ISO-10303-21;
HEADER;
FILE_DESCRIPTION ((), '1');
FILE_NAME ('q:\\engin oezkan\\lieferung_sa\\cad\\comp\\step\\r_nacharbeit\\SA17-3002L-ALU-15 AN1015.stp', '2017-04-24T13:31:44', ('Unknown'), ('TDM'), 'HarmonyWare STEP v2.0.2.9', 'T3D tool generator', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;

DATA;
#10 = CARTESIAN_POINT ('', (-1.33923652229731, 1.25, -6.87310072348157));
#20 = VERTEX_POINT ('', #10);
#30 = CARTESIAN_POINT ('', (-16.75, 1.25, -6.87310072348157));
#40 = VERTEX_POINT ('', #30);
#50 = CARTESIAN_POINT ('', (-1.33923652229731, 1.25, -6.87310072348157));
#60 = CARTESIAN_POINT ('', (-16.75, 1.25, -6.87310072348157));
#70 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#50, #60), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#80 = EDGE_CURVE ('', #20, #40, #70, .T.);
#90 = ORIENTED_EDGE ('', *, *, #80, .T.);
#100 = CARTESIAN_POINT ('', (-16.75, 1.25, 0.506899276518419));
#110 = VERTEX_POINT ('', #100);
#120 = CARTESIAN_POINT ('', (-16.75, 1.25, 0.506899276518419));
#130 = CARTESIAN_POINT ('', (-16.75, 1.25, -6.87310072348157));
#140 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#120, #130), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#150 = EDGE_CURVE ('', #110, #40, #140, .T.);
#160 = ORIENTED_EDGE ('', *, *, #150, .F.);
#170 = CARTESIAN_POINT ('', (-2.79189927651844, 1.25, 0.50689927651842));
#180 = VERTEX_POINT ('', #170);
#190 = CARTESIAN_POINT ('', (-16.75, 1.25, 0.506899276518419));
#200 = CARTESIAN_POINT ('', (-2.79189927651844, 1.25, 0.50689927651842));
#210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#190, #200), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#220 = EDGE_CURVE ('', #110, #180, #210, .T.);
#230 = ORIENTED_EDGE ('', *, *, #220, .T.);
#240 = CARTESIAN_POINT ('', (-2.285, 1.25, -2.00605548681995E-14));
#250 = VERTEX_POINT ('', #240);
#260 = CARTESIAN_POINT ('', (-2.285, 1.25, -2.00605548681995E-14));
#270 = CARTESIAN_POINT ('', (-2.79189927651844, 1.25, 0.50689927651842));
#280 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#260, #270), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#290 = EDGE_CURVE ('', #250, #180, #280, .T.);
#300 = ORIENTED_EDGE ('', *, *, #290, .F.);
#310 = CARTESIAN_POINT ('', (-2.935, 1.25, -2.00605548681995E-14));
#320 = VERTEX_POINT ('', #310);
#330 = CARTESIAN_POINT ('', (-2.935, 1.25, -2.00605548681995E-14));
#340 = CARTESIAN_POINT ('', (-2.285, 1.25, -2.00605548681995E-14));
#350 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#330, #340), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#360 = EDGE_CURVE ('', #320, #250, #350, .T.);
#370 = ORIENTED_EDGE ('', *, *, #360, .F.);
#380 = CARTESIAN_POINT ('', (-2.935, 1.25, -4.42765153731522));
#390 = VERTEX_POINT ('', #380);
#400 = CARTESIAN_POINT ('', (-2.935, 1.25, -4.42765153731522));
#410 = CARTESIAN_POINT ('', (-2.935, 1.25, -2.04281036531029E-14));
#420 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#400, #410), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#430 = EDGE_CURVE ('', #390, #320, #420, .T.);
#440 = ORIENTED_EDGE ('', *, *, #430, .F.);
#450 = CARTESIAN_POINT ('', (-0.585000000000001, 1.25, -2.07765153731526));
#460 = VERTEX_POINT ('', #450);
#470 = CARTESIAN_POINT ('', (-0.585000000000001, 1.25, -2.07765153731526));
#480 = CARTESIAN_POINT ('', (-2.935, 1.25, -4.42765153731522));
#490 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#470, #480), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#500 = EDGE_CURVE ('', #460, #390, #490, .T.);
#510 = ORIENTED_EDGE ('', *, *, #500, .F.);
#520 = CARTESIAN_POINT ('', (-0.585000000000001, 1.25, -2.99289019370531));
#530 = VERTEX_POINT ('', #520);
#540 = CARTESIAN_POINT ('', (-0.585000000000001, 1.25, -2.99289019370531));
#550 = CARTESIAN_POINT ('', (-0.585000000000001, 1.25, -2.07765153731526));
#560 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#540, #550), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#570 = EDGE_CURVE ('', #530, #460, #560, .T.);
#580 = ORIENTED_EDGE ('', *, *, #570, .F.);
#590 = CARTESIAN_POINT ('', (-1.33923652229731, 1.25, -6.87310072348157));
#600 = CARTESIAN_POINT ('', (-0.585000000000001, 1.25, -2.99289019370531));
#610 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#590, #600), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#620 = EDGE_CURVE ('', #20, #530, #610, .T.);
#630 = ORIENTED_EDGE ('', *, *, #620, .F.);
#640 = EDGE_LOOP ('', (#90, #160, #230, #300, #370, #440, #510, #580, #630));
#650 = FACE_OUTER_BOUND ('', #640, .T.);
#660 = CARTESIAN_POINT ('', (-16.751, 1.25, 0.50789927651842));
#670 = CARTESIAN_POINT ('', (-16.751, 1.25, -6.87410072348157));
#680 = CARTESIAN_POINT ('', (-0.584000000000003, 1.25, 0.50789927651842));
#690 = CARTESIAN_POINT ('', (-0.584000000000003, 1.25, -6.87410072348157));
#700 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#660, #670), (#680, #690)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.692780191585001, 15.474219808415), (0., 7.38199999999999), .UNSPECIFIED.);
#710 = ADVANCED_FACE ('', (#650), #700, .T.);
#720 = CARTESIAN_POINT ('', (-16.75, -1.25, 0.50689927651842));
#730 = VERTEX_POINT ('', #720);
#740 = CARTESIAN_POINT ('', (-16.75, -1.25, -6.87310072348157));
#750 = VERTEX_POINT ('', #740);
#760 = CARTESIAN_POINT ('', (-16.75, -1.25, 0.50689927651842));
#770 = CARTESIAN_POINT ('', (-16.75, -1.25, -6.87310072348157));
#780 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#760, #770), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#790 = EDGE_CURVE ('', #730, #750, #780, .T.);
#800 = ORIENTED_EDGE ('', *, *, #790, .T.);
#810 = CARTESIAN_POINT ('', (-2.04782238727133, -1.25, -6.87310072348157));
#820 = VERTEX_POINT ('', #810);
#830 = CARTESIAN_POINT ('', (-2.04782238727133, -1.25, -6.87310072348157));
#840 = CARTESIAN_POINT ('', (-16.75, -1.25, -6.87310072348157));
#850 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#830, #840), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#860 = EDGE_CURVE ('', #820, #750, #850, .T.);
#870 = ORIENTED_EDGE ('', *, *, #860, .F.);
#880 = CARTESIAN_POINT ('', (-1.21278019158504, -1.25, -2.70543172890029));
#890 = VERTEX_POINT ('', #880);
#900 = CARTESIAN_POINT ('', (-2.0478223872713, -1.25, -6.87310072348142));
#910 = CARTESIAN_POINT ('', (-1.67443705625354, -1.25, -5.05690116051941));
#920 = CARTESIAN_POINT ('', (-1.21278019158502, -1.25, -2.70543172890013));
#930 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#900, #910, #920), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.980584537917435, 1.))
