ISO-10303-21;
HEADER;
FILE_DESCRIPTION ((), '1');
FILE_NAME ('Q:\\Ahmed Kadagan_c\\Arno_SA\\rechte spiegeln\\TestOutput\\2017.3.7_9.42.46\\step\\SA24-3003L-M1 AP2240_mirrored.stp', '2017-03-07T10:42:49', ('TDM Systems GmbH'), ('TDM Systems GmbH'), 'HarmonyWare STEP v2.0.2.9', 'TDM', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;

DATA;
#10 = CARTESIAN_POINT ('', (-0.9245424824349, -1.25, -4.77870943090291));
#20 = VERTEX_POINT ('', #10);
#30 = CARTESIAN_POINT ('', (-22.6964586017132, -1.25, -4.77870943090291));
#40 = VERTEX_POINT ('', #30);
#50 = CARTESIAN_POINT ('', (-0.9245424824349, -1.25, -4.77870943090291));
#60 = CARTESIAN_POINT ('', (-22.6964586017132, -1.25, -4.77870943090291));
#70 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#50, #60), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#80 = EDGE_CURVE ('', #20, #40, #70, .T.);
#90 = ORIENTED_EDGE ('', *, *, #80, .T.);
#100 = CARTESIAN_POINT ('', (-23.2483235462545, -1.25, -2.05432799106075));
#110 = VERTEX_POINT ('', #100);
#120 = CARTESIAN_POINT ('', (-22.6964586017127, -1.25, -4.77870943090587));
#130 = CARTESIAN_POINT ('', (-22.9606160130336, -1.25, -3.48755518982184));
#140 = CARTESIAN_POINT ('', (-23.2483235462542, -1.25, -2.05432799106242));
#150 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#120, #130, #140), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (233.943313273569, 243.734294871691), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.996352015451617, 1.))
   REPRESENTATION_ITEM ('')
);
#160 = EDGE_CURVE ('', #40, #110, #150, .T.);
#170 = ORIENTED_EDGE ('', *, *, #160, .T.);
#180 = CARTESIAN_POINT ('', (-20.965, -1.25, -4.33765153731523));
#190 = VERTEX_POINT ('', #180);
#200 = CARTESIAN_POINT ('', (-23.2483235462545, -1.25, -2.05432799106075));
#210 = CARTESIAN_POINT ('', (-20.965, -1.25, -4.33765153731523));
#220 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#200, #210), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#230 = EDGE_CURVE ('', #110, #190, #220, .T.);
#240 = ORIENTED_EDGE ('', *, *, #230, .T.);
#250 = CARTESIAN_POINT ('', (-20.965, -1.25, 0.01999999999998));
#260 = VERTEX_POINT ('', #250);
#270 = CARTESIAN_POINT ('', (-20.965, -1.25, -4.33765153731523));
#280 = CARTESIAN_POINT ('', (-20.965, -1.25, 0.01999999999998));
#290 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#270, #280), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#300 = EDGE_CURVE ('', #190, #260, #290, .T.);
#310 = ORIENTED_EDGE ('', *, *, #300, .T.);
#320 = CARTESIAN_POINT ('', (-21.615, -1.25, 0.01999999999998));
#330 = VERTEX_POINT ('', #320);
#340 = CARTESIAN_POINT ('', (-20.965, -1.25, 0.01999999999998));
#350 = CARTESIAN_POINT ('', (-21.615, -1.25, 0.01999999999998));
#360 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#340, #350), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#370 = EDGE_CURVE ('', #260, #330, #360, .T.);
#380 = ORIENTED_EDGE ('', *, *, #370, .T.);
#390 = CARTESIAN_POINT ('', (-21.1337094309029, -1.25, 0.5012905690971));
#400 = VERTEX_POINT ('', #390);
#410 = CARTESIAN_POINT ('', (-21.615, -1.25, 0.01999999999998));
#420 = CARTESIAN_POINT ('', (-21.1337094309029, -1.25, 0.5012905690971));
#430 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#410, #420), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#440 = EDGE_CURVE ('', #330, #400, #430, .T.);
#450 = ORIENTED_EDGE ('', *, *, #440, .T.);
#460 = CARTESIAN_POINT ('', (-2.79629056909712, -1.25, 0.5012905690971));
#470 = VERTEX_POINT ('', #460);
#480 = CARTESIAN_POINT ('', (-21.1337094309029, -1.25, 0.5012905690971));
#490 = CARTESIAN_POINT ('', (-2.79629056909712, -1.25, 0.5012905690971));
#500 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#480, #490), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#510 = EDGE_CURVE ('', #400, #470, #500, .T.);
#520 = ORIENTED_EDGE ('', *, *, #510, .T.);
#530 = CARTESIAN_POINT ('', (-2.315, -1.25, 0.01999999999998));
#540 = VERTEX_POINT ('', #530);
#550 = CARTESIAN_POINT ('', (-2.315, -1.25, 0.01999999999998));
#560 = CARTESIAN_POINT ('', (-2.79629056909712, -1.25, 0.5012905690971));
#570 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#550, #560), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#580 = EDGE_CURVE ('', #540, #470, #570, .T.);
#590 = ORIENTED_EDGE ('', *, *, #580, .F.);
#600 = CARTESIAN_POINT ('', (-2.965, -1.25, 0.01999999999998));
#610 = VERTEX_POINT ('', #600);
#620 = CARTESIAN_POINT ('', (-2.965, -1.25, 0.01999999999998));
#630 = CARTESIAN_POINT ('', (-2.315, -1.25, 0.01999999999998));
#640 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#620, #630), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#650 = EDGE_CURVE ('', #610, #540, #640, .T.);
#660 = ORIENTED_EDGE ('', *, *, #650, .F.);
#670 = CARTESIAN_POINT ('', (-2.965, -1.25, -4.33765153731523));
#680 = VERTEX_POINT ('', #670);
#690 = CARTESIAN_POINT ('', (-2.965, -1.25, -4.33765153731523));
#700 = CARTESIAN_POINT ('', (-2.965, -1.25, 0.01999999999998));
#710 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#690, #700), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#720 = EDGE_CURVE ('', #680, #610, #710, .T.);
#730 = ORIENTED_EDGE ('', *, *, #720, .F.);
#740 = CARTESIAN_POINT ('', (-0.615, -1.25, -1.98765153731526));
#750 = VERTEX_POINT ('', #740);
#760 = CARTESIAN_POINT ('', (-0.615, -1.25, -1.98765153731526));
#770 = CARTESIAN_POINT ('', (-2.965, -1.25, -4.33765153731523));
#780 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#760, #770), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#790 = EDGE_CURVE ('', #750, #680, #780, .T.);
#800 = ORIENTED_EDGE ('', *, *, #790, .F.);
#810 = CARTESIAN_POINT ('', (-0.615, -1.25, -3.18625140977911));
#820 = VERTEX_POINT ('', #810);
#830 = CARTESIAN_POINT ('', (-0.615, -1.25, -3.18625140977911));
#840 = CARTESIAN_POINT ('', (-0.615, -1.25, -1.98765153731526));
#850 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#830, #840), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#860 = EDGE_CURVE ('', #820, #750, #850, .T.);
#870 = ORIENTED_EDGE ('', *, *, #860, .F.);
#880 = CARTESIAN_POINT ('', (-0.9245424824349, -1.25, -4.77870943090291));
#890 = CARTESIAN_POINT ('', (-0.615, -1.25, -3.18625140977911));
#900 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#880, #890), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#910 = EDGE_CURVE ('', #20, #820, #900, .T.);
#920 = ORIENTED_EDGE ('', *, *, #910, .F.);
#930 = EDGE_LOOP ('', (#90, #170, #240, #310, #380, #450, #520, #590, #660, #730, #800, #870, #920));
#940 = FACE_OUTER_BOUND ('', #930, .F.);
#950 = CARTESIAN_POINT ('', (-23.2493235462545, -1.25, 0.5022905690971));
#960 = CARTESIAN_POINT ('', (-23.2493235462545, -1.25, -4.77970943090587));
#970 = CARTESIAN_POINT ('', (-0.614000000000004, -1.25, 0.5022905690971));
#980 = CARTESIAN_POINT ('', (-0.614000000000004, -1.25, -4.77970943090587));
#990 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#950, #960), (#970, #980)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.649000000000001, 23.2843235462545), (-5.34435401270588, -0.0623540127029116), .UNSPECIFIED.);
#1000 = ADVANCED_FACE ('', (#940), #990, .F.);
#1010 = CARTESIAN_POINT ('', (-1.2335413982868, 1.25, -4.77870943090291));
#1020 = VERTEX_POINT ('', #1010);
#1030 = CARTESIAN_POINT ('', (-23.0054575175651, 1.25, -4.77870943090291));
#1040 = VERTEX_POINT ('', #1030);
#1050 = CARTESIAN_POINT ('', (-1.2335413982868, 1.25, -4.77870943090291));
#1060 = CARTESIAN_POINT ('', (-23.0054575175651, 1.25, -4.77870943090291));
#1070 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1050, #1060), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1080 = EDGE_CURVE ('', #1020, #1040, #1070, .T.);
#1090 = ORIENTED_EDGE ('', *, *, #1080, .F.);
#1100 = CARTESIAN_POINT ('', (-0.681676453745501, 1.25, -2.05432799106075));
#1110 = VERTEX_POINT ('', #1100);
#1120 = CARTESIAN_POINT ('', (-1.23354139828677, 1.25, -4.77870943090276));
#1130 = CARTESIAN_POINT ('', (-0.969383986965948, 1.25, -3.48755518981892));
#1140 = CARTESIAN_POINT ('', (-0.68167645374535, 1.25, -2.05432799105982));
#1150 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1120, #1130, #1140), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (233.943313273581, 243.7342948717), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.996352015451619, 1.))
