ISO-10303-21;
HEADER;
FILE_DESCRIPTION ((), '1');
FILE_NAME ('q:\\engin oezkan\\lieferung_sa\\cad\\comp\\step\\r_nacharbeit\\SA17-3003N-ALU AN1015.stp', '2017-04-24T13:31:32', ('Unknown'), ('TDM'), 'HarmonyWare STEP v2.0.2.9', 'T3D tool generator', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;

DATA;
#10 = CARTESIAN_POINT ('', (-16.75, 1.25, 0.50689927651842));
#20 = VERTEX_POINT ('', #10);
#30 = CARTESIAN_POINT ('', (-16.75, 1.25, -6.87310072348157));
#40 = VERTEX_POINT ('', #30);
#50 = CARTESIAN_POINT ('', (-16.75, 1.25, 0.50689927651842));
#60 = CARTESIAN_POINT ('', (-16.75, 1.25, -6.87310072348157));
#70 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#50, #60), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#80 = EDGE_CURVE ('', #20, #40, #70, .T.);
#90 = ORIENTED_EDGE ('', *, *, #80, .F.);
#100 = CARTESIAN_POINT ('', (-2.86189927651844, 1.25, 0.50689927651842));
#110 = VERTEX_POINT ('', #100);
#120 = CARTESIAN_POINT ('', (-16.75, 1.25, 0.50689927651842));
#130 = CARTESIAN_POINT ('', (-2.86189927651844, 1.25, 0.50689927651842));
#140 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#120, #130), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#150 = EDGE_CURVE ('', #20, #110, #140, .T.);
#160 = ORIENTED_EDGE ('', *, *, #150, .T.);
#170 = CARTESIAN_POINT ('', (-2.355, 1.25, -2.00605548681995E-14));
#180 = VERTEX_POINT ('', #170);
#190 = CARTESIAN_POINT ('', (-2.355, 1.25, -2.00605548681995E-14));
#200 = CARTESIAN_POINT ('', (-2.86189927651844, 1.25, 0.50689927651842));
#210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#190, #200), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#220 = EDGE_CURVE ('', #180, #110, #210, .T.);
#230 = ORIENTED_EDGE ('', *, *, #220, .F.);
#240 = CARTESIAN_POINT ('', (-3.005, 1.25, -2.00605548681995E-14));
#250 = VERTEX_POINT ('', #240);
#260 = CARTESIAN_POINT ('', (-3.005, 1.25, -2.00605548681995E-14));
#270 = CARTESIAN_POINT ('', (-2.355, 1.25, -2.00605548681995E-14));
#280 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#260, #270), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#290 = EDGE_CURVE ('', #250, #180, #280, .T.);
#300 = ORIENTED_EDGE ('', *, *, #290, .F.);
#310 = CARTESIAN_POINT ('', (-3.005, 1.25, -4.42765153731522));
#320 = VERTEX_POINT ('', #310);
#330 = CARTESIAN_POINT ('', (-3.005, 1.25, -4.42765153731522));
#340 = CARTESIAN_POINT ('', (-3.005, 1.25, -2.04281036531029E-14));
#350 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#330, #340), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#360 = EDGE_CURVE ('', #320, #250, #350, .T.);
#370 = ORIENTED_EDGE ('', *, *, #360, .F.);
#380 = CARTESIAN_POINT ('', (-0.655000000000001, 1.25, -2.07765153731526));
#390 = VERTEX_POINT ('', #380);
#400 = CARTESIAN_POINT ('', (-0.655000000000001, 1.25, -2.07765153731526));
#410 = CARTESIAN_POINT ('', (-3.005, 1.25, -4.42765153731522));
#420 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#400, #410), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#430 = EDGE_CURVE ('', #390, #320, #420, .T.);
#440 = ORIENTED_EDGE ('', *, *, #430, .F.);
#450 = CARTESIAN_POINT ('', (-0.655000000000001, 1.25, -6.87310072348157));
#460 = VERTEX_POINT ('', #450);
#470 = CARTESIAN_POINT ('', (-0.655000000000001, 1.25, -6.87310072348157));
#480 = CARTESIAN_POINT ('', (-0.655000000000001, 1.25, -2.07765153731526));
#490 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#470, #480), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#500 = EDGE_CURVE ('', #460, #390, #490, .T.);
#510 = ORIENTED_EDGE ('', *, *, #500, .F.);
#520 = CARTESIAN_POINT ('', (-0.655000000000001, 1.25, -6.87310072348157));
#530 = CARTESIAN_POINT ('', (-16.75, 1.25, -6.87310072348157));
#540 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#520, #530), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#550 = EDGE_CURVE ('', #460, #40, #540, .T.);
#560 = ORIENTED_EDGE ('', *, *, #550, .T.);
#570 = EDGE_LOOP ('', (#90, #160, #230, #300, #370, #440, #510, #560));
#580 = FACE_OUTER_BOUND ('', #570, .T.);
#590 = CARTESIAN_POINT ('', (-16.751, 1.25, 0.50789927651842));
#600 = CARTESIAN_POINT ('', (-16.751, 1.25, -6.87410072348157));
#610 = CARTESIAN_POINT ('', (-0.654, 1.25, 0.50789927651842));
#620 = CARTESIAN_POINT ('', (-0.654, 1.25, -6.87410072348157));
#630 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#590, #600), (#610, #620)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.00499999999999901, 16.102), (0., 7.38199999999999), .UNSPECIFIED.);
#640 = ADVANCED_FACE ('', (#580), #630, .T.);
#650 = CARTESIAN_POINT ('', (-16.75, -1.25, -6.87310072348157));
#660 = VERTEX_POINT ('', #650);
#670 = CARTESIAN_POINT ('', (-16.75, -1.25, 0.50689927651842));
#680 = VERTEX_POINT ('', #670);
#690 = CARTESIAN_POINT ('', (-16.75, -1.25, -6.87310072348157));