   REPRESENTATION_ITEM ('')
);
#940 = EDGE_CURVE ('', #820, #890, #930, .T.);
#950 = ORIENTED_EDGE ('', *, *, #940, .T.);
#960 = CARTESIAN_POINT ('', (-2.935, -1.25, -4.42765153731522));
#970 = VERTEX_POINT ('', #960);
#980 = CARTESIAN_POINT ('', (-1.21278019158504, -1.25, -2.70543172890029));
#990 = CARTESIAN_POINT ('', (-2.935, -1.25, -4.42765153731522));
#1000 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#980, #990), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1010 = EDGE_CURVE ('', #890, #970, #1000, .T.);
#1020 = ORIENTED_EDGE ('', *, *, #1010, .T.);
#1030 = CARTESIAN_POINT ('', (-2.935, -1.25, -1.99074740183061E-14));
#1040 = VERTEX_POINT ('', #1030);
#1050 = CARTESIAN_POINT ('', (-2.935, -1.25, -4.42765153731522));
#1060 = CARTESIAN_POINT ('', (-2.935, -1.25, -1.95399252334028E-14));
#1070 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1050, #1060), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1080 = EDGE_CURVE ('', #970, #1040, #1070, .T.);
#1090 = ORIENTED_EDGE ('', *, *, #1080, .T.);
#1100 = CARTESIAN_POINT ('', (-2.285, -1.25, -1.99074740183061E-14));
#1110 = VERTEX_POINT ('', #1100);
#1120 = CARTESIAN_POINT ('', (-2.935, -1.25, -1.99074740183061E-14));
#1130 = CARTESIAN_POINT ('', (-2.285, -1.25, -1.99074740183061E-14));
#1140 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1120, #1130), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1150 = EDGE_CURVE ('', #1040, #1110, #1140, .T.);
#1160 = ORIENTED_EDGE ('', *, *, #1150, .T.);
#1170 = CARTESIAN_POINT ('', (-2.79189927651844, -1.25, 0.50689927651842));
#1180 = VERTEX_POINT ('', #1170);
#1190 = CARTESIAN_POINT ('', (-2.79189927651844, -1.25, 0.50689927651842));
#1200 = CARTESIAN_POINT ('', (-2.285, -1.25, -1.99840144432528E-14));
#1210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1190, #1200), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1220 = EDGE_CURVE ('', #1180, #1110, #1210, .T.);
#1230 = ORIENTED_EDGE ('', *, *, #1220, .F.);
#1240 = CARTESIAN_POINT ('', (-16.75, -1.25, 0.50689927651842));
#1250 = CARTESIAN_POINT ('', (-2.79189927651844, -1.25, 0.50689927651842));
#1260 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1240, #1250), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1270 = EDGE_CURVE ('', #730, #1180, #1260, .T.);
#1280 = ORIENTED_EDGE ('', *, *, #1270, .F.);
#1290 = EDGE_LOOP ('', (#800, #870, #950, #1020, #1090, #1160, #1230, #1280));
#1300 = FACE_OUTER_BOUND ('', #1290, .T.);
#1310 = CARTESIAN_POINT ('', (-1.21178019158504, -1.25, 0.50789927651842));
#1320 = CARTESIAN_POINT ('', (-1.21178019158504, -1.25, -6.87410072348157));
#1330 = CARTESIAN_POINT ('', (-16.751, -1.25, 0.50789927651842));
#1340 = CARTESIAN_POINT ('', (-16.751, -1.25, -6.87410072348157));
#1350 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1310, #1320), (#1330, #1340)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (2.02060590481778E-14, 15.539219808415), (0., 7.38199999999999), .UNSPECIFIED.);
#1360 = ADVANCED_FACE ('', (#1300), #1350, .T.);
#1370 = ORIENTED_EDGE ('', *, *, #860, .T.);
#1380 = CARTESIAN_POINT ('', (-16.75, -1.25, -6.87310072348157));
#1390 = CARTESIAN_POINT ('', (-16.75, 1.25, -6.87310072348157));
#1400 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1380, #1390), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1410 = EDGE_CURVE ('', #750, #40, #1400, .T.);
#1420 = ORIENTED_EDGE ('', *, *, #1410, .T.);
#1430 = ORIENTED_EDGE ('', *, *, #80, .F.);
#1440 = CARTESIAN_POINT ('', (-1.99799531016921, -1.1633513060552, -6.87310072348157));
#1450 = VERTEX_POINT ('', #1440);
#1460 = CARTESIAN_POINT ('', (-1.99799531016921, -1.1633513060552, -6.87310072348157));
#1470 = CARTESIAN_POINT ('', (-1.33923652229731, 1.25, -6.87310072348157));
#1480 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1460, #1470), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1490 = EDGE_CURVE ('', #1450, #20, #1480, .T.);
#1500 = ORIENTED_EDGE ('', *, *, #1490, .F.);
#1510 = CARTESIAN_POINT ('', (-1.99799531016921, -1.1633513060552, -6.87310072348157));
#1520 = CARTESIAN_POINT ('', (-2.01154884912179, -1.21300445912895, -6.87310072348157));
#1530 = CARTESIAN_POINT ('', (-2.04782238727133, -1.25, -6.87310072348157));
#1540 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1510, #1520, #1530), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.968479919359368, 1.))
