50 = CARTESIAN_POINT ('', (-0.655000000000001, 1.25, -6.86870943090415));
#60 = CARTESIAN_POINT ('', (-34.355, 1.25, -6.86870943090415));
#70 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#50, #60), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#80 = EDGE_CURVE ('', #20, #40, #70, .T.);
#90 = ORIENTED_EDGE ('', *, *, #80, .T.);
#100 = CARTESIAN_POINT ('', (-34.355, 1.25, -2.07765153731526));
#110 = VERTEX_POINT ('', #100);
#120 = CARTESIAN_POINT ('', (-34.355, 1.25, -6.86870943090415));
#130 = CARTESIAN_POINT ('', (-34.355, 1.25, -2.07765153731526));
#140 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#120, #130), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#150 = EDGE_CURVE ('', #40, #110, #140, .T.);
#160 = ORIENTED_EDGE ('', *, *, #150, .T.);
#170 = CARTESIAN_POINT ('', (-32.005, 1.25, -4.42765153731523));
#180 = VERTEX_POINT ('', #170);
#190 = CARTESIAN_POINT ('', (-34.355, 1.25, -2.07765153731526));
#200 = CARTESIAN_POINT ('', (-32.005, 1.25, -4.42765153731523));
#210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#190, #200), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#220 = EDGE_CURVE ('', #110, #180, #210, .T.);
#230 = ORIENTED_EDGE ('', *, *, #220, .T.);
#240 = CARTESIAN_POINT ('', (-32.005, 1.25, -1.99840144432528E-14));
#250 = VERTEX_POINT ('', #240);
#260 = CARTESIAN_POINT ('', (-32.005, 1.25, -4.42765153731523));
#270 = CARTESIAN_POINT ('', (-32.005, 1.25, -1.99840144432528E-14));
#280 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#260, #270), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#290 = EDGE_CURVE ('', #180, #250, #280, .T.);
#300 = ORIENTED_EDGE ('', *, *, #290, .T.);
#310 = CARTESIAN_POINT ('', (-32.655, 1.25, -1.99840144432528E-14));
#320 = VERTEX_POINT ('', #310);
#330 = CARTESIAN_POINT ('', (-32.005, 1.25, -1.99840144432528E-14));
#340 = CARTESIAN_POINT ('', (-32.655, 1.25, -1.99840144432528E-14));
#350 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#330, #340), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#360 = EDGE_CURVE ('', #250, #320, #350, .T.);
#370 = ORIENTED_EDGE ('', *, *, #360, .T.);
#380 = CARTESIAN_POINT ('', (-32.1437094309041, 1.25, 0.51129056909586));
#390 = VERTEX_POINT ('', #380);
#400 = CARTESIAN_POINT ('', (-32.655, 1.25, -1.99840144432528E-14));
#410 = CARTESIAN_POINT ('', (-32.1437094309041, 1.25, 0.51129056909586));
#420 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#400, #410), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#430 = EDGE_CURVE ('', #320, #390, #420, .T.);
#440 = ORIENTED_EDGE ('', *, *, #430, .T.);
#450 = CARTESIAN_POINT ('', (-2.8662905690959, 1.25, 0.51129056909586));
#460 = VERTEX_POINT ('', #450);
#470 = CARTESIAN_POINT ('', (-32.1437094309041, 1.25, 0.51129056909586));
#480 = CARTESIAN_POINT ('', (-2.8662905690959, 1.25, 0.51129056909586));
#490 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#470, #480), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#500 = EDGE_CURVE ('', #390, #460, #490, .T.);
#510 = ORIENTED_EDGE ('', *, *, #500, .T.);
#520 = CARTESIAN_POINT ('', (-2.355, 1.25, -1.99840144432528E-14));
#530 = VERTEX_POINT ('', #520);
#540 = CARTESIAN_POINT ('', (-2.355, 1.25, -1.99840144432528E-14));
#550 = CARTESIAN_POINT ('', (-2.8662905690959, 1.25, 0.51129056909586));
#560 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#540, #550), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#570 = EDGE_CURVE ('', #530, #460, #560, .T.);
#580 = ORIENTED_EDGE ('', *, *, #570, .F.);
#590 = CARTESIAN_POINT ('', (-3.005, 1.25, -1.99840144432528E-14));
#600 = VERTEX_POINT ('', #590);
#610 = CARTESIAN_POINT ('', (-3.005, 1.25, -1.99840144432528E-14));
#620 = CARTESIAN_POINT ('', (-2.355, 1.25, -1.99840144432528E-14));
#630 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#610, #620), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#640 = EDGE_CURVE ('', #600, #530, #630, .T.);
#650 = ORIENTED_EDGE ('', *, *, #640, .F.);
#660 = CARTESIAN_POINT ('', (-3.005, 1.25, -4.42765153731523));
#670 = VERTEX_POINT ('', #660);
#680 = CARTESIAN_POINT ('', (-3.005, 1.25, -4.42765153731523));
#690 = CARTESIAN_POINT ('', (-3.005, 1.25, -1.99840144432528E-14));
#700 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#680, #690), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#710 = EDGE_CURVE ('', #670, #600, #700, .T.);
#720 = ORIENTED_EDGE ('', *, *, #710, .F.);
#730 = CARTESIAN_POINT ('', (-0.655000000000001, 1.25, -2.07765153731526));
#740 = VERTEX_POINT ('', #730);
#750 = CARTESIAN_POINT ('', (-0.655000000000001, 1.25, -2.07765153731526));
#760 = CARTESIAN_POINT ('', (-3.005, 1.25, -4.42765153731523));
#770 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#750, #760), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#780 = EDGE_CURVE ('', #740, #670, #770, .T.);
#790 = ORIENTED_EDGE ('', *, *, #780, .F.);
#800 = CARTESIAN_POINT ('', (-0.655000000000001, 1.25, -6.86870943090415));
#810 = CARTESIAN_POINT ('', (-0.655000000000001, 1.25, -2.07765153731526));
#820 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#800, #810), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#830 = EDGE_CURVE ('', #20, #740, #820, .T.);
#840 = ORIENTED_EDGE ('', *, *, #830, .F.);
#850 = EDGE_LOOP ('', (#90, #160, #230, #300, #370, #440, #510, #580, #650, #720, #790, #840));
#860 = FACE_OUTER_BOUND ('', #850, .T.);
#870 = CARTESIAN_POINT ('', (-0.654, 1.25, -6.86970943090415));
#880 = CARTESIAN_POINT ('', (-0.654, 1.25, 0.512290569095861));
#890 = CARTESIAN_POINT ('', (-34.356, 1.25, -6.86970943090415));
#900 = CARTESIAN_POINT ('', (-34.356, 1.25, 0.512290569095861));
#910 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#870, #880), (#890, #900)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-34.351, -0.649000000000001), (0.062354012704632, 7.44435401270464), .UNSPECIFIED.);
#920 = ADVANCED_FACE ('', (#860), #910, .T.);
#930 = CARTESIAN_POINT ('', (-32.1437094309041, -1.25, 0.51129056909586));
#940 = VERTEX_POINT ('', #930);
#950 = CARTESIAN_POINT ('', (-2.8662905690959, -1.25, 0.51129056909586));
#960 = VERTEX_POINT ('', #950);
#970 = CARTESIAN_POINT ('', (-32.1437094309041, -1.25, 0.51129056909586));
#980 = CARTESIAN_POINT ('', (-2.8662905690959, -1.25, 0.51129056909586));
#990 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#970, #980), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1000 = EDGE_CURVE ('', #940, #960, #990, .T.);
#1010 = ORIENTED_EDGE ('', *, *, #1000, .F.);
#1020 = CARTESIAN_POINT ('', (-32.655, -1.25, -9.76996261670138E-15));
#1030 = VERTEX_POINT ('', #1020);
#1040 = CARTESIAN_POINT ('', (-32.1437094309041, -1.25, 0.51129056909586));
#1050 = CARTESIAN_POINT ('', (-32.655, -1.25, -9.76996261670138E-15));
#1060 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1040, #1050), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1070 = EDGE_CURVE ('', #940, #1030, #1060, .T.);
#1080 = ORIENTED_EDGE ('', *, *, #1070, .T.);
#1090 = CARTESIAN_POINT ('', (-32.005, -1.25, -1.99840144432528E-14));
#1100 = VERTEX_POINT ('', #1090);
#1110 = CARTESIAN_POINT ('', (-32.005, -1.25, -1.99840144432528E-14));
#1120 = CARTESIAN_POINT ('', (-32.655, -1.25, -9.76996261670138E-15));
