ISO-10303-21;
HEADER;
FILE_DESCRIPTION ((), '1');
FILE_NAME ('q:\\engin ozkan\\arno\\SA16-2002N-F1 AP2220.stp', '2017-02-24T14:57:19', ('Unknown'), ('TDM'), 'HarmonyWare STEP v2.0.2.9', 'T3D tool generator', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;

DATA;
#10 = CARTESIAN_POINT ('', (-15.355, 0.75, -4.79870943090326));
#20 = VERTEX_POINT ('', #10);
#30 = CARTESIAN_POINT ('', (-0.654999999999998, 0.750000000000001, -4.79870943090326));
#40 = VERTEX_POINT ('', #30);
#50 = CARTESIAN_POINT ('', (-15.355, 0.75, -4.79870943090326));
#60 = CARTESIAN_POINT ('', (-0.654999999999998, 0.750000000000001, -4.79870943090326));
#70 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#50, #60), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#80 = EDGE_CURVE ('', #20, #40, #70, .T.);
#90 = ORIENTED_EDGE ('', *, *, #80, .T.);
#100 = CARTESIAN_POINT ('', (-0.654999999999998, -0.75, -4.79870943090326));
#110 = VERTEX_POINT ('', #100);
#120 = CARTESIAN_POINT ('', (-0.654999999999998, 0.750000000000001, -4.79870943090326));
#130 = CARTESIAN_POINT ('', (-0.654999999999998, -0.75, -4.79870943090326));
#140 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#120, #130), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#150 = EDGE_CURVE ('', #40, #110, #140, .T.);
#160 = ORIENTED_EDGE ('', *, *, #150, .T.);
#170 = CARTESIAN_POINT ('', (-15.355, -0.75, -4.79870943090326));
#180 = VERTEX_POINT ('', #170);
#190 = CARTESIAN_POINT ('', (-15.355, -0.75, -4.79870943090326));
#200 = CARTESIAN_POINT ('', (-0.654999999999998, -0.75, -4.79870943090326));
#210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#190, #200), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#220 = EDGE_CURVE ('', #180, #110, #210, .T.);
#230 = ORIENTED_EDGE ('', *, *, #220, .F.);
#240 = CARTESIAN_POINT ('', (-15.355, 0.75, -4.79870943090326));
#250 = CARTESIAN_POINT ('', (-15.355, -0.750000000000001, -4.79870943090326));
#260 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#240, #250), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#270 = EDGE_CURVE ('', #20, #180, #260, .T.);
#280 = ORIENTED_EDGE ('', *, *, #270, .F.);
#290 = EDGE_LOOP ('', (#90, #160, #230, #280));
#300 = FACE_OUTER_BOUND ('', #290, .T.);
#310 = CARTESIAN_POINT ('', (-15.356, 0.750999999999999, -4.79870943090326));
#320 = CARTESIAN_POINT ('', (-15.356, -0.751000000000001, -4.79870943090326));
#330 = CARTESIAN_POINT ('', (-0.653999999999996, 0.751, -4.79870943090326));
#340 = CARTESIAN_POINT ('', (-0.653999999999996, -0.751, -4.79870943090326));
#350 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#310, #320), (#330, #340)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.533719167738919, 15.2357191677389), (-10.001, -8.499), .UNSPECIFIED.);
#360 = ADVANCED_FACE ('', (#300), #350, .T.);
#370 = ORIENTED_EDGE ('', *, *, #220, .T.);
#380 = CARTESIAN_POINT ('', (-0.654999999999998, -0.75, -1.92059232631025));
#390 = VERTEX_POINT ('', #380);
#400 = CARTESIAN_POINT ('', (-0.654999999999998, -0.75, -4.79870943090326));
#410 = CARTESIAN_POINT ('', (-0.654999999999998, -0.75, -1.92059232631025));
#420 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#400, #410), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#430 = EDGE_CURVE ('', #110, #390, #420, .T.);
#440 = ORIENTED_EDGE ('', *, *, #430, .T.);
#450 = CARTESIAN_POINT ('', (-3.005, -0.749999999999997, -4.27059232631023));
#460 = VERTEX_POINT ('', #450);
#470 = CARTESIAN_POINT ('', (-0.654999999999998, -0.75, -1.92059232631025));
#480 = CARTESIAN_POINT ('', (-3.005, -0.749999999999997, -4.27059232631023));
#490 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#470, #480), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#500 = EDGE_CURVE ('', #390, #460, #490, .T.);
#510 = ORIENTED_EDGE ('', *, *, #500, .T.);
#520 = CARTESIAN_POINT ('', (-3.005, -0.75, -1.82076576038526E-14));
#530 = VERTEX_POINT ('', #520);
#540 = CARTESIAN_POINT ('', (-3.005, -0.749999999999997, -4.27059232631023));
#550 = CARTESIAN_POINT ('', (-3.005, -0.75, -1.82076576038526E-14));
#560 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#540, #550), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#570 = EDGE_CURVE ('', #460, #530, #560, .T.);
#580 = ORIENTED_EDGE ('', *, *, #570, .T.);
#590 = CARTESIAN_POINT ('', (-2.355, -0.75, -1.55431223447522E-14));
#600 = VERTEX_POINT ('', #590);
#610 = CARTESIAN_POINT ('', (-3.005, -0.75, -1.82076576038526E-14));
#620 = CARTESIAN_POINT ('', (-2.355, -0.75, -1.55431223447522E-14));
#630 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#610, #620), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#640 = EDGE_CURVE ('', #530, #600, #630, .T.);
#650 = ORIENTED_EDGE ('', *, *, #640, .T.);
#660 = CARTESIAN_POINT ('', (-2.83629056909676, -0.75, 0.481290569096736));
#670 = VERTEX_POINT ('', #660);
#680 = CARTESIAN_POINT ('', (-2.355, -0.75, -1.55431223447522E-14));
#690 = CARTESIAN_POINT ('', (-2.83629056909676, -0.75, 0.481290569096736));
#700 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#680, #690), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#710 = EDGE_CURVE ('', #600, #670, #700, .T.);
#720 = ORIENTED_EDGE ('', *, *, #710, .T.);
#730 = CARTESIAN_POINT ('', (-13.1737094309032, -0.750000000000001, 0.481290569096736));
#740 = VERTEX_POINT ('', #730);
#750 = CARTESIAN_POINT ('', (-2.83629056909676, -0.75, 0.481290569096736));
#760 = CARTESIAN_POINT ('', (-13.1737094309032, -0.750000000000001, 0.481290569096736));
#770 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#750, #760), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#780 = EDGE_CURVE ('', #670, #740, #770, .T.);
#790 = ORIENTED_EDGE ('', *, *, #780, .T.);
#800 = CARTESIAN_POINT ('', (-13.655, -0.750000000000001, -1.55431223447522E-14));
#810 = VERTEX_POINT ('', #800);
#820 = CARTESIAN_POINT ('', (-13.655, -0.750000000000001, -1.55431223447522E-14));
#830 = CARTESIAN_POINT ('', (-13.1737094309032, -0.750000000000001, 0.481290569096736));
#840 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#820, #830), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#850 = EDGE_CURVE ('', #810, #740, #840, .T.);
#860 = ORIENTED_EDGE ('', *, *, #850, .F.);
#870 = CARTESIAN_POINT ('', (-13.005, -0.750000000000001, -1.82076576038526E-14));
#880 = VERTEX_POINT ('', #870);
#890 = CARTESIAN_POINT ('', (-13.005, -0.750000000000001, -1.82076576038526E-14));
#900 = CARTESIAN_POINT ('', (-13.655, -0.750000000000001, -1.55431223447522E-14));
#910 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#890, #900), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#920 = EDGE_CURVE ('', #880, #810, #910, .T.);
#930 = ORIENTED_EDGE ('', *, *, #920, .F.);
#940 = CARTESIAN_POINT ('', (-13.005, -0.749999999999998, -4.27059232631023));
#950 = VERTEX_POINT ('', #940);
#960 = CARTESIAN_POINT ('', (-13.005, -0.749999999999998, -4.27059232631023));
#970 = CARTESIAN_POINT ('', (-13.005, -0.750000000000001, -1.82076576038526E-14));
#980 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#960, #970), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#990 = EDGE_CURVE ('', #950, #880, #980, .T.);
#1000 = ORIENTED_EDGE ('', *, *, #990, .F.);
#1010 = CARTESIAN_POINT ('', (-15.355, -0.75, -1.92059232631025));
#1020 = VERTEX_POINT ('', #1010);
#1030 = CARTESIAN_POINT ('', (-15.355, -0.75, -1.92059232631025));
#1040 = CARTESIAN_POINT ('', (-13.005, -0.749999999999998, -4.27059232631023));
#1050 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1030, #1040), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1060 = EDGE_CURVE ('', #1020, #950, #1050, .T.);
#1070 = ORIENTED_EDGE ('', *, *, #1060, .F.);
#1080 = CARTESIAN_POINT ('', (-15.355, -0.75, -4.79870943090326));
#1090 = CARTESIAN_POINT ('', (-15.355, -0.75, -1.92059232631025));
#1100 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1080, #1090), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1110 = EDGE_CURVE ('', #180, #1020, #1100, .T.);
#1120 = ORIENTED_EDGE ('', *, *, #1110, .F.);
#1130 = EDGE_LOOP ('', (#370, #440, #510, #580, #650, #720, #790, #860, #930, #1000, #1070, #1120));
#1140 = FACE_OUTER_BOUND ('', #1130, .T.);
#1150 = CARTESIAN_POINT ('', (-15.356, -0.75, -4.79970943090326));
#1160 = CARTESIAN_POINT ('', (-15.356, -0.750000000000001, 0.482290569096736));
#1170 = CARTESIAN_POINT ('', (-0.653999999999996, -0.749999999999999, -4.79970943090326));
#1180 = CARTESIAN_POINT ('', (-0.653999999999996, -0.75, 0.482290569096736));
#1190 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1150, #1160), (#1170, #1180)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-15.351, -0.648999999999999), (0.0662873602670606, 5.34828736026706), .UNSPECIFIED.);
#1200 = ADVANCED_FACE ('', (#1140), #1190, .T.);
#1210 = CARTESIAN_POINT ('', (-2.83629056909676, 0.75, 0.481290569096736));