   REPRESENTATION_ITEM ('')
);
#1550 = EDGE_CURVE ('', #1450, #820, #1540, .T.);
#1560 = ORIENTED_EDGE ('', *, *, #1550, .T.);
#1570 = EDGE_LOOP ('', (#1370, #1420, #1430, #1500, #1560));
#1580 = FACE_OUTER_BOUND ('', #1570, .T.);
#1590 = CARTESIAN_POINT ('', (-16.751, 1.251, -6.87310072348157));
#1600 = CARTESIAN_POINT ('', (-16.751, -1.251, -6.87310072348157));
#1610 = CARTESIAN_POINT ('', (-1.33823652229731, 1.251, -6.87310072348157));
#1620 = CARTESIAN_POINT ('', (-1.33823652229731, -1.251, -6.87310072348157));
#1630 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1590, #1600), (#1610, #1620)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.819236522297301, 14.5935269554054), (-2.22044604925031E-16, 2.502), .UNSPECIFIED.);
#1640 = ADVANCED_FACE ('', (#1580), #1630, .T.);
#1650 = CARTESIAN_POINT ('', (-0.00992984843588118, 1.22549580982531, -7.50399760435529E-17));
#1660 = VERTEX_POINT ('', #1650);
#1670 = CARTESIAN_POINT ('', (-0.691713884757361, -1.27220809150619, -9.69206233834576E-15));
#1680 = VERTEX_POINT ('', #1670);
#1690 = CARTESIAN_POINT ('', (-0.00992984843588118, 1.22549580982531, -7.50399760435529E-17));
#1700 = CARTESIAN_POINT ('', (-0.691713884757361, -1.27220809150619, -9.69206233834576E-15));
#1710 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1690, #1700), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1720 = EDGE_CURVE ('', #1660, #1680, #1710, .T.);
#1730 = ORIENTED_EDGE ('', *, *, #1720, .F.);
#1740 = CARTESIAN_POINT ('', (-0.223506676914461, 1.4759577769238, -9.03763483593187E-17));
#1750 = VERTEX_POINT ('', #1740);
#1760 = CARTESIAN_POINT ('', (-0.0099298484358723, 1.22549580982531, 1.25722765350664E-15));
#1770 = CARTESIAN_POINT ('', (0.0174528119392576, 1.32581170753509, 1.25108507635494E-15));
#1780 = CARTESIAN_POINT ('', (-0.0503104215455945, 1.40527778480795, 1.24621918249629E-15));
#1790 = CARTESIAN_POINT ('', (-0.118073655030447, 1.4847438620808, 7.97264078787579E-16));
#1800 = CARTESIAN_POINT ('', (-0.223506676914461, 1.4759577769238, -9.03763483593185E-17));
#1810 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1760, #1770, #1780, #1790, #1800), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 0.5, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.887666868155206, 1., 0.887666868155206, 1.))
   REPRESENTATION_ITEM ('')
);
#1820 = EDGE_CURVE ('', #1660, #1750, #1810, .T.);
#1830 = ORIENTED_EDGE ('', *, *, #1820, .T.);
#1840 = CARTESIAN_POINT ('', (-0.223506676914461, 1.4759577769238, -9.03763483593187E-17));
#1850 = CARTESIAN_POINT ('', (-2.935, 1.25, -2.00605548681995E-14));
#1860 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1840, #1850), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1870 = EDGE_CURVE ('', #1750, #320, #1860, .T.);
#1880 = ORIENTED_EDGE ('', *, *, #1870, .T.);
#1890 = ORIENTED_EDGE ('', *, *, #360, .T.);
#1900 = CARTESIAN_POINT ('', (-2.285, -1.25, -1.99074740183061E-14));
#1910 = CARTESIAN_POINT ('', (-2.285, 1.25, -2.00605548681995E-14));
#1920 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1900, #1910), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1930 = EDGE_CURVE ('', #1110, #250, #1920, .T.);
#1940 = ORIENTED_EDGE ('', *, *, #1930, .F.);
#1950 = ORIENTED_EDGE ('', *, *, #1150, .F.);
#1960 = CARTESIAN_POINT ('', (-0.904964573070821, -1.41916961891077, -9.68306354013907E-15));
#1970 = VERTEX_POINT ('', #1960);
#1980 = CARTESIAN_POINT ('', (-0.904964573070821, -1.41916961891077, -9.68306354013907E-15));
#1990 = CARTESIAN_POINT ('', (-2.935, -1.25, -1.99074740183061E-14));
#2000 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1980, #1990), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2010 = EDGE_CURVE ('', #1970, #1040, #2000, .T.);
#2020 = ORIENTED_EDGE ('', *, *, #2010, .F.);
#2030 = CARTESIAN_POINT ('', (-0.904964573070821, -1.41916961891077, -9.68306354013907E-15));
#2040 = CARTESIAN_POINT ('', (-0.735679861316179, -1.43327667822365, -7.90584289248717E-15));
#2050 = CARTESIAN_POINT ('', (-0.691713884757357, -1.27220809150619, -8.35979470879557E-15));
#2060 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2030, #2040, #2050), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.767848630101742, 1.))