#1130 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1110, #1120), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1140 = EDGE_CURVE ('', #1100, #1030, #1130, .T.);
#1150 = ORIENTED_EDGE ('', *, *, #1140, .F.);
#1160 = CARTESIAN_POINT ('', (-32.005, -1.25, -4.42765153731523));
#1170 = VERTEX_POINT ('', #1160);
#1180 = CARTESIAN_POINT ('', (-32.005, -1.25, -4.42765153731523));
#1190 = CARTESIAN_POINT ('', (-32.005, -1.25, -1.99840144432528E-14));
#1200 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1180, #1190), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1210 = EDGE_CURVE ('', #1170, #1100, #1200, .T.);
#1220 = ORIENTED_EDGE ('', *, *, #1210, .F.);
#1230 = CARTESIAN_POINT ('', (-34.355, -1.25, -2.07765153731526));
#1240 = VERTEX_POINT ('', #1230);
#1250 = CARTESIAN_POINT ('', (-34.355, -1.25, -2.07765153731526));
#1260 = CARTESIAN_POINT ('', (-32.005, -1.25, -4.42765153731523));
#1270 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1250, #1260), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1280 = EDGE_CURVE ('', #1240, #1170, #1270, .T.);
#1290 = ORIENTED_EDGE ('', *, *, #1280, .F.);
#1300 = CARTESIAN_POINT ('', (-34.355, -1.25, -6.86870943090415));
#1310 = VERTEX_POINT ('', #1300);
#1320 = CARTESIAN_POINT ('', (-34.355, -1.25, -6.86870943090415));
#1330 = CARTESIAN_POINT ('', (-34.355, -1.25, -2.07765153731526));
#1340 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1320, #1330), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1350 = EDGE_CURVE ('', #1310, #1240, #1340, .T.);
#1360 = ORIENTED_EDGE ('', *, *, #1350, .F.);
#1370 = CARTESIAN_POINT ('', (-0.655000000000001, -1.25, -6.86870943090415));
#1380 = VERTEX_POINT ('', #1370);
#1390 = CARTESIAN_POINT ('', (-0.655000000000001, -1.25, -6.86870943090415));
#1400 = CARTESIAN_POINT ('', (-34.355, -1.25, -6.86870943090415));
#1410 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1390, #1400), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1420 = EDGE_CURVE ('', #1380, #1310, #1410, .T.);
#1430 = ORIENTED_EDGE ('', *, *, #1420, .F.);
#1440 = CARTESIAN_POINT ('', (-0.655000000000001, -1.25, -2.07765153731526));
#1450 = VERTEX_POINT ('', #1440);
#1460 = CARTESIAN_POINT ('', (-0.655000000000001, -1.25, -6.86870943090415));
#1470 = CARTESIAN_POINT ('', (-0.655000000000001, -1.25, -2.07765153731526));
#1480 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1460, #1470), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1490 = EDGE_CURVE ('', #1380, #1450, #1480, .T.);
#1500 = ORIENTED_EDGE ('', *, *, #1490, .T.);
#1510 = CARTESIAN_POINT ('', (-3.005, -1.25, -4.42765153731523));
#1520 = VERTEX_POINT ('', #1510);
#1530 = CARTESIAN_POINT ('', (-0.655000000000001, -1.25, -2.07765153731526));
#1540 = CARTESIAN_POINT ('', (-3.005, -1.25, -4.42765153731523));
#1550 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1530, #1540), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1560 = EDGE_CURVE ('', #1450, #1520, #1550, .T.);
#1570 = ORIENTED_EDGE ('', *, *, #1560, .T.);
#1580 = CARTESIAN_POINT ('', (-3.005, -1.25, -1.99840144432528E-14));
#1590 = VERTEX_POINT ('', #1580);
#1600 = CARTESIAN_POINT ('', (-3.005, -1.25, -4.42765153731523));
#1610 = CARTESIAN_POINT ('', (-3.005, -1.25, -1.99840144432528E-14));
#1620 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1600, #1610), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1630 = EDGE_CURVE ('', #1520, #1590, #1620, .T.);
#1640 = ORIENTED_EDGE ('', *, *, #1630, .T.);
#1650 = CARTESIAN_POINT ('', (-2.355, -1.25, -9.76996261670138E-15));
#1660 = VERTEX_POINT ('', #1650);
#1670 = CARTESIAN_POINT ('', (-3.005, -1.25, -1.99840144432528E-14));
#1680 = CARTESIAN_POINT ('', (-2.355, -1.25, -9.76996261670138E-15));
#1690 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1670, #1680), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1700 = EDGE_CURVE ('', #1590, #1660, #1690, .T.);
#1710 = ORIENTED_EDGE ('', *, *, #1700, .T.);
#1720 = CARTESIAN_POINT ('', (-2.8662905690959, -1.25, 0.51129056909586));
#1730 = CARTESIAN_POINT ('', (-2.355, -1.25, -9.76996261670138E-15));
#1740 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1720, #1730), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1750 = EDGE_CURVE ('', #960, #1660, #1740, .T.);
#1760 = ORIENTED_EDGE ('', *, *, #1750, .F.);
#1770 = EDGE_LOOP ('', (#1010, #1080, #1150, #1220, #1290, #1360, #1430, #1500, #1570, #1640, #1710, #1760));
#1780 = FACE_OUTER_BOUND ('', #1770, .T.);
#1790 = CARTESIAN_POINT ('', (-34.356, -1.25, -6.86970943090415));
#1800 = CARTESIAN_POINT ('', (-34.356, -1.25, 0.512290569095861));
#1810 = CARTESIAN_POINT ('', (-0.654000000000007, -1.25, -6.86970943090415));
#1820 = CARTESIAN_POINT ('', (-0.654000000000007, -1.25, 0.512290569095861));
#1830 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1790, #1800), (#1810, #1820)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.649000000000001, 34.351), (0.062354012704632, 7.44435401270464), .UNSPECIFIED.);
#1840 = ADVANCED_FACE ('', (#1780), #1830, .T.);
#1850 = ORIENTED_EDGE ('', *, *, #1420, .T.);
#1860 = CARTESIAN_POINT ('', (-34.355, -1.25, -6.86870943090415));
#1870 = CARTESIAN_POINT ('', (-34.355, 1.25, -6.86870943090415));
#1880 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1860, #1870), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1890 = EDGE_CURVE ('', #1310, #40, #1880, .T.);
#1900 = ORIENTED_EDGE ('', *, *, #1890, .T.);
#1910 = ORIENTED_EDGE ('', *, *, #80, .F.);
#1920 = CARTESIAN_POINT ('', (-0.655000000000001, -1.25, -6.86870943090415));
#1930 = CARTESIAN_POINT ('', (-0.655000000000001, 1.25, -6.86870943090415));
#1940 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1920, #1930), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1950 = EDGE_CURVE ('', #1380, #20, #1940, .T.);
#1960 = ORIENTED_EDGE ('', *, *, #1950, .F.);
#1970 = EDGE_LOOP ('', (#1850, #1900, #1910, #1960));
#1980 = FACE_OUTER_BOUND ('', #1970, .T.);
#1990 = CARTESIAN_POINT ('', (-0.654, -1.251, -6.86870943090415));
#2000 = CARTESIAN_POINT ('', (-0.654, 1.251, -6.86870943090415));
#2010 = CARTESIAN_POINT ('', (-34.356, -1.251, -6.86870943090415));
#2020 = CARTESIAN_POINT ('', (-34.356, 1.251, -6.86870943090415));
#2030 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1990, #2000), (#2010, #2020)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.0979504719474988, 33.7999504719475), (-16.851, -14.349), .UNSPECIFIED.);
#2040 = ADVANCED_FACE ('', (#1980), #2030, .T.);
#2050 = ORIENTED_EDGE ('', *, *, #500, .F.);
#2060 = CARTESIAN_POINT ('', (-32.1437094309041, 1.25, 0.51129056909586));
#2070 = CARTESIAN_POINT ('', (-32.1437094309041, -1.25, 0.51129056909586));
#2080 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2060, #2070), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2090 = EDGE_CURVE ('', #390, #940, #2080, .T.);
#2100 = ORIENTED_EDGE ('', *, *, #2090, .T.);
#2110 = ORIENTED_EDGE ('', *, *, #1000, .T.);
#2120 = CARTESIAN_POINT ('', (-2.8662905690959, 1.25, 0.51129056909586));
#2130 = CARTESIAN_POINT ('', (-2.8662905690959, -1.25, 0.51129056909586));