   REPRESENTATION_ITEM ('')
);
#1160 = EDGE_CURVE ('', #1020, #1110, #1150, .T.);
#1170 = ORIENTED_EDGE ('', *, *, #1160, .T.);
#1180 = CARTESIAN_POINT ('', (-2.965, 1.25, -4.33765153731523));
#1190 = VERTEX_POINT ('', #1180);
#1200 = CARTESIAN_POINT ('', (-0.681676453745501, 1.25, -2.05432799106075));
#1210 = CARTESIAN_POINT ('', (-2.965, 1.25, -4.33765153731523));
#1220 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1200, #1210), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1230 = EDGE_CURVE ('', #1110, #1190, #1220, .T.);
#1240 = ORIENTED_EDGE ('', *, *, #1230, .T.);
#1250 = CARTESIAN_POINT ('', (-2.965, 1.25, 0.0199999999999801));
#1260 = VERTEX_POINT ('', #1250);
#1270 = CARTESIAN_POINT ('', (-2.965, 1.25, -4.33765153731523));
#1280 = CARTESIAN_POINT ('', (-2.965, 1.25, 0.01999999999998));
#1290 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1270, #1280), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1300 = EDGE_CURVE ('', #1190, #1260, #1290, .T.);
#1310 = ORIENTED_EDGE ('', *, *, #1300, .T.);
#1320 = CARTESIAN_POINT ('', (-2.315, 1.25, 0.0199999999999903));
#1330 = VERTEX_POINT ('', #1320);
#1340 = CARTESIAN_POINT ('', (-2.965, 1.25, 0.0199999999999801));
#1350 = CARTESIAN_POINT ('', (-2.315, 1.25, 0.0199999999999903));
#1360 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1340, #1350), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1370 = EDGE_CURVE ('', #1260, #1330, #1360, .T.);
#1380 = ORIENTED_EDGE ('', *, *, #1370, .T.);
#1390 = CARTESIAN_POINT ('', (-2.79629056909712, 1.25, 0.5012905690971));
#1400 = VERTEX_POINT ('', #1390);
#1410 = CARTESIAN_POINT ('', (-2.79629056909712, 1.25, 0.5012905690971));
#1420 = CARTESIAN_POINT ('', (-2.315, 1.25, 0.0199999999999903));
#1430 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1410, #1420), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1440 = EDGE_CURVE ('', #1400, #1330, #1430, .T.);
#1450 = ORIENTED_EDGE ('', *, *, #1440, .F.);
#1460 = CARTESIAN_POINT ('', (-21.1337094309029, 1.25, 0.5012905690971));
#1470 = VERTEX_POINT ('', #1460);
#1480 = CARTESIAN_POINT ('', (-21.1337094309029, 1.25, 0.5012905690971));
#1490 = CARTESIAN_POINT ('', (-2.79629056909712, 1.25, 0.5012905690971));
#1500 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1480, #1490), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1510 = EDGE_CURVE ('', #1470, #1400, #1500, .T.);
#1520 = ORIENTED_EDGE ('', *, *, #1510, .F.);
#1530 = CARTESIAN_POINT ('', (-21.615, 1.25, 0.0199999999999903));
#1540 = VERTEX_POINT ('', #1530);
#1550 = CARTESIAN_POINT ('', (-21.1337094309029, 1.25, 0.5012905690971));
#1560 = CARTESIAN_POINT ('', (-21.615, 1.25, 0.0199999999999902));
#1570 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1550, #1560), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1580 = EDGE_CURVE ('', #1470, #1540, #1570, .T.);
#1590 = ORIENTED_EDGE ('', *, *, #1580, .T.);
#1600 = CARTESIAN_POINT ('', (-20.965, 1.25, 0.0199999999999801));
#1610 = VERTEX_POINT ('', #1600);
#1620 = CARTESIAN_POINT ('', (-20.965, 1.25, 0.0199999999999801));
#1630 = CARTESIAN_POINT ('', (-21.615, 1.25, 0.0199999999999903));
#1640 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1620, #1630), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1650 = EDGE_CURVE ('', #1610, #1540, #1640, .T.);
#1660 = ORIENTED_EDGE ('', *, *, #1650, .F.);
#1670 = CARTESIAN_POINT ('', (-20.965, 1.25, -4.33765153731523));
#1680 = VERTEX_POINT ('', #1670);
#1690 = CARTESIAN_POINT ('', (-20.965, 1.25, -4.33765153731523));
#1700 = CARTESIAN_POINT ('', (-20.965, 1.25, 0.01999999999998));
#1710 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1690, #1700), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1720 = EDGE_CURVE ('', #1680, #1610, #1710, .T.);
#1730 = ORIENTED_EDGE ('', *, *, #1720, .F.);
#1740 = CARTESIAN_POINT ('', (-23.315, 1.25, -1.98765153731526));
#1750 = VERTEX_POINT ('', #1740);
#1760 = CARTESIAN_POINT ('', (-23.315, 1.25, -1.98765153731526));
#1770 = CARTESIAN_POINT ('', (-20.965, 1.25, -4.33765153731523));
#1780 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1760, #1770), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1790 = EDGE_CURVE ('', #1750, #1680, #1780, .T.);
#1800 = ORIENTED_EDGE ('', *, *, #1790, .F.);
#1810 = CARTESIAN_POINT ('', (-23.315, 1.25, -3.18625140977912));
#1820 = VERTEX_POINT ('', #1810);
#1830 = CARTESIAN_POINT ('', (-23.315, 1.25, -3.18625140977912));
#1840 = CARTESIAN_POINT ('', (-23.315, 1.25, -1.98765153731526));
#1850 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1830, #1840), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1860 = EDGE_CURVE ('', #1820, #1750, #1850, .T.);
#1870 = ORIENTED_EDGE ('', *, *, #1860, .F.);
#1880 = CARTESIAN_POINT ('', (-23.0054575175651, 1.25, -4.77870943090291));
#1890 = CARTESIAN_POINT ('', (-23.315, 1.25, -3.18625140977912));
#1900 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1880, #1890), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1910 = EDGE_CURVE ('', #1040, #1820, #1900, .T.);
#1920 = ORIENTED_EDGE ('', *, *, #1910, .F.);
#1930 = EDGE_LOOP ('', (#1090, #1170, #1240, #1310, #1380, #1450, #1520, #1590, #1660, #1730, #1800, #1870, #1920));
#1940 = FACE_OUTER_BOUND ('', #1930, .F.);
#1950 = CARTESIAN_POINT ('', (-0.680676453745352, 1.25, 0.5022905690971));
#1960 = CARTESIAN_POINT ('', (-0.680676453745352, 1.25, -4.77970943090291));
#1970 = CARTESIAN_POINT ('', (-23.316, 1.25, 0.5022905690971));
#1980 = CARTESIAN_POINT ('', (-23.316, 1.25, -4.77970943090291));
#1990 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1950, #1960), (#1970, #1980)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-23.351, -0.715676453745351), (-5.34435401270588, -0.0623540127058702), .UNSPECIFIED.);
#2000 = ADVANCED_FACE ('', (#1940), #1990, .F.);
#2010 = CARTESIAN_POINT ('', (-1.1766891194594, 1.10493833804652, -4.77870943090291));
#2020 = VERTEX_POINT ('', #2010);
#2030 = CARTESIAN_POINT ('', (-1.1766891194594, 1.10493833804652, -4.77870943090291));
#2040 = CARTESIAN_POINT ('', (-0.9245424824349, -1.25, -4.77870943090291));
#2050 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2030, #2040), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2060 = EDGE_CURVE ('', #2020, #20, #2050, .T.);
#2070 = ORIENTED_EDGE ('', *, *, #2060, .F.);
#2080 = CARTESIAN_POINT ('', (-1.17668911945942, 1.10493833804652, -4.77870943090291));
#2090 = CARTESIAN_POINT ('', (-1.18526391342552, 1.18502313033208, -4.77870943090291));
#2100 = CARTESIAN_POINT ('', (-1.23354139828678, 1.25000000000002, -4.77870943090291));
#2110 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2080, #2090, #2100), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (1.32332183074374, 31.3792602426475), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.965799367464555, 1.))
   REPRESENTATION_ITEM ('')
);
#2120 = EDGE_CURVE ('', #2020, #1020, #2110, .T.);
#2130 = ORIENTED_EDGE ('', *, *, #2120, .T.);
#2140 = ORIENTED_EDGE ('', *, *, #1080, .T.);
#2150 = CARTESIAN_POINT ('', (-22.7533108805406, -1.10493833804652, -4.77870943090291));
#2160 = VERTEX_POINT ('', #2150);
#2170 = CARTESIAN_POINT ('', (-22.7533108805406, -1.10493833804652, -4.77870943090291));
#2180 = CARTESIAN_POINT ('', (-23.0054575175651, 1.25, -4.77870943090291));
#2190 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2170, #2180), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2200 = EDGE_CURVE ('', #2160, #1040, #2190, .T.);
#2210 = ORIENTED_EDGE ('', *, *, #2200, .F.);
#2220 = CARTESIAN_POINT ('', (-22.7533108805406, -1.10493833804652, -4.77870943090291));
#2230 = CARTESIAN_POINT ('', (-22.7447360865745, -1.18502313033208, -4.77870943090291));
#2240 = CARTESIAN_POINT ('', (-22.6964586017132, -1.25000000000002, -4.77870943090291));
#2250 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2220, #2230, #2240), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (1.32332183074373, 31.3792602426475), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.965799367464555, 1.))