#700 = CARTESIAN_POINT ('', (-16.75, -1.25, 0.50689927651842));
#710 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#690, #700), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#720 = EDGE_CURVE ('', #660, #680, #710, .T.);
#730 = ORIENTED_EDGE ('', *, *, #720, .F.);
#740 = CARTESIAN_POINT ('', (-0.655000000000001, -1.25, -6.87310072348157));
#750 = VERTEX_POINT ('', #740);
#760 = CARTESIAN_POINT ('', (-0.655000000000001, -1.25, -6.87310072348157));
#770 = CARTESIAN_POINT ('', (-16.75, -1.25, -6.87310072348157));
#780 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#760, #770), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#790 = EDGE_CURVE ('', #750, #660, #780, .T.);
#800 = ORIENTED_EDGE ('', *, *, #790, .F.);
#810 = CARTESIAN_POINT ('', (-0.655000000000001, -1.25, -2.07765153731526));
#820 = VERTEX_POINT ('', #810);
#830 = CARTESIAN_POINT ('', (-0.655000000000001, -1.25, -6.87310072348157));
#840 = CARTESIAN_POINT ('', (-0.655000000000001, -1.25, -2.07765153731526));
#850 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#830, #840), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#860 = EDGE_CURVE ('', #750, #820, #850, .T.);
#870 = ORIENTED_EDGE ('', *, *, #860, .T.);
#880 = CARTESIAN_POINT ('', (-3.005, -1.25, -4.42765153731522));
#890 = VERTEX_POINT ('', #880);
#900 = CARTESIAN_POINT ('', (-0.655000000000001, -1.25, -2.07765153731526));
#910 = CARTESIAN_POINT ('', (-3.005, -1.25, -4.42765153731522));
#920 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#900, #910), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#930 = EDGE_CURVE ('', #820, #890, #920, .T.);
#940 = ORIENTED_EDGE ('', *, *, #930, .T.);
#950 = CARTESIAN_POINT ('', (-3.005, -1.25, -1.99074740183061E-14));
#960 = VERTEX_POINT ('', #950);
#970 = CARTESIAN_POINT ('', (-3.005, -1.25, -4.42765153731522));
#980 = CARTESIAN_POINT ('', (-3.005, -1.25, -1.95399252334028E-14));
#990 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#970, #980), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1000 = EDGE_CURVE ('', #890, #960, #990, .T.);
#1010 = ORIENTED_EDGE ('', *, *, #1000, .T.);
#1020 = CARTESIAN_POINT ('', (-2.355, -1.25, -1.99074740183061E-14));
#1030 = VERTEX_POINT ('', #1020);
#1040 = CARTESIAN_POINT ('', (-3.005, -1.25, -1.99074740183061E-14));
#1050 = CARTESIAN_POINT ('', (-2.355, -1.25, -1.99074740183061E-14));
#1060 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1040, #1050), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1070 = EDGE_CURVE ('', #960, #1030, #1060, .T.);
#1080 = ORIENTED_EDGE ('', *, *, #1070, .T.);
#1090 = CARTESIAN_POINT ('', (-2.86189927651844, -1.25, 0.50689927651842));
#1100 = VERTEX_POINT ('', #1090);
#1110 = CARTESIAN_POINT ('', (-2.86189927651844, -1.25, 0.50689927651842));
#1120 = CARTESIAN_POINT ('', (-2.355, -1.25, -1.99840144432528E-14));
#1130 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1110, #1120), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1140 = EDGE_CURVE ('', #1100, #1030, #1130, .T.);
#1150 = ORIENTED_EDGE ('', *, *, #1140, .F.);
#1160 = CARTESIAN_POINT ('', (-16.75, -1.25, 0.50689927651842));
#1170 = CARTESIAN_POINT ('', (-2.86189927651844, -1.25, 0.50689927651842));
#1180 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1160, #1170), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1190 = EDGE_CURVE ('', #680, #1100, #1180, .T.);
#1200 = ORIENTED_EDGE ('', *, *, #1190, .F.);
#1210 = EDGE_LOOP ('', (#730, #800, #870, #940, #1010, #1080, #1150, #1200));
#1220 = FACE_OUTER_BOUND ('', #1210, .T.);
#1230 = CARTESIAN_POINT ('', (-0.654000000000001, -1.25, 0.50789927651842));
#1240 = CARTESIAN_POINT ('', (-0.654000000000001, -1.25, -6.87410072348157));
#1250 = CARTESIAN_POINT ('', (-16.751, -1.25, 0.50789927651842));
#1260 = CARTESIAN_POINT ('', (-16.751, -1.25, -6.87410072348157));
#1270 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1230, #1240), (#1250, #1260)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-9.99200722162641E-16, 16.097), (-3.33066907387547E-16, 7.38199999999999), .UNSPECIFIED.);
#1280 = ADVANCED_FACE ('', (#1220), #1270, .T.);
#1290 = ORIENTED_EDGE ('', *, *, #150, .F.);
#1300 = CARTESIAN_POINT ('', (-16.75, 1.25, 0.50689927651842));
#1310 = CARTESIAN_POINT ('', (-16.75, -1.25, 0.50689927651842));
#1320 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1300, #1310), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1330 = EDGE_CURVE ('', #20, #680, #1320, .T.);
#1340 = ORIENTED_EDGE ('', *, *, #1330, .T.);
#1350 = ORIENTED_EDGE ('', *, *, #1190, .T.);
#1360 = CARTESIAN_POINT ('', (-2.86189927651844, 1.25, 0.50689927651842));
#1370 = CARTESIAN_POINT ('', (-2.86189927651844, -1.25, 0.50689927651842));