#2140 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2120, #2130), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2150 = EDGE_CURVE ('', #460, #960, #2140, .T.);
#2160 = ORIENTED_EDGE ('', *, *, #2150, .F.);
#2170 = EDGE_LOOP ('', (#2050, #2100, #2110, #2160));
#2180 = FACE_OUTER_BOUND ('', #2170, .T.);
#2190 = CARTESIAN_POINT ('', (-32.1447094309041, -1.251, 0.51129056909586));
#2200 = CARTESIAN_POINT ('', (-32.1447094309041, 1.251, 0.51129056909586));
#2210 = CARTESIAN_POINT ('', (-2.8652905690959, -1.251, 0.51129056909586));
#2220 = CARTESIAN_POINT ('', (-2.8652905690959, 1.251, 0.51129056909586));
#2230 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2190, #2200), (#2210, #2220)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-31.8160891292042, -2.53667026739594), (-16.851, -14.349), .UNSPECIFIED.);
#2240 = ADVANCED_FACE ('', (#2180), #2230, .T.);
#2250 = ORIENTED_EDGE ('', *, *, #570, .T.);
#2260 = ORIENTED_EDGE ('', *, *, #2150, .T.);
#2270 = ORIENTED_EDGE ('', *, *, #1750, .T.);
#2280 = CARTESIAN_POINT ('', (-2.355, -1.25, -9.76996261670138E-15));
#2290 = CARTESIAN_POINT ('', (-2.355, 1.25, -1.99840144432528E-14));
#2300 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2280, #2290), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2310 = EDGE_CURVE ('', #1660, #530, #2300, .T.);
#2320 = ORIENTED_EDGE ('', *, *, #2310, .T.);
#2330 = EDGE_LOOP ('', (#2250, #2260, #2270, #2320));
#2340 = FACE_OUTER_BOUND ('', #2330, .T.);
#2350 = CARTESIAN_POINT ('', (-2.8672905690959, -1.251, 0.51229056909586));
#2360 = CARTESIAN_POINT ('', (-2.8672905690959, 1.251, 0.51229056909586));
#2370 = CARTESIAN_POINT ('', (-2.354, -1.251, -0.00100000000001943));
#2380 = CARTESIAN_POINT ('', (-2.354, 1.251, -0.00100000000001943));
#2390 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2350, #2360), (#2370, #2380)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00141421356237359, 0.72448827069123), (3.12548325765845, 5.62748325765845), .UNSPECIFIED.);
#2400 = ADVANCED_FACE ('', (#2340), #2390, .T.);
#2410 = CARTESIAN_POINT ('', (-0.335528652442701, -1.47245594562978, 0.));
#2420 = VERTEX_POINT ('', #2410);
#2430 = CARTESIAN_POINT ('', (-0.335528652442701, -1.47245594562978, 0.));
#2440 = CARTESIAN_POINT ('', (-3.005, -1.25, -1.99840144432528E-14));
#2450 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2430, #2440), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2460 = EDGE_CURVE ('', #2420, #1590, #2450, .T.);
#2470 = ORIENTED_EDGE ('', *, *, #2460, .F.);
#2480 = CARTESIAN_POINT ('', (-0.00499999999999901, -1.174419455944, 0.));
#2490 = VERTEX_POINT ('', #2480);
#2500 = CARTESIAN_POINT ('', (-0.335528652442701, -1.47245594562978, 0.));
#2510 = CARTESIAN_POINT ('', (-0.145331299662999, -1.48830572502808, 0.));
#2520 = CARTESIAN_POINT ('', (-0.00499999999999901, -1.36176949999732, 0.));
#2530 = CARTESIAN_POINT ('', (-0.00499999999999901, -1.174419455944, 0.));
#2540 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#2500, #2510, #2520, #2530), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (4.71238898038469, 6.36479556808525), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.785115065174203, 0.785115065174203, 1.))
   REPRESENTATION_ITEM ('')
);
#2550 = EDGE_CURVE ('', #2420, #2490, #2540, .T.);
#2560 = ORIENTED_EDGE ('', *, *, #2550, .T.);
#2570 = CARTESIAN_POINT ('', (-0.00499999999999901, 1.174419455944, 0.));
#2580 = VERTEX_POINT ('', #2570);
#2590 = CARTESIAN_POINT ('', (-0.00499999999999901, -1.174419455944, 0.));
#2600 = CARTESIAN_POINT ('', (-0.00499999999999901, 1.174419455944, 0.));
#2610 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2590, #2600), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2620 = EDGE_CURVE ('', #2490, #2580, #2610, .T.);
#2630 = ORIENTED_EDGE ('', *, *, #2620, .T.);
#2640 = CARTESIAN_POINT ('', (-0.335528652442701, 1.47245594562977, 0.));
#2650 = VERTEX_POINT ('', #2640);
#2660 = CARTESIAN_POINT ('', (-0.00499999999999901, 1.174419455944, 0.));
#2670 = CARTESIAN_POINT ('', (-0.00499999999999901, 1.36176949999732, 0.));
#2680 = CARTESIAN_POINT ('', (-0.145331299662999, 1.48830572502808, 0.));
#2690 = CARTESIAN_POINT ('', (-0.335528652442701, 1.47245594562977, 0.));
#2700 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#2660, #2670, #2680, #2690), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (6.20157504627392, 7.85398163397448), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.785115065174203, 0.785115065174203, 1.))
   REPRESENTATION_ITEM ('')
);
#2710 = EDGE_CURVE ('', #2580, #2650, #2700, .T.);
#2720 = ORIENTED_EDGE ('', *, *, #2710, .T.);
#2730 = CARTESIAN_POINT ('', (-0.335528652442701, 1.47245594562977, 0.));
#2740 = CARTESIAN_POINT ('', (-3.005, 1.25, -1.99840144432528E-14));
#2750 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2730, #2740), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2760 = EDGE_CURVE ('', #2650, #600, #2750, .T.);
#2770 = ORIENTED_EDGE ('', *, *, #2760, .T.);
#2780 = ORIENTED_EDGE ('', *, *, #640, .T.);
#2790 = ORIENTED_EDGE ('', *, *, #2310, .F.);
#2800 = ORIENTED_EDGE ('', *, *, #1700, .F.);
#2810 = EDGE_LOOP ('', (#2470, #2560, #2630, #2720, #2770, #2780, #2790, #2800));
#2820 = FACE_OUTER_BOUND ('', #2810, .T.);
#2830 = CARTESIAN_POINT ('', (-3.006, -1.48830572502808, -1.99840144432528E-14));
#2840 = CARTESIAN_POINT ('', (-3.006, 1.48830572502808, -1.99840144432528E-14));
#2850 = CARTESIAN_POINT ('', (-0.00400000000000134, -1.48830572502808, 0.));
#2860 = CARTESIAN_POINT ('', (-0.00400000000000134, 1.48830572502808, 0.));
#2870 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2830, #2840), (#2850, #2860)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00100000000000122, 3.001), (2.88817753263037, 5.86478898268653), .UNSPECIFIED.);
#2880 = ADVANCED_FACE ('', (#2820), #2870, .T.);
#2890 = CARTESIAN_POINT ('', (-0.349464454272798, -1.14571408475461, -1.77211599158802));
#2900 = VERTEX_POINT ('', #2890);
#2910 = CARTESIAN_POINT ('', (-0.349464454272798, 1.1457140847546, -1.77211599158802));
#2920 = VERTEX_POINT ('', #2910);
#2930 = CARTESIAN_POINT ('', (-0.349464454272798, -1.14571408475461, -1.77211599158802));
#2940 = CARTESIAN_POINT ('', (-0.349464454272798, 1.1457140847546, -1.77211599158802));
#2950 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2930, #2940), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2960 = EDGE_CURVE ('', #2900, #2920, #2950, .T.);
#2970 = ORIENTED_EDGE ('', *, *, #2960, .F.);
#2980 = CARTESIAN_POINT ('', (-0.7597432200374, -1.43710473166355, -2.18239475735268));
#2990 = VERTEX_POINT ('', #2980);
#3000 = CARTESIAN_POINT ('', (-0.349464454272798, -1.14571408475461, -1.77211599158802));
#3010 = CARTESIAN_POINT ('', (-0.349464454272798, -1.33306412880792, -1.77211599158802));
#3020 = CARTESIAN_POINT ('', (-0.5236549578748, -1.45677875351044, -1.94630649519003));
#3030 = CARTESIAN_POINT ('', (-0.7597432200374, -1.43710473166355, -2.18239475735268));
#3040 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#3000, #3010, #3020, #3030), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (6.27246188278316, 7.92486847048372), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.785115065174206, 0.785115065174206, 1.))