   REPRESENTATION_ITEM ('')
);
#2070 = EDGE_CURVE ('', #1970, #1680, #2060, .T.);
#2080 = ORIENTED_EDGE ('', *, *, #2070, .T.);
#2090 = EDGE_LOOP ('', (#1730, #1830, #1880, #1890, #1940, #1950, #2020, #2080));
#2100 = FACE_OUTER_BOUND ('', #2090, .T.);
#2110 = CARTESIAN_POINT ('', (0.0174528119392576, 1.4847438620808, -5.41617271298076E-16));
#2120 = CARTESIAN_POINT ('', (0.0174528119392576, -1.43327667822365, -3.62940045571573E-16));
#2130 = CARTESIAN_POINT ('', (-2.936, 1.4847438620808, -2.00749287841653E-14));
#2140 = CARTESIAN_POINT ('', (-2.936, -1.43327667822365, -1.98962515584388E-14));
#2150 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2110, #2120), (#2130, #2140)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.000999999999999491, 2.95445281193926), (0.00099999999999989, 2.91902054030445), .UNSPECIFIED.);
#2160 = ADVANCED_FACE ('', (#2100), #2150, .T.);
#2170 = ORIENTED_EDGE ('', *, *, #1010, .F.);
#2180 = CARTESIAN_POINT ('', (-1.46757694156489, -1.37228525486959, -2.96022847888014));
#2190 = VERTEX_POINT ('', #2180);
#2200 = CARTESIAN_POINT ('', (-1.21278019158505, -1.25, -2.70543172890029));
#2210 = CARTESIAN_POINT ('', (-1.2806871532873, -1.38785940389272, -2.77333869060254));
#2220 = CARTESIAN_POINT ('', (-1.46757694156489, -1.37228525486959, -2.96022847888013));
#2230 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2200, #2210, #2220), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.801525778744154, 1.))
   REPRESENTATION_ITEM ('')
);
#2240 = EDGE_CURVE ('', #890, #2190, #2230, .T.);
#2250 = ORIENTED_EDGE ('', *, *, #2240, .T.);
#2260 = CARTESIAN_POINT ('', (-2.935, -1.25, -4.42765153731522));
#2270 = CARTESIAN_POINT ('', (-1.46757694156489, -1.37228525486959, -2.96022847888014));
#2280 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2260, #2270), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2290 = EDGE_CURVE ('', #970, #2190, #2280, .T.);
#2300 = ORIENTED_EDGE ('', *, *, #2290, .F.);
#2310 = EDGE_LOOP ('', (#2170, #2250, #2300));
#2320 = FACE_OUTER_BOUND ('', #2310, .T.);
#2330 = CARTESIAN_POINT ('', (-2.936, -1.249, -4.42865153731522));
#2340 = CARTESIAN_POINT ('', (-2.936, -1.38785940389272, -4.42865153731522));
#2350 = CARTESIAN_POINT ('', (-1.21178019158504, -1.249, -2.70443172890029));
#2360 = CARTESIAN_POINT ('', (-1.21178019158504, -1.38785940389272, -2.70443172890029));
#2370 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2330, #2340), (#2350, #2360)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 2.43841503757276), (0., 0.13885940389272), .UNSPECIFIED.);
#2380 = ADVANCED_FACE ('', (#2320), #2370, .T.);
#2390 = CARTESIAN_POINT ('', (-0.649613474757881, 1.44044887710351, -2.14226501207314));
#2400 = VERTEX_POINT ('', #2390);
#2410 = CARTESIAN_POINT ('', (-2.935, 1.25, -4.42765153731522));
#2420 = CARTESIAN_POINT ('', (-0.649613474757881, 1.44044887710351, -2.14226501207314));
#2430 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2410, #2420), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2440 = EDGE_CURVE ('', #390, #2400, #2430, .T.);
#2450 = ORIENTED_EDGE ('', *, *, #2440, .T.);
#2460 = CARTESIAN_POINT ('', (-0.383007422212451, 1.1944060120106, -1.87565895952771));
#2470 = VERTEX_POINT ('', #2460);
#2480 = CARTESIAN_POINT ('', (-0.649613474757885, 1.4404488771035, -2.14226501207313));
#2490 = CARTESIAN_POINT ('', (-0.518002372689054, 1.45141646894257, -2.0106539100043));
#2500 = CARTESIAN_POINT ('', (-0.433414131933704, 1.37335247560893, -1.92606566924896));
#2510 = CARTESIAN_POINT ('', (-0.348825891178352, 1.29528848227529, -1.84147742849361));
#2520 = CARTESIAN_POINT ('', (-0.383007422212446, 1.1944060120106, -1.8756589595277));
#2530 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2480, #2490, #2500, #2510, #2520), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 0.499999999999996, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.887666868155215, 1., 0.887666868155215, 1.))