   REPRESENTATION_ITEM ('')
);
#2260 = EDGE_CURVE ('', #2160, #40, #2250, .T.);
#2270 = ORIENTED_EDGE ('', *, *, #2260, .T.);
#2280 = ORIENTED_EDGE ('', *, *, #80, .F.);
#2290 = EDGE_LOOP ('', (#2070, #2130, #2140, #2210, #2270, #2280));
#2300 = FACE_OUTER_BOUND ('', #2290, .F.);
#2310 = CARTESIAN_POINT ('', (-23.0064575175651, -1.25100000000002, -4.77870943090291));
#2320 = CARTESIAN_POINT ('', (-23.0064575175651, 1.25100000000002, -4.77870943090291));
#2330 = CARTESIAN_POINT ('', (-0.923542482434901, -1.25100000000002, -4.77870943090291));
#2340 = CARTESIAN_POINT ('', (-0.923542482434901, 1.25100000000002, -4.77870943090291));
#2350 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2310, #2320), (#2330, #2340)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-23.1748311755939, -1.0919161404637), (4.84899999999998, 7.35100000000002), .UNSPECIFIED.);
#2360 = ADVANCED_FACE ('', (#2300), #2350, .F.);
#2370 = CARTESIAN_POINT ('', (-23.9264524680039, 1.13998305904121, 0.0200000000000001));
#2380 = VERTEX_POINT ('', #2370);
#2390 = CARTESIAN_POINT ('', (-23.6778363141209, -1.18198212417821, 0.0199999999999999));
#2400 = VERTEX_POINT ('', #2390);
#2410 = CARTESIAN_POINT ('', (-23.9264524680039, 1.13998305904121, 0.0200000000000001));
#2420 = CARTESIAN_POINT ('', (-23.6778363141209, -1.18198212417821, 0.0199999999999999));
#2430 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2410, #2420), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2440 = EDGE_CURVE ('', #2380, #2400, #2430, .T.);
#2450 = ORIENTED_EDGE ('', *, *, #2440, .F.);
#2460 = CARTESIAN_POINT ('', (-23.9281276421366, 1.17135483562177, 0.0200000000000023));
#2470 = VERTEX_POINT ('', #2460);
#2480 = CARTESIAN_POINT ('', (-23.9264524680039, 1.1399830590412, 0.0200000000000023));
#2490 = CARTESIAN_POINT ('', (-23.9281276421366, 1.15562844632234, 0.0200000000000024));
#2500 = CARTESIAN_POINT ('', (-23.9281276421366, 1.17135483562177, 0.0200000000000024));
#2510 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2480, #2490, #2500), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (169.324844226242, 175.456963569194), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.988434278053053, 0.979686426581538))
   REPRESENTATION_ITEM ('')
);
#2520 = EDGE_CURVE ('', #2380, #2470, #2510, .T.);
#2530 = ORIENTED_EDGE ('', *, *, #2520, .T.);
#2540 = CARTESIAN_POINT ('', (-23.5974983808178, 1.46937486506815, 0.0200000000000001));
#2550 = VERTEX_POINT ('', #2540);
#2560 = CARTESIAN_POINT ('', (-23.9281276421366, 1.17135483562177, 0.0200000000000024));
#2570 = CARTESIAN_POINT ('', (-23.9281276421366, 1.29360532992791, 0.0200000000000026));
#2580 = CARTESIAN_POINT ('', (-23.8410732753358, 1.38077553458572, 0.0200000000000019));
#2590 = CARTESIAN_POINT ('', (-23.7406760636397, 1.48130633863663, 0.020000000000001));
#2600 = CARTESIAN_POINT ('', (-23.5974983808178, 1.46937486506815, 0.0200000000000001));
#2610 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2560, #2570, #2580, #2590, #2600), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (175.456963569194, 219.662422113119, 269.999999999996), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.979686426581538, 0.91662457733412, 1., 0.905058855387174, 1.))
   REPRESENTATION_ITEM ('')
);
#2620 = EDGE_CURVE ('', #2470, #2550, #2610, .T.);
#2630 = ORIENTED_EDGE ('', *, *, #2620, .T.);
#2640 = CARTESIAN_POINT ('', (-23.5974983808178, 1.46937486506815, 0.0200000000000001));
#2650 = CARTESIAN_POINT ('', (-20.965, 1.25, 0.0199999999999801));
#2660 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2640, #2650), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2670 = EDGE_CURVE ('', #2550, #1610, #2660, .T.);
#2680 = ORIENTED_EDGE ('', *, *, #2670, .T.);
#2690 = ORIENTED_EDGE ('', *, *, #1650, .T.);
#2700 = CARTESIAN_POINT ('', (-21.615, 1.25, 0.0199999999999903));
#2710 = CARTESIAN_POINT ('', (-21.615, -1.25, 0.01999999999998));
#2720 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2700, #2710), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2730 = EDGE_CURVE ('', #1540, #330, #2720, .T.);
#2740 = ORIENTED_EDGE ('', *, *, #2730, .T.);
#2750 = ORIENTED_EDGE ('', *, *, #370, .F.);
#2760 = CARTESIAN_POINT ('', (-23.3490797162863, -1.44867330969052, 0.0199999999999999));
#2770 = VERTEX_POINT ('', #2760);
#2780 = CARTESIAN_POINT ('', (-23.3490797162863, -1.44867330969052, 0.0199999999999999));
#2790 = CARTESIAN_POINT ('', (-20.965, -1.25, 0.01999999999998));
#2800 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2780, #2790), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2810 = EDGE_CURVE ('', #2770, #260, #2800, .T.);
#2820 = ORIENTED_EDGE ('', *, *, #2810, .F.);
#2830 = CARTESIAN_POINT ('', (-23.3490797162863, -1.44867330969053, 0.0199999999999999));
#2840 = CARTESIAN_POINT ('', (-23.6466264090215, -1.47346886741844, 0.0200000000000021));
#2850 = CARTESIAN_POINT ('', (-23.6778363141209, -1.18198212417821, 0.0200000000000022));
#2860 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2830, #2840, #2850), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (270.000000000004, 358.676678169256), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.715225233631765, 1.))
   REPRESENTATION_ITEM ('')
);
#2870 = EDGE_CURVE ('', #2770, #2400, #2860, .T.);
#2880 = ORIENTED_EDGE ('', *, *, #2870, .T.);
#2890 = EDGE_LOOP ('', (#2450, #2530, #2630, #2680, #2690, #2740, #2750, #2820, #2880));
#2900 = FACE_OUTER_BOUND ('', #2890, .F.);
#2910 = CARTESIAN_POINT ('', (-23.9424704870319, 1.48230633863663, 0.0200000000000001));
#2920 = CARTESIAN_POINT ('', (-23.9424704870319, -1.47446886741844, 0.0199999999999999));
#2930 = CARTESIAN_POINT ('', (-20.964, 1.48230633863663, 0.0199999999999792));
#2940 = CARTESIAN_POINT ('', (-20.964, -1.47446886741844, 0.019999999999979));
#2950 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2910, #2920), (#2930, #2940)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-3.001, -0.0225295129680543), (2.8583213283496, 5.81509653440467), .UNSPECIFIED.);
#2960 = ADVANCED_FACE ('', (#2900), #2950, .F.);
#2970 = ORIENTED_EDGE ('', *, *, #230, .F.);
#2980 = CARTESIAN_POINT ('', (-22.8781115472991, -1.40942596227492, -2.4245399900162));
#2990 = VERTEX_POINT ('', #2980);
#3000 = CARTESIAN_POINT ('', (-23.2483235462545, -1.25, -2.05432799106075));
#3010 = CARTESIAN_POINT ('', (-23.1344886941592, -1.43079072451325, -2.168162843156));
#3020 = CARTESIAN_POINT ('', (-22.8781115472991, -1.40942596227492, -2.42453999001616));
#3030 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#3000, #3010, #3020), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (25.6543552035536, 94.0660765590193), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.82702307549425, 1.))
   REPRESENTATION_ITEM ('')
);
#3040 = EDGE_CURVE ('', #110, #2990, #3030, .T.);
#3050 = ORIENTED_EDGE ('', *, *, #3040, .T.);
#3060 = CARTESIAN_POINT ('', (-20.965, -1.25, -4.33765153731523));
#3070 = CARTESIAN_POINT ('', (-22.8781115472991, -1.40942596227492, -2.4245399900162));
#3080 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3060, #3070), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3090 = EDGE_CURVE ('', #190, #2990, #3080, .T.);
#3100 = ORIENTED_EDGE ('', *, *, #3090, .F.);
#3110 = EDGE_LOOP ('', (#2970, #3050, #3100));
#3120 = FACE_OUTER_BOUND ('', #3110, .F.);
#3130 = CARTESIAN_POINT ('', (-20.964, -1.249, -4.33865153731523));
#3140 = CARTESIAN_POINT ('', (-20.964, -1.43179072451324, -4.33865153731523));
#3150 = CARTESIAN_POINT ('', (-23.2493235462545, -1.249, -2.05332799106075));
#3160 = CARTESIAN_POINT ('', (-23.2493235462545, -1.43179072451324, -2.05332799106075));
#3170 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3130, #3140), (#3150, #3160)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.0928805316154477, 3.32481608513913), (34.999, 35.1817907245132), .UNSPECIFIED.);
#3180 = ADVANCED_FACE ('', (#3120), #3170, .F.);
#3190 = CARTESIAN_POINT ('', (-23.1765908412958, 1.43429923677465, -2.12606069601941));
#3200 = VERTEX_POINT ('', #3190);
#3210 = CARTESIAN_POINT ('', (-20.965, 1.25, -4.33765153731523));
#3220 = CARTESIAN_POINT ('', (-23.1765908412958, 1.43429923677465, -2.12606069601941));
#3230 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3210, #3220), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3240 = EDGE_CURVE ('', #1680, #3200, #3230, .T.);
#3250 = ORIENTED_EDGE ('', *, *, #3240, .T.);
#3260 = CARTESIAN_POINT ('', (-23.5878879252665, 1.1430015258826, -1.71476361204874));
#3270 = VERTEX_POINT ('', #3260);
#3280 = CARTESIAN_POINT ('', (-23.1765908412958, 1.43429923677465, -2.12606069601943));
#3290 = CARTESIAN_POINT ('', (-23.3547014029546, 1.44914178357956, -1.94795013436063));
#3300 = CARTESIAN_POINT ('', (-23.4795937982759, 1.35065224483074, -1.82305773903936));
#3310 = CARTESIAN_POINT ('', (-23.5878879252665, 1.26525202018875, -1.71476361204874));
#3320 = CARTESIAN_POINT ('', (-23.5878879252665, 1.1430015258826, -1.71476361204874));
#3330 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#3280, #3290, #3300, #3310, #3320), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (85.9431006022161, 136.280678489098, 180.486137033024), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.905058855387157, 1., 0.916624577334109, 0.979686426581531))
   REPRESENTATION_ITEM ('')
);
#3340 = EDGE_CURVE ('', #3200, #3270, #3330, .T.);
#3350 = ORIENTED_EDGE ('', *, *, #3340, .T.);
#3360 = CARTESIAN_POINT ('', (-23.585804037612, 1.11159568984186, -1.71684749970331));
#3370 = VERTEX_POINT ('', #3360);
#3380 = CARTESIAN_POINT ('', (-23.5878879252665, 1.1430015258826, -1.71476361204874));
#3390 = CARTESIAN_POINT ('', (-23.5878879252665, 1.12727513658316, -1.71476361204874));
#3400 = CARTESIAN_POINT ('', (-23.5858040376119, 1.11159568984186, -1.71684749970331));
#3410 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#3380, #3390, #3400), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (180.486137033024, 186.618256375979), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.979686426581531, 0.988434278053049, 1.))