   REPRESENTATION_ITEM ('')
);
#3050 = EDGE_CURVE ('', #2900, #2990, #3040, .T.);
#3060 = ORIENTED_EDGE ('', *, *, #3050, .T.);
#3070 = CARTESIAN_POINT ('', (-3.005, -1.25, -4.42765153731523));
#3080 = CARTESIAN_POINT ('', (-0.7597432200374, -1.43710473166355, -2.18239475735268));
#3090 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3070, #3080), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3100 = EDGE_CURVE ('', #1520, #2990, #3090, .T.);
#3110 = ORIENTED_EDGE ('', *, *, #3100, .F.);
#3120 = ORIENTED_EDGE ('', *, *, #1560, .F.);
#3130 = CARTESIAN_POINT ('', (-0.655000000000001, -1.25, -2.07765153731526));
#3140 = CARTESIAN_POINT ('', (-0.655000000000001, 1.25, -2.07765153731526));
#3150 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3130, #3140), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3160 = EDGE_CURVE ('', #1450, #740, #3150, .T.);
#3170 = ORIENTED_EDGE ('', *, *, #3160, .T.);
#3180 = ORIENTED_EDGE ('', *, *, #780, .T.);
#3190 = CARTESIAN_POINT ('', (-0.7597432200374, 1.43710473166355, -2.18239475735268));
#3200 = VERTEX_POINT ('', #3190);
#3210 = CARTESIAN_POINT ('', (-3.005, 1.25, -4.42765153731523));
#3220 = CARTESIAN_POINT ('', (-0.7597432200374, 1.43710473166355, -2.18239475735268));
#3230 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3210, #3220), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3240 = EDGE_CURVE ('', #670, #3200, #3230, .T.);
#3250 = ORIENTED_EDGE ('', *, *, #3240, .T.);
#3260 = CARTESIAN_POINT ('', (-0.7597432200374, 1.43710473166355, -2.18239475735268));
#3270 = CARTESIAN_POINT ('', (-0.5236549578748, 1.45677875351043, -1.94630649519003));
#3280 = CARTESIAN_POINT ('', (-0.349464454272798, 1.33306412880792, -1.77211599158802));
#3290 = CARTESIAN_POINT ('', (-0.349464454272798, 1.1457140847546, -1.77211599158802));
#3300 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#3260, #3270, #3280, #3290), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (4.64150214387546, 6.29390873157601), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.785115065174206, 0.785115065174206, 1.))
   REPRESENTATION_ITEM ('')
);
#3310 = EDGE_CURVE ('', #3200, #2920, #3300, .T.);
#3320 = ORIENTED_EDGE ('', *, *, #3310, .T.);
#3330 = EDGE_LOOP ('', (#2970, #3060, #3110, #3120, #3170, #3180, #3250, #3320));
#3340 = FACE_OUTER_BOUND ('', #3330, .T.);
#3350 = CARTESIAN_POINT ('', (-0.348464454272801, -1.45677875351044, -1.77111599158802));
#3360 = CARTESIAN_POINT ('', (-0.348464454272801, 1.45677875351043, -1.77111599158802));
#3370 = CARTESIAN_POINT ('', (-3.006, -1.45677875351044, -4.42865153731523));
#3380 = CARTESIAN_POINT ('', (-3.006, 1.45677875351043, -4.42865153731523));
#3390 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3350, #3360), (#3370, #3380)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-3.32481608513912, 0.433506726116899), (32.2932212464896, 35.2067787535104), .UNSPECIFIED.);
#3400 = ADVANCED_FACE ('', (#3340), #3390, .T.);
#3410 = ORIENTED_EDGE ('', *, *, #1490, .F.);
#3420 = ORIENTED_EDGE ('', *, *, #1950, .T.);
#3430 = ORIENTED_EDGE ('', *, *, #830, .T.);
#3440 = ORIENTED_EDGE ('', *, *, #3160, .F.);
#3450 = EDGE_LOOP ('', (#3410, #3420, #3430, #3440));
#3460 = FACE_OUTER_BOUND ('', #3450, .T.);
#3470 = CARTESIAN_POINT ('', (-0.655000000000001, -1.251, -6.86970943090415));
#3480 = CARTESIAN_POINT ('', (-0.655000000000001, -1.251, -2.07665153731526));
#3490 = CARTESIAN_POINT ('', (-0.655000000000001, 1.251, -6.86970943090415));
#3500 = CARTESIAN_POINT ('', (-0.655000000000001, 1.251, -2.07665153731526));
#3510 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3470, #3480), (#3490, #3500)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-35.001, -32.499), (0.207942106411113, 5.001), .UNSPECIFIED.);
#3520 = ADVANCED_FACE ('', (#3460), #3510, .T.);
#3530 = ORIENTED_EDGE ('', *, *, #2620, .F.);
#3540 = CARTESIAN_POINT ('', (-0.00499999999999901, -1.174419455944, 0.));
#3550 = CARTESIAN_POINT ('', (-0.349464454272798, -1.14571408475461, -1.77211599158802));
#3560 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3540, #3550), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3570 = EDGE_CURVE ('', #2490, #2900, #3560, .T.);
#3580 = ORIENTED_EDGE ('', *, *, #3570, .T.);
#3590 = ORIENTED_EDGE ('', *, *, #2960, .T.);
#3600 = CARTESIAN_POINT ('', (-0.349464454272798, 1.1457140847546, -1.77211599158802));
#3610 = CARTESIAN_POINT ('', (-0.00499999999999901, 1.174419455944, 4.44089209850063E-16));
#3620 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3600, #3610), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3630 = EDGE_CURVE ('', #2920, #2580, #3620, .T.);
#3640 = ORIENTED_EDGE ('', *, *, #3630, .T.);
#3650 = EDGE_LOOP ('', (#3530, #3580, #3590, #3640));
#3660 = FACE_OUTER_BOUND ('', #3650, .T.);
#3670 = CARTESIAN_POINT ('', (-0.0047762886305982, -1.175419455944, 0.00115089522399003));
#3680 = CARTESIAN_POINT ('', (-0.0047762886305982, 1.175419455944, 0.00115089522399003));
#3690 = CARTESIAN_POINT ('', (-0.349688165642203, -1.175419455944, -1.77326688681201));
#3700 = CARTESIAN_POINT ('', (-0.349688165642203, 1.175419455944, -1.77326688681201));
#3710 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3670, #3680), (#3690, #3700)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1.80645658220665, 0.00117243617882501), (32.574580544056, 34.925419455944), .UNSPECIFIED.);
#3720 = ADVANCED_FACE ('', (#3660), #3710, .T.);
#3730 = ORIENTED_EDGE ('', *, *, #2760, .F.);
#3740 = CARTESIAN_POINT ('', (-0.335528652442701, 1.47245594562977, 0.));
#3750 = CARTESIAN_POINT ('', (-0.7597432200374, 1.43710473166355, -2.18239475735268));
#3760 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3740, #3750), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3770 = EDGE_CURVE ('', #2650, #3200, #3760, .T.);
#3780 = ORIENTED_EDGE ('', *, *, #3770, .T.);
#3790 = ORIENTED_EDGE ('', *, *, #3240, .F.);
#3800 = ORIENTED_EDGE ('', *, *, #710, .T.);
#3810 = EDGE_LOOP ('', (#3730, #3780, #3790, #3800));
#3820 = FACE_OUTER_BOUND ('', #3810, .T.);
#3830 = CARTESIAN_POINT ('', (-0.3344527903737, 1.47254560080219, -4.42865153731523));
#3840 = CARTESIAN_POINT ('', (-0.3344527903737, 1.47254560080219, 0.000999999999999446));
#3850 = CARTESIAN_POINT ('', (-3.006075862069, 1.24991034482758, -4.42865153731523));
#3860 = CARTESIAN_POINT ('', (-3.006075862069, 1.24991034482758, 0.000999999999999446));
#3870 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3830, #3840), (#3850, #3860)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.330594744544403, 3.01147823593623), (2.1328726180898, 6.56252415540502), .UNSPECIFIED.);
#3880 = ADVANCED_FACE ('', (#3820), #3870, .T.);
#3890 = ORIENTED_EDGE ('', *, *, #3100, .T.);
#3900 = CARTESIAN_POINT ('', (-0.7597432200374, -1.43710473166355, -2.18239475735268));
#3910 = CARTESIAN_POINT ('', (-0.335528652442701, -1.47245594562978, -4.44089209850063E-16));
#3920 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3900, #3910), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3930 = EDGE_CURVE ('', #2990, #2420, #3920, .T.);
#3940 = ORIENTED_EDGE ('', *, *, #3930, .T.);