   REPRESENTATION_ITEM ('')
);
#2540 = EDGE_CURVE ('', #2400, #2470, #2530, .T.);
#2550 = ORIENTED_EDGE ('', *, *, #2540, .T.);
#2560 = CARTESIAN_POINT ('', (-0.585000000000001, 0.59825043893183, -2.07765153731526));
#2570 = VERTEX_POINT ('', #2560);
#2580 = CARTESIAN_POINT ('', (-0.585000000000001, 0.59825043893183, -2.07765153731526));
#2590 = CARTESIAN_POINT ('', (-0.383007422212451, 1.1944060120106, -1.87565895952771));
#2600 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2580, #2590), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2610 = EDGE_CURVE ('', #2570, #2470, #2600, .T.);
#2620 = ORIENTED_EDGE ('', *, *, #2610, .F.);
#2630 = CARTESIAN_POINT ('', (-0.585000000000001, 0.59825043893183, -2.07765153731526));
#2640 = CARTESIAN_POINT ('', (-0.585000000000001, 1.25, -2.07765153731526));
#2650 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2630, #2640), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2660 = EDGE_CURVE ('', #2570, #460, #2650, .T.);
#2670 = ORIENTED_EDGE ('', *, *, #2660, .T.);
#2680 = ORIENTED_EDGE ('', *, *, #500, .T.);
#2690 = EDGE_LOOP ('', (#2450, #2550, #2620, #2670, #2680));
#2700 = FACE_OUTER_BOUND ('', #2690, .T.);
#2710 = CARTESIAN_POINT ('', (-2.936, 1.45141646894257, -4.42865153731522));
#2720 = CARTESIAN_POINT ('', (-2.936, 0.59725043893183, -4.42865153731522));
#2730 = CARTESIAN_POINT ('', (-0.348825891178352, 1.45141646894257, -1.84147742849361));
#2740 = CARTESIAN_POINT ('', (-0.348825891178352, 0.59725043893183, -1.84147742849361));
#2750 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2710, #2720), (#2730, #2740)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 3.65881671291607), (0.00100000000000011, 0.85516603001074), .UNSPECIFIED.);
#2760 = ADVANCED_FACE ('', (#2700), #2750, .T.);
#2770 = CARTESIAN_POINT ('', (-0.585000000000001, 1.25, -2.99289019370531));
#2780 = CARTESIAN_POINT ('', (-0.585000000000001, 0.59825043893183, -2.07765153731526));
#2790 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2770, #2780), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2800 = EDGE_CURVE ('', #530, #2570, #2790, .T.);
#2810 = ORIENTED_EDGE ('', *, *, #2800, .F.);
#2820 = ORIENTED_EDGE ('', *, *, #570, .T.);
#2830 = ORIENTED_EDGE ('', *, *, #2660, .F.);
#2840 = EDGE_LOOP ('', (#2810, #2820, #2830));
#2850 = FACE_OUTER_BOUND ('', #2840, .T.);
#2860 = CARTESIAN_POINT ('', (-0.585000000000001, 1.251, -2.07665153731526));
#2870 = CARTESIAN_POINT ('', (-0.585000000000001, 1.251, -2.99389019370531));
#2880 = CARTESIAN_POINT ('', (-0.585000000000001, 0.59725043893183, -2.07665153731526));
#2890 = CARTESIAN_POINT ('', (-0.585000000000001, 0.59725043893183, -2.99389019370531));
#2900 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2860, #2870), (#2880, #2890)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 0.65374956106817), (4.44089209850063E-16, 0.91723865639005), .UNSPECIFIED.);
#2910 = ADVANCED_FACE ('', (#2850), #2900, .T.);
#2920 = ORIENTED_EDGE ('', *, *, #1870, .F.);
#2930 = CARTESIAN_POINT ('', (-0.223506676914461, 1.4759577769238, -9.03763483593187E-17));
#2940 = CARTESIAN_POINT ('', (-0.649613474757881, 1.44044887710351, -2.14226501207314));
#2950 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2930, #2940), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2960 = EDGE_CURVE ('', #1750, #2400, #2950, .T.);
#2970 = ORIENTED_EDGE ('', *, *, #2960, .T.);
#2980 = ORIENTED_EDGE ('', *, *, #2440, .F.);
#2990 = ORIENTED_EDGE ('', *, *, #430, .T.);
#3000 = EDGE_LOOP ('', (#2920, #2970, #2980, #2990));
#3010 = FACE_OUTER_BOUND ('', #3000, .T.);
#3020 = CARTESIAN_POINT ('', (-2.93607586206897, 1.24991034482759, 0.00100000000000042));
#3030 = CARTESIAN_POINT ('', (-2.93607586206896, 1.24991034482758, -4.42865153731522));
#3040 = CARTESIAN_POINT ('', (-0.222430814845495, 1.47604743209621, 0.0010000000000004));
#3050 = CARTESIAN_POINT ('', (-0.222430814845494, 1.4760474320962, -4.42865153731522));
#3060 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3020, #3030), (#3040, #3050)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (4.44089209850063E-15, 2.72305112411773), (-1.57642995879392E-16, 4.42965153731522), .UNSPECIFIED.);
#3070 = ADVANCED_FACE ('', (#3010), #3060, .T.);
#3080 = ORIENTED_EDGE ('', *, *, #2290, .T.);
#3090 = CARTESIAN_POINT ('', (-1.46757694156489, -1.37228525486959, -2.96022847888014));
#3100 = CARTESIAN_POINT ('', (-0.904964573070821, -1.41916961891077, -9.76996261670138E-15));
#3110 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3090, #3100), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3120 = EDGE_CURVE ('', #2190, #1970, #3110, .T.);
#3130 = ORIENTED_EDGE ('', *, *, #3120, .T.);
#3140 = ORIENTED_EDGE ('', *, *, #2010, .T.);
#3150 = ORIENTED_EDGE ('', *, *, #1080, .F.);
#3160 = EDGE_LOOP ('', (#3080, #3130, #3140, #3150));
#3170 = FACE_OUTER_BOUND ('', #3160, .T.);
#3180 = CARTESIAN_POINT ('', (-0.903888711001855, -1.41925927408318, 0.000999999999990327));
#3190 = CARTESIAN_POINT ('', (-0.903888711001855, -1.41925927408318, -4.42865153731522));