#1220 = VERTEX_POINT ('', #1210);
#1230 = CARTESIAN_POINT ('', (-13.1737094309032, 0.749999999999999, 0.481290569096736));
#1240 = VERTEX_POINT ('', #1230);
#1250 = CARTESIAN_POINT ('', (-2.83629056909676, 0.75, 0.481290569096736));
#1260 = CARTESIAN_POINT ('', (-13.1737094309032, 0.749999999999999, 0.481290569096736));
#1270 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1250, #1260), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1280 = EDGE_CURVE ('', #1220, #1240, #1270, .T.);
#1290 = ORIENTED_EDGE ('', *, *, #1280, .F.);
#1300 = CARTESIAN_POINT ('', (-2.355, 0.75, -1.33226762955019E-14));
#1310 = VERTEX_POINT ('', #1300);
#1320 = CARTESIAN_POINT ('', (-2.83629056909676, 0.75, 0.481290569096736));
#1330 = CARTESIAN_POINT ('', (-2.355, 0.75, -1.33226762955019E-14));
#1340 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1320, #1330), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1350 = EDGE_CURVE ('', #1220, #1310, #1340, .T.);
#1360 = ORIENTED_EDGE ('', *, *, #1350, .T.);
#1370 = CARTESIAN_POINT ('', (-3.005, 0.75, -1.82076576038526E-14));
#1380 = VERTEX_POINT ('', #1370);
#1390 = CARTESIAN_POINT ('', (-3.005, 0.75, -1.82076576038526E-14));
#1400 = CARTESIAN_POINT ('', (-2.355, 0.75, -1.33226762955019E-14));
#1410 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1390, #1400), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1420 = EDGE_CURVE ('', #1380, #1310, #1410, .T.);
#1430 = ORIENTED_EDGE ('', *, *, #1420, .F.);
#1440 = CARTESIAN_POINT ('', (-3.005, 0.749999999999998, -4.27059232631023));
#1450 = VERTEX_POINT ('', #1440);
#1460 = CARTESIAN_POINT ('', (-3.005, 0.749999999999998, -4.27059232631023));
#1470 = CARTESIAN_POINT ('', (-3.005, 0.75, -1.82076576038526E-14));
#1480 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1460, #1470), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1490 = EDGE_CURVE ('', #1450, #1380, #1480, .T.);
#1500 = ORIENTED_EDGE ('', *, *, #1490, .F.);
#1510 = CARTESIAN_POINT ('', (-0.654999999999996, 0.750000000000001, -1.92059232631025));
#1520 = VERTEX_POINT ('', #1510);
#1530 = CARTESIAN_POINT ('', (-0.654999999999996, 0.750000000000001, -1.92059232631025));
#1540 = CARTESIAN_POINT ('', (-3.005, 0.749999999999998, -4.27059232631023));
#1550 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1530, #1540), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1560 = EDGE_CURVE ('', #1520, #1450, #1550, .T.);
#1570 = ORIENTED_EDGE ('', *, *, #1560, .F.);
#1580 = CARTESIAN_POINT ('', (-0.654999999999998, 0.750000000000001, -4.79870943090326));
#1590 = CARTESIAN_POINT ('', (-0.654999999999996, 0.750000000000001, -1.92059232631025));
#1600 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1580, #1590), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1610 = EDGE_CURVE ('', #40, #1520, #1600, .T.);
#1620 = ORIENTED_EDGE ('', *, *, #1610, .F.);
#1630 = ORIENTED_EDGE ('', *, *, #80, .F.);
#1640 = CARTESIAN_POINT ('', (-15.355, 0.75, -1.92059232631025));
#1650 = VERTEX_POINT ('', #1640);
#1660 = CARTESIAN_POINT ('', (-15.355, 0.75, -4.79870943090326));
#1670 = CARTESIAN_POINT ('', (-15.355, 0.75, -1.92059232631025));
#1680 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1660, #1670), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1690 = EDGE_CURVE ('', #20, #1650, #1680, .T.);
#1700 = ORIENTED_EDGE ('', *, *, #1690, .T.);
#1710 = CARTESIAN_POINT ('', (-13.005, 0.749999999999998, -4.27059232631023));
#1720 = VERTEX_POINT ('', #1710);
#1730 = CARTESIAN_POINT ('', (-15.355, 0.75, -1.92059232631025));
#1740 = CARTESIAN_POINT ('', (-13.005, 0.749999999999998, -4.27059232631023));
#1750 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1730, #1740), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1760 = EDGE_CURVE ('', #1650, #1720, #1750, .T.);
#1770 = ORIENTED_EDGE ('', *, *, #1760, .T.);
#1780 = CARTESIAN_POINT ('', (-13.005, 0.749999999999999, -1.82076576038526E-14));
#1790 = VERTEX_POINT ('', #1780);
#1800 = CARTESIAN_POINT ('', (-13.005, 0.749999999999998, -4.27059232631023));
#1810 = CARTESIAN_POINT ('', (-13.005, 0.749999999999999, -1.82076576038526E-14));
#1820 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1800, #1810), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1830 = EDGE_CURVE ('', #1720, #1790, #1820, .T.);
#1840 = ORIENTED_EDGE ('', *, *, #1830, .T.);
#1850 = CARTESIAN_POINT ('', (-13.655, 0.749999999999999, -1.33226762955019E-14));
#1860 = VERTEX_POINT ('', #1850);
#1870 = CARTESIAN_POINT ('', (-13.005, 0.749999999999999, -1.82076576038526E-14));
#1880 = CARTESIAN_POINT ('', (-13.655, 0.749999999999999, -1.33226762955019E-14));
#1890 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1870, #1880), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1900 = EDGE_CURVE ('', #1790, #1860, #1890, .T.);
#1910 = ORIENTED_EDGE ('', *, *, #1900, .T.);
#1920 = CARTESIAN_POINT ('', (-13.1737094309032, 0.749999999999999, 0.481290569096736));
#1930 = CARTESIAN_POINT ('', (-13.655, 0.749999999999999, -1.33226762955019E-14));
#1940 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1920, #1930), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1950 = EDGE_CURVE ('', #1240, #1860, #1940, .T.);
#1960 = ORIENTED_EDGE ('', *, *, #1950, .F.);
#1970 = EDGE_LOOP ('', (#1290, #1360, #1430, #1500, #1570, #1620, #1630, #1700, #1770, #1840, #1910, #1960));
#1980 = FACE_OUTER_BOUND ('', #1970, .T.);
#1990 = CARTESIAN_POINT ('', (-0.653999999999996, 0.750000000000001, -4.79970943090326));
#2000 = CARTESIAN_POINT ('', (-0.653999999999996, 0.75, 0.482290569096736));
#2010 = CARTESIAN_POINT ('', (-15.356, 0.75, -4.79970943090326));
#2020 = CARTESIAN_POINT ('', (-15.356, 0.749999999999999, 0.482290569096736));
#2030 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1990, #2000), (#2010, #2020)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.648999999999996, 15.351), (0.0662873602670606, 5.34828736026706), .UNSPECIFIED.);
#2040 = ADVANCED_FACE ('', (#1980), #2030, .T.);
#2050 = ORIENTED_EDGE ('', *, *, #850, .T.);
#2060 = CARTESIAN_POINT ('', (-13.1737094309032, -0.750000000000001, 0.481290569096736));
#2070 = CARTESIAN_POINT ('', (-13.1737094309032, 0.749999999999999, 0.481290569096736));
#2080 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2060, #2070), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2090 = EDGE_CURVE ('', #740, #1240, #2080, .T.);
#2100 = ORIENTED_EDGE ('', *, *, #2090, .T.);
#2110 = ORIENTED_EDGE ('', *, *, #1950, .T.);
#2120 = CARTESIAN_POINT ('', (-13.655, 0.749999999999999, -1.33226762955019E-14));
#2130 = CARTESIAN_POINT ('', (-13.655, -0.750000000000001, -1.55431223447522E-14));
#2140 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2120, #2130), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2150 = EDGE_CURVE ('', #1860, #810, #2140, .T.);
#2160 = ORIENTED_EDGE ('', *, *, #2150, .T.);
#2170 = EDGE_LOOP ('', (#2050, #2100, #2110, #2160));
#2180 = FACE_OUTER_BOUND ('', #2170, .T.);
#2190 = CARTESIAN_POINT ('', (-13.1727094309032, 0.750999999999999, 0.482290569096737));
#2200 = CARTESIAN_POINT ('', (-13.1727094309032, -0.751, 0.482290569096737));
#2210 = CARTESIAN_POINT ('', (-13.656, 0.750999999999999, -0.00100000000001543));
#2220 = CARTESIAN_POINT ('', (-13.656, -0.751, -0.00100000000001543));
#2230 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2190, #2200), (#2210, #2220)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00141421356237315, 0.682061863821269), (2.98655064097649, 4.48855064097649), .UNSPECIFIED.);
#2240 = ADVANCED_FACE ('', (#2180), #2230, .T.);
#2250 = CARTESIAN_POINT ('', (-15.7846475650382, 0.981637297086517, 1.33226762955019E-15));
#2260 = VERTEX_POINT ('', #2250);
#2270 = CARTESIAN_POINT ('', (-15.7846475650382, 0.981637297086517, 1.33226762955019E-15));
#2280 = CARTESIAN_POINT ('', (-13.005, 0.749999999999999, -1.82076576038526E-14));
#2290 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2270, #2280), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2300 = EDGE_CURVE ('', #2260, #1790, #2290, .T.);
#2310 = ORIENTED_EDGE ('', *, *, #2300, .F.);
#2320 = CARTESIAN_POINT ('', (-16.005, 0.782946303962666, 4.44089209850063E-16));
#2330 = VERTEX_POINT ('', #2320);
#2340 = CARTESIAN_POINT ('', (-15.7846475650382, 0.981637297086517, 1.33226762955019E-15));
#2350 = CARTESIAN_POINT ('', (-15.9114458002247, 0.992203816685388, 0.));
#2360 = CARTESIAN_POINT ('', (-16.005, 0.907846333331546, 4.44089209850063E-16));
#2370 = CARTESIAN_POINT ('', (-16.005, 0.782946303962666, 4.44089209850063E-16));
#2380 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#2340, #2350, #2360, #2370), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (4.7123889803847, 6.36479556808525), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.785115065174205, 0.785115065174205, 1.))