#3950 = ORIENTED_EDGE ('', *, *, #2460, .T.);
#3960 = ORIENTED_EDGE ('', *, *, #1630, .F.);
#3970 = EDGE_LOOP ('', (#3890, #3940, #3950, #3960));
#3980 = FACE_OUTER_BOUND ('', #3970, .T.);
#3990 = CARTESIAN_POINT ('', (-3.006075862069, -1.24991034482758, -4.42865153731523));
#4000 = CARTESIAN_POINT ('', (-3.006075862069, -1.24991034482759, 0.000999999999999446));
#4010 = CARTESIAN_POINT ('', (-0.3344527903737, -1.47254560080219, -4.42865153731523));
#4020 = CARTESIAN_POINT ('', (-0.3344527903737, -1.4725456008022, 0.000999999999999446));
#4030 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3990, #4000), (#4010, #4020)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.330594744544403, 3.01147823593623), (2.1328726180898, 6.56252415540502), .UNSPECIFIED.);
#4040 = ADVANCED_FACE ('', (#3980), #4030, .T.);
#4050 = ORIENTED_EDGE ('', *, *, #430, .F.);
#4060 = CARTESIAN_POINT ('', (-32.655, -1.25, -9.76996261670138E-15));
#4070 = CARTESIAN_POINT ('', (-32.655, 1.25, -1.99840144432528E-14));
#4080 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4060, #4070), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4090 = EDGE_CURVE ('', #1030, #320, #4080, .T.);
#4100 = ORIENTED_EDGE ('', *, *, #4090, .F.);
#4110 = ORIENTED_EDGE ('', *, *, #1070, .F.);
#4120 = ORIENTED_EDGE ('', *, *, #2090, .F.);
#4130 = EDGE_LOOP ('', (#4050, #4100, #4110, #4120));
#4140 = FACE_OUTER_BOUND ('', #4130, .T.);
#4150 = CARTESIAN_POINT ('', (-32.1427094309041, 1.251, 0.512290569095859));
#4160 = CARTESIAN_POINT ('', (-32.1427094309041, -1.251, 0.512290569095859));
#4170 = CARTESIAN_POINT ('', (-32.656, 1.251, -0.00100000000001987));
#4180 = CARTESIAN_POINT ('', (-32.656, -1.251, -0.00100000000001987));
#4190 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4150, #4160), (#4170, #4180)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00141421356237181, 0.72448827069123), (-5.62748325765845, -3.12548325765845), .UNSPECIFIED.);
#4200 = ADVANCED_FACE ('', (#4140), #4190, .T.);
#4210 = CARTESIAN_POINT ('', (-34.6744713475573, 1.47245594562978, 0.));
#4220 = VERTEX_POINT ('', #4210);
#4230 = CARTESIAN_POINT ('', (-34.6744713475573, 1.47245594562978, 0.));
#4240 = CARTESIAN_POINT ('', (-32.005, 1.25, -1.99840144432528E-14));
#4250 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4230, #4240), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4260 = EDGE_CURVE ('', #4220, #250, #4250, .T.);
#4270 = ORIENTED_EDGE ('', *, *, #4260, .F.);
#4280 = CARTESIAN_POINT ('', (-35.005, 1.17441945594401, 0.));
#4290 = VERTEX_POINT ('', #4280);
#4300 = CARTESIAN_POINT ('', (-34.6744713475573, 1.47245594562978, 0.));
#4310 = CARTESIAN_POINT ('', (-34.864668700337, 1.48830572502809, 4.44089209850063E-16));
#4320 = CARTESIAN_POINT ('', (-35.005, 1.36176949999733, 4.44089209850063E-16));
#4330 = CARTESIAN_POINT ('', (-35.005, 1.17441945594401, 0.));
#4340 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#4300, #4310, #4320, #4330), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (4.7123889803847, 6.36479556808525), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.785115065174206, 0.785115065174206, 1.))
   REPRESENTATION_ITEM ('')
);
#4350 = EDGE_CURVE ('', #4220, #4290, #4340, .T.);
#4360 = ORIENTED_EDGE ('', *, *, #4350, .T.);
#4370 = CARTESIAN_POINT ('', (-35.005, -1.17441945594401, 0.));
#4380 = VERTEX_POINT ('', #4370);
#4390 = CARTESIAN_POINT ('', (-35.005, -1.17441945594401, 0.));
#4400 = CARTESIAN_POINT ('', (-35.005, 1.17441945594401, 0.));
#4410 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4390, #4400), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4420 = EDGE_CURVE ('', #4380, #4290, #4410, .T.);
#4430 = ORIENTED_EDGE ('', *, *, #4420, .F.);
#4440 = CARTESIAN_POINT ('', (-34.6744713475573, -1.47245594562977, 0.));
#4450 = VERTEX_POINT ('', #4440);
#4460 = CARTESIAN_POINT ('', (-35.005, -1.17441945594401, 0.));
#4470 = CARTESIAN_POINT ('', (-35.005, -1.36176949999733, 0.));
#4480 = CARTESIAN_POINT ('', (-34.864668700337, -1.48830572502809, 0.));
#4490 = CARTESIAN_POINT ('', (-34.6744713475573, -1.47245594562977, 0.));
#4500 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#4460, #4470, #4480, #4490), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (6.20157504627392, 7.85398163397448), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.785115065174203, 0.785115065174203, 1.))
   REPRESENTATION_ITEM ('')
);
#4510 = EDGE_CURVE ('', #4380, #4450, #4500, .T.);
#4520 = ORIENTED_EDGE ('', *, *, #4510, .T.);
#4530 = CARTESIAN_POINT ('', (-34.6744713475573, -1.47245594562977, 0.));
#4540 = CARTESIAN_POINT ('', (-32.005, -1.25, -1.99840144432528E-14));
#4550 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4530, #4540), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4560 = EDGE_CURVE ('', #4450, #1100, #4550, .T.);
#4570 = ORIENTED_EDGE ('', *, *, #4560, .T.);
#4580 = ORIENTED_EDGE ('', *, *, #1140, .T.);
#4590 = ORIENTED_EDGE ('', *, *, #4090, .T.);
#4600 = ORIENTED_EDGE ('', *, *, #360, .F.);
#4610 = EDGE_LOOP ('', (#4270, #4360, #4430, #4520, #4570, #4580, #4590, #4600));
#4620 = FACE_OUTER_BOUND ('', #4610, .T.);
#4630 = CARTESIAN_POINT ('', (-32.004, 1.48830572502809, -1.99840144432528E-14));
#4640 = CARTESIAN_POINT ('', (-32.004, -1.48830572502809, -1.99840144432528E-14));
#4650 = CARTESIAN_POINT ('', (-35.006, 1.48830572502809, 0.));
#4660 = CARTESIAN_POINT ('', (-35.006, -1.48830572502809, 0.));
#4670 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4630, #4640), (#4650, #4660)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00100000000000122, 3.001), (-5.86478898268654, -2.88817753263036), .UNSPECIFIED.);
#4680 = ADVANCED_FACE ('', (#4620), #4670, .T.);
#4690 = CARTESIAN_POINT ('', (-34.6605355457272, -1.14571408475461, -1.77211599158802));
#4700 = VERTEX_POINT ('', #4690);
#4710 = CARTESIAN_POINT ('', (-34.6605355457272, 1.14571408475461, -1.77211599158802));
#4720 = VERTEX_POINT ('', #4710);
#4730 = CARTESIAN_POINT ('', (-34.6605355457272, -1.14571408475461, -1.77211599158802));
#4740 = CARTESIAN_POINT ('', (-34.6605355457272, 1.14571408475461, -1.77211599158802));
#4750 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4730, #4740), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4760 = EDGE_CURVE ('', #4700, #4720, #4750, .T.);
#4770 = ORIENTED_EDGE ('', *, *, #4760, .T.);
#4780 = CARTESIAN_POINT ('', (-34.2502567799626, 1.43710473166355, -2.18239475735267));
#4790 = VERTEX_POINT ('', #4780);
#4800 = CARTESIAN_POINT ('', (-34.6605355457272, 1.14571408475461, -1.77211599158802));
#4810 = CARTESIAN_POINT ('', (-34.6605355457272, 1.33306412880793, -1.77211599158802));
#4820 = CARTESIAN_POINT ('', (-34.4863450421252, 1.45677875351044, -1.94630649519003));
#4830 = CARTESIAN_POINT ('', (-34.2502567799626, 1.43710473166355, -2.18239475735267));
#4840 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#4800, #4810, #4820, #4830), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (6.27246188278316, 7.92486847048372), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.785115065174206, 0.785115065174206, 1.))