#1380 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1360, #1370), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1390 = EDGE_CURVE ('', #110, #1100, #1380, .T.);
#1400 = ORIENTED_EDGE ('', *, *, #1390, .F.);
#1410 = EDGE_LOOP ('', (#1290, #1340, #1350, #1400));
#1420 = FACE_OUTER_BOUND ('', #1410, .T.);
#1430 = CARTESIAN_POINT ('', (-2.86089927651844, 1.251, 0.50689927651842));
#1440 = CARTESIAN_POINT ('', (-2.86089927651844, -1.251, 0.50689927651842));
#1450 = CARTESIAN_POINT ('', (-16.751, 1.251, 0.50689927651842));
#1460 = CARTESIAN_POINT ('', (-16.751, -1.251, 0.50689927651842));
#1470 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1430, #1440), (#1450, #1460)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-4.44089209850063E-16, 13.8901007234816), (0., 2.502), .UNSPECIFIED.);
#1480 = ADVANCED_FACE ('', (#1420), #1470, .T.);
#1490 = CARTESIAN_POINT ('', (-16.75, 1.25, -6.87310072348157));
#1500 = CARTESIAN_POINT ('', (-16.75, -1.25, -6.87310072348157));
#1510 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1490, #1500), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1520 = EDGE_CURVE ('', #40, #660, #1510, .T.);
#1530 = ORIENTED_EDGE ('', *, *, #1520, .F.);
#1540 = ORIENTED_EDGE ('', *, *, #550, .F.);
#1550 = CARTESIAN_POINT ('', (-0.655000000000001, -1.25, -6.87310072348157));
#1560 = CARTESIAN_POINT ('', (-0.655000000000001, 1.25, -6.87310072348157));
#1570 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1550, #1560), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1580 = EDGE_CURVE ('', #750, #460, #1570, .T.);
#1590 = ORIENTED_EDGE ('', *, *, #1580, .F.);
#1600 = ORIENTED_EDGE ('', *, *, #790, .T.);
#1610 = EDGE_LOOP ('', (#1530, #1540, #1590, #1600));
#1620 = FACE_OUTER_BOUND ('', #1610, .T.);
#1630 = CARTESIAN_POINT ('', (-16.751, 1.251, -6.87310072348157));
#1640 = CARTESIAN_POINT ('', (-16.751, -1.251, -6.87310072348157));
#1650 = CARTESIAN_POINT ('', (-0.654, 1.251, -6.87310072348157));
#1660 = CARTESIAN_POINT ('', (-0.654, -1.251, -6.87310072348157));
#1670 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1630, #1640), (#1650, #1660)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.00499999999999901, 16.102), (0., 2.502), .UNSPECIFIED.);
#1680 = ADVANCED_FACE ('', (#1620), #1670, .T.);
#1690 = ORIENTED_EDGE ('', *, *, #220, .T.);
#1700 = ORIENTED_EDGE ('', *, *, #1390, .T.);
#1710 = ORIENTED_EDGE ('', *, *, #1140, .T.);
#1720 = CARTESIAN_POINT ('', (-2.355, -1.25, -1.99074740183061E-14));
#1730 = CARTESIAN_POINT ('', (-2.355, 1.25, -2.00605548681995E-14));
#1740 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1720, #1730), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1750 = EDGE_CURVE ('', #1030, #180, #1740, .T.);
#1760 = ORIENTED_EDGE ('', *, *, #1750, .T.);
#1770 = EDGE_LOOP ('', (#1690, #1700, #1710, #1760));
#1780 = FACE_OUTER_BOUND ('', #1770, .T.);
#1790 = CARTESIAN_POINT ('', (-2.354, 1.251, -0.00100000000001982));
#1800 = CARTESIAN_POINT ('', (-2.354, -1.251, -0.00100000000001974));
#1810 = CARTESIAN_POINT ('', (-2.86289927651844, 1.251, 0.507899276518421));
#1820 = CARTESIAN_POINT ('', (-2.86289927651844, -1.251, 0.507899276518421));
#1830 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1790, #1800), (#1810, #1820)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-4.44089209850063E-16, 0.719692258734233), (0., 2.502), .UNSPECIFIED.);
#1840 = ADVANCED_FACE ('', (#1780), #1830, .T.);
#1850 = CARTESIAN_POINT ('', (-0.33552865244269, -1.47245594562978, 9.016192303505E-17));
#1860 = VERTEX_POINT ('', #1850);
#1870 = CARTESIAN_POINT ('', (-0.33552865244269, -1.47245594562978, 9.016192303505E-17));
#1880 = CARTESIAN_POINT ('', (-3.005, -1.25, -1.99074740183061E-14));
#1890 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1870, #1880), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1900 = EDGE_CURVE ('', #1860, #960, #1890, .T.);
#1910 = ORIENTED_EDGE ('', *, *, #1900, .F.);
#1920 = CARTESIAN_POINT ('', (-0.00500000000000078, -1.174419455944, 7.19124513789098E-17));
#1930 = VERTEX_POINT ('', #1920);
#1940 = CARTESIAN_POINT ('', (-0.33552865244269, -1.47245594562977, 9.01619230350494E-17));
#1950 = CARTESIAN_POINT ('', (-0.202016183541261, -1.4835819847049, 9.08431964420767E-17));
#1960 = CARTESIAN_POINT ('', (-0.10350809177063, -1.39475759486761, 8.5404271207054E-17));
#1970 = CARTESIAN_POINT ('', (-0.00499999999999012, -1.30593320503032, 7.99653459720313E-17));
#1980 = CARTESIAN_POINT ('', (-0.00499999999999012, -1.174419455944, 7.19124513789098E-17));
#1990 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1940, #1950, #1960, #1970, #1980), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 0.499999999999995, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.915880067956853, 1., 0.915880067956853, 1.))