   REPRESENTATION_ITEM ('')
);
#3420 = EDGE_CURVE ('', #3270, #3370, #3410, .T.);
#3430 = ORIENTED_EDGE ('', *, *, #3420, .T.);
#3440 = CARTESIAN_POINT ('', (-23.315, -0.925969759402874, -1.98765153731526));
#3450 = VERTEX_POINT ('', #3440);
#3460 = CARTESIAN_POINT ('', (-23.315, -0.925969759402874, -1.98765153731526));
#3470 = CARTESIAN_POINT ('', (-23.585804037612, 1.11159568984186, -1.71684749970331));
#3480 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3460, #3470), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3490 = EDGE_CURVE ('', #3450, #3370, #3480, .T.);
#3500 = ORIENTED_EDGE ('', *, *, #3490, .F.);
#3510 = CARTESIAN_POINT ('', (-23.315, 1.25, -1.98765153731526));
#3520 = CARTESIAN_POINT ('', (-23.315, -0.925969759402873, -1.98765153731526));
#3530 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3510, #3520), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3540 = EDGE_CURVE ('', #1750, #3450, #3530, .T.);
#3550 = ORIENTED_EDGE ('', *, *, #3540, .F.);
#3560 = ORIENTED_EDGE ('', *, *, #1790, .T.);
#3570 = EDGE_LOOP ('', (#3250, #3350, #3430, #3500, #3550, #3560));
#3580 = FACE_OUTER_BOUND ('', #3570, .F.);
#3590 = CARTESIAN_POINT ('', (-20.964, 1.45014178357955, -4.33865153731523));
#3600 = CARTESIAN_POINT ('', (-20.964, -0.92696975940288, -4.33865153731523));
#3610 = CARTESIAN_POINT ('', (-23.6054861935972, 1.45014178357955, -1.6971653437181));
#3620 = CARTESIAN_POINT ('', (-23.6054861935972, -0.92696975940288, -1.6971653437181));
#3630 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3590, #3600), (#3610, #3620)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.410809514667243, 3.32481608513913), (32.2998582164204, 34.6769697594029), .UNSPECIFIED.);
#3640 = ADVANCED_FACE ('', (#3580), #3630, .F.);
#3650 = CARTESIAN_POINT ('', (-23.315, 1.25, -3.18625140977912));
#3660 = CARTESIAN_POINT ('', (-23.315, -0.925969759402873, -1.98765153731526));
#3670 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3650, #3660), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3680 = EDGE_CURVE ('', #1820, #3450, #3670, .T.);
#3690 = ORIENTED_EDGE ('', *, *, #3680, .F.);
#3700 = ORIENTED_EDGE ('', *, *, #1860, .T.);
#3710 = ORIENTED_EDGE ('', *, *, #3540, .T.);
#3720 = EDGE_LOOP ('', (#3690, #3700, #3710));
#3730 = FACE_OUTER_BOUND ('', #3720, .F.);
#3740 = CARTESIAN_POINT ('', (-23.315, -0.926969759402873, -3.18725140977912));
#3750 = CARTESIAN_POINT ('', (-23.315, -0.926969759402873, -1.98665153731526));
#3760 = CARTESIAN_POINT ('', (-23.315, 1.251, -3.18725140977912));
#3770 = CARTESIAN_POINT ('', (-23.315, 1.251, -1.98665153731526));
#3780 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3740, #3750), (#3760, #3770)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (32.499, 34.6769697594029), (1.80040012753614, 3.001), .UNSPECIFIED.);
#3790 = ADVANCED_FACE ('', (#3730), #3780, .F.);
#3800 = ORIENTED_EDGE ('', *, *, #3090, .T.);
#3810 = CARTESIAN_POINT ('', (-22.8781115472991, -1.40942596227492, -2.4245399900162));
#3820 = CARTESIAN_POINT ('', (-23.3490797162863, -1.44867330969052, 0.0200000000000005));
#3830 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3810, #3820), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3840 = EDGE_CURVE ('', #2990, #2770, #3830, .T.);
#3850 = ORIENTED_EDGE ('', *, *, #3840, .T.);
#3860 = ORIENTED_EDGE ('', *, *, #2810, .T.);
#3870 = ORIENTED_EDGE ('', *, *, #300, .F.);
#3880 = EDGE_LOOP ('', (#3800, #3850, #3860, #3870));
#3890 = FACE_OUTER_BOUND ('', #3880, .F.);
#3900 = CARTESIAN_POINT ('', (-20.963924137931, -1.24991034482758, -4.33865153731523));
#3910 = CARTESIAN_POINT ('', (-20.963924137931, -1.24991034482758, 0.020999999999999));
#3920 = CARTESIAN_POINT ('', (-23.3501555783553, -1.44876296486293, -4.33865153731523));
#3930 = CARTESIAN_POINT ('', (-23.3501555783553, -1.44876296486293, 0.020999999999999));
#3940 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3900, #3910), (#3920, #3930)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-3.01147823593627, -0.616975604539928), (2.1328726180898, 6.49252415540503), .UNSPECIFIED.);
#3950 = ADVANCED_FACE ('', (#3890), #3940, .F.);
#3960 = ORIENTED_EDGE ('', *, *, #2670, .F.);
#3970 = CARTESIAN_POINT ('', (-23.5974983808178, 1.46937486506815, 0.0200000000000001));
#3980 = CARTESIAN_POINT ('', (-23.1765908412958, 1.43429923677465, -2.12606069601941));
#3990 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3970, #3980), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4000 = EDGE_CURVE ('', #2550, #3200, #3990, .T.);
#4010 = ORIENTED_EDGE ('', *, *, #4000, .T.);
#4020 = ORIENTED_EDGE ('', *, *, #3240, .F.);
#4030 = ORIENTED_EDGE ('', *, *, #1720, .T.);
#4040 = EDGE_LOOP ('', (#3960, #4010, #4020, #4030));
#4050 = FACE_OUTER_BOUND ('', #4040, .F.);
#4060 = CARTESIAN_POINT ('', (-23.5985742428868, 1.46946452024056, -4.33865153731523));
#4070 = CARTESIAN_POINT ('', (-23.5985742428868, 1.46946452024056, 0.0209999999999999));
#4080 = CARTESIAN_POINT ('', (-20.963924137931, 1.24991034482758, -4.33865153731523));
#4090 = CARTESIAN_POINT ('', (-20.963924137931, 1.24991034482758, 0.0209999999999999));
#4100 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4060, #4070), (#4080, #4090)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-3.01147823593627, -0.367695867532149), (2.1328726180898, 6.49252415540503), .UNSPECIFIED.);
#4110 = ADVANCED_FACE ('', (#4050), #4100, .F.);
#4120 = CARTESIAN_POINT ('', (-0.5809202837137, 1.44867330969052, 0.0200000000000001));
#4130 = VERTEX_POINT ('', #4120);
#4140 = CARTESIAN_POINT ('', (-0.5809202837137, 1.44867330969052, 0.0200000000000001));
#4150 = CARTESIAN_POINT ('', (-2.965, 1.25, 0.0199999999999801));
#4160 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4140, #4150), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4170 = EDGE_CURVE ('', #4130, #1260, #4160, .T.);
#4180 = ORIENTED_EDGE ('', *, *, #4170, .F.);
#4190 = CARTESIAN_POINT ('', (-0.252163685879101, 1.18198212417821, 0.0200000000000001));
#4200 = VERTEX_POINT ('', #4190);
#4210 = CARTESIAN_POINT ('', (-0.5809202837137, 1.44867330969053, 0.0200000000000001));
#4220 = CARTESIAN_POINT ('', (-0.283373590978471, 1.47346886741844, 0.0200000000000023));
#4230 = CARTESIAN_POINT ('', (-0.252163685879122, 1.18198212417821, 0.0200000000000023));
#4240 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4210, #4220, #4230), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (270.000000000004, 358.676678169256), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.715225233631763, 1.))
   REPRESENTATION_ITEM ('')
);
#4250 = EDGE_CURVE ('', #4130, #4200, #4240, .T.);
#4260 = ORIENTED_EDGE ('', *, *, #4250, .T.);
#4270 = CARTESIAN_POINT ('', (-0.00354753199609981, -1.1399830590412, 0.0199999999999999));
#4280 = VERTEX_POINT ('', #4270);
#4290 = CARTESIAN_POINT ('', (-0.00354753199609981, -1.1399830590412, 0.0199999999999999));
#4300 = CARTESIAN_POINT ('', (-0.252163685879101, 1.18198212417821, 0.0200000000000001));
#4310 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4290, #4300), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4320 = EDGE_CURVE ('', #4280, #4200, #4310, .T.);
#4330 = ORIENTED_EDGE ('', *, *, #4320, .F.);
#4340 = CARTESIAN_POINT ('', (-0.332501619182201, -1.46937486506815, 0.0199999999999999));
#4350 = VERTEX_POINT ('', #4340);
#4360 = CARTESIAN_POINT ('', (-0.00354753199605717, -1.13998305904119, 0.0200000000000022));
#4370 = CARTESIAN_POINT ('', (0.0114704870319517, -1.2802447305348, 0.0200000000000026));
#4380 = CARTESIAN_POINT ('', (-0.0889267246641783, -1.38077553458571, 0.0200000000000017));
#4390 = CARTESIAN_POINT ('', (-0.189323936360303, -1.48130633863663, 0.0200000000000008));
#4400 = CARTESIAN_POINT ('', (-0.332501619182203, -1.46937486506814, 0.0199999999999999));
#4410 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4360, #4370, #4380, #4390, #4400), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (169.32484422624, 219.662422113118, 269.999999999996), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.90505885538717, 1., 0.90505885538717, 1.))