   REPRESENTATION_ITEM ('')
);
#4850 = EDGE_CURVE ('', #4720, #4790, #4840, .T.);
#4860 = ORIENTED_EDGE ('', *, *, #4850, .T.);
#4870 = CARTESIAN_POINT ('', (-32.005, 1.25, -4.42765153731523));
#4880 = CARTESIAN_POINT ('', (-34.2502567799626, 1.43710473166355, -2.18239475735267));
#4890 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4870, #4880), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4900 = EDGE_CURVE ('', #180, #4790, #4890, .T.);
#4910 = ORIENTED_EDGE ('', *, *, #4900, .F.);
#4920 = ORIENTED_EDGE ('', *, *, #220, .F.);
#4930 = CARTESIAN_POINT ('', (-34.355, -1.25, -2.07765153731526));
#4940 = CARTESIAN_POINT ('', (-34.355, 1.25, -2.07765153731526));
#4950 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4930, #4940), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4960 = EDGE_CURVE ('', #1240, #110, #4950, .T.);
#4970 = ORIENTED_EDGE ('', *, *, #4960, .F.);
#4980 = ORIENTED_EDGE ('', *, *, #1280, .T.);
#4990 = CARTESIAN_POINT ('', (-34.2502567799626, -1.43710473166355, -2.18239475735268));
#5000 = VERTEX_POINT ('', #4990);
#5010 = CARTESIAN_POINT ('', (-32.005, -1.25, -4.42765153731523));
#5020 = CARTESIAN_POINT ('', (-34.2502567799626, -1.43710473166355, -2.18239475735268));
#5030 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5010, #5020), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5040 = EDGE_CURVE ('', #1170, #5000, #5030, .T.);
#5050 = ORIENTED_EDGE ('', *, *, #5040, .T.);
#5060 = CARTESIAN_POINT ('', (-34.2502567799626, -1.43710473166355, -2.18239475735268));
#5070 = CARTESIAN_POINT ('', (-34.4863450421252, -1.45677875351044, -1.94630649519003));
#5080 = CARTESIAN_POINT ('', (-34.6605355457272, -1.33306412880793, -1.77211599158803));
#5090 = CARTESIAN_POINT ('', (-34.6605355457272, -1.14571408475461, -1.77211599158802));
#5100 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#5060, #5070, #5080, #5090), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (4.64150214387546, 6.29390873157601), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.785115065174206, 0.785115065174206, 1.))
   REPRESENTATION_ITEM ('')
);
#5110 = EDGE_CURVE ('', #5000, #4700, #5100, .T.);
#5120 = ORIENTED_EDGE ('', *, *, #5110, .T.);
#5130 = EDGE_LOOP ('', (#4770, #4860, #4910, #4920, #4970, #4980, #5050, #5120));
#5140 = FACE_OUTER_BOUND ('', #5130, .T.);
#5150 = CARTESIAN_POINT ('', (-34.6615355457272, 1.45677875351044, -1.77111599158802));
#5160 = CARTESIAN_POINT ('', (-34.6615355457272, -1.45677875351044, -1.77111599158802));
#5170 = CARTESIAN_POINT ('', (-32.004, 1.45677875351044, -4.42865153731523));
#5180 = CARTESIAN_POINT ('', (-32.004, -1.45677875351044, -4.42865153731523));
#5190 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5150, #5160), (#5170, #5180)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-3.32481608513912, 0.433506726116899), (-35.2067787535104, -32.2932212464896), .UNSPECIFIED.);
#5200 = ADVANCED_FACE ('', (#5140), #5190, .T.);
#5210 = ORIENTED_EDGE ('', *, *, #1350, .T.);
#5220 = ORIENTED_EDGE ('', *, *, #4960, .T.);
#5230 = ORIENTED_EDGE ('', *, *, #150, .F.);
#5240 = ORIENTED_EDGE ('', *, *, #1890, .F.);
#5250 = EDGE_LOOP ('', (#5210, #5220, #5230, #5240));
#5260 = FACE_OUTER_BOUND ('', #5250, .T.);
#5270 = CARTESIAN_POINT ('', (-34.355, -1.251, -2.07665153731526));
#5280 = CARTESIAN_POINT ('', (-34.355, -1.251, -6.86970943090415));
#5290 = CARTESIAN_POINT ('', (-34.355, 1.251, -2.07665153731526));
#5300 = CARTESIAN_POINT ('', (-34.355, 1.251, -6.86970943090415));
#5310 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5270, #5280), (#5290, #5300)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-35.001, -32.499), (-5.001, -0.207942106411113), .UNSPECIFIED.);
#5320 = ADVANCED_FACE ('', (#5260), #5310, .T.);
#5330 = ORIENTED_EDGE ('', *, *, #4420, .T.);
#5340 = CARTESIAN_POINT ('', (-35.005, 1.17441945594401, 0.));
#5350 = CARTESIAN_POINT ('', (-34.6605355457272, 1.14571408475461, -1.77211599158802));
#5360 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5340, #5350), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5370 = EDGE_CURVE ('', #4290, #4720, #5360, .T.);
#5380 = ORIENTED_EDGE ('', *, *, #5370, .T.);
#5390 = ORIENTED_EDGE ('', *, *, #4760, .F.);
#5400 = CARTESIAN_POINT ('', (-34.6605355457272, -1.14571408475461, -1.77211599158802));
#5410 = CARTESIAN_POINT ('', (-35.005, -1.17441945594401, 4.44089209850063E-16));
#5420 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5400, #5410), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5430 = EDGE_CURVE ('', #4700, #4380, #5420, .T.);
#5440 = ORIENTED_EDGE ('', *, *, #5430, .T.);
#5450 = EDGE_LOOP ('', (#5330, #5380, #5390, #5440));
#5460 = FACE_OUTER_BOUND ('', #5450, .T.);
#5470 = CARTESIAN_POINT ('', (-35.0052237113694, 1.17541945594401, 0.00115089522399003));
#5480 = CARTESIAN_POINT ('', (-35.0052237113694, -1.17541945594401, 0.00115089522399003));
#5490 = CARTESIAN_POINT ('', (-34.6603118343578, 1.17541945594401, -1.77326688681201));
#5500 = CARTESIAN_POINT ('', (-34.6603118343578, -1.17541945594401, -1.77326688681201));
#5510 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5470, #5480), (#5490, #5500)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1.80645658220665, 0.00117243617882412), (-34.925419455944, -32.574580544056), .UNSPECIFIED.);
#5520 = ADVANCED_FACE ('', (#5460), #5510, .T.);
#5530 = ORIENTED_EDGE ('', *, *, #4900, .T.);
#5540 = CARTESIAN_POINT ('', (-34.2502567799626, 1.43710473166355, -2.18239475735267));
#5550 = CARTESIAN_POINT ('', (-34.6744713475573, 1.47245594562978, 0.));
#5560 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5540, #5550), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5570 = EDGE_CURVE ('', #4790, #4220, #5560, .T.);
#5580 = ORIENTED_EDGE ('', *, *, #5570, .T.);
#5590 = ORIENTED_EDGE ('', *, *, #4260, .T.);
#5600 = ORIENTED_EDGE ('', *, *, #290, .F.);
#5610 = EDGE_LOOP ('', (#5530, #5580, #5590, #5600));
#5620 = FACE_OUTER_BOUND ('', #5610, .T.);
#5630 = CARTESIAN_POINT ('', (-34.6755472096263, 1.47254560080219, 0.00099999999999989));
#5640 = CARTESIAN_POINT ('', (-34.6755472096263, 1.47254560080219, -4.42865153731523));
#5650 = CARTESIAN_POINT ('', (-32.003924137931, 1.24991034482759, 0.00099999999999989));
#5660 = CARTESIAN_POINT ('', (-32.003924137931, 1.24991034482759, -4.42865153731523));
#5670 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5630, #5640), (#5650, #5660)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.330594744544399, 3.01147823593623), (-6.56252415540502, -2.1328726180898), .UNSPECIFIED.);
#5680 = ADVANCED_FACE ('', (#5620), #5670, .T.);
#5690 = ORIENTED_EDGE ('', *, *, #4560, .F.);
#5700 = CARTESIAN_POINT ('', (-34.6744713475573, -1.47245594562977, 0.));
#5710 = CARTESIAN_POINT ('', (-34.2502567799626, -1.43710473166355, -2.18239475735268));
#5720 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5700, #5710), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5730 = EDGE_CURVE ('', #4450, #5000, #5720, .T.);
#5740 = ORIENTED_EDGE ('', *, *, #5730, .T.);
#5750 = ORIENTED_EDGE ('', *, *, #5040, .F.);
#5760 = ORIENTED_EDGE ('', *, *, #1210, .T.);
#5770 = EDGE_LOOP ('', (#5690, #5740, #5750, #5760));
#5780 = FACE_OUTER_BOUND ('', #5770, .T.);
#5790 = CARTESIAN_POINT ('', (-32.003924137931, -1.24991034482759, 0.00099999999999989));
#5800 = CARTESIAN_POINT ('', (-32.003924137931, -1.24991034482758, -4.42865153731523));