   REPRESENTATION_ITEM ('')
);
#2000 = EDGE_CURVE ('', #1860, #1930, #1990, .T.);
#2010 = ORIENTED_EDGE ('', *, *, #2000, .T.);
#2020 = CARTESIAN_POINT ('', (-0.00500000000000078, 1.174419455944, -7.19124513789098E-17));
#2030 = VERTEX_POINT ('', #2020);
#2040 = CARTESIAN_POINT ('', (-0.00500000000000078, -1.174419455944, 7.19124513789098E-17));
#2050 = CARTESIAN_POINT ('', (-0.00500000000000078, 1.174419455944, -7.19124513789098E-17));
#2060 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2040, #2050), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2070 = EDGE_CURVE ('', #1930, #2030, #2060, .T.);
#2080 = ORIENTED_EDGE ('', *, *, #2070, .T.);
#2090 = CARTESIAN_POINT ('', (-0.33552865244269, 1.47245594562978, -9.016192303505E-17));
#2100 = VERTEX_POINT ('', #2090);
#2110 = CARTESIAN_POINT ('', (-0.00500000000000078, 1.174419455944, -7.19124513789098E-17));
#2120 = CARTESIAN_POINT ('', (-0.00500000000000078, 1.30593320503032, -7.99653459720313E-17));
#2130 = CARTESIAN_POINT ('', (-0.10350809177063, 1.39475759486761, -8.5404271207054E-17));
#2140 = CARTESIAN_POINT ('', (-0.202016183541261, 1.4835819847049, -9.08431964420767E-17));
#2150 = CARTESIAN_POINT ('', (-0.33552865244269, 1.47245594562977, -9.01619230350493E-17));
#2160 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2110, #2120, #2130, #2140, #2150), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 0.500000000000005, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.915880067956853, 1., 0.915880067956853, 1.))
   REPRESENTATION_ITEM ('')
);
#2170 = EDGE_CURVE ('', #2030, #2100, #2160, .T.);
#2180 = ORIENTED_EDGE ('', *, *, #2170, .T.);
#2190 = CARTESIAN_POINT ('', (-0.33552865244269, 1.47245594562978, -9.016192303505E-17));
#2200 = CARTESIAN_POINT ('', (-3.005, 1.25, -2.00605548681995E-14));
#2210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2190, #2200), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2220 = EDGE_CURVE ('', #2100, #250, #2210, .T.);
#2230 = ORIENTED_EDGE ('', *, *, #2220, .T.);
#2240 = ORIENTED_EDGE ('', *, *, #290, .T.);
#2250 = ORIENTED_EDGE ('', *, *, #1750, .F.);
#2260 = ORIENTED_EDGE ('', *, *, #1070, .F.);
#2270 = EDGE_LOOP ('', (#1910, #2010, #2080, #2180, #2230, #2240, #2250, #2260));
#2280 = FACE_OUTER_BOUND ('', #2270, .T.);
#2290 = CARTESIAN_POINT ('', (-0.00400000000000077, 1.4835819847049, -9.08431964420729E-17));
#2300 = CARTESIAN_POINT ('', (-0.00400000000000077, -1.4835819847049, 9.08431964420803E-17));
#2310 = CARTESIAN_POINT ('', (-3.006, 1.4835819847049, -2.0074857639695E-14));
#2320 = CARTESIAN_POINT ('', (-3.006, -1.4835819847049, -1.98931712468108E-14));
#2330 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2290, #2300), (#2310, #2320)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-5.67254576644416E-16, 3.002), (0.00099999999999989, 2.9681639694098), .UNSPECIFIED.);
#2340 = ADVANCED_FACE ('', (#2280), #2330, .T.);
#2350 = CARTESIAN_POINT ('', (-0.349464454272761, -1.14571408475461, -1.77211599158802));
#2360 = VERTEX_POINT ('', #2350);
#2370 = CARTESIAN_POINT ('', (-0.349464454272761, 1.14571408475461, -1.77211599158802));
#2380 = VERTEX_POINT ('', #2370);
#2390 = CARTESIAN_POINT ('', (-0.349464454272761, -1.14571408475461, -1.77211599158802));
#2400 = CARTESIAN_POINT ('', (-0.349464454272761, 1.14571408475461, -1.77211599158802));
#2410 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2390, #2400), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2420 = EDGE_CURVE ('', #2360, #2380, #2410, .T.);
#2430 = ORIENTED_EDGE ('', *, *, #2420, .F.);
#2440 = CARTESIAN_POINT ('', (-0.759743220037421, -1.43710473166355, -2.18239475735268));
#2450 = VERTEX_POINT ('', #2440);
#2460 = CARTESIAN_POINT ('', (-0.349464454272761, -1.14571408475461, -1.77211599158802));
#2470 = CARTESIAN_POINT ('', (-0.349464454272761, -1.27722783384092, -1.77211599158803));
#2480 = CARTESIAN_POINT ('', (-0.471740626128981, -1.36407155033774, -1.89439216344425));
#2490 = CARTESIAN_POINT ('', (-0.5940167979852, -1.45091526683456, -2.01666833530046));
#2500 = CARTESIAN_POINT ('', (-0.759743220037421, -1.43710473166354, -2.18239475735268));
#2510 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2460, #2470, #2480, #2490, #2500), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 0.499999999999995, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.915880067956857, 1., 0.915880067956857, 1.))