#3200 = CARTESIAN_POINT ('', (-2.93607586206897, -1.24991034482759, 0.000999999999990317));
#3210 = CARTESIAN_POINT ('', (-2.93607586206897, -1.24991034482759, -4.42865153731522));
#3220 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3180, #3190), (#3200, #3210)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (1.33226762955019E-15, 2.03923114844842), (3.23959609138669E-16, 4.42965153731521), .UNSPECIFIED.);
#3230 = ADVANCED_FACE ('', (#3170), #3220, .T.);
#3240 = CARTESIAN_POINT ('', (-16.75, -1.25, 0.50689927651842));
#3250 = CARTESIAN_POINT ('', (-16.75, 1.25, 0.506899276518419));
#3260 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3240, #3250), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3270 = EDGE_CURVE ('', #730, #110, #3260, .T.);
#3280 = ORIENTED_EDGE ('', *, *, #3270, .F.);
#3290 = ORIENTED_EDGE ('', *, *, #1270, .T.);
#3300 = CARTESIAN_POINT ('', (-2.79189927651844, 1.25, 0.50689927651842));
#3310 = CARTESIAN_POINT ('', (-2.79189927651844, -1.25, 0.50689927651842));
#3320 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3300, #3310), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3330 = EDGE_CURVE ('', #180, #1180, #3320, .T.);
#3340 = ORIENTED_EDGE ('', *, *, #3330, .F.);
#3350 = ORIENTED_EDGE ('', *, *, #220, .F.);
#3360 = EDGE_LOOP ('', (#3280, #3290, #3340, #3350));
#3370 = FACE_OUTER_BOUND ('', #3360, .T.);
#3380 = CARTESIAN_POINT ('', (-2.79089927651844, 1.251, 0.506899276518419));
#3390 = CARTESIAN_POINT ('', (-2.79089927651844, -1.251, 0.50689927651842));
#3400 = CARTESIAN_POINT ('', (-16.751, 1.251, 0.506899276518419));
#3410 = CARTESIAN_POINT ('', (-16.751, -1.251, 0.50689927651842));
#3420 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3380, #3390), (#3400, #3410)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-8.88178419700125E-16, 13.9601007234816), (0., 2.502), .UNSPECIFIED.);
#3430 = ADVANCED_FACE ('', (#3370), #3420, .T.);
#3440 = ORIENTED_EDGE ('', *, *, #290, .T.);
#3450 = ORIENTED_EDGE ('', *, *, #3330, .T.);
#3460 = ORIENTED_EDGE ('', *, *, #1220, .T.);
#3470 = ORIENTED_EDGE ('', *, *, #1930, .T.);
#3480 = EDGE_LOOP ('', (#3440, #3450, #3460, #3470));
#3490 = FACE_OUTER_BOUND ('', #3480, .T.);
#3500 = CARTESIAN_POINT ('', (-2.284, 1.251, -0.00100000000001995));
#3510 = CARTESIAN_POINT ('', (-2.284, -1.251, -0.00100000000001988));
#3520 = CARTESIAN_POINT ('', (-2.79289927651844, 1.251, 0.507899276518419));
#3530 = CARTESIAN_POINT ('', (-2.79289927651844, -1.251, 0.507899276518419));
#3540 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3500, #3510), (#3520, #3530)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 0.719692258734234), (0., 2.502), .UNSPECIFIED.);
#3550 = ADVANCED_FACE ('', (#3490), #3540, .T.);
#3560 = ORIENTED_EDGE ('', *, *, #2610, .T.);
#3570 = CARTESIAN_POINT ('', (-0.383007422212451, 1.1944060120106, -1.87565895952771));
#3580 = CARTESIAN_POINT ('', (-0.00992984843588118, 1.22549580982531, 0.));
#3590 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3570, #3580), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3600 = EDGE_CURVE ('', #2470, #1660, #3590, .T.);
#3610 = ORIENTED_EDGE ('', *, *, #3600, .T.);
#3620 = ORIENTED_EDGE ('', *, *, #1720, .T.);
#3630 = CARTESIAN_POINT ('', (-0.691713884757361, -1.27220809150619, -9.69206233834576E-15));
#3640 = CARTESIAN_POINT ('', (-1.99799531016921, -1.1633513060552, -6.87310072348157));
#3650 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3630, #3640), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3660 = EDGE_CURVE ('', #1680, #1450, #3650, .T.);
#3670 = ORIENTED_EDGE ('', *, *, #3660, .T.);
#3680 = ORIENTED_EDGE ('', *, *, #1490, .T.);
#3690 = ORIENTED_EDGE ('', *, *, #620, .T.);
#3700 = ORIENTED_EDGE ('', *, *, #2800, .T.);
#3710 = EDGE_LOOP ('', (#3560, #3610, #3620, #3670, #3680, #3690, #3700));
#3720 = FACE_OUTER_BOUND ('', #3710, .T.);
#3730 = CARTESIAN_POINT ('', (-2.04701303883427, -1.26010096505825, -6.98941149744082));
#3740 = CARTESIAN_POINT ('', (-0.760849800459861, -1.61117763333738, 0.12033458244976));
#3750 = CARTESIAN_POINT ('', (-1.26777605827461, 1.59462009427712, -6.98941149744082));
#3760 = CARTESIAN_POINT ('', (0.0183871800997994, 1.243543425998, 0.12033458244976));
#3770 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3730, #3740), (#3750, #3760)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (6.21724893790088E-15, 2.95916248260968), (1.77635683940025E-15, 7.23366850382814), .UNSPECIFIED.);
#3780 = ADVANCED_FACE ('', (#3720), #3770, .T.);
#3790 = ORIENTED_EDGE ('', *, *, #1820, .F.);
#3800 = ORIENTED_EDGE ('', *, *, #3600, .F.);
#3810 = ORIENTED_EDGE ('', *, *, #2540, .F.);
#3820 = ORIENTED_EDGE ('', *, *, #2960, .F.);
#3830 = EDGE_LOOP ('', (#3790, #3800, #3810, #3820));
#3840 = FACE_OUTER_BOUND ('', #3830, .T.);
#3850 = CARTESIAN_POINT ('', (-0.35001725578801, 1.28106843070707, 0.30566512739594));
#3860 = CARTESIAN_POINT ('', (-0.873824971733804, 1.23741778771157, -2.32779425087237));
#3870 = CARTESIAN_POINT ('', (-0.350651462800228, 1.48104200716063, 0.302476632165259));