#5810 = CARTESIAN_POINT ('', (-34.6755472096263, -1.47254560080219, 0.00099999999999989));
#5820 = CARTESIAN_POINT ('', (-34.6755472096263, -1.47254560080218, -4.42865153731523));
#5830 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5790, #5800), (#5810, #5820)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.330594744544403, 3.01147823593623), (-6.56252415540502, -2.1328726180898), .UNSPECIFIED.);
#5840 = ADVANCED_FACE ('', (#5780), #5830, .T.);
#5850 = ORIENTED_EDGE ('', *, *, #4350, .F.);
#5860 = ORIENTED_EDGE ('', *, *, #5570, .F.);
#5870 = ORIENTED_EDGE ('', *, *, #4850, .F.);
#5880 = ORIENTED_EDGE ('', *, *, #5370, .F.);
#5890 = EDGE_LOOP ('', (#5850, #5860, #5870, #5880));
#5900 = FACE_OUTER_BOUND ('', #5890, .T.);
#5910 = CARTESIAN_POINT ('', (-33.9358089519469, 1.13440156111196, -2.35600526160055));
#5920 = CARTESIAN_POINT ('', (-34.4609622082318, 1.17816433246911, 0.345674032019729));
#5930 = CARTESIAN_POINT ('', (-33.9348988651721, 1.43436364322626, -2.36068725217285));
#5940 = CARTESIAN_POINT ('', (-34.460052121457, 1.47812641458341, 0.340992041447436));
#5950 = CARTESIAN_POINT ('', (-34.2293870202064, 1.43436364322624, -2.41792995078581));
#5960 = CARTESIAN_POINT ('', (-34.7545402764913, 1.4781264145834, 0.283749342834474));
#5970 = CARTESIAN_POINT ('', (-34.5238751752407, 1.43436364322623, -2.47517264939877));
#5980 = CARTESIAN_POINT ('', (-35.0490284315256, 1.47812641458338, 0.226506644221513));
#5990 = CARTESIAN_POINT ('', (-34.5247852620155, 1.13440156111193, -2.47049065882648));
#6000 = CARTESIAN_POINT ('', (-35.0499385183004, 1.17816433246908, 0.231188634793806));
#6010 = CARTESIAN_POINT ('', (-34.5256953487903, 0.834439478997635, -2.46580866825418));
#6020 = CARTESIAN_POINT ('', (-35.0508486050752, 0.878202250354787, 0.2358706253661));
#6030 = CARTESIAN_POINT ('', (-34.231207193756, 0.834439478997649, -2.40856596964122));
#6040 = CARTESIAN_POINT ('', (-34.7563604500409, 0.878202250354801, 0.293113323979061));
#6050 = CARTESIAN_POINT ('', (-33.9367190387217, 0.834439478997663, -2.35132327102826));
#6060 = CARTESIAN_POINT ('', (-34.4618722950066, 0.878202250354815, 0.350356022592023));
#6070 = CARTESIAN_POINT ('', (-33.9358089519469, 1.13440156111196, -2.35600526160055));
#6080 = CARTESIAN_POINT ('', (-34.4609622082318, 1.17816433246911, 0.345674032019729));
#6090 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#5910, #5920), (#5930, #5940), (#5950, #5960), (#5970, #5980), (#5990, #6000), (#6010, #6020), (#6030, #6040), (#6050, #6060), (#6070, #6080)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.249999999999999, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#6100 = ADVANCED_FACE ('', (#5900), #6090, .T.);
#6110 = ORIENTED_EDGE ('', *, *, #5110, .F.);
#6120 = ORIENTED_EDGE ('', *, *, #5730, .F.);
#6130 = ORIENTED_EDGE ('', *, *, #4510, .F.);
#6140 = ORIENTED_EDGE ('', *, *, #5430, .F.);
#6150 = EDGE_LOOP ('', (#6110, #6120, #6130, #6140));
#6160 = FACE_OUTER_BOUND ('', #6150, .T.);
#6170 = CARTESIAN_POINT ('', (-33.9358089519469, -1.13440156111196, -2.35600526160056));
#6180 = CARTESIAN_POINT ('', (-34.4609622082318, -1.17816433246902, 0.345674032019733));
#6190 = CARTESIAN_POINT ('', (-33.9367190387217, -0.834439478997667, -2.35132327102827));
#6200 = CARTESIAN_POINT ('', (-34.4618722950066, -0.878202250354728, 0.350356022592016));
#6210 = CARTESIAN_POINT ('', (-34.231207193756, -0.834439478997655, -2.40856596964123));
#6220 = CARTESIAN_POINT ('', (-34.7563604500409, -0.878202250354716, 0.293113323979056));
#6230 = CARTESIAN_POINT ('', (-34.5256953487903, -0.834439478997643, -2.46580866825419));
#6240 = CARTESIAN_POINT ('', (-35.0508486050752, -0.878202250354704, 0.235870625366096));
#6250 = CARTESIAN_POINT ('', (-34.5247852620155, -1.13440156111194, -2.47049065882648));
#6260 = CARTESIAN_POINT ('', (-35.0499385183004, -1.178164332469, 0.231188634793812));
#6270 = CARTESIAN_POINT ('', (-34.5238751752407, -1.43436364322623, -2.47517264939876));
#6280 = CARTESIAN_POINT ('', (-35.0490284315255, -1.47812641458329, 0.226506644221529));
#6290 = CARTESIAN_POINT ('', (-34.2293870202064, -1.43436364322624, -2.4179299507858));
#6300 = CARTESIAN_POINT ('', (-34.7545402764912, -1.4781264145833, 0.283749342834489));
#6310 = CARTESIAN_POINT ('', (-33.9348988651721, -1.43436364322625, -2.36068725217284));
#6320 = CARTESIAN_POINT ('', (-34.4600521214569, -1.47812641458331, 0.340992041447449));
#6330 = CARTESIAN_POINT ('', (-33.9358089519469, -1.13440156111196, -2.35600526160056));
#6340 = CARTESIAN_POINT ('', (-34.4609622082318, -1.17816433246902, 0.345674032019733));
#6350 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#6170, #6180), (#6190, #6200), (#6210, #6220), (#6230, #6240), (#6250, #6260), (#6270, #6280), (#6290, #6300), (#6310, #6320), (#6330, #6340)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.750000000000001, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#6360 = ADVANCED_FACE ('', (#6160), #6350, .T.);
#6370 = ORIENTED_EDGE ('', *, *, #3050, .F.);
#6380 = ORIENTED_EDGE ('', *, *, #3570, .F.);
#6390 = ORIENTED_EDGE ('', *, *, #2550, .F.);
#6400 = ORIENTED_EDGE ('', *, *, #3930, .F.);
#6410 = EDGE_LOOP ('', (#6370, #6380, #6390, #6400));
#6420 = FACE_OUTER_BOUND ('', #6410, .T.);
#6430 = CARTESIAN_POINT ('', (-0.485214737984503, -1.13440156111196, -2.47049065882648));
#6440 = CARTESIAN_POINT ('', (0.0399385183003709, -1.17816433246896, 0.231188634793822));
#6450 = CARTESIAN_POINT ('', (-0.484304651209694, -0.834439478997662, -2.4658086682542));
#6460 = CARTESIAN_POINT ('', (0.0408486050751797, -0.878202250354664, 0.235870625366099));
#6470 = CARTESIAN_POINT ('', (-0.778792806243995, -0.834439478997674, -2.40856596964124));
#6480 = CARTESIAN_POINT ('', (-0.253639549959122, -0.878202250354675, 0.293113323979061));
#6490 = CARTESIAN_POINT ('', (-1.0732809612783, -0.834439478997685, -2.35132327102828));
#6500 = CARTESIAN_POINT ('', (-0.548127704993423, -0.878202250354686, 0.350356022592023));
#6510 = CARTESIAN_POINT ('', (-1.07419104805311, -1.13440156111198, -2.35600526160056));
#6520 = CARTESIAN_POINT ('', (-0.549037791768232, -1.17816433246898, 0.345674032019747));
#6530 = CARTESIAN_POINT ('', (-1.07510113482791, -1.43436364322628, -2.36068725217283));
#6540 = CARTESIAN_POINT ('', (-0.549947878543041, -1.47812641458328, 0.34099204144747));
#6550 = CARTESIAN_POINT ('', (-0.780612979793613, -1.43436364322627, -2.4179299507858));
#6560 = CARTESIAN_POINT ('', (-0.255459723508739, -1.47812641458327, 0.283749342834508));
#6570 = CARTESIAN_POINT ('', (-0.486124824759312, -1.43436364322626, -2.47517264939876));
#6580 = CARTESIAN_POINT ('', (0.039028431525562, -1.47812641458326, 0.226506644221546));
#6590 = CARTESIAN_POINT ('', (-0.485214737984503, -1.13440156111196, -2.47049065882648));
#6600 = CARTESIAN_POINT ('', (0.0399385183003709, -1.17816433246896, 0.231188634793822));
#6610 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#6430, #6440), (#6450, #6460), (#6470, #6480), (#6490, #6500), (#6510, #6520), (#6530, #6540), (#6550, #6560), (#6570, #6580), (#6590, #6600)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#6620 = ADVANCED_FACE ('', (#6420), #6610, .T.);
#6630 = ORIENTED_EDGE ('', *, *, #2710, .F.);
#6640 = ORIENTED_EDGE ('', *, *, #3630, .F.);
#6650 = ORIENTED_EDGE ('', *, *, #3310, .F.);
#6660 = ORIENTED_EDGE ('', *, *, #3770, .F.);
#6670 = EDGE_LOOP ('', (#6630, #6640, #6650, #6660));