   REPRESENTATION_ITEM ('')
);
#4420 = EDGE_CURVE ('', #4280, #4350, #4410, .T.);
#4430 = ORIENTED_EDGE ('', *, *, #4420, .T.);
#4440 = CARTESIAN_POINT ('', (-0.332501619182201, -1.46937486506815, 0.0199999999999999));
#4450 = CARTESIAN_POINT ('', (-2.965, -1.25, 0.01999999999998));
#4460 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4440, #4450), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4470 = EDGE_CURVE ('', #4350, #610, #4460, .T.);
#4480 = ORIENTED_EDGE ('', *, *, #4470, .T.);
#4490 = ORIENTED_EDGE ('', *, *, #650, .T.);
#4500 = CARTESIAN_POINT ('', (-2.315, 1.25, 0.0199999999999903));
#4510 = CARTESIAN_POINT ('', (-2.315, -1.25, 0.01999999999998));
#4520 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4500, #4510), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4530 = EDGE_CURVE ('', #1330, #540, #4520, .T.);
#4540 = ORIENTED_EDGE ('', *, *, #4530, .F.);
#4550 = ORIENTED_EDGE ('', *, *, #1370, .F.);
#4560 = EDGE_LOOP ('', (#4180, #4260, #4330, #4430, #4480, #4490, #4540, #4550));
#4570 = FACE_OUTER_BOUND ('', #4560, .F.);
#4580 = CARTESIAN_POINT ('', (0.0124704870319512, -1.48230633863663, 0.0199999999999999));
#4590 = CARTESIAN_POINT ('', (0.0124704870319512, 1.47446886741844, 0.0200000000000001));
#4600 = CARTESIAN_POINT ('', (-2.966, -1.48230633863663, 0.0199999999999791));
#4610 = CARTESIAN_POINT ('', (-2.966, 1.47446886741844, 0.0199999999999793));
#4620 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4580, #4590), (#4600, #4610)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-3.001, -0.0225295129680489), (-5.82293400562286, -2.86615879956779), .UNSPECIFIED.);
#4630 = ADVANCED_FACE ('', (#4570), #4620, .F.);
#4640 = ORIENTED_EDGE ('', *, *, #1230, .F.);
#4650 = CARTESIAN_POINT ('', (-1.0518884527009, 1.40942596227492, -2.4245399900162));
#4660 = VERTEX_POINT ('', #4650);
#4670 = CARTESIAN_POINT ('', (-0.681676453745524, 1.25, -2.05432799106075));
#4680 = CARTESIAN_POINT ('', (-0.79551130584078, 1.43079072451325, -2.16816284315601));
#4690 = CARTESIAN_POINT ('', (-1.05188845270094, 1.40942596227492, -2.42453999001616));
#4700 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4670, #4680, #4690), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (25.6543552035536, 94.0660765590192), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.82702307549425, 1.))
   REPRESENTATION_ITEM ('')
);
#4710 = EDGE_CURVE ('', #1110, #4660, #4700, .T.);
#4720 = ORIENTED_EDGE ('', *, *, #4710, .T.);
#4730 = CARTESIAN_POINT ('', (-2.965, 1.25, -4.33765153731523));
#4740 = CARTESIAN_POINT ('', (-1.0518884527009, 1.40942596227492, -2.4245399900162));
#4750 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4730, #4740), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4760 = EDGE_CURVE ('', #1190, #4660, #4750, .T.);
#4770 = ORIENTED_EDGE ('', *, *, #4760, .F.);
#4780 = EDGE_LOOP ('', (#4640, #4720, #4770));
#4790 = FACE_OUTER_BOUND ('', #4780, .F.);
#4800 = CARTESIAN_POINT ('', (-2.966, 1.249, -4.33865153731523));
#4810 = CARTESIAN_POINT ('', (-2.966, 1.43179072451324, -4.33865153731523));
#4820 = CARTESIAN_POINT ('', (-0.680676453745495, 1.249, -2.05332799106076));
#4830 = CARTESIAN_POINT ('', (-0.680676453745495, 1.43179072451324, -2.05332799106076));
#4840 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4800, #4810), (#4820, #4830)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.0928805316154504, 3.32481608513913), (-32.501, -32.3182092754868), .UNSPECIFIED.);
#4850 = ADVANCED_FACE ('', (#4790), #4840, .F.);
#4860 = CARTESIAN_POINT ('', (-0.753409158704201, -1.43429923677465, -2.12606069601942));
#4870 = VERTEX_POINT ('', #4860);
#4880 = CARTESIAN_POINT ('', (-2.965, -1.25, -4.33765153731523));
#4890 = CARTESIAN_POINT ('', (-0.7534091587042, -1.43429923677465, -2.12606069601942));
#4900 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4880, #4890), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4910 = EDGE_CURVE ('', #680, #4870, #4900, .T.);
#4920 = ORIENTED_EDGE ('', *, *, #4910, .T.);
#4930 = CARTESIAN_POINT ('', (-0.344195962388001, -1.11159568984187, -1.71684749970331));
#4940 = VERTEX_POINT ('', #4930);
#4950 = CARTESIAN_POINT ('', (-0.753409158704187, -1.43429923677465, -2.12606069601943));
#4960 = CARTESIAN_POINT ('', (-0.575298597045387, -1.44914178357956, -1.94795013436063));
#4970 = CARTESIAN_POINT ('', (-0.450406201724117, -1.35065224483074, -1.82305773903936));
#4980 = CARTESIAN_POINT ('', (-0.325513806402849, -1.25216270608192, -1.69816534371809));
#4990 = CARTESIAN_POINT ('', (-0.344195962388063, -1.11159568984187, -1.71684749970331));
#5000 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4950, #4960, #4970, #4980, #4990), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (85.9431006022159, 136.280678489097, 186.618256375977), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.90505885538716, 1., 0.90505885538716, 1.))
   REPRESENTATION_ITEM ('')
);
#5010 = EDGE_CURVE ('', #4870, #4940, #5000, .T.);
#5020 = ORIENTED_EDGE ('', *, *, #5010, .T.);
#5030 = CARTESIAN_POINT ('', (-0.615, 0.925969759402849, -1.98765153731526));
#5040 = VERTEX_POINT ('', #5030);
#5050 = CARTESIAN_POINT ('', (-0.615, 0.925969759402849, -1.98765153731526));
#5060 = CARTESIAN_POINT ('', (-0.344195962388001, -1.11159568984187, -1.71684749970331));
#5070 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5050, #5060), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5080 = EDGE_CURVE ('', #5040, #4940, #5070, .T.);
#5090 = ORIENTED_EDGE ('', *, *, #5080, .F.);
#5100 = CARTESIAN_POINT ('', (-0.615, 0.925969759402849, -1.98765153731526));
#5110 = CARTESIAN_POINT ('', (-0.615, -1.25, -1.98765153731526));
#5120 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5100, #5110), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5130 = EDGE_CURVE ('', #5040, #750, #5120, .T.);
#5140 = ORIENTED_EDGE ('', *, *, #5130, .T.);
#5150 = ORIENTED_EDGE ('', *, *, #790, .T.);
#5160 = EDGE_LOOP ('', (#4920, #5020, #5090, #5140, #5150));
#5170 = FACE_OUTER_BOUND ('', #5160, .F.);
#5180 = CARTESIAN_POINT ('', (-2.966, -1.45014178357955, -4.33865153731523));
#5190 = CARTESIAN_POINT ('', (-2.966, 0.926969759402851, -4.33865153731523));
#5200 = CARTESIAN_POINT ('', (-0.324513806402841, -1.45014178357955, -1.6971653437181));
#5210 = CARTESIAN_POINT ('', (-0.324513806402841, 0.926969759402851, -1.6971653437181));
#5220 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5180, #5190), (#5200, #5210)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.410809514667236, 3.32481608513913), (-35.2001417835796, -32.8230302405971), .UNSPECIFIED.);
#5230 = ADVANCED_FACE ('', (#5170), #5220, .F.);
#5240 = CARTESIAN_POINT ('', (-0.615, -1.25, -3.18625140977911));
#5250 = CARTESIAN_POINT ('', (-0.615, 0.925969759402849, -1.98765153731526));
#5260 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5240, #5250), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5270 = EDGE_CURVE ('', #820, #5040, #5260, .T.);
#5280 = ORIENTED_EDGE ('', *, *, #5270, .F.);
#5290 = ORIENTED_EDGE ('', *, *, #860, .T.);
#5300 = ORIENTED_EDGE ('', *, *, #5130, .F.);
#5310 = EDGE_LOOP ('', (#5280, #5290, #5300));
#5320 = FACE_OUTER_BOUND ('', #5310, .F.);
#5330 = CARTESIAN_POINT ('', (-0.615, -1.251, -1.98665153731526));
#5340 = CARTESIAN_POINT ('', (-0.615, -1.251, -3.18725140977911));
#5350 = CARTESIAN_POINT ('', (-0.615, 0.926969759402859, -1.98665153731526));
#5360 = CARTESIAN_POINT ('', (-0.615, 0.926969759402859, -3.18725140977911));
#5370 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5330, #5340), (#5350, #5360)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (32.8230302405971, 35.001), (-3.001, -1.80040012753615), .UNSPECIFIED.);
#5380 = ADVANCED_FACE ('', (#5320), #5370, .F.);
#5390 = ORIENTED_EDGE ('', *, *, #4470, .F.);
#5400 = CARTESIAN_POINT ('', (-0.332501619182201, -1.46937486506815, 0.0199999999999999));
#5410 = CARTESIAN_POINT ('', (-0.753409158704201, -1.43429923677465, -2.12606069601942));
#5420 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5400, #5410), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5430 = EDGE_CURVE ('', #4350, #4870, #5420, .T.);
#5440 = ORIENTED_EDGE ('', *, *, #5430, .T.);
#5450 = ORIENTED_EDGE ('', *, *, #4910, .F.);
#5460 = ORIENTED_EDGE ('', *, *, #720, .T.);
#5470 = EDGE_LOOP ('', (#5390, #5440, #5450, #5460));
#5480 = FACE_OUTER_BOUND ('', #5470, .F.);
#5490 = CARTESIAN_POINT ('', (-2.96607586206897, -1.24991034482759, 0.0209999999999999));
#5500 = CARTESIAN_POINT ('', (-2.96607586206897, -1.24991034482759, -4.33865153731523));