#3880 = CARTESIAN_POINT ('', (-0.874459178746022, 1.43739136416513, -2.33098274610305));
#3890 = CARTESIAN_POINT ('', (-0.154494122769006, 1.48104200716063, 0.263459995305145));
#3900 = CARTESIAN_POINT ('', (-0.6783018387148, 1.43739136416513, -2.36999938296317));
#3910 = CARTESIAN_POINT ('', (0.0416632172622157, 1.48104200716063, 0.224443358445031));
#3920 = CARTESIAN_POINT ('', (-0.482144498683578, 1.43739136416513, -2.40901601982328));
#3930 = CARTESIAN_POINT ('', (0.0422974242744331, 1.28106843070707, 0.227631853675712));
#3940 = CARTESIAN_POINT ('', (-0.481510291671361, 1.23741778771157, -2.4058275245926));
#3950 = CARTESIAN_POINT ('', (0.0429316312866506, 1.08109485425351, 0.230820348906393));
#3960 = CARTESIAN_POINT ('', (-0.480876084659143, 1.03744421125801, -2.40263902936192));
#3970 = CARTESIAN_POINT ('', (-0.153225708744571, 1.08109485425351, 0.269836985766507));
#3980 = CARTESIAN_POINT ('', (-0.677033424690365, 1.03744421125801, -2.36362239250181));
#3990 = CARTESIAN_POINT ('', (-0.349383048775793, 1.08109485425351, 0.308853622626621));
#4000 = CARTESIAN_POINT ('', (-0.873190764721587, 1.03744421125801, -2.32460575564169));
#4010 = CARTESIAN_POINT ('', (-0.35001725578801, 1.28106843070707, 0.30566512739594));
#4020 = CARTESIAN_POINT ('', (-0.873824971733804, 1.23741778771157, -2.32779425087237));
#4030 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#3850, #3860), (#3870, #3880), (#3890, #3900), (#3910, #3920), (#3930, #3940), (#3950, #3960), (#3970, #3980), (#3990, #4000), (#4010, #4020)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#4040 = ADVANCED_FACE ('', (#3840), #4030, .T.);
#4050 = ORIENTED_EDGE ('', *, *, #2070, .F.);
#4060 = ORIENTED_EDGE ('', *, *, #3120, .F.);
#4070 = ORIENTED_EDGE ('', *, *, #2240, .F.);
#4080 = ORIENTED_EDGE ('', *, *, #940, .F.);
#4090 = ORIENTED_EDGE ('', *, *, #1550, .F.);
#4100 = ORIENTED_EDGE ('', *, *, #3660, .F.);
#4110 = EDGE_LOOP ('', (#4050, #4060, #4070, #4080, #4090, #4100));
#4120 = FACE_OUTER_BOUND ('', #4110, .T.);
#4130 = CARTESIAN_POINT ('', (-2.12396029400774, -1.10051982972434, -7.57238285684083));
#4140 = CARTESIAN_POINT ('', (-0.553291751638307, -1.23140887492189, 0.691811125330463));
#4150 = CARTESIAN_POINT ('', (-2.12337932427846, -0.900544035331433, -7.56932603968874));
#4160 = CARTESIAN_POINT ('', (-0.552710781909025, -1.03143308052899, 0.694867942482548));
#4170 = CARTESIAN_POINT ('', (-2.31986215782022, -0.900544035331434, -7.53198308689438));
#4180 = CARTESIAN_POINT ('', (-0.749193615450786, -1.03143308052899, 0.732210895276907));
#4190 = CARTESIAN_POINT ('', (-2.51634499136198, -0.900544035331434, -7.49464013410002));
#4200 = CARTESIAN_POINT ('', (-0.945676448992547, -1.03143308052899, 0.769553848071267));
#4210 = CARTESIAN_POINT ('', (-2.51692596109126, -1.10051982972434, -7.49769695125211));
#4220 = CARTESIAN_POINT ('', (-0.946257418721829, -1.23140887492189, 0.766497030919182));
#4230 = CARTESIAN_POINT ('', (-2.51750693082054, -1.30049562411724, -7.50075376840419));
#4240 = CARTESIAN_POINT ('', (-0.946838388451111, -1.4313846693148, 0.763440213767097));
#4250 = CARTESIAN_POINT ('', (-2.32102409727878, -1.30049562411724, -7.53809672119855));
#4260 = CARTESIAN_POINT ('', (-0.75035555490935, -1.4313846693148, 0.726097260972738));
#4270 = CARTESIAN_POINT ('', (-2.12454126373702, -1.30049562411724, -7.57543967399291));
#4280 = CARTESIAN_POINT ('', (-0.553872721367589, -1.4313846693148, 0.688754308178378));
#4290 = CARTESIAN_POINT ('', (-2.12396029400774, -1.10051982972434, -7.57238285684083));
#4300 = CARTESIAN_POINT ('', (-0.553291751638307, -1.23140887492189, 0.691811125330463));
#4310 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#4130, #4140), (#4150, #4160), (#4170, #4180), (#4190, #4200), (#4210, #4220), (#4230, #4240), (#4250, #4260), (#4270, #4280), (#4290, #4300)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#4320 = ADVANCED_FACE ('', (#4120), #4310, .T.);
#4330 = ORIENTED_EDGE ('', *, *, #150, .T.);
#4340 = ORIENTED_EDGE ('', *, *, #1410, .F.);
#4350 = ORIENTED_EDGE ('', *, *, #790, .F.);
#4360 = ORIENTED_EDGE ('', *, *, #3270, .T.);
#4370 = EDGE_LOOP ('', (#4330, #4340, #4350, #4360));
#4380 = FACE_OUTER_BOUND ('', #4370, .T.);
#4390 = CARTESIAN_POINT ('', (-16.75, -1.251, -6.87410072348157));
#4400 = CARTESIAN_POINT ('', (-16.75, 1.251, -6.87410072348157));
#4410 = CARTESIAN_POINT ('', (-16.75, -1.251, 0.507899276518422));
#4420 = CARTESIAN_POINT ('', (-16.75, 1.251, 0.507899276518422));
#4430 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4390, #4400), (#4410, #4420)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.50789927651842, 6.87410072348157), (-1.251, 1.251), .UNSPECIFIED.);
#4440 = ADVANCED_FACE ('', (#4380), #4430, .T.);
#4450 = CLOSED_SHELL ('', (#710, #1360, #1640, #2160, #2380, #2760, #2910, #3070, #3230, #3430, #3550, #3780, #4040, #4320, #4440));
#4460 = MANIFOLD_SOLID_BREP ('CUT', #4450);