#6680 = FACE_OUTER_BOUND ('', #6670, .T.);
#6690 = CARTESIAN_POINT ('', (-0.485214737984496, 1.13440156111195, -2.47049065882648));
#6700 = CARTESIAN_POINT ('', (0.0399385183003709, 1.17816433246895, 0.231188634793809));
#6710 = CARTESIAN_POINT ('', (-0.486124824759297, 1.43436364322624, -2.47517264939876));
#6720 = CARTESIAN_POINT ('', (0.0390284315255691, 1.47812641458324, 0.226506644221531));
#6730 = CARTESIAN_POINT ('', (-0.780612979793595, 1.43436364322626, -2.4179299507858));
#6740 = CARTESIAN_POINT ('', (-0.255459723508729, 1.47812641458326, 0.283749342834493));
#6750 = CARTESIAN_POINT ('', (-1.07510113482789, 1.43436364322628, -2.36068725217284));
#6760 = CARTESIAN_POINT ('', (-0.549947878543026, 1.47812641458328, 0.340992041447455));
#6770 = CARTESIAN_POINT ('', (-1.07419104805309, 1.13440156111199, -2.35600526160056));
#6780 = CARTESIAN_POINT ('', (-0.549037791768225, 1.17816433246898, 0.345674032019733));
#6790 = CARTESIAN_POINT ('', (-1.07328096127829, 0.834439478997693, -2.35132327102828));
#6800 = CARTESIAN_POINT ('', (-0.548127704993423, 0.878202250354689, 0.350356022592011));
#6810 = CARTESIAN_POINT ('', (-0.778792806243992, 0.834439478997675, -2.40856596964124));
#6820 = CARTESIAN_POINT ('', (-0.253639549959125, 0.87820225035467, 0.293113323979049));
#6830 = CARTESIAN_POINT ('', (-0.484304651209694, 0.834439478997656, -2.4658086682542));
#6840 = CARTESIAN_POINT ('', (0.0408486050751726, 0.878202250354652, 0.235870625366088));
#6850 = CARTESIAN_POINT ('', (-0.485214737984496, 1.13440156111195, -2.47049065882648));
#6860 = CARTESIAN_POINT ('', (0.0399385183003709, 1.17816433246895, 0.231188634793809));
#6870 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#6690, #6700), (#6710, #6720), (#6730, #6740), (#6750, #6760), (#6770, #6780), (#6790, #6800), (#6810, #6820), (#6830, #6840), (#6850, #6860)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.250000000000001, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#6880 = ADVANCED_FACE ('', (#6680), #6870, .T.);
#6890 = CLOSED_SHELL ('', (#920, #1840, #2040, #2240, #2400, #2880, #3400, #3520, #3720, #3880, #4040, #4200, #4680, #5200, #5320, #5520, #5680, #5840, #6100, #6360, #6620, #6880));
#6900 = MANIFOLD_SOLID_BREP ('CUT', #6890);
#6910 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#6920 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#6930 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#6940 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #6910, 'DISTANCE_ACCURACY_VALUE', '');
#6950 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#6940))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#6910, #6920, #6930))
   REPRESENTATION_CONTEXT ('', '3D')
);
#6960 = COLOUR_RGB ('', 1., 0.74901960784314, 0.);
#6970 = FILL_AREA_STYLE_COLOUR ('', #6960);
#6980 = FILL_AREA_STYLE ('', (#6970));
#6990 = SURFACE_STYLE_FILL_AREA (#6980);
#7000 = SURFACE_SIDE_STYLE ('', (#6990));
#7010 = SURFACE_STYLE_USAGE (.POSITIVE., #7000);
#7020 = PRESENTATION_STYLE_ASSIGNMENT ((#7010));
#7030 = STYLED_ITEM ('', (#7020), #6900);
#7040 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#6900), #6950);
#7050 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#7060 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #7050);
#7070 = MECHANICAL_CONTEXT ('', #7050, 'mechanical');
#7080 = PRODUCT ('NONE', '', '', (#7070));
#7090 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#7100 = PERSON ('', '', $, $, $, $);
#7110 = ORGANIZATION ($, '', '');
#7120 = PERSON_AND_ORGANIZATION (#7100, #7110);
#7130 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#7120, #7090, (#7080));
#7140 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#7080));
#7150 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #7080, .NOT_KNOWN.);
#7160 = APPROVAL_STATUS ('approved');
#7170 = APPROVAL (#7160, '');
#7180 = CALENDAR_DATE (2017, 3, 3);
#7190 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#7200 = LOCAL_TIME (11, 15, 22., #7190);
#7210 = DATE_AND_TIME (#7180, #7200);
#7220 = APPROVAL_DATE_TIME (#7210, #7170);
#7230 = APPROVAL_ROLE ('');
#7240 = PERSON ('', '', $, $, $, $);
#7250 = ORGANIZATION ($, '', '');
#7260 = PERSON_AND_ORGANIZATION (#7240, #7250);
#7270 = APPROVAL_PERSON_ORGANIZATION (#7260, #7170, #7230);
#7280 = CC_DESIGN_APPROVAL (#7170, (#7150));
#7290 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#7300 = PERSON ('', '', $, $, $, $);
#7310 = ORGANIZATION ($, '', '');
#7320 = PERSON_AND_ORGANIZATION (#7300, #7310);
#7330 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#7320, #7290, (#7150));
#7340 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#7350 = PERSON ('', '', $, $, $, $);
#7360 = ORGANIZATION ($, '', '');
#7370 = PERSON_AND_ORGANIZATION (#7350, #7360);
#7380 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#7370, #7340, (#7150));
#7390 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#7400 = SECURITY_CLASSIFICATION ('', '', #7390);
#7410 = APPROVAL_STATUS ('approved');
#7420 = APPROVAL (#7410, '');
#7430 = CALENDAR_DATE (2017, 3, 3);
#7440 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#7450 = LOCAL_TIME (11, 15, 22., #7440);
#7460 = DATE_AND_TIME (#7430, #7450);
#7470 = APPROVAL_DATE_TIME (#7460, #7420);
#7480 = APPROVAL_ROLE ('');
#7490 = PERSON ('', '', $, $, $, $);
#7500 = ORGANIZATION ($, '', '');
#7510 = PERSON_AND_ORGANIZATION (#7490, #7500);
#7520 = APPROVAL_PERSON_ORGANIZATION (#7510, #7420, #7480);
#7530 = CC_DESIGN_APPROVAL (#7420, (#7400));
#7540 = DATE_TIME_ROLE ('classification_date');
#7550 = CALENDAR_DATE (2017, 3, 3);
#7560 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#7570 = LOCAL_TIME (11, 15, 22., #7560);
#7580 = DATE_AND_TIME (#7550, #7570);
#7590 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#7580, #7540, (#7400));
#7600 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#7610 = PERSON ('', '', $, $, $, $);
#7620 = ORGANIZATION ($, '', '');
#7630 = PERSON_AND_ORGANIZATION (#7610, #7620);
#7640 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#7630, #7600, (#7400));
#7650 = CC_DESIGN_SECURITY_CLASSIFICATION (#7400, (#7150));
#7660 = DESIGN_CONTEXT ('', #7050, 'design');
#7670 = PRODUCT_DEFINITION ('', '', #7150, #7660);
#7680 = APPROVAL_STATUS ('approved');
#7690 = APPROVAL (#7680, '');
#7700 = CALENDAR_DATE (2017, 3, 3);
#7710 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#7720 = LOCAL_TIME (11, 15, 22., #7710);
#7730 = DATE_AND_TIME (#7700, #7720);
#7740 = APPROVAL_DATE_TIME (#7730, #7690);
#7750 = APPROVAL_ROLE ('');
#7760 = PERSON ('', '', $, $, $, $);
#7770 = ORGANIZATION ($, '', '');
#7780 = PERSON_AND_ORGANIZATION (#7760, #7770);
#7790 = APPROVAL_PERSON_ORGANIZATION (#7780, #7690, #7750);
#7800 = CC_DESIGN_APPROVAL (#7690, (#7670));
#7810 = DATE_TIME_ROLE ('creation_date');
#7820 = CALENDAR_DATE (2017, 3, 3);
#7830 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#7840 = LOCAL_TIME (11, 15, 22., #7830);
#7850 = DATE_AND_TIME (#7820, #7840);
#7860 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#7850, #7810, (#7670));
#7870 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#7880 = PERSON ('', '', $, $, $, $);
#7890 = ORGANIZATION ($, '', '');
#7900 = PERSON_AND_ORGANIZATION (#7880, #7890);
#7910 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#7900, #7870, (#7670));
#7920 = PRODUCT_DEFINITION_SHAPE ('', '', #7670);
#7930 = SHAPE_DEFINITION_REPRESENTATION (#7920, #7040);
ENDSEC;
END-ISO-10303-21;