#5510 = CARTESIAN_POINT ('', (-0.331425757113237, -1.46946452024057, 0.0209999999999999));
#5520 = CARTESIAN_POINT ('', (-0.331425757113237, -1.46946452024057, -4.33865153731523));
#5530 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5490, #5500), (#5510, #5520)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-3.01147823593617, -0.367695867532051), (-6.49252415540503, -2.1328726180898), .UNSPECIFIED.);
#5540 = ADVANCED_FACE ('', (#5480), #5530, .F.);
#5550 = ORIENTED_EDGE ('', *, *, #4760, .T.);
#5560 = CARTESIAN_POINT ('', (-1.0518884527009, 1.40942596227492, -2.4245399900162));
#5570 = CARTESIAN_POINT ('', (-0.5809202837137, 1.44867330969052, 0.02));
#5580 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5560, #5570), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5590 = EDGE_CURVE ('', #4660, #4130, #5580, .T.);
#5600 = ORIENTED_EDGE ('', *, *, #5590, .T.);
#5610 = ORIENTED_EDGE ('', *, *, #4170, .T.);
#5620 = ORIENTED_EDGE ('', *, *, #1300, .F.);
#5630 = EDGE_LOOP ('', (#5550, #5600, #5610, #5620));
#5640 = FACE_OUTER_BOUND ('', #5630, .F.);
#5650 = CARTESIAN_POINT ('', (-0.579844421644736, 1.44876296486294, 0.0210000000000008));
#5660 = CARTESIAN_POINT ('', (-0.579844421644736, 1.44876296486294, -4.33865153731523));
#5670 = CARTESIAN_POINT ('', (-2.96607586206897, 1.24991034482759, 0.0210000000000008));
#5680 = CARTESIAN_POINT ('', (-2.96607586206897, 1.24991034482759, -4.33865153731523));
#5690 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5650, #5660), (#5670, #5680)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-3.01147823593617, -0.61697560453983), (-6.49252415540503, -2.1328726180898), .UNSPECIFIED.);
#5700 = ADVANCED_FACE ('', (#5640), #5690, .F.);
#5710 = ORIENTED_EDGE ('', *, *, #510, .F.);
#5720 = CARTESIAN_POINT ('', (-21.1337094309029, -1.25, 0.5012905690971));
#5730 = CARTESIAN_POINT ('', (-21.1337094309029, 1.25, 0.5012905690971));
#5740 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5720, #5730), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5750 = EDGE_CURVE ('', #400, #1470, #5740, .T.);
#5760 = ORIENTED_EDGE ('', *, *, #5750, .T.);
#5770 = ORIENTED_EDGE ('', *, *, #1510, .T.);
#5780 = CARTESIAN_POINT ('', (-2.79629056909712, -1.25, 0.5012905690971));
#5790 = CARTESIAN_POINT ('', (-2.79629056909712, 1.25, 0.5012905690971));
#5800 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5780, #5790), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5810 = EDGE_CURVE ('', #470, #1400, #5800, .T.);
#5820 = ORIENTED_EDGE ('', *, *, #5810, .F.);
#5830 = EDGE_LOOP ('', (#5710, #5760, #5770, #5820));
#5840 = FACE_OUTER_BOUND ('', #5830, .F.);
#5850 = CARTESIAN_POINT ('', (-2.79529056909712, -1.251, 0.5012905690971));
#5860 = CARTESIAN_POINT ('', (-2.79529056909712, 1.251, 0.5012905690971));
#5870 = CARTESIAN_POINT ('', (-21.1347094309029, -1.251, 0.5012905690971));
#5880 = CARTESIAN_POINT ('', (-21.1347094309029, 1.251, 0.5012905690971));
#5890 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5850, #5860), (#5870, #5880)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (2.63694062202981, 20.9763594838356), (4.849, 7.351), .UNSPECIFIED.);
#5900 = ADVANCED_FACE ('', (#5840), #5890, .F.);
#5910 = ORIENTED_EDGE ('', *, *, #580, .T.);
#5920 = ORIENTED_EDGE ('', *, *, #5810, .T.);
#5930 = ORIENTED_EDGE ('', *, *, #1440, .T.);
#5940 = ORIENTED_EDGE ('', *, *, #4530, .T.);
#5950 = EDGE_LOOP ('', (#5910, #5920, #5930, #5940));
#5960 = FACE_OUTER_BOUND ('', #5950, .F.);
#5970 = CARTESIAN_POINT ('', (-2.314, -1.251, 0.0189999999999796));
#5980 = CARTESIAN_POINT ('', (-2.314, 1.251, 0.0189999999999798));
#5990 = CARTESIAN_POINT ('', (-2.79729056909713, -1.251, 0.502290569097096));
#6000 = CARTESIAN_POINT ('', (-2.79729056909713, 1.251, 0.502290569097096));
#6010 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5970, #5980), (#5990, #6000)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.682061863821785, 0.0014142135623727), (-5.59162766698623, -3.08962766698623), .UNSPECIFIED.);
#6020 = ADVANCED_FACE ('', (#5960), #6010, .F.);
#6030 = ORIENTED_EDGE ('', *, *, #440, .F.);
#6040 = ORIENTED_EDGE ('', *, *, #2730, .F.);
#6050 = ORIENTED_EDGE ('', *, *, #1580, .F.);
#6060 = ORIENTED_EDGE ('', *, *, #5750, .F.);
#6070 = EDGE_LOOP ('', (#6030, #6040, #6050, #6060));
#6080 = FACE_OUTER_BOUND ('', #6070, .F.);
#6090 = CARTESIAN_POINT ('', (-21.616, 1.251, 0.0189999999999793));
#6100 = CARTESIAN_POINT ('', (-21.616, -1.251, 0.0189999999999792));
#6110 = CARTESIAN_POINT ('', (-21.1327094309029, 1.251, 0.502290569097097));
#6120 = CARTESIAN_POINT ('', (-21.1327094309029, -1.251, 0.502290569097097));
#6130 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#6090, #6100), (#6110, #6120)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.682061863821786, 0.00141421356237359), (3.08962766698623, 5.59162766698623), .UNSPECIFIED.);
#6140 = ADVANCED_FACE ('', (#6080), #6130, .F.);
#6150 = ORIENTED_EDGE ('', *, *, #4320, .T.);
#6160 = CARTESIAN_POINT ('', (-0.252163685879101, 1.18198212417821, 0.0200000000000001));
#6170 = CARTESIAN_POINT ('', (-1.1766891194594, 1.10493833804652, -4.77870943090291));
#6180 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6160, #6170), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6190 = EDGE_CURVE ('', #4200, #2020, #6180, .T.);
#6200 = ORIENTED_EDGE ('', *, *, #6190, .T.);
#6210 = ORIENTED_EDGE ('', *, *, #2060, .T.);
#6220 = ORIENTED_EDGE ('', *, *, #910, .T.);
#6230 = ORIENTED_EDGE ('', *, *, #5270, .T.);
#6240 = ORIENTED_EDGE ('', *, *, #5080, .T.);
#6250 = CARTESIAN_POINT ('', (-0.344195962388001, -1.11159568984187, -1.71684749970331));
#6260 = CARTESIAN_POINT ('', (-0.00354753199609981, -1.1399830590412, 0.0199999999999998));
#6270 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6250, #6260), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6280 = EDGE_CURVE ('', #4940, #4280, #6270, .T.);
#6290 = ORIENTED_EDGE ('', *, *, #6280, .T.);
#6300 = EDGE_LOOP ('', (#6150, #6200, #6210, #6220, #6230, #6240, #6290));
#6310 = FACE_OUTER_BOUND ('', #6300, .F.);
#6320 = CARTESIAN_POINT ('', (-0.252736731801432, 1.27743709447481, 0.0696318540010746));
#6330 = CARTESIAN_POINT ('', (0.0178381983834315, -1.34509469902443, 0.017037415426826));
#6340 = CARTESIAN_POINT ('', (-1.19471007511516, 1.27743709447481, -4.77640089228072));
#6350 = CARTESIAN_POINT ('', (-0.924135144930296, -1.34509469902443, -4.82899533085497));
#6360 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#6320, #6330), (#6340, #6350)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-9.99381722032441, -5.05708275738748), (1.20726400553874, 3.84424143732078), .UNSPECIFIED.);
#6370 = ADVANCED_FACE ('', (#6310), #6360, .F.);
#6380 = ORIENTED_EDGE ('', *, *, #3490, .T.);
#6390 = CARTESIAN_POINT ('', (-23.585804037612, 1.11159568984186, -1.71684749970331));
#6400 = CARTESIAN_POINT ('', (-23.9264524680039, 1.13998305904121, 0.02));
#6410 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6390, #6400), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6420 = EDGE_CURVE ('', #3370, #2380, #6410, .T.);
#6430 = ORIENTED_EDGE ('', *, *, #6420, .T.);
#6440 = ORIENTED_EDGE ('', *, *, #2440, .T.);
#6450 = CARTESIAN_POINT ('', (-23.6778363141209, -1.18198212417821, 0.0199999999999999));
#6460 = CARTESIAN_POINT ('', (-22.7533108805406, -1.10493833804652, -4.77870943090291));
#6470 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6450, #6460), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6480 = EDGE_CURVE ('', #2400, #2160, #6470, .T.);
#6490 = ORIENTED_EDGE ('', *, *, #6480, .T.);
#6500 = ORIENTED_EDGE ('', *, *, #2200, .T.);
#6510 = ORIENTED_EDGE ('', *, *, #1910, .T.);
#6520 = ORIENTED_EDGE ('', *, *, #3680, .T.);
#6530 = EDGE_LOOP ('', (#6380, #6430, #6440, #6490, #6500, #6510, #6520));
#6540 = FACE_OUTER_BOUND ('', #6530, .F.);
#6550 = CARTESIAN_POINT ('', (-23.0058648550697, 1.34509469902443, -4.82899533085497));
#6560 = CARTESIAN_POINT ('', (-22.7352899248848, -1.27743709447481, -4.77640089228072));
#6570 = CARTESIAN_POINT ('', (-23.9478381983834, 1.34509469902443, 0.0170374154268275));
#6580 = CARTESIAN_POINT ('', (-23.6772632681985, -1.27743709447481, 0.0696318540010777));
#6590 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#6550, #6560), (#6570, #6580)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (5.05708275738747, 9.9938172203244), (-3.94424143732078, -1.30726400553874), .UNSPECIFIED.);
#6600 = ADVANCED_FACE ('', (#6540), #6590, .F.);
#6610 = ORIENTED_EDGE ('', *, *, #4250, .F.);
#6620 = ORIENTED_EDGE ('', *, *, #5590, .F.);