   REPRESENTATION_ITEM ('')
);
#2520 = EDGE_CURVE ('', #2360, #2450, #2510, .T.);
#2530 = ORIENTED_EDGE ('', *, *, #2520, .T.);
#2540 = CARTESIAN_POINT ('', (-3.005, -1.25, -4.42765153731522));
#2550 = CARTESIAN_POINT ('', (-0.759743220037421, -1.43710473166355, -2.18239475735268));
#2560 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2540, #2550), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2570 = EDGE_CURVE ('', #890, #2450, #2560, .T.);
#2580 = ORIENTED_EDGE ('', *, *, #2570, .F.);
#2590 = ORIENTED_EDGE ('', *, *, #930, .F.);
#2600 = CARTESIAN_POINT ('', (-0.655000000000001, -1.25, -2.07765153731526));
#2610 = CARTESIAN_POINT ('', (-0.655000000000001, 1.25, -2.07765153731526));
#2620 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2600, #2610), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2630 = EDGE_CURVE ('', #820, #390, #2620, .T.);
#2640 = ORIENTED_EDGE ('', *, *, #2630, .T.);
#2650 = ORIENTED_EDGE ('', *, *, #430, .T.);
#2660 = CARTESIAN_POINT ('', (-0.759743220037421, 1.43710473166355, -2.18239475735267));
#2670 = VERTEX_POINT ('', #2660);
#2680 = CARTESIAN_POINT ('', (-3.005, 1.25, -4.42765153731522));
#2690 = CARTESIAN_POINT ('', (-0.759743220037421, 1.43710473166355, -2.18239475735267));
#2700 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2680, #2690), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2710 = EDGE_CURVE ('', #320, #2670, #2700, .T.);
#2720 = ORIENTED_EDGE ('', *, *, #2710, .T.);
#2730 = CARTESIAN_POINT ('', (-0.759743220037421, 1.43710473166354, -2.18239475735267));
#2740 = CARTESIAN_POINT ('', (-0.5940167979852, 1.45091526683456, -2.01666833530046));
#2750 = CARTESIAN_POINT ('', (-0.471740626128981, 1.36407155033774, -1.89439216344424));
#2760 = CARTESIAN_POINT ('', (-0.349464454272761, 1.27722783384092, -1.77211599158803));
#2770 = CARTESIAN_POINT ('', (-0.349464454272761, 1.14571408475461, -1.77211599158802));
#2780 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2730, #2740, #2750, #2760, #2770), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 0.5, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.915880067956859, 1., 0.915880067956859, 1.))
   REPRESENTATION_ITEM ('')
);
#2790 = EDGE_CURVE ('', #2670, #2380, #2780, .T.);
#2800 = ORIENTED_EDGE ('', *, *, #2790, .T.);
#2810 = EDGE_LOOP ('', (#2430, #2530, #2580, #2590, #2640, #2650, #2720, #2800));
#2820 = FACE_OUTER_BOUND ('', #2810, .T.);
#2830 = CARTESIAN_POINT ('', (-3.006, 1.45091526683456, -4.42865153731522));
#2840 = CARTESIAN_POINT ('', (-3.006, -1.45091526683456, -4.42865153731522));
#2850 = CARTESIAN_POINT ('', (-0.348464454272762, 1.45091526683456, -1.77111599158802));
#2860 = CARTESIAN_POINT ('', (-0.348464454272762, -1.45091526683456, -1.77111599158802));
#2870 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2830, #2840), (#2850, #2860)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 3.75832281125602), (0.00100000000000011, 2.90283053366912), .UNSPECIFIED.);
#2880 = ADVANCED_FACE ('', (#2820), #2870, .T.);
#2890 = ORIENTED_EDGE ('', *, *, #860, .F.);
#2900 = ORIENTED_EDGE ('', *, *, #1580, .T.);
#2910 = ORIENTED_EDGE ('', *, *, #500, .T.);
#2920 = ORIENTED_EDGE ('', *, *, #2630, .F.);
#2930 = EDGE_LOOP ('', (#2890, #2900, #2910, #2920));
#2940 = FACE_OUTER_BOUND ('', #2930, .T.);
#2950 = CARTESIAN_POINT ('', (-0.655000000000001, 1.251, -2.07665153731526));
#2960 = CARTESIAN_POINT ('', (-0.655000000000001, 1.251, -6.87410072348157));
#2970 = CARTESIAN_POINT ('', (-0.655000000000001, -1.251, -2.07665153731526));
#2980 = CARTESIAN_POINT ('', (-0.655000000000001, -1.251, -6.87410072348157));
#2990 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2950, #2960), (#2970, #2980)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 2.502), (4.44089209850063E-16, 4.79744918616631), .UNSPECIFIED.);
#3000 = ADVANCED_FACE ('', (#2940), #2990, .T.);
#3010 = ORIENTED_EDGE ('', *, *, #2070, .F.);
#3020 = CARTESIAN_POINT ('', (-0.00500000000000078, -1.174419455944, 7.19124513789098E-17));
#3030 = CARTESIAN_POINT ('', (-0.349464454272761, -1.14571408475461, -1.77211599158802));
#3040 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3020, #3030), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3050 = EDGE_CURVE ('', #1930, #2360, #3040, .T.);
#3060 = ORIENTED_EDGE ('', *, *, #3050, .T.);
#3070 = ORIENTED_EDGE ('', *, *, #2420, .T.);
#3080 = CARTESIAN_POINT ('', (-0.349464454272761, 1.14571408475461, -1.77211599158802));
#3090 = CARTESIAN_POINT ('', (-0.00500000000000078, 1.174419455944, 0.));
#3100 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3080, #3090), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3110 = EDGE_CURVE ('', #2380, #2030, #3100, .T.);