   REPRESENTATION_ITEM ('')
);
#2390 = EDGE_CURVE ('', #2260, #2330, #2380, .T.);
#2400 = ORIENTED_EDGE ('', *, *, #2390, .T.);
#2410 = CARTESIAN_POINT ('', (-16.005, -0.782946303962668, 4.44089209850063E-16));
#2420 = VERTEX_POINT ('', #2410);
#2430 = CARTESIAN_POINT ('', (-16.005, 0.782946303962666, 4.44089209850063E-16));
#2440 = CARTESIAN_POINT ('', (-16.005, -0.782946303962668, 4.44089209850063E-16));
#2450 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2430, #2440), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2460 = EDGE_CURVE ('', #2330, #2420, #2450, .T.);
#2470 = ORIENTED_EDGE ('', *, *, #2460, .T.);
#2480 = CARTESIAN_POINT ('', (-15.7846475650382, -0.981637297086518, 1.33226762955019E-15));
#2490 = VERTEX_POINT ('', #2480);
#2500 = CARTESIAN_POINT ('', (-16.005, -0.782946303962668, 4.44089209850063E-16));
#2510 = CARTESIAN_POINT ('', (-16.005, -0.907846333331547, 4.44089209850063E-16));
#2520 = CARTESIAN_POINT ('', (-15.9114458002247, -0.992203816685389, 0.));
#2530 = CARTESIAN_POINT ('', (-15.7846475650382, -0.981637297086518, 1.33226762955019E-15));
#2540 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#2500, #2510, #2520, #2530), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (6.20157504627392, 7.85398163397448), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.785115065174205, 0.785115065174205, 1.))
   REPRESENTATION_ITEM ('')
);
#2550 = EDGE_CURVE ('', #2420, #2490, #2540, .T.);
#2560 = ORIENTED_EDGE ('', *, *, #2550, .T.);
#2570 = CARTESIAN_POINT ('', (-15.7846475650382, -0.981637297086518, 1.33226762955019E-15));
#2580 = CARTESIAN_POINT ('', (-13.005, -0.750000000000001, -1.82076576038526E-14));
#2590 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2570, #2580), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2600 = EDGE_CURVE ('', #2490, #880, #2590, .T.);
#2610 = ORIENTED_EDGE ('', *, *, #2600, .T.);
#2620 = ORIENTED_EDGE ('', *, *, #920, .T.);
#2630 = ORIENTED_EDGE ('', *, *, #2150, .F.);
#2640 = ORIENTED_EDGE ('', *, *, #1900, .F.);
#2650 = EDGE_LOOP ('', (#2310, #2400, #2470, #2560, #2610, #2620, #2630, #2640));
#2660 = FACE_OUTER_BOUND ('', #2650, .T.);
#2670 = CARTESIAN_POINT ('', (-13.004, 0.992203816685388, -2.04281036531029E-14));
#2680 = CARTESIAN_POINT ('', (-13.004, -0.992203816685388, -2.04281036531029E-14));
#2690 = CARTESIAN_POINT ('', (-16.006, 0.992203816685388, 4.44089209850063E-16));
#2700 = CARTESIAN_POINT ('', (-16.006, -0.992203816685388, 4.44089209850063E-16));
#2710 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2670, #2680), (#2690, #2700)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00100000000000033, 3.001), (2.7453468242911, 4.72975445766188), .UNSPECIFIED.);
#2720 = ADVANCED_FACE ('', (#2660), #2710, .T.);
#2730 = CARTESIAN_POINT ('', (-15.6984308682154, 0.757398876313951, -1.57716145809481));
#2740 = VERTEX_POINT ('', #2730);
#2750 = CARTESIAN_POINT ('', (-15.6984308682154, -0.757398876313952, -1.57716145809481));
#2760 = VERTEX_POINT ('', #2750);
#2770 = CARTESIAN_POINT ('', (-15.6984308682154, 0.757398876313951, -1.57716145809481));
#2780 = CARTESIAN_POINT ('', (-15.6984308682154, -0.757398876313952, -1.57716145809481));
#2790 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2770, #2780), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2800 = EDGE_CURVE ('', #2740, #2760, #2790, .T.);
#2810 = ORIENTED_EDGE ('', *, *, #2800, .F.);
#2820 = CARTESIAN_POINT ('', (-15.424911691039, 0.951659307586582, -1.85068063527125));
#2830 = VERTEX_POINT ('', #2820);
#2840 = CARTESIAN_POINT ('', (-15.6984308682154, 0.757398876313951, -1.57716145809481));
#2850 = CARTESIAN_POINT ('', (-15.6984308682155, 0.882298905682832, -1.57716145809481));
#2860 = CARTESIAN_POINT ('', (-15.5823038658141, 0.964775322151174, -1.69328846049615));
#2870 = CARTESIAN_POINT ('', (-15.424911691039, 0.951659307586582, -1.85068063527125));
#2880 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#2840, #2850, #2860, #2870), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (6.27246188278314, 7.92486847048372), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.785115065174201, 0.785115065174201, 1.))
   REPRESENTATION_ITEM ('')
);
#2890 = EDGE_CURVE ('', #2740, #2830, #2880, .T.);
#2900 = ORIENTED_EDGE ('', *, *, #2890, .T.);
#2910 = CARTESIAN_POINT ('', (-13.005, 0.749999999999998, -4.27059232631023));
#2920 = CARTESIAN_POINT ('', (-15.424911691039, 0.951659307586582, -1.85068063527125));
#2930 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2910, #2920), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2940 = EDGE_CURVE ('', #1720, #2830, #2930, .T.);
#2950 = ORIENTED_EDGE ('', *, *, #2940, .F.);
#2960 = ORIENTED_EDGE ('', *, *, #1760, .F.);
#2970 = CARTESIAN_POINT ('', (-15.355, 0.75, -1.92059232631025));
#2980 = CARTESIAN_POINT ('', (-15.355, -0.75, -1.92059232631025));
#2990 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2970, #2980), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3000 = EDGE_CURVE ('', #1650, #1020, #2990, .T.);
#3010 = ORIENTED_EDGE ('', *, *, #3000, .T.);
#3020 = ORIENTED_EDGE ('', *, *, #1060, .T.);
#3030 = CARTESIAN_POINT ('', (-15.424911691039, -0.951659307586583, -1.85068063527125));
#3040 = VERTEX_POINT ('', #3030);
#3050 = CARTESIAN_POINT ('', (-13.005, -0.749999999999998, -4.27059232631023));
#3060 = CARTESIAN_POINT ('', (-15.424911691039, -0.951659307586583, -1.85068063527125));
#3070 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3050, #3060), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3080 = EDGE_CURVE ('', #950, #3040, #3070, .T.);
#3090 = ORIENTED_EDGE ('', *, *, #3080, .T.);
#3100 = CARTESIAN_POINT ('', (-15.424911691039, -0.951659307586583, -1.85068063527125));
#3110 = CARTESIAN_POINT ('', (-15.5823038658141, -0.964775322151175, -1.69328846049615));
#3120 = CARTESIAN_POINT ('', (-15.6984308682155, -0.882298905682833, -1.57716145809481));
#3130 = CARTESIAN_POINT ('', (-15.6984308682154, -0.757398876313952, -1.57716145809481));
#3140 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#3100, #3110, #3120, #3130), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (4.64150214387546, 6.29390873157603), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.785115065174201, 0.785115065174201, 1.))