#6630 = ORIENTED_EDGE ('', *, *, #4710, .F.);
#6640 = ORIENTED_EDGE ('', *, *, #1160, .F.);
#6650 = ORIENTED_EDGE ('', *, *, #2120, .F.);
#6660 = ORIENTED_EDGE ('', *, *, #6190, .F.);
#6670 = EDGE_LOOP ('', (#6610, #6620, #6630, #6640, #6650, #6660));
#6680 = FACE_OUTER_BOUND ('', #6670, .F.);
#6690 = CARTESIAN_POINT ('', (-1.27002792787124, 1.06565925810821, -5.27186968978042));
#6700 = CARTESIAN_POINT ('', (-0.156574602344108, 1.15844703523548, 0.507461824535774));
#6710 = CARTESIAN_POINT ('', (-1.2691332915205, 0.765696532306927, -5.26722611834628));
#6720 = CARTESIAN_POINT ('', (-0.155679965993368, 0.858484309434192, 0.512105395969908));
#6730 = CARTESIAN_POINT ('', (-1.56371589271308, 0.765696532306922, -5.21047146149232));
#6740 = CARTESIAN_POINT ('', (-0.450262567185953, 0.858484309434188, 0.568860052823872));
#6750 = CARTESIAN_POINT ('', (-1.85829849390566, 0.765696532306918, -5.15371680463835));
#6760 = CARTESIAN_POINT ('', (-0.744845168378537, 0.858484309434184, 0.625614709677836));
#6770 = CARTESIAN_POINT ('', (-1.8591931302564, 1.0656592581082, -5.15836037607249));
#6780 = CARTESIAN_POINT ('', (-0.745739804729277, 1.15844703523547, 0.620971138243702));
#6790 = CARTESIAN_POINT ('', (-1.86008776660714, 1.36562198390949, -5.16300394750662));
#6800 = CARTESIAN_POINT ('', (-0.746634441080017, 1.45840976103675, 0.616327566809568));
#6810 = CARTESIAN_POINT ('', (-1.56550516541456, 1.36562198390949, -5.21975860436059));
#6820 = CARTESIAN_POINT ('', (-0.452051839887432, 1.45840976103676, 0.559572909955604));
#6830 = CARTESIAN_POINT ('', (-1.27092256422198, 1.36562198390949, -5.27651326121455));
#6840 = CARTESIAN_POINT ('', (-0.157469238694848, 1.45840976103676, 0.50281825310164));
#6850 = CARTESIAN_POINT ('', (-1.27002792787124, 1.06565925810821, -5.27186968978042));
#6860 = CARTESIAN_POINT ('', (-0.156574602344108, 1.15844703523548, 0.507461824535774));
#6870 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#6690, #6700), (#6710, #6720), (#6730, #6740), (#6750, #6760), (#6770, #6780), (#6790, #6800), (#6810, #6820), (#6830, #6840), (#6850, #6860)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#6880 = ADVANCED_FACE ('', (#6680), #6870, .F.);
#6890 = ORIENTED_EDGE ('', *, *, #4420, .F.);
#6900 = ORIENTED_EDGE ('', *, *, #6280, .F.);
#6910 = ORIENTED_EDGE ('', *, *, #5010, .F.);
#6920 = ORIENTED_EDGE ('', *, *, #5430, .F.);
#6930 = EDGE_LOOP ('', (#6890, #6900, #6910, #6920));
#6940 = FACE_OUTER_BOUND ('', #6930, .F.);
#6950 = CARTESIAN_POINT ('', (-0.545461624342168, -1.17512093692148, 0.365902527096822));
#6960 = CARTESIAN_POINT ('', (-1.06762520379226, -1.13160730530064, -2.2964273898808));
#6970 = CARTESIAN_POINT ('', (-0.546387560035029, -1.47508235874839, 0.361181504043306));
#6980 = CARTESIAN_POINT ('', (-1.06855113948512, -1.43156872712755, -2.30114841293431));
#6990 = CARTESIAN_POINT ('', (-0.251996318997363, -1.47508235874839, 0.303442460058296));
#7000 = CARTESIAN_POINT ('', (-0.774159898447453, -1.43156872712755, -2.35888745691933));
#7010 = CARTESIAN_POINT ('', (0.0423949220403018, -1.4750823587484, 0.245703416073286));
#7020 = CARTESIAN_POINT ('', (-0.479768657409788, -1.43156872712755, -2.41662650090434));
#7030 = CARTESIAN_POINT ('', (0.0433208577331624, -1.17512093692149, 0.250424439126802));
#7040 = CARTESIAN_POINT ('', (-0.478842721716927, -1.13160730530065, -2.41190547785082));
#7050 = CARTESIAN_POINT ('', (0.0442467934260231, -0.875159515094579, 0.255145462180317));
#7060 = CARTESIAN_POINT ('', (-0.477916786024067, -0.831645883473737, -2.40718445479731));
#7070 = CARTESIAN_POINT ('', (-0.250144447611642, -0.875159515094575, 0.312884506165327));
#7080 = CARTESIAN_POINT ('', (-0.772308027061732, -0.831645883473733, -2.34944541081229));
#7090 = CARTESIAN_POINT ('', (-0.544535688649307, -0.875159515094571, 0.370623550150337));
#7100 = CARTESIAN_POINT ('', (-1.0666992680994, -0.831645883473729, -2.29170636682728));
#7110 = CARTESIAN_POINT ('', (-0.545461624342168, -1.17512093692148, 0.365902527096822));
#7120 = CARTESIAN_POINT ('', (-1.06762520379226, -1.13160730530064, -2.2964273898808));
#7130 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#6950, #6960), (#6970, #6980), (#6990, #7000), (#7010, #7020), (#7030, #7040), (#7050, #7060), (#7070, #7080), (#7090, #7100), (#7110, #7120)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#7140 = ADVANCED_FACE ('', (#6940), #7130, .F.);
#7150 = CARTESIAN_POINT ('', (-23.5878879252666, 1.1430015258826, -1.71476361204875));
#7160 = CARTESIAN_POINT ('', (-23.9281276421366, 1.17135483562177, 0.0199999999999978));
#7170 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7150, #7160), .UNSPECIFIED., .F., .U., (2, 2), (0.261854047973702, 0.913450080826805), .UNSPECIFIED.);
#7180 = EDGE_CURVE ('', #3270, #2470, #7170, .T.);
#7190 = ORIENTED_EDGE ('', *, *, #7180, .T.);
#7200 = ORIENTED_EDGE ('', *, *, #2520, .F.);
#7210 = ORIENTED_EDGE ('', *, *, #6420, .F.);
#7220 = ORIENTED_EDGE ('', *, *, #3420, .F.);
#7230 = EDGE_LOOP ('', (#7190, #7200, #7210, #7220));
#7240 = FACE_OUTER_BOUND ('', #7230, .F.);
#7250 = CARTESIAN_POINT ('', (-23.9733208577332, 1.17512093692149, 0.250424439126789));
#7260 = CARTESIAN_POINT ('', (-23.4511572782831, 1.13160730530064, -2.41190547785082));
#7270 = CARTESIAN_POINT ('', (-23.974246793426, 0.875159515094588, 0.255145462180313));
#7280 = CARTESIAN_POINT ('', (-23.4520832139759, 0.831645883473737, -2.40718445479729));
#7290 = CARTESIAN_POINT ('', (-23.6798555523884, 0.875159515094625, 0.312884506165325));
#7300 = CARTESIAN_POINT ('', (-23.1576919729382, 0.831645883473773, -2.34944541081228));
#7310 = CARTESIAN_POINT ('', (-23.3854643113507, 0.875159515094662, 0.370623550150337));
#7320 = CARTESIAN_POINT ('', (-22.8633007319006, 0.83164588347381, -2.29170636682727));
#7330 = CARTESIAN_POINT ('', (-23.3845383756579, 1.17512093692156, 0.365902527096813));
#7340 = CARTESIAN_POINT ('', (-22.8623747962078, 1.13160730530071, -2.29642738988079));
#7350 = CARTESIAN_POINT ('', (-23.3836124399651, 1.47508235874847, 0.361181504043289));
#7360 = CARTESIAN_POINT ('', (-22.8614488605149, 1.43156872712761, -2.30114841293432));
#7370 = CARTESIAN_POINT ('', (-23.6780036810027, 1.47508235874843, 0.303442460058277));
#7380 = CARTESIAN_POINT ('', (-23.1558401015526, 1.43156872712758, -2.35888745691933));
#7390 = CARTESIAN_POINT ('', (-23.9723949220404, 1.47508235874839, 0.245703416073265));
#7400 = CARTESIAN_POINT ('', (-23.4502313425903, 1.43156872712754, -2.41662650090434));
#7410 = CARTESIAN_POINT ('', (-23.9733208577332, 1.17512093692149, 0.250424439126789));
#7420 = CARTESIAN_POINT ('', (-23.4511572782831, 1.13160730530064, -2.41190547785082));
#7430 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#7250, #7260), (#7270, #7280), (#7290, #7300), (#7310, #7320), (#7330, #7340), (#7350, #7360), (#7370, #7380), (#7390, #7400), (#7410, #7420)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.750000000000001, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#7440 = ADVANCED_FACE ('', (#7240), #7430, .F.);
#7450 = ORIENTED_EDGE ('', *, *, #2260, .F.);
#7460 = ORIENTED_EDGE ('', *, *, #6480, .F.);
#7470 = ORIENTED_EDGE ('', *, *, #2870, .F.);
#7480 = ORIENTED_EDGE ('', *, *, #3840, .F.);
#7490 = ORIENTED_EDGE ('', *, *, #3040, .F.);
#7500 = ORIENTED_EDGE ('', *, *, #160, .F.);
#7510 = EDGE_LOOP ('', (#7450, #7460, #7470, #7480, #7490, #7500));
#7520 = FACE_OUTER_BOUND ('', #7510, .F.);
#7530 = CARTESIAN_POINT ('', (-22.070806869743, -1.06565925810815, -5.15836037607576));
#7540 = CARTESIAN_POINT ('', (-23.1842601952707, -1.15844703523538, 0.620971138244009));
#7550 = CARTESIAN_POINT ('', (-22.0699122333922, -1.36562198390945, -5.16300394750988));
#7560 = CARTESIAN_POINT ('', (-23.1833655589199, -1.45840976103668, 0.616327566809891));
#7570 = CARTESIAN_POINT ('', (-22.3644948345848, -1.36562198390951, -5.21975860436384));
#7580 = CARTESIAN_POINT ('', (-23.4779481601125, -1.45840976103674, 0.559572909955932));
#7590 = CARTESIAN_POINT ('', (-22.6590774357774, -1.36562198390957, -5.27651326121779));
#7600 = CARTESIAN_POINT ('', (-23.7725307613051, -1.4584097610368, 0.502818253101974));
#7610 = CARTESIAN_POINT ('', (-22.6599720721282, -1.06565925810828, -5.27186968978368));
#7620 = CARTESIAN_POINT ('', (-23.7734253976559, -1.15844703523551, 0.507461824536092));
#7630 = CARTESIAN_POINT ('', (-22.660866708479, -0.765696532306987, -5.26722611834956));
#7640 = CARTESIAN_POINT ('', (-23.7743200340067, -0.858484309434215, 0.51210539597021));
#7650 = CARTESIAN_POINT ('', (-22.3662841072864, -0.765696532306924, -5.2104714614956));