#3120 = ORIENTED_EDGE ('', *, *, #3110, .T.);
#3130 = EDGE_LOOP ('', (#3010, #3060, #3070, #3120));
#3140 = FACE_OUTER_BOUND ('', #3130, .T.);
#3150 = CARTESIAN_POINT ('', (-0.34968816564219, 1.175419455944, -1.77326688681201));
#3160 = CARTESIAN_POINT ('', (-0.34968816564219, -1.175419455944, -1.77326688681201));
#3170 = CARTESIAN_POINT ('', (-0.0047762886305816, 1.175419455944, 0.00115089522399203));
#3180 = CARTESIAN_POINT ('', (-0.0047762886305816, -1.175419455944, 0.00115089522399203));
#3190 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3150, #3160), (#3170, #3180)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-6.66133814775094E-16, 1.80762901838548), (2.22044604925031E-16, 2.350838911888), .UNSPECIFIED.);
#3200 = ADVANCED_FACE ('', (#3140), #3190, .T.);
#3210 = ORIENTED_EDGE ('', *, *, #2220, .F.);
#3220 = CARTESIAN_POINT ('', (-0.33552865244269, 1.47245594562978, -9.016192303505E-17));
#3230 = CARTESIAN_POINT ('', (-0.759743220037421, 1.43710473166355, -2.18239475735267));
#3240 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3220, #3230), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3250 = EDGE_CURVE ('', #2100, #2670, #3240, .T.);
#3260 = ORIENTED_EDGE ('', *, *, #3250, .T.);
#3270 = ORIENTED_EDGE ('', *, *, #2710, .F.);
#3280 = ORIENTED_EDGE ('', *, *, #360, .T.);
#3290 = EDGE_LOOP ('', (#3210, #3260, #3270, #3280));
#3300 = FACE_OUTER_BOUND ('', #3290, .T.);
#3310 = CARTESIAN_POINT ('', (-3.00607586206897, 1.24991034482759, 0.00100000000000041));
#3320 = CARTESIAN_POINT ('', (-3.00607586206896, 1.24991034482758, -4.42865153731522));
#3330 = CARTESIAN_POINT ('', (-0.334452790373724, 1.47254560080219, 0.0010000000000004));
#3340 = CARTESIAN_POINT ('', (-0.334452790373723, 1.47254560080218, -4.42865153731522));
#3350 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3310, #3320), (#3330, #3340)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (4.44089209850063E-15, 2.68088349139182), (-5.96744875736022E-16, 4.42965153731522), .UNSPECIFIED.);
#3360 = ADVANCED_FACE ('', (#3300), #3350, .T.);
#3370 = ORIENTED_EDGE ('', *, *, #2570, .T.);
#3380 = CARTESIAN_POINT ('', (-0.759743220037421, -1.43710473166355, -2.18239475735268));
#3390 = CARTESIAN_POINT ('', (-0.33552865244269, -1.47245594562978, 0.));
#3400 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3380, #3390), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3410 = EDGE_CURVE ('', #2450, #1860, #3400, .T.);
#3420 = ORIENTED_EDGE ('', *, *, #3410, .T.);
#3430 = ORIENTED_EDGE ('', *, *, #1900, .T.);
#3440 = ORIENTED_EDGE ('', *, *, #1000, .F.);
#3450 = EDGE_LOOP ('', (#3370, #3420, #3430, #3440));
#3460 = FACE_OUTER_BOUND ('', #3450, .T.);
#3470 = CARTESIAN_POINT ('', (-0.334452790373724, -1.47254560080219, 0.0010000000000001));
#3480 = CARTESIAN_POINT ('', (-0.334452790373724, -1.47254560080219, -4.42865153731522));
#3490 = CARTESIAN_POINT ('', (-3.00607586206897, -1.24991034482759, 0.00100000000000009));
#3500 = CARTESIAN_POINT ('', (-3.00607586206897, -1.24991034482759, -4.42865153731522));
#3510 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3470, #3480), (#3490, #3500)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (3.10862446895044E-15, 2.68088349139182), (-1.24249568966839E-16, 4.42965153731522), .UNSPECIFIED.);
#3520 = ADVANCED_FACE ('', (#3460), #3510, .T.);
#3530 = ORIENTED_EDGE ('', *, *, #2520, .F.);
#3540 = ORIENTED_EDGE ('', *, *, #3050, .F.);
#3550 = ORIENTED_EDGE ('', *, *, #2000, .F.);
#3560 = ORIENTED_EDGE ('', *, *, #3410, .F.);
#3570 = EDGE_LOOP ('', (#3530, #3540, #3550, #3560));
#3580 = FACE_OUTER_BOUND ('', #3570, .T.);
#3590 = CARTESIAN_POINT ('', (-0.485213305161103, -1.1344016805139, -2.47048328758906));
#3600 = CARTESIAN_POINT ('', (0.0399227572428325, -1.17816301904758, 0.231107551182094));
#3610 = CARTESIAN_POINT ('', (-0.484303218386282, -0.834439598399606, -2.46580129701677));
#3620 = CARTESIAN_POINT ('', (0.0408328440176532, -0.878200936933286, 0.235789541754378));
#3630 = CARTESIAN_POINT ('', (-0.778791373420584, -0.834439598399605, -2.40855859840381));
#3640 = CARTESIAN_POINT ('', (-0.253655311016648, -0.878200936933286, 0.29303224036734));
#3650 = CARTESIAN_POINT ('', (-1.07327952845489, -0.834439598399605, -2.35131589979085));
#3660 = CARTESIAN_POINT ('', (-0.54814346605095, -0.878200936933286, 0.350274938980302));
#3670 = CARTESIAN_POINT ('', (-1.07418961522971, -1.1344016805139, -2.35599789036313));
#3680 = CARTESIAN_POINT ('', (-0.549053552825771, -1.17816301904758, 0.345592948408017));
#3690 = CARTESIAN_POINT ('', (-1.07509970200453, -1.4343637626282, -2.36067988093542));