   REPRESENTATION_ITEM ('')
);
#3150 = EDGE_CURVE ('', #3040, #2760, #3140, .T.);
#3160 = ORIENTED_EDGE ('', *, *, #3150, .T.);
#3170 = EDGE_LOOP ('', (#2810, #2900, #2950, #2960, #3010, #3020, #3090, #3160));
#3180 = FACE_OUTER_BOUND ('', #3170, .T.);
#3190 = CARTESIAN_POINT ('', (-15.6994308682154, 0.964775322151176, -1.57616145809481));
#3200 = CARTESIAN_POINT ('', (-15.6994308682154, -0.964775322151177, -1.57616145809481));
#3210 = CARTESIAN_POINT ('', (-13.004, 0.964775322151176, -4.27159232631023));
#3220 = CARTESIAN_POINT ('', (-13.004, -0.964775322151176, -4.27159232631023));
#3230 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3190, #3200), (#3210, #3220)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-3.32481608513913, 0.487098805130222), (33.2852246778488, 35.2147753221512), .UNSPECIFIED.);
#3240 = ADVANCED_FACE ('', (#3180), #3230, .T.);
#3250 = ORIENTED_EDGE ('', *, *, #1690, .F.);
#3260 = ORIENTED_EDGE ('', *, *, #270, .T.);
#3270 = ORIENTED_EDGE ('', *, *, #1110, .T.);
#3280 = ORIENTED_EDGE ('', *, *, #3000, .F.);
#3290 = EDGE_LOOP ('', (#3250, #3260, #3270, #3280));
#3300 = FACE_OUTER_BOUND ('', #3290, .T.);
#3310 = CARTESIAN_POINT ('', (-15.355, 0.750999999999998, -4.79970943090326));
#3320 = CARTESIAN_POINT ('', (-15.355, 0.750999999999997, -1.91959232631025));
#3330 = CARTESIAN_POINT ('', (-15.355, -0.750999999999998, -4.79970943090326));
#3340 = CARTESIAN_POINT ('', (-15.355, -0.750999999999998, -1.91959232631025));
#3350 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3310, #3320), (#3330, #3340)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-35.001, -33.499), (0.120882895406992, 3.001), .UNSPECIFIED.);
#3360 = ADVANCED_FACE ('', (#3300), #3350, .T.);
#3370 = ORIENTED_EDGE ('', *, *, #2460, .F.);
#3380 = CARTESIAN_POINT ('', (-16.005, 0.782946303962666, 4.44089209850063E-16));
#3390 = CARTESIAN_POINT ('', (-15.6984308682154, 0.757398876313951, -1.57716145809481));
#3400 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3380, #3390), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3410 = EDGE_CURVE ('', #2330, #2740, #3400, .T.);
#3420 = ORIENTED_EDGE ('', *, *, #3410, .T.);
#3430 = ORIENTED_EDGE ('', *, *, #2800, .T.);
#3440 = CARTESIAN_POINT ('', (-15.6984308682154, -0.757398876313952, -1.57716145809481));
#3450 = CARTESIAN_POINT ('', (-16.005, -0.782946303962668, 4.44089209850063E-16));
#3460 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3440, #3450), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3470 = EDGE_CURVE ('', #2760, #2420, #3460, .T.);
#3480 = ORIENTED_EDGE ('', *, *, #3470, .T.);
#3490 = EDGE_LOOP ('', (#3370, #3420, #3430, #3480));
#3500 = FACE_OUTER_BOUND ('', #3490, .T.);
#3510 = CARTESIAN_POINT ('', (-16.0052237113694, 0.783946303962664, 0.00115089522399225));
#3520 = CARTESIAN_POINT ('', (-16.0052237113694, -0.783946303962666, 0.00115089522399225));
#3530 = CARTESIAN_POINT ('', (-15.698207156846, 0.783946303962665, -1.5783123533188));
#3540 = CARTESIAN_POINT ('', (-15.698207156846, -0.783946303962666, -1.5783123533188));
#3550 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3510, #3520), (#3530, #3540)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1.60785314417992, 0.00117243617882457), (33.4660536960373, 35.0339463039627), .UNSPECIFIED.);
#3560 = ADVANCED_FACE ('', (#3500), #3550, .T.);
#3570 = ORIENTED_EDGE ('', *, *, #2600, .F.);
#3580 = CARTESIAN_POINT ('', (-15.7846475650382, -0.981637297086518, 1.33226762955019E-15));
#3590 = CARTESIAN_POINT ('', (-15.424911691039, -0.951659307586583, -1.85068063527125));
#3600 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3580, #3590), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3610 = EDGE_CURVE ('', #2490, #3040, #3600, .T.);
#3620 = ORIENTED_EDGE ('', *, *, #3610, .T.);
#3630 = ORIENTED_EDGE ('', *, *, #3080, .F.);
#3640 = ORIENTED_EDGE ('', *, *, #990, .T.);
#3650 = EDGE_LOOP ('', (#3570, #3620, #3630, #3640));
#3660 = FACE_OUTER_BOUND ('', #3650, .T.);
#3670 = CARTESIAN_POINT ('', (-15.7857234271072, -0.981726952258929, -4.27159232631023));
#3680 = CARTESIAN_POINT ('', (-15.7857234271072, -0.981726952258932, 0.00100000000000033));
#3690 = CARTESIAN_POINT ('', (-13.003924137931, -0.749910344827584, -4.27159232631023));
#3700 = CARTESIAN_POINT ('', (-13.003924137931, -0.749910344827587, 0.00100000000000033));
#3710 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3670, #3680), (#3690, #3700)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.220036632616912, 3.01147823593622), (2.1328726180898, 6.40546494440002), .UNSPECIFIED.);
#3720 = ADVANCED_FACE ('', (#3660), #3710, .T.);
#3730 = ORIENTED_EDGE ('', *, *, #2940, .T.);
#3740 = CARTESIAN_POINT ('', (-15.424911691039, 0.951659307586582, -1.85068063527125));
#3750 = CARTESIAN_POINT ('', (-15.7846475650382, 0.981637297086517, 1.33226762955019E-15));
#3760 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3740, #3750), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3770 = EDGE_CURVE ('', #2830, #2260, #3760, .T.);
#3780 = ORIENTED_EDGE ('', *, *, #3770, .T.);
#3790 = ORIENTED_EDGE ('', *, *, #2300, .T.);
#3800 = ORIENTED_EDGE ('', *, *, #1830, .F.);
#3810 = EDGE_LOOP ('', (#3730, #3780, #3790, #3800));
#3820 = FACE_OUTER_BOUND ('', #3810, .T.);
#3830 = CARTESIAN_POINT ('', (-13.003924137931, 0.749910344827584, -4.27159232631023));
#3840 = CARTESIAN_POINT ('', (-13.003924137931, 0.749910344827585, 0.00100000000000033));
#3850 = CARTESIAN_POINT ('', (-15.7857234271072, 0.981726952258929, -4.27159232631023));
#3860 = CARTESIAN_POINT ('', (-15.7857234271072, 0.98172695225893, 0.00100000000000033));
#3870 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3830, #3840), (#3850, #3860)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.220036632616912, 3.01147823593622), (2.1328726180898, 6.40546494440002), .UNSPECIFIED.);
#3880 = ADVANCED_FACE ('', (#3820), #3870, .T.);
#3890 = ORIENTED_EDGE ('', *, *, #780, .F.);
#3900 = CARTESIAN_POINT ('', (-2.83629056909676, -0.75, 0.481290569096736));
#3910 = CARTESIAN_POINT ('', (-2.83629056909676, 0.75, 0.481290569096736));
#3920 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3900, #3910), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3930 = EDGE_CURVE ('', #670, #1220, #3920, .T.);
#3940 = ORIENTED_EDGE ('', *, *, #3930, .T.);
#3950 = ORIENTED_EDGE ('', *, *, #1280, .T.);
#3960 = ORIENTED_EDGE ('', *, *, #2090, .F.);
#3970 = EDGE_LOOP ('', (#3890, #3940, #3950, #3960));
#3980 = FACE_OUTER_BOUND ('', #3970, .T.);
#3990 = CARTESIAN_POINT ('', (-2.83529056909676, 0.750999999999999, 0.481290569096736));
#4000 = CARTESIAN_POINT ('', (-2.83529056909676, -0.750999999999999, 0.481290569096736));
#4010 = CARTESIAN_POINT ('', (-13.1747094309032, 0.750999999999999, 0.481290569096736));
#4020 = CARTESIAN_POINT ('', (-13.1747094309032, -0.751, 0.481290569096736));