#7660 = CARTESIAN_POINT ('', (-23.4797374328141, -0.858484309434152, 0.568860052824169));
#7670 = CARTESIAN_POINT ('', (-22.0717015060938, -0.765696532306861, -5.15371680464164));
#7680 = CARTESIAN_POINT ('', (-23.1851548316215, -0.858484309434089, 0.625614709678127));
#7690 = CARTESIAN_POINT ('', (-22.070806869743, -1.06565925810815, -5.15836037607576));
#7700 = CARTESIAN_POINT ('', (-23.1842601952707, -1.15844703523538, 0.620971138244009));
#7710 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#7530, #7540), (#7550, #7560), (#7570, #7580), (#7590, #7600), (#7610, #7620), (#7630, #7640), (#7650, #7660), (#7670, #7680), (#7690, #7700)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.249999999999999, 0.500000000000001, 0.750000000000001, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#7720 = ADVANCED_FACE ('', (#7520), #7710, .F.);
#7730 = ORIENTED_EDGE ('', *, *, #7180, .F.);
#7740 = ORIENTED_EDGE ('', *, *, #3340, .F.);
#7750 = ORIENTED_EDGE ('', *, *, #4000, .F.);
#7760 = ORIENTED_EDGE ('', *, *, #2620, .F.);
#7770 = EDGE_LOOP ('', (#7730, #7740, #7750, #7760));
#7780 = FACE_OUTER_BOUND ('', #7770, .F.);
#7790 = CARTESIAN_POINT ('', (-23.9733208577332, 1.17512093692149, 0.250424439126789));
#7800 = CARTESIAN_POINT ('', (-23.4511572782831, 1.13160730530064, -2.41190547785082));
#7810 = CARTESIAN_POINT ('', (-23.974246793426, 0.875159515094588, 0.255145462180313));
#7820 = CARTESIAN_POINT ('', (-23.4520832139759, 0.831645883473737, -2.40718445479729));
#7830 = CARTESIAN_POINT ('', (-23.6798555523884, 0.875159515094625, 0.312884506165325));
#7840 = CARTESIAN_POINT ('', (-23.1576919729382, 0.831645883473773, -2.34944541081228));
#7850 = CARTESIAN_POINT ('', (-23.3854643113507, 0.875159515094662, 0.370623550150337));
#7860 = CARTESIAN_POINT ('', (-22.8633007319006, 0.83164588347381, -2.29170636682727));
#7870 = CARTESIAN_POINT ('', (-23.3845383756579, 1.17512093692156, 0.365902527096813));
#7880 = CARTESIAN_POINT ('', (-22.8623747962078, 1.13160730530071, -2.29642738988079));
#7890 = CARTESIAN_POINT ('', (-23.3836124399651, 1.47508235874847, 0.361181504043289));
#7900 = CARTESIAN_POINT ('', (-22.8614488605149, 1.43156872712761, -2.30114841293432));
#7910 = CARTESIAN_POINT ('', (-23.6780036810027, 1.47508235874843, 0.303442460058277));
#7920 = CARTESIAN_POINT ('', (-23.1558401015526, 1.43156872712758, -2.35888745691933));
#7930 = CARTESIAN_POINT ('', (-23.9723949220404, 1.47508235874839, 0.245703416073265));
#7940 = CARTESIAN_POINT ('', (-23.4502313425903, 1.43156872712754, -2.41662650090434));
#7950 = CARTESIAN_POINT ('', (-23.9733208577332, 1.17512093692149, 0.250424439126789));
#7960 = CARTESIAN_POINT ('', (-23.4511572782831, 1.13160730530064, -2.41190547785082));
#7970 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#7790, #7800), (#7810, #7820), (#7830, #7840), (#7850, #7860), (#7870, #7880), (#7890, #7900), (#7910, #7920), (#7930, #7940), (#7950, #7960)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.750000000000001, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#7980 = ADVANCED_FACE ('', (#7780), #7970, .F.);
#7990 = CLOSED_SHELL ('', (#1000, #2000, #2360, #2960, #3180, #3640, #3790, #3950, #4110, #4630, #4850, #5230, #5380, #5540, #5700, #5900, #6020, #6140, #6370, #6600, #6880, #7140, #7440, #7720, #7980));
#8000 = MANIFOLD_SOLID_BREP ('CUT', #7990);
#8010 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#8020 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#8030 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#8040 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #8010, 'DISTANCE_ACCURACY_VALUE', '');
#8050 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#8040))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#8010, #8020, #8030))
   REPRESENTATION_CONTEXT ('', '3D')
);
#8060 = COLOUR_RGB ('', 1., 0.74901960784314, 0.);
#8070 = FILL_AREA_STYLE_COLOUR ('', #8060);
#8080 = FILL_AREA_STYLE ('', (#8070));
#8090 = SURFACE_STYLE_FILL_AREA (#8080);
#8100 = SURFACE_SIDE_STYLE ('', (#8090));
#8110 = SURFACE_STYLE_USAGE (.POSITIVE., #8100);
#8120 = PRESENTATION_STYLE_ASSIGNMENT ((#8110));
#8130 = STYLED_ITEM ('', (#8120), #8000);
#8140 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#8000), #8050);
#8150 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#8160 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #8150);
#8170 = MECHANICAL_CONTEXT ('', #8150, 'mechanical');
#8180 = PRODUCT ('NONE', '', '', (#8170));
#8190 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#8200 = PERSON ('', '', $, $, $, $);
#8210 = ORGANIZATION ($, '', '');
#8220 = PERSON_AND_ORGANIZATION (#8200, #8210);
#8230 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#8220, #8190, (#8180));
#8240 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#8180));
#8250 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #8180, .NOT_KNOWN.);
#8260 = APPROVAL_STATUS ('approved');
#8270 = APPROVAL (#8260, '');
#8280 = CALENDAR_DATE (2017, 7, 3);
#8290 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#8300 = LOCAL_TIME (10, 42, 49., #8290);
#8310 = DATE_AND_TIME (#8280, #8300);
#8320 = APPROVAL_DATE_TIME (#8310, #8270);
#8330 = APPROVAL_ROLE ('');
#8340 = PERSON ('', '', $, $, $, $);
#8350 = ORGANIZATION ($, '', '');
#8360 = PERSON_AND_ORGANIZATION (#8340, #8350);
#8370 = APPROVAL_PERSON_ORGANIZATION (#8360, #8270, #8330);
#8380 = CC_DESIGN_APPROVAL (#8270, (#8250));
#8390 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#8400 = PERSON ('', '', $, $, $, $);
#8410 = ORGANIZATION ($, '', '');
#8420 = PERSON_AND_ORGANIZATION (#8400, #8410);
#8430 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#8420, #8390, (#8250));
#8440 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#8450 = PERSON ('', '', $, $, $, $);
#8460 = ORGANIZATION ($, '', '');
#8470 = PERSON_AND_ORGANIZATION (#8450, #8460);
#8480 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#8470, #8440, (#8250));
#8490 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#8500 = SECURITY_CLASSIFICATION ('', '', #8490);
#8510 = APPROVAL_STATUS ('approved');
#8520 = APPROVAL (#8510, '');
#8530 = CALENDAR_DATE (2017, 7, 3);
#8540 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#8550 = LOCAL_TIME (10, 42, 49., #8540);
#8560 = DATE_AND_TIME (#8530, #8550);
#8570 = APPROVAL_DATE_TIME (#8560, #8520);
#8580 = APPROVAL_ROLE ('');
#8590 = PERSON ('', '', $, $, $, $);
#8600 = ORGANIZATION ($, '', '');
#8610 = PERSON_AND_ORGANIZATION (#8590, #8600);
#8620 = APPROVAL_PERSON_ORGANIZATION (#8610, #8520, #8580);
#8630 = CC_DESIGN_APPROVAL (#8520, (#8500));
#8640 = DATE_TIME_ROLE ('classification_date');
#8650 = CALENDAR_DATE (2017, 7, 3);
#8660 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#8670 = LOCAL_TIME (10, 42, 49., #8660);
#8680 = DATE_AND_TIME (#8650, #8670);
#8690 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#8680, #8640, (#8500));
#8700 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#8710 = PERSON ('', '', $, $, $, $);
#8720 = ORGANIZATION ($, '', '');
#8730 = PERSON_AND_ORGANIZATION (#8710, #8720);
#8740 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#8730, #8700, (#8500));
#8750 = CC_DESIGN_SECURITY_CLASSIFICATION (#8500, (#8250));
#8760 = DESIGN_CONTEXT ('', #8150, 'design');
#8770 = PRODUCT_DEFINITION ('', '', #8250, #8760);
#8780 = APPROVAL_STATUS ('approved');
#8790 = APPROVAL (#8780, '');
#8800 = CALENDAR_DATE (2017, 7, 3);
#8810 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#8820 = LOCAL_TIME (10, 42, 49., #8810);
#8830 = DATE_AND_TIME (#8800, #8820);
#8840 = APPROVAL_DATE_TIME (#8830, #8790);
#8850 = APPROVAL_ROLE ('');
#8860 = PERSON ('', '', $, $, $, $);
#8870 = ORGANIZATION ($, '', '');
#8880 = PERSON_AND_ORGANIZATION (#8860, #8870);
#8890 = APPROVAL_PERSON_ORGANIZATION (#8880, #8790, #8850);
#8900 = CC_DESIGN_APPROVAL (#8790, (#8770));
#8910 = DATE_TIME_ROLE ('creation_date');
#8920 = CALENDAR_DATE (2017, 7, 3);
#8930 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#8940 = LOCAL_TIME (10, 42, 49., #8930);
#8950 = DATE_AND_TIME (#8920, #8940);
#8960 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#8950, #8910, (#8770));
#8970 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#8980 = PERSON ('', '', $, $, $, $);
#8990 = ORGANIZATION ($, '', '');
#9000 = PERSON_AND_ORGANIZATION (#8980, #8990);
#9010 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#9000, #8970, (#8770));
#9020 = PRODUCT_DEFINITION_SHAPE ('', '', #8770);
#9030 = SHAPE_DEFINITION_REPRESENTATION (#9020, #8140);
ENDSEC;
END-ISO-10303-21;