#3700 = CARTESIAN_POINT ('', (-0.549963639600591, -1.47812510116188, 0.340910957835733));
#3710 = CARTESIAN_POINT ('', (-0.780611546970226, -1.4343637626282, -2.41792257954838));
#3720 = CARTESIAN_POINT ('', (-0.25547548456629, -1.47812510116188, 0.283668259222771));
#3730 = CARTESIAN_POINT ('', (-0.486123391935924, -1.4343637626282, -2.47516527816134));
#3740 = CARTESIAN_POINT ('', (0.0390126704680117, -1.47812510116188, 0.22642556060981));
#3750 = CARTESIAN_POINT ('', (-0.485213305161103, -1.1344016805139, -2.47048328758906));
#3760 = CARTESIAN_POINT ('', (0.0399227572428325, -1.17816301904758, 0.231107551182094));
#3770 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#3590, #3600), (#3610, #3620), (#3630, #3640), (#3650, #3660), (#3670, #3680), (#3690, #3700), (#3710, #3720), (#3730, #3740), (#3750, #3760)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#3780 = ADVANCED_FACE ('', (#3580), #3770, .T.);
#3790 = ORIENTED_EDGE ('', *, *, #2170, .F.);
#3800 = ORIENTED_EDGE ('', *, *, #3110, .F.);
#3810 = ORIENTED_EDGE ('', *, *, #2790, .F.);
#3820 = ORIENTED_EDGE ('', *, *, #3250, .F.);
#3830 = EDGE_LOOP ('', (#3790, #3800, #3810, #3820));
#3840 = FACE_OUTER_BOUND ('', #3830, .T.);
#3850 = CARTESIAN_POINT ('', (-0.485213305161102, 1.1344016805139, -2.47048328758904));
#3860 = CARTESIAN_POINT ('', (0.0399227572428275, 1.17816301904759, 0.231107551182095));
#3870 = CARTESIAN_POINT ('', (-0.486123391935923, 1.4343637626282, -2.47516527816133));
#3880 = CARTESIAN_POINT ('', (0.0390126704680066, 1.47812510116189, 0.22642556060981));
#3890 = CARTESIAN_POINT ('', (-0.780611546970225, 1.4343637626282, -2.41792257954837));
#3900 = CARTESIAN_POINT ('', (-0.255475484566295, 1.47812510116189, 0.283668259222771));
#3910 = CARTESIAN_POINT ('', (-1.07509970200453, 1.4343637626282, -2.36067988093541));
#3920 = CARTESIAN_POINT ('', (-0.549963639600597, 1.47812510116189, 0.340910957835731));
#3930 = CARTESIAN_POINT ('', (-1.07418961522971, 1.1344016805139, -2.35599789036312));
#3940 = CARTESIAN_POINT ('', (-0.549053552825776, 1.17816301904759, 0.345592948408016));
#3950 = CARTESIAN_POINT ('', (-1.07327952845488, 0.834439598399605, -2.35131589979084));
#3960 = CARTESIAN_POINT ('', (-0.548143466050955, 0.878200936933293, 0.350274938980302));
#3970 = CARTESIAN_POINT ('', (-0.778791373420583, 0.834439598399606, -2.4085585984038));
#3980 = CARTESIAN_POINT ('', (-0.253655311016653, 0.878200936933293, 0.293032240367341));
#3990 = CARTESIAN_POINT ('', (-0.484303218386281, 0.834439598399606, -2.46580129701676));
#4000 = CARTESIAN_POINT ('', (0.0408328440176482, 0.878200936933293, 0.23578954175438));
#4010 = CARTESIAN_POINT ('', (-0.485213305161102, 1.1344016805139, -2.47048328758904));
#4020 = CARTESIAN_POINT ('', (0.0399227572428275, 1.17816301904759, 0.231107551182095));
#4030 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#3850, #3860), (#3870, #3880), (#3890, #3900), (#3910, #3920), (#3930, #3940), (#3950, #3960), (#3970, #3980), (#3990, #4000), (#4010, #4020)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#4040 = ADVANCED_FACE ('', (#3840), #4030, .T.);
#4050 = ORIENTED_EDGE ('', *, *, #1330, .F.);
#4060 = ORIENTED_EDGE ('', *, *, #80, .T.);
#4070 = ORIENTED_EDGE ('', *, *, #1520, .T.);
#4080 = ORIENTED_EDGE ('', *, *, #720, .T.);
#4090 = EDGE_LOOP ('', (#4050, #4060, #4070, #4080));
#4100 = FACE_OUTER_BOUND ('', #4090, .T.);
#4110 = CARTESIAN_POINT ('', (-16.75, -1.251, -6.87410072348157));
#4120 = CARTESIAN_POINT ('', (-16.75, 1.251, -6.87410072348157));
#4130 = CARTESIAN_POINT ('', (-16.75, -1.251, 0.507899276518421));
#4140 = CARTESIAN_POINT ('', (-16.75, 1.251, 0.507899276518421));
#4150 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4110, #4120), (#4130, #4140)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.507899276518421, 6.87410072348157), (-1.251, 1.251), .UNSPECIFIED.);
#4160 = ADVANCED_FACE ('', (#4100), #4150, .T.);
#4170 = CLOSED_SHELL ('', (#640, #1280, #1480, #1680, #1840, #2340, #2880, #3000, #3200, #3360, #3520, #3780, #4040, #4160));
#4180 = MANIFOLD_SOLID_BREP ('CUT', #4170);
#4190 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#4200 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#4210 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#4220 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #4190, 'DISTANCE_ACCURACY_VALUE', '');
#4230 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#4220))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#4190, #4200, #4210))
   REPRESENTATION_CONTEXT ('', '3D')
);
#4240 = COLOUR_RGB ('', 1., 0.74901960784314, 0.);
#4250 = FILL_AREA_STYLE_COLOUR ('', #4240);