#4030 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3990, #4000), (#4010, #4020)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-3.19537276977298, 7.14404609203351), (-10.001, -8.499), .UNSPECIFIED.);
#4040 = ADVANCED_FACE ('', (#3980), #4030, .T.);
#4050 = ORIENTED_EDGE ('', *, *, #710, .F.);
#4060 = CARTESIAN_POINT ('', (-2.355, 0.75, -1.33226762955019E-14));
#4070 = CARTESIAN_POINT ('', (-2.355, -0.75, -1.55431223447522E-14));
#4080 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4060, #4070), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4090 = EDGE_CURVE ('', #1310, #600, #4080, .T.);
#4100 = ORIENTED_EDGE ('', *, *, #4090, .F.);
#4110 = ORIENTED_EDGE ('', *, *, #1350, .F.);
#4120 = ORIENTED_EDGE ('', *, *, #3930, .F.);
#4130 = EDGE_LOOP ('', (#4050, #4100, #4110, #4120));
#4140 = FACE_OUTER_BOUND ('', #4130, .T.);
#4150 = CARTESIAN_POINT ('', (-2.83729056909676, -0.751, 0.482290569096736));
#4160 = CARTESIAN_POINT ('', (-2.83729056909676, 0.750999999999999, 0.482290569096736));
#4170 = CARTESIAN_POINT ('', (-2.354, -0.751, -0.00100000000001543));
#4180 = CARTESIAN_POINT ('', (-2.354, 0.750999999999999, -0.00100000000001543));
#4190 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4150, #4160), (#4170, #4180)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00141421356237315, 0.682061863821268), (-4.48855064097649, -2.98655064097649), .UNSPECIFIED.);
#4200 = ADVANCED_FACE ('', (#4140), #4190, .T.);
#4210 = CARTESIAN_POINT ('', (-0.00499999999999901, 0.782946303962662, 4.44089209850063E-16));
#4220 = VERTEX_POINT ('', #4210);
#4230 = CARTESIAN_POINT ('', (-0.00499999999999901, -0.782946303962673, 4.44089209850063E-16));
#4240 = VERTEX_POINT ('', #4230);
#4250 = CARTESIAN_POINT ('', (-0.00499999999999901, 0.782946303962662, 4.44089209850063E-16));
#4260 = CARTESIAN_POINT ('', (-0.00499999999999901, -0.782946303962673, 4.44089209850063E-16));
#4270 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4250, #4260), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4280 = EDGE_CURVE ('', #4220, #4240, #4270, .T.);
#4290 = ORIENTED_EDGE ('', *, *, #4280, .F.);
#4300 = CARTESIAN_POINT ('', (-0.22535243496179, 0.981637297086517, 1.33226762955019E-15));
#4310 = VERTEX_POINT ('', #4300);
#4320 = CARTESIAN_POINT ('', (-0.00499999999999901, 0.782946303962662, 4.44089209850063E-16));
#4330 = CARTESIAN_POINT ('', (-0.00499999999999723, 0.907846333331542, 8.88178419700125E-16));
#4340 = CARTESIAN_POINT ('', (-0.0985541997753305, 0.992203816685385, 0.));
#4350 = CARTESIAN_POINT ('', (-0.22535243496179, 0.981637297086517, 1.33226762955019E-15));
#4360 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#4320, #4330, #4340, #4350), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (6.20157504627392, 7.85398163397448), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.785115065174204, 0.785115065174204, 1.))
   REPRESENTATION_ITEM ('')
);
#4370 = EDGE_CURVE ('', #4220, #4310, #4360, .T.);
#4380 = ORIENTED_EDGE ('', *, *, #4370, .T.);
#4390 = CARTESIAN_POINT ('', (-0.22535243496179, 0.981637297086517, 1.33226762955019E-15));
#4400 = CARTESIAN_POINT ('', (-3.005, 0.75, -1.82076576038526E-14));
#4410 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4390, #4400), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4420 = EDGE_CURVE ('', #4310, #1380, #4410, .T.);
#4430 = ORIENTED_EDGE ('', *, *, #4420, .T.);
#4440 = ORIENTED_EDGE ('', *, *, #1420, .T.);
#4450 = ORIENTED_EDGE ('', *, *, #4090, .T.);
#4460 = ORIENTED_EDGE ('', *, *, #640, .F.);
#4470 = CARTESIAN_POINT ('', (-0.22535243496179, -0.981637297086517, 1.33226762955019E-15));
#4480 = VERTEX_POINT ('', #4470);
#4490 = CARTESIAN_POINT ('', (-0.22535243496179, -0.981637297086517, 1.33226762955019E-15));
#4500 = CARTESIAN_POINT ('', (-3.005, -0.75, -1.82076576038526E-14));
#4510 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4490, #4500), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4520 = EDGE_CURVE ('', #4480, #530, #4510, .T.);
#4530 = ORIENTED_EDGE ('', *, *, #4520, .F.);
#4540 = CARTESIAN_POINT ('', (-0.22535243496179, -0.981637297086517, 1.33226762955019E-15));
#4550 = CARTESIAN_POINT ('', (-0.0985541997753305, -0.992203816685395, 0.));
#4560 = CARTESIAN_POINT ('', (-0.00499999999999901, -0.907846333331553, 4.44089209850063E-16));
#4570 = CARTESIAN_POINT ('', (-0.00499999999999901, -0.782946303962673, 4.44089209850063E-16));
#4580 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#4540, #4550, #4560, #4570), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (4.71238898038469, 6.36479556808526), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.785115065174204, 0.785115065174204, 1.))
   REPRESENTATION_ITEM ('')
);
#4590 = EDGE_CURVE ('', #4480, #4240, #4580, .T.);
#4600 = ORIENTED_EDGE ('', *, *, #4590, .T.);
#4610 = EDGE_LOOP ('', (#4290, #4380, #4430, #4440, #4450, #4460, #4530, #4600));
#4620 = FACE_OUTER_BOUND ('', #4610, .T.);
#4630 = CARTESIAN_POINT ('', (-3.006, -0.992203816685395, -1.99840144432528E-14));
#4640 = CARTESIAN_POINT ('', (-3.006, 0.992203816685384, -1.99840144432528E-14));
#4650 = CARTESIAN_POINT ('', (-0.00399999999999956, -0.992203816685395, 4.44089209850063E-16));
#4660 = CARTESIAN_POINT ('', (-0.00399999999999956, 0.992203816685384, 4.44089209850063E-16));
#4670 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4630, #4640), (#4650, #4660)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.000999999999999446, 3.001), (-4.72975445766189, -2.74534682429111), .UNSPECIFIED.);
#4680 = ADVANCED_FACE ('', (#4620), #4670, .T.);
#4690 = CARTESIAN_POINT ('', (-0.585088308960991, 0.951659307586583, -1.85068063527125));
#4700 = VERTEX_POINT ('', #4690);
#4710 = CARTESIAN_POINT ('', (-3.005, 0.749999999999998, -4.27059232631023));
#4720 = CARTESIAN_POINT ('', (-0.585088308960991, 0.951659307586583, -1.85068063527125));
#4730 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4710, #4720), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4740 = EDGE_CURVE ('', #1450, #4700, #4730, .T.);
#4750 = ORIENTED_EDGE ('', *, *, #4740, .T.);
#4760 = CARTESIAN_POINT ('', (-0.311569131784553, 0.757398876313952, -1.57716145809481));
#4770 = VERTEX_POINT ('', #4760);
#4780 = CARTESIAN_POINT ('', (-0.585088308960991, 0.951659307586583, -1.85068063527125));
#4790 = CARTESIAN_POINT ('', (-0.427696134185893, 0.96477532215117, -1.69328846049615));
#4800 = CARTESIAN_POINT ('', (-0.311569131784553, 0.88229890568283, -1.57716145809481));
#4810 = CARTESIAN_POINT ('', (-0.311569131784553, 0.757398876313952, -1.57716145809481));
#4820 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#4780, #4790, #4800, #4810), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (4.64150214387546, 6.29390873157601), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.785115065174207, 0.785115065174207, 1.))