#4470 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#4480 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#4490 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#4500 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #4470, 'DISTANCE_ACCURACY_VALUE', '');
#4510 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#4500))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#4470, #4480, #4490))
   REPRESENTATION_CONTEXT ('', '3D')
);
#4520 = COLOUR_RGB ('', 1., 0.74901960784314, 0.);
#4530 = FILL_AREA_STYLE_COLOUR ('', #4520);
#4540 = FILL_AREA_STYLE ('', (#4530));
#4550 = SURFACE_STYLE_FILL_AREA (#4540);
#4560 = SURFACE_SIDE_STYLE ('', (#4550));
#4570 = SURFACE_STYLE_USAGE (.POSITIVE., #4560);
#4580 = PRESENTATION_STYLE_ASSIGNMENT ((#4570));
#4590 = STYLED_ITEM ('', (#4580), #4460);
#4600 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#4460), #4510);
#4610 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#4620 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #4610);
#4630 = MECHANICAL_CONTEXT ('', #4610, 'mechanical');
#4640 = PRODUCT ('NONE', '', '', (#4630));
#4650 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#4660 = PERSON ('', '', $, $, $, $);
#4670 = ORGANIZATION ($, '', '');
#4680 = PERSON_AND_ORGANIZATION (#4660, #4670);
#4690 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#4680, #4650, (#4640));
#4700 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#4640));
#4710 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #4640, .NOT_KNOWN.);
#4720 = APPROVAL_STATUS ('approved');
#4730 = APPROVAL (#4720, '');
#4740 = CALENDAR_DATE (2017, 24, 4);
#4750 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#4760 = LOCAL_TIME (13, 31, 44., #4750);
#4770 = DATE_AND_TIME (#4740, #4760);
#4780 = APPROVAL_DATE_TIME (#4770, #4730);
#4790 = APPROVAL_ROLE ('');
#4800 = PERSON ('', '', $, $, $, $);
#4810 = ORGANIZATION ($, '', '');
#4820 = PERSON_AND_ORGANIZATION (#4800, #4810);
#4830 = APPROVAL_PERSON_ORGANIZATION (#4820, #4730, #4790);
#4840 = CC_DESIGN_APPROVAL (#4730, (#4710));
#4850 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#4860 = PERSON ('', '', $, $, $, $);
#4870 = ORGANIZATION ($, '', '');
#4880 = PERSON_AND_ORGANIZATION (#4860, #4870);
#4890 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#4880, #4850, (#4710));
#4900 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#4910 = PERSON ('', '', $, $, $, $);
#4920 = ORGANIZATION ($, '', '');
#4930 = PERSON_AND_ORGANIZATION (#4910, #4920);
#4940 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#4930, #4900, (#4710));
#4950 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#4960 = SECURITY_CLASSIFICATION ('', '', #4950);
#4970 = APPROVAL_STATUS ('approved');
#4980 = APPROVAL (#4970, '');
#4990 = CALENDAR_DATE (2017, 24, 4);
#5000 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#5010 = LOCAL_TIME (13, 31, 44., #5000);
#5020 = DATE_AND_TIME (#4990, #5010);
#5030 = APPROVAL_DATE_TIME (#5020, #4980);
#5040 = APPROVAL_ROLE ('');
#5050 = PERSON ('', '', $, $, $, $);
#5060 = ORGANIZATION ($, '', '');
#5070 = PERSON_AND_ORGANIZATION (#5050, #5060);
#5080 = APPROVAL_PERSON_ORGANIZATION (#5070, #4980, #5040);
#5090 = CC_DESIGN_APPROVAL (#4980, (#4960));
#5100 = DATE_TIME_ROLE ('classification_date');
#5110 = CALENDAR_DATE (2017, 24, 4);
#5120 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#5130 = LOCAL_TIME (13, 31, 44., #5120);
#5140 = DATE_AND_TIME (#5110, #5130);
#5150 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#5140, #5100, (#4960));
#5160 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#5170 = PERSON ('', '', $, $, $, $);
#5180 = ORGANIZATION ($, '', '');
#5190 = PERSON_AND_ORGANIZATION (#5170, #5180);
#5200 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#5190, #5160, (#4960));
#5210 = CC_DESIGN_SECURITY_CLASSIFICATION (#4960, (#4710));
#5220 = DESIGN_CONTEXT ('', #4610, 'design');
#5230 = PRODUCT_DEFINITION ('', '', #4710, #5220);
#5240 = APPROVAL_STATUS ('approved');
#5250 = APPROVAL (#5240, '');
#5260 = CALENDAR_DATE (2017, 24, 4);
#5270 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#5280 = LOCAL_TIME (13, 31, 44., #5270);
#5290 = DATE_AND_TIME (#5260, #5280);
#5300 = APPROVAL_DATE_TIME (#5290, #5250);
#5310 = APPROVAL_ROLE ('');
#5320 = PERSON ('', '', $, $, $, $);
#5330 = ORGANIZATION ($, '', '');
#5340 = PERSON_AND_ORGANIZATION (#5320, #5330);
#5350 = APPROVAL_PERSON_ORGANIZATION (#5340, #5250, #5310);
#5360 = CC_DESIGN_APPROVAL (#5250, (#5230));
#5370 = DATE_TIME_ROLE ('creation_date');
#5380 = CALENDAR_DATE (2017, 24, 4);
#5390 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#5400 = LOCAL_TIME (13, 31, 44., #5390);
#5410 = DATE_AND_TIME (#5380, #5400);
#5420 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#5410, #5370, (#5230));
#5430 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#5440 = PERSON ('', '', $, $, $, $);
#5450 = ORGANIZATION ($, '', '');
#5460 = PERSON_AND_ORGANIZATION (#5440, #5450);
#5470 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#5460, #5430, (#5230));
#5480 = PRODUCT_DEFINITION_SHAPE ('', '', #5230);
#5490 = SHAPE_DEFINITION_REPRESENTATION (#5480, #4600);
ENDSEC;
END-ISO-10303-21;