#4260 = FILL_AREA_STYLE ('', (#4250));
#4270 = SURFACE_STYLE_FILL_AREA (#4260);
#4280 = SURFACE_SIDE_STYLE ('', (#4270));
#4290 = SURFACE_STYLE_USAGE (.POSITIVE., #4280);
#4300 = PRESENTATION_STYLE_ASSIGNMENT ((#4290));
#4310 = STYLED_ITEM ('', (#4300), #4180);
#4320 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#4180), #4230);
#4330 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#4340 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #4330);
#4350 = MECHANICAL_CONTEXT ('', #4330, 'mechanical');
#4360 = PRODUCT ('NONE', '', '', (#4350));
#4370 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#4380 = PERSON ('', '', $, $, $, $);
#4390 = ORGANIZATION ($, '', '');
#4400 = PERSON_AND_ORGANIZATION (#4380, #4390);
#4410 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#4400, #4370, (#4360));
#4420 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#4360));
#4430 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #4360, .NOT_KNOWN.);
#4440 = APPROVAL_STATUS ('approved');
#4450 = APPROVAL (#4440, '');
#4460 = CALENDAR_DATE (2017, 24, 4);
#4470 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#4480 = LOCAL_TIME (13, 31, 32., #4470);
#4490 = DATE_AND_TIME (#4460, #4480);
#4500 = APPROVAL_DATE_TIME (#4490, #4450);
#4510 = APPROVAL_ROLE ('');
#4520 = PERSON ('', '', $, $, $, $);
#4530 = ORGANIZATION ($, '', '');
#4540 = PERSON_AND_ORGANIZATION (#4520, #4530);
#4550 = APPROVAL_PERSON_ORGANIZATION (#4540, #4450, #4510);
#4560 = CC_DESIGN_APPROVAL (#4450, (#4430));
#4570 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#4580 = PERSON ('', '', $, $, $, $);
#4590 = ORGANIZATION ($, '', '');
#4600 = PERSON_AND_ORGANIZATION (#4580, #4590);
#4610 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#4600, #4570, (#4430));
#4620 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#4630 = PERSON ('', '', $, $, $, $);
#4640 = ORGANIZATION ($, '', '');
#4650 = PERSON_AND_ORGANIZATION (#4630, #4640);
#4660 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#4650, #4620, (#4430));
#4670 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#4680 = SECURITY_CLASSIFICATION ('', '', #4670);
#4690 = APPROVAL_STATUS ('approved');
#4700 = APPROVAL (#4690, '');
#4710 = CALENDAR_DATE (2017, 24, 4);
#4720 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#4730 = LOCAL_TIME (13, 31, 32., #4720);
#4740 = DATE_AND_TIME (#4710, #4730);
#4750 = APPROVAL_DATE_TIME (#4740, #4700);
#4760 = APPROVAL_ROLE ('');
#4770 = PERSON ('', '', $, $, $, $);
#4780 = ORGANIZATION ($, '', '');
#4790 = PERSON_AND_ORGANIZATION (#4770, #4780);
#4800 = APPROVAL_PERSON_ORGANIZATION (#4790, #4700, #4760);
#4810 = CC_DESIGN_APPROVAL (#4700, (#4680));
#4820 = DATE_TIME_ROLE ('classification_date');
#4830 = CALENDAR_DATE (2017, 24, 4);
#4840 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#4850 = LOCAL_TIME (13, 31, 32., #4840);
#4860 = DATE_AND_TIME (#4830, #4850);
#4870 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#4860, #4820, (#4680));
#4880 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#4890 = PERSON ('', '', $, $, $, $);
#4900 = ORGANIZATION ($, '', '');
#4910 = PERSON_AND_ORGANIZATION (#4890, #4900);
#4920 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#4910, #4880, (#4680));
#4930 = CC_DESIGN_SECURITY_CLASSIFICATION (#4680, (#4430));
#4940 = DESIGN_CONTEXT ('', #4330, 'design');
#4950 = PRODUCT_DEFINITION ('', '', #4430, #4940);
#4960 = APPROVAL_STATUS ('approved');
#4970 = APPROVAL (#4960, '');
#4980 = CALENDAR_DATE (2017, 24, 4);
#4990 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#5000 = LOCAL_TIME (13, 31, 32., #4990);
#5010 = DATE_AND_TIME (#4980, #5000);
#5020 = APPROVAL_DATE_TIME (#5010, #4970);
#5030 = APPROVAL_ROLE ('');
#5040 = PERSON ('', '', $, $, $, $);
#5050 = ORGANIZATION ($, '', '');
#5060 = PERSON_AND_ORGANIZATION (#5040, #5050);
#5070 = APPROVAL_PERSON_ORGANIZATION (#5060, #4970, #5030);
#5080 = CC_DESIGN_APPROVAL (#4970, (#4950));
#5090 = DATE_TIME_ROLE ('creation_date');
#5100 = CALENDAR_DATE (2017, 24, 4);
#5110 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#5120 = LOCAL_TIME (13, 31, 32., #5110);
#5130 = DATE_AND_TIME (#5100, #5120);
#5140 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#5130, #5090, (#4950));
#5150 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#5160 = PERSON ('', '', $, $, $, $);
#5170 = ORGANIZATION ($, '', '');
#5180 = PERSON_AND_ORGANIZATION (#5160, #5170);
#5190 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#5180, #5150, (#4950));
#5200 = PRODUCT_DEFINITION_SHAPE ('', '', #4950);
#5210 = SHAPE_DEFINITION_REPRESENTATION (#5200, #4320);
ENDSEC;
END-ISO-10303-21;