   REPRESENTATION_ITEM ('')
);
#4830 = EDGE_CURVE ('', #4700, #4770, #4820, .T.);
#4840 = ORIENTED_EDGE ('', *, *, #4830, .T.);
#4850 = CARTESIAN_POINT ('', (-0.311569131784553, -0.757398876313958, -1.57716145809481));
#4860 = VERTEX_POINT ('', #4850);
#4870 = CARTESIAN_POINT ('', (-0.311569131784553, 0.757398876313952, -1.57716145809481));
#4880 = CARTESIAN_POINT ('', (-0.311569131784553, -0.757398876313958, -1.57716145809481));
#4890 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4870, #4880), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4900 = EDGE_CURVE ('', #4770, #4860, #4890, .T.);
#4910 = ORIENTED_EDGE ('', *, *, #4900, .T.);
#4920 = CARTESIAN_POINT ('', (-0.585088308960991, -0.951659307586582, -1.85068063527125));
#4930 = VERTEX_POINT ('', #4920);
#4940 = CARTESIAN_POINT ('', (-0.311569131784553, -0.757398876313958, -1.57716145809481));
#4950 = CARTESIAN_POINT ('', (-0.311569131784552, -0.882298905682839, -1.57716145809481));
#4960 = CARTESIAN_POINT ('', (-0.427696134185891, -0.964775322151181, -1.69328846049615));
#4970 = CARTESIAN_POINT ('', (-0.585088308960991, -0.951659307586582, -1.85068063527125));
#4980 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#4940, #4950, #4960, #4970), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (6.27246188278314, 7.92486847048372), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.785115065174201, 0.785115065174201, 1.))
   REPRESENTATION_ITEM ('')
);
#4990 = EDGE_CURVE ('', #4860, #4930, #4980, .T.);
#5000 = ORIENTED_EDGE ('', *, *, #4990, .T.);
#5010 = CARTESIAN_POINT ('', (-3.005, -0.749999999999997, -4.27059232631023));
#5020 = CARTESIAN_POINT ('', (-0.585088308960991, -0.951659307586582, -1.85068063527125));
#5030 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5010, #5020), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5040 = EDGE_CURVE ('', #460, #4930, #5030, .T.);
#5050 = ORIENTED_EDGE ('', *, *, #5040, .F.);
#5060 = ORIENTED_EDGE ('', *, *, #500, .F.);
#5070 = CARTESIAN_POINT ('', (-0.654999999999996, 0.750000000000001, -1.92059232631025));
#5080 = CARTESIAN_POINT ('', (-0.654999999999998, -0.75, -1.92059232631025));
#5090 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5070, #5080), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5100 = EDGE_CURVE ('', #1520, #390, #5090, .T.);
#5110 = ORIENTED_EDGE ('', *, *, #5100, .F.);
#5120 = ORIENTED_EDGE ('', *, *, #1560, .T.);
#5130 = EDGE_LOOP ('', (#4750, #4840, #4910, #5000, #5050, #5060, #5110, #5120));
#5140 = FACE_OUTER_BOUND ('', #5130, .T.);
#5150 = CARTESIAN_POINT ('', (-0.310569131784554, -0.964775322151183, -1.57616145809481));
#5160 = CARTESIAN_POINT ('', (-0.310569131784554, 0.96477532215117, -1.57616145809481));
#5170 = CARTESIAN_POINT ('', (-3.006, -0.964775322151183, -4.27159232631023));
#5180 = CARTESIAN_POINT ('', (-3.006, 0.96477532215117, -4.27159232631023));
#5190 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5150, #5160), (#5170, #5180)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-3.32481608513913, 0.487098805130221), (-35.2147753221512, -33.2852246778488), .UNSPECIFIED.);
#5200 = ADVANCED_FACE ('', (#5140), #5190, .T.);
#5210 = ORIENTED_EDGE ('', *, *, #1610, .T.);
#5220 = ORIENTED_EDGE ('', *, *, #5100, .T.);
#5230 = ORIENTED_EDGE ('', *, *, #430, .F.);
#5240 = ORIENTED_EDGE ('', *, *, #150, .F.);
#5250 = EDGE_LOOP ('', (#5210, #5220, #5230, #5240));
#5260 = FACE_OUTER_BOUND ('', #5250, .T.);
#5270 = CARTESIAN_POINT ('', (-0.654999999999998, 0.750999999999998, -1.91959232631025));
#5280 = CARTESIAN_POINT ('', (-0.654999999999998, 0.750999999999998, -4.79970943090326));
#5290 = CARTESIAN_POINT ('', (-0.654999999999998, -0.750999999999997, -1.91959232631025));
#5300 = CARTESIAN_POINT ('', (-0.654999999999998, -0.750999999999997, -4.79970943090326));
#5310 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5270, #5280), (#5290, #5300)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-35.001, -33.499), (-3.001, -0.120882895406992), .UNSPECIFIED.);
#5320 = ADVANCED_FACE ('', (#5260), #5310, .T.);
#5330 = ORIENTED_EDGE ('', *, *, #4900, .F.);
#5340 = CARTESIAN_POINT ('', (-0.311569131784553, 0.757398876313952, -1.57716145809481));
#5350 = CARTESIAN_POINT ('', (-0.00499999999999901, 0.782946303962662, 4.44089209850063E-16));
#5360 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5340, #5350), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5370 = EDGE_CURVE ('', #4770, #4220, #5360, .T.);
#5380 = ORIENTED_EDGE ('', *, *, #5370, .T.);
#5390 = ORIENTED_EDGE ('', *, *, #4280, .T.);
#5400 = CARTESIAN_POINT ('', (-0.00499999999999901, -0.782946303962673, 4.44089209850063E-16));
#5410 = CARTESIAN_POINT ('', (-0.311569131784553, -0.757398876313958, -1.57716145809481));
#5420 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5400, #5410), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5430 = EDGE_CURVE ('', #4240, #4860, #5420, .T.);
#5440 = ORIENTED_EDGE ('', *, *, #5430, .T.);
#5450 = EDGE_LOOP ('', (#5330, #5380, #5390, #5440));
#5460 = FACE_OUTER_BOUND ('', #5450, .T.);
#5470 = CARTESIAN_POINT ('', (-0.00477628863057511, -0.783946303962672, 0.00115089522399181));
#5480 = CARTESIAN_POINT ('', (-0.00477628863057511, 0.783946303962665, 0.00115089522399181));
#5490 = CARTESIAN_POINT ('', (-0.311792843153977, -0.783946303962672, -1.5783123533188));
#5500 = CARTESIAN_POINT ('', (-0.311792843153977, 0.783946303962666, -1.5783123533188));
#5510 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5470, #5480), (#5490, #5500)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1.60785314417992, 0.00117243617882412), (-35.0339463039627, -33.4660536960373), .UNSPECIFIED.);
#5520 = ADVANCED_FACE ('', (#5460), #5510, .T.);
#5530 = ORIENTED_EDGE ('', *, *, #5040, .T.);
#5540 = CARTESIAN_POINT ('', (-0.585088308960991, -0.951659307586582, -1.85068063527125));
#5550 = CARTESIAN_POINT ('', (-0.22535243496179, -0.981637297086517, 1.33226762955019E-15));
#5560 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5540, #5550), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5570 = EDGE_CURVE ('', #4930, #4480, #5560, .T.);
#5580 = ORIENTED_EDGE ('', *, *, #5570, .T.);
#5590 = ORIENTED_EDGE ('', *, *, #4520, .T.);
#5600 = ORIENTED_EDGE ('', *, *, #570, .F.);
#5610 = EDGE_LOOP ('', (#5530, #5580, #5590, #5600));
#5620 = FACE_OUTER_BOUND ('', #5610, .T.);
#5630 = CARTESIAN_POINT ('', (-0.224276572892824, -0.981726952258931, 0.00100000000000033));
#5640 = CARTESIAN_POINT ('', (-0.224276572892824, -0.981726952258928, -4.27159232631023));
#5650 = CARTESIAN_POINT ('', (-3.00607586206896, -0.749910344827586, 0.00100000000000033));
#5660 = CARTESIAN_POINT ('', (-3.00607586206896, -0.749910344827583, -4.27159232631023));
#5670 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5630, #5640), (#5650, #5660)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.220036632616914, 3.01147823593622), (-6.40546494440002, -2.1328726180898), .UNSPECIFIED.);
#5680 = ADVANCED_FACE ('', (#5620), #5670, .T.);
#5690 = ORIENTED_EDGE ('', *, *, #4420, .F.);
#5700 = CARTESIAN_POINT ('', (-0.22535243496179, 0.981637297086517, 1.33226762955019E-15));
#5710 = CARTESIAN_POINT ('', (-0.585088308960991, 0.951659307586583, -1.85068063527125));
#5720 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5700, #5710), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5730 = EDGE_CURVE ('', #4310, #4700, #5720, .T.);
#5740 = ORIENTED_EDGE ('', *, *, #5730, .T.);
#5750 = ORIENTED_EDGE ('', *, *, #4740, .F.);
#5760 = ORIENTED_EDGE ('', *, *, #1490, .T.);
#5770 = EDGE_LOOP ('', (#5690, #5740, #5750, #5760));
#5780 = FACE_OUTER_BOUND ('', #5770, .T.);
#5790 = CARTESIAN_POINT ('', (-3.00607586206896, 0.749910344827586, 0.00100000000000033));
#5800 = CARTESIAN_POINT ('', (-3.00607586206896, 0.749910344827584, -4.27159232631023));
#5810 = CARTESIAN_POINT ('', (-0.224276572892824, 0.981726952258931, 0.00100000000000033));
#5820 = CARTESIAN_POINT ('', (-0.224276572892824, 0.981726952258929, -4.27159232631023));
#5830 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5790, #5800), (#5810, #5820)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.220036632616914, 3.01147823593622), (-6.40546494440002, -2.1328726180898), .UNSPECIFIED.);
#5840 = ADVANCED_FACE ('', (#5780), #5830, .T.);
#5850 = ORIENTED_EDGE ('', *, *, #2890, .F.);
#5860 = ORIENTED_EDGE ('', *, *, #3410, .F.);
#5870 = ORIENTED_EDGE ('', *, *, #2390, .F.);
#5880 = ORIENTED_EDGE ('', *, *, #3770, .F.);
#5890 = EDGE_LOOP ('', (#5850, #5860, #5870, #5880));
#5900 = FACE_OUTER_BOUND ('', #5890, .T.);
#5910 = CARTESIAN_POINT ('', (-15.6001474887309, 0.749208594690239, -2.08278561272529));
#5920 = CARTESIAN_POINT ('', (-16.0427411914639, 0.786091403251325, 0.194161598113161));
#5930 = CARTESIAN_POINT ('', (-15.6007542132474, 0.549233873280709, -2.0796642856771));
#5940 = CARTESIAN_POINT ('', (-16.0433479159805, 0.586116681841794, 0.19728292516135));
#5950 = CARTESIAN_POINT ('', (-15.4044287765579, 0.54923387328071, -2.04150248660179));
#5960 = CARTESIAN_POINT ('', (-15.8470224792909, 0.586116681841796, 0.235444724236658));
#5970 = CARTESIAN_POINT ('', (-15.2081033398684, 0.549233873280712, -2.00334068752649));
#5980 = CARTESIAN_POINT ('', (-15.6506970426014, 0.586116681841797, 0.273606523311966));
#5990 = CARTESIAN_POINT ('', (-15.2074966153518, 0.749208594690243, -2.00646201457467));
#6000 = CARTESIAN_POINT ('', (-15.6500903180848, 0.786091403251328, 0.270485196263777));
#6010 = CARTESIAN_POINT ('', (-15.2068898908353, 0.949183316099773, -2.00958334162286));
#6020 = CARTESIAN_POINT ('', (-15.6494835935683, 0.986066124660859, 0.267363869215588));
#6030 = CARTESIAN_POINT ('', (-15.4032153275248, 0.949183316099771, -2.04774514069817));
#6040 = CARTESIAN_POINT ('', (-15.8458090302578, 0.986066124660857, 0.229202070140281));
#6050 = CARTESIAN_POINT ('', (-15.5995407642143, 0.94918331609977, -2.08590693977348));
#6060 = CARTESIAN_POINT ('', (-16.0421344669474, 0.986066124660856, 0.191040271064973));
#6070 = CARTESIAN_POINT ('', (-15.6001474887309, 0.749208594690239, -2.08278561272529));
#6080 = CARTESIAN_POINT ('', (-16.0427411914639, 0.786091403251325, 0.194161598113161));
#6090 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#5910, #5920), (#5930, #5940), (#5950, #5960), (#5970, #5980), (#5990, #6000), (#6010, #6020), (#6030, #6040), (#6050, #6060), (#6070, #6080)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#6100 = ADVANCED_FACE ('', (#5900), #6090, .T.);
#6110 = ORIENTED_EDGE ('', *, *, #2550, .F.);
#6120 = ORIENTED_EDGE ('', *, *, #3470, .F.);
#6130 = ORIENTED_EDGE ('', *, *, #3150, .F.);
#6140 = ORIENTED_EDGE ('', *, *, #3610, .F.);
#6150 = EDGE_LOOP ('', (#6110, #6120, #6130, #6140));
#6160 = FACE_OUTER_BOUND ('', #6150, .T.);
#6170 = CARTESIAN_POINT ('', (-15.6001474887309, -0.74920859469024, -2.08278561272529));
#6180 = CARTESIAN_POINT ('', (-16.0427411914639, -0.786091403251325, 0.194161598113161));
#6190 = CARTESIAN_POINT ('', (-15.5995407642143, -0.949183316099771, -2.08590693977348));
#6200 = CARTESIAN_POINT ('', (-16.0421344669474, -0.986066124660856, 0.191040271064973));
#6210 = CARTESIAN_POINT ('', (-15.4032153275248, -0.949183316099772, -2.04774514069817));
#6220 = CARTESIAN_POINT ('', (-15.8458090302578, -0.986066124660857, 0.22920207014028));
#6230 = CARTESIAN_POINT ('', (-15.2068898908353, -0.949183316099773, -2.00958334162286));
#6240 = CARTESIAN_POINT ('', (-15.6494835935683, -0.986066124660858, 0.267363869215588));
#6250 = CARTESIAN_POINT ('', (-15.2074966153518, -0.749208594690242, -2.00646201457467));
#6260 = CARTESIAN_POINT ('', (-15.6500903180848, -0.786091403251327, 0.270485196263776));
#6270 = CARTESIAN_POINT ('', (-15.2081033398684, -0.549233873280712, -2.00334068752649));
#6280 = CARTESIAN_POINT ('', (-15.6506970426014, -0.586116681841797, 0.273606523311964));
#6290 = CARTESIAN_POINT ('', (-15.4044287765579, -0.54923387328071, -2.04150248660179));
#6300 = CARTESIAN_POINT ('', (-15.8470224792909, -0.586116681841795, 0.235444724236657));
#6310 = CARTESIAN_POINT ('', (-15.6007542132474, -0.549233873280709, -2.0796642856771));
#6320 = CARTESIAN_POINT ('', (-16.0433479159805, -0.586116681841794, 0.197282925161349));
#6330 = CARTESIAN_POINT ('', (-15.6001474887309, -0.74920859469024, -2.08278561272529));
#6340 = CARTESIAN_POINT ('', (-16.0427411914639, -0.786091403251325, 0.194161598113161));
#6350 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#6170, #6180), (#6190, #6200), (#6210, #6220), (#6230, #6240), (#6250, #6260), (#6270, #6280), (#6290, #6300), (#6310, #6320), (#6330, #6340)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#6360 = ADVANCED_FACE ('', (#6160), #6350, .T.);
#6370 = ORIENTED_EDGE ('', *, *, #4830, .F.);
#6380 = ORIENTED_EDGE ('', *, *, #5730, .F.);
#6390 = ORIENTED_EDGE ('', *, *, #4370, .F.);
#6400 = ORIENTED_EDGE ('', *, *, #5370, .F.);
#6410 = EDGE_LOOP ('', (#6370, #6380, #6390, #6400));
#6420 = FACE_OUTER_BOUND ('', #6410, .T.);
#6430 = CARTESIAN_POINT ('', (-0.802503384648184, 0.749208594690235, -2.00646201457467));
#6440 = CARTESIAN_POINT ('', (-0.359909681915154, 0.786091403251323, 0.270485196263777));
#6450 = CARTESIAN_POINT ('', (-0.801896660131637, 0.549233873280705, -2.00334068752649));
#6460 = CARTESIAN_POINT ('', (-0.359302957398607, 0.586116681841794, 0.273606523311966));
#6470 = CARTESIAN_POINT ('', (-0.605571223442105, 0.549233873280705, -2.04150248660179));
#6480 = CARTESIAN_POINT ('', (-0.162977520709074, 0.586116681841794, 0.235444724236658));
#6490 = CARTESIAN_POINT ('', (-0.409245786752573, 0.549233873280705, -2.0796642856771));
#6500 = CARTESIAN_POINT ('', (0.0333479159804586, 0.586116681841794, 0.19728292516135));
#6510 = CARTESIAN_POINT ('', (-0.409852511269119, 0.749208594690235, -2.08278561272529));
#6520 = CARTESIAN_POINT ('', (0.0327411914639111, 0.786091403251324, 0.194161598113161));
#6530 = CARTESIAN_POINT ('', (-0.410459235785666, 0.949183316099765, -2.08590693977348));
#6540 = CARTESIAN_POINT ('', (0.0321344669473635, 0.986066124660854, 0.191040271064973));
#6550 = CARTESIAN_POINT ('', (-0.606784672475198, 0.949183316099764, -2.04774514069817));
#6560 = CARTESIAN_POINT ('', (-0.164190969742169, 0.986066124660853, 0.229202070140281));
#6570 = CARTESIAN_POINT ('', (-0.803110109164731, 0.949183316099765, -2.00958334162286));
#6580 = CARTESIAN_POINT ('', (-0.3605164064317, 0.986066124660854, 0.267363869215588));
#6590 = CARTESIAN_POINT ('', (-0.802503384648184, 0.749208594690235, -2.00646201457467));
#6600 = CARTESIAN_POINT ('', (-0.359909681915154, 0.786091403251323, 0.270485196263777));
#6610 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#6430, #6440), (#6450, #6460), (#6470, #6480), (#6490, #6500), (#6510, #6520), (#6530, #6540), (#6550, #6560), (#6570, #6580), (#6590, #6600)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#6620 = ADVANCED_FACE ('', (#6420), #6610, .T.);
#6630 = ORIENTED_EDGE ('', *, *, #4590, .F.);
#6640 = ORIENTED_EDGE ('', *, *, #5570, .F.);
#6650 = ORIENTED_EDGE ('', *, *, #4990, .F.);
#6660 = ORIENTED_EDGE ('', *, *, #5430, .F.);
#6670 = EDGE_LOOP ('', (#6630, #6640, #6650, #6660));
#6680 = FACE_OUTER_BOUND ('', #6670, .T.);
#6690 = CARTESIAN_POINT ('', (-0.802503384648184, -0.749208594690245, -2.00646201457467));
#6700 = CARTESIAN_POINT ('', (-0.359909681915158, -0.786091403251332, 0.270485196263777));
#6710 = CARTESIAN_POINT ('', (-0.803110109164731, -0.949183316099775, -2.00958334162286));
#6720 = CARTESIAN_POINT ('', (-0.360516406431705, -0.986066124660863, 0.267363869215589));
#6730 = CARTESIAN_POINT ('', (-0.606784672475198, -0.949183316099775, -2.04774514069817));
#6740 = CARTESIAN_POINT ('', (-0.164190969742171, -0.986066124660863, 0.229202070140281));
#6750 = CARTESIAN_POINT ('', (-0.410459235785666, -0.949183316099775, -2.08590693977348));
#6760 = CARTESIAN_POINT ('', (0.0321344669473635, -0.986066124660862, 0.191040271064974));
#6770 = CARTESIAN_POINT ('', (-0.409852511269119, -0.749208594690245, -2.08278561272529));
#6780 = CARTESIAN_POINT ('', (0.0327411914639093, -0.786091403251332, 0.194161598113162));
#6790 = CARTESIAN_POINT ('', (-0.409245786752573, -0.549233873280715, -2.0796642856771));
#6800 = CARTESIAN_POINT ('', (0.0333479159804551, -0.586116681841801, 0.197282925161351));
#6810 = CARTESIAN_POINT ('', (-0.605571223442105, -0.549233873280716, -2.04150248660179));
#6820 = CARTESIAN_POINT ('', (-0.162977520709079, -0.586116681841802, 0.235444724236658));
#6830 = CARTESIAN_POINT ('', (-0.801896660131637, -0.549233873280716, -2.00334068752649));
#6840 = CARTESIAN_POINT ('', (-0.359302957398611, -0.586116681841802, 0.273606523311965));
#6850 = CARTESIAN_POINT ('', (-0.802503384648184, -0.749208594690245, -2.00646201457467));
#6860 = CARTESIAN_POINT ('', (-0.359909681915158, -0.786091403251332, 0.270485196263777));
#6870 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#6690, #6700), (#6710, #6720), (#6730, #6740), (#6750, #6760), (#6770, #6780), (#6790, #6800), (#6810, #6820), (#6830, #6840), (#6850, #6860)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#6880 = ADVANCED_FACE ('', (#6680), #6870, .T.);
#6890 = CLOSED_SHELL ('', (#360, #1200, #2040, #2240, #2720, #3240, #3360, #3560, #3720, #3880, #4040, #4200, #4680, #5200, #5320, #5520, #5680, #5840, #6100, #6360, #6620, #6880));
#6900 = MANIFOLD_SOLID_BREP ('CUT', #6890);
#6910 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#6920 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#6930 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#6940 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #6910, 'DISTANCE_ACCURACY_VALUE', '');
#6950 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#6940))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#6910, #6920, #6930))
   REPRESENTATION_CONTEXT ('', '3D')
);
#6960 = COLOUR_RGB ('', 1., 0.74901960784314, 0.);
#6970 = FILL_AREA_STYLE_COLOUR ('', #6960);
#6980 = FILL_AREA_STYLE ('', (#6970));
#6990 = SURFACE_STYLE_FILL_AREA (#6980);
#7000 = SURFACE_SIDE_STYLE ('', (#6990));
#7010 = SURFACE_STYLE_USAGE (.POSITIVE., #7000);
#7020 = PRESENTATION_STYLE_ASSIGNMENT ((#7010));
#7030 = STYLED_ITEM ('', (#7020), #6900);
#7040 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#6900), #6950);
#7050 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#7060 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #7050);
#7070 = MECHANICAL_CONTEXT ('', #7050, 'mechanical');
#7080 = PRODUCT ('NONE', '', '', (#7070));
#7090 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#7100 = PERSON ('', '', $, $, $, $);
#7110 = ORGANIZATION ($, '', '');
#7120 = PERSON_AND_ORGANIZATION (#7100, #7110);
#7130 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#7120, #7090, (#7080));
#7140 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#7080));
#7150 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #7080, .NOT_KNOWN.);
#7160 = APPROVAL_STATUS ('approved');
#7170 = APPROVAL (#7160, '');
#7180 = CALENDAR_DATE (2017, 24, 2);
#7190 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#7200 = LOCAL_TIME (14, 57, 19., #7190);
#7210 = DATE_AND_TIME (#7180, #7200);
#7220 = APPROVAL_DATE_TIME (#7210, #7170);
#7230 = APPROVAL_ROLE ('');
#7240 = PERSON ('', '', $, $, $, $);
#7250 = ORGANIZATION ($, '', '');
#7260 = PERSON_AND_ORGANIZATION (#7240, #7250);
#7270 = APPROVAL_PERSON_ORGANIZATION (#7260, #7170, #7230);
#7280 = CC_DESIGN_APPROVAL (#7170, (#7150));
#7290 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#7300 = PERSON ('', '', $, $, $, $);
#7310 = ORGANIZATION ($, '', '');
#7320 = PERSON_AND_ORGANIZATION (#7300, #7310);
#7330 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#7320, #7290, (#7150));
#7340 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#7350 = PERSON ('', '', $, $, $, $);
#7360 = ORGANIZATION ($, '', '');
#7370 = PERSON_AND_ORGANIZATION (#7350, #7360);
#7380 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#7370, #7340, (#7150));
#7390 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#7400 = SECURITY_CLASSIFICATION ('', '', #7390);
#7410 = APPROVAL_STATUS ('approved');
#7420 = APPROVAL (#7410, '');
#7430 = CALENDAR_DATE (2017, 24, 2);
#7440 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#7450 = LOCAL_TIME (14, 57, 19., #7440);
#7460 = DATE_AND_TIME (#7430, #7450);
#7470 = APPROVAL_DATE_TIME (#7460, #7420);
#7480 = APPROVAL_ROLE ('');
#7490 = PERSON ('', '', $, $, $, $);
#7500 = ORGANIZATION ($, '', '');
#7510 = PERSON_AND_ORGANIZATION (#7490, #7500);
#7520 = APPROVAL_PERSON_ORGANIZATION (#7510, #7420, #7480);
#7530 = CC_DESIGN_APPROVAL (#7420, (#7400));
#7540 = DATE_TIME_ROLE ('classification_date');
#7550 = CALENDAR_DATE (2017, 24, 2);
#7560 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#7570 = LOCAL_TIME (14, 57, 19., #7560);
#7580 = DATE_AND_TIME (#7550, #7570);
#7590 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#7580, #7540, (#7400));
#7600 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#7610 = PERSON ('', '', $, $, $, $);
#7620 = ORGANIZATION ($, '', '');
#7630 = PERSON_AND_ORGANIZATION (#7610, #7620);
#7640 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#7630, #7600, (#7400));
#7650 = CC_DESIGN_SECURITY_CLASSIFICATION (#7400, (#7150));
#7660 = DESIGN_CONTEXT ('', #7050, 'design');
#7670 = PRODUCT_DEFINITION ('', '', #7150, #7660);
#7680 = APPROVAL_STATUS ('approved');
#7690 = APPROVAL (#7680, '');
#7700 = CALENDAR_DATE (2017, 24, 2);
#7710 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#7720 = LOCAL_TIME (14, 57, 19., #7710);
#7730 = DATE_AND_TIME (#7700, #7720);
#7740 = APPROVAL_DATE_TIME (#7730, #7690);
#7750 = APPROVAL_ROLE ('');
#7760 = PERSON ('', '', $, $, $, $);
#7770 = ORGANIZATION ($, '', '');
#7780 = PERSON_AND_ORGANIZATION (#7760, #7770);
#7790 = APPROVAL_PERSON_ORGANIZATION (#7780, #7690, #7750);
#7800 = CC_DESIGN_APPROVAL (#7690, (#7670));
#7810 = DATE_TIME_ROLE ('creation_date');
#7820 = CALENDAR_DATE (2017, 24, 2);
#7830 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#7840 = LOCAL_TIME (14, 57, 19., #7830);
#7850 = DATE_AND_TIME (#7820, #7840);
#7860 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#7850, #7810, (#7670));
#7870 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#7880 = PERSON ('', '', $, $, $, $);
#7890 = ORGANIZATION ($, '', '');
#7900 = PERSON_AND_ORGANIZATION (#7880, #7890);
#7910 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#7900, #7870, (#7670));
#7920 = PRODUCT_DEFINITION_SHAPE ('', '', #7670);
#7930 = SHAPE_DEFINITION_REPRESENTATION (#7920, #7040);
ENDSEC;
END-ISO-10303-21;