ISO-10303-21;
HEADER;
FILE_DESCRIPTION ((), '1');
FILE_NAME ('C:\\TDMTemp\\Tools\\SMLIB\\insert\\ARNO\\step\\PE14.5 HSS5_TIALN.stp', '2009-12-10T16:39:49', ('Unknown'), ('Unknown'), 'HarmonyWare STEP v1.4.2', 'HarmonyWare Translators', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;

DATA;
#10 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, -1.585));
#20 = VERTEX_POINT ('', #10);
#30 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, 1.585));
#40 = VERTEX_POINT ('', #30);
#50 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, -1.585));
#60 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, 1.585));
#70 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#50, #60), .UNSPECIFIED., .F., .U., (2, 2), (-1., 1.), .UNSPECIFIED.);
#80 = EDGE_CURVE ('', #20, #40, #70, .T.);
#90 = ORIENTED_EDGE ('', *, *, #80, .F.);
#100 = CARTESIAN_POINT ('', (7.25, 3.22790796848689, -1.585));
#110 = VERTEX_POINT ('', #100);
#120 = CARTESIAN_POINT ('', (7.25, 3.22790796848689, -1.585));
#130 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, -1.585));
#140 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#120, #130), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#150 = EDGE_CURVE ('', #110, #20, #140, .T.);
#160 = ORIENTED_EDGE ('', *, *, #150, .F.);
#170 = CARTESIAN_POINT ('', (7.25, 3.22790796848689, 1.585));
#180 = VERTEX_POINT ('', #170);
#190 = CARTESIAN_POINT ('', (7.25, 3.22790796848689, -1.585));
#200 = CARTESIAN_POINT ('', (7.25, 3.22790796848689, 1.585));
#210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#190, #200), .UNSPECIFIED., .F., .U., (2, 2), (-1., 1.), .UNSPECIFIED.);
#220 = EDGE_CURVE ('', #110, #180, #210, .T.);
#230 = ORIENTED_EDGE ('', *, *, #220, .T.);
#240 = CARTESIAN_POINT ('', (7.25, 3.22790796848689, 1.585));
#250 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, 1.585));
#260 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#240, #250), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#270 = EDGE_CURVE ('', #180, #40, #260, .T.);
#280 = ORIENTED_EDGE ('', *, *, #270, .T.);
#290 = EDGE_LOOP ('', (#90, #160, #230, #280));
#300 = FACE_OUTER_BOUND ('', #290, .T.);
#310 = CARTESIAN_POINT ('', (7.25, 3.22790796848689, -1.585));
#320 = CARTESIAN_POINT ('', (-2.66453525910038E-15, -1.33226762955019E-15, -1.585));
#330 = CARTESIAN_POINT ('', (7.25, 3.22790796848689, 1.585));
#340 = CARTESIAN_POINT ('', (-2.66453525910038E-15, -1.33226762955019E-15, 1.585));
#350 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#310, #320), (#330, #340)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1., 1.), (0., 1.), .UNSPECIFIED.);
#360 = ADVANCED_FACE ('', (#300), #350, .T.);
#370 = ORIENTED_EDGE ('', *, *, #220, .F.);
#380 = CARTESIAN_POINT ('', (7.25, 11., -1.585));
#390 = VERTEX_POINT ('', #380);
#400 = CARTESIAN_POINT ('', (7.25, 11., -1.585));
#410 = CARTESIAN_POINT ('', (7.25, 3.22790796848689, -1.585));
#420 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#400, #410), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#430 = EDGE_CURVE ('', #390, #110, #420, .T.);
#440 = ORIENTED_EDGE ('', *, *, #430, .F.);
#450 = CARTESIAN_POINT ('', (7.25, 11., 1.585));
#460 = VERTEX_POINT ('', #450);
#470 = CARTESIAN_POINT ('', (7.25, 11., -1.585));
#480 = CARTESIAN_POINT ('', (7.25, 11., 1.585));
#490 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#470, #480), .UNSPECIFIED., .F., .U., (2, 2), (-1., 1.), .UNSPECIFIED.);
#500 = EDGE_CURVE ('', #390, #460, #490, .T.);
#510 = ORIENTED_EDGE ('', *, *, #500, .T.);
#520 = CARTESIAN_POINT ('', (7.25, 11., 1.585));
#530 = CARTESIAN_POINT ('', (7.25, 3.22790796848689, 1.585));
#540 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#520, #530), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#550 = EDGE_CURVE ('', #460, #180, #540, .T.);
#560 = ORIENTED_EDGE ('', *, *, #550, .T.);
#570 = EDGE_LOOP ('', (#370, #440, #510, #560));
#580 = FACE_OUTER_BOUND ('', #570, .T.);
#590 = CARTESIAN_POINT ('', (7.25, 11., -1.585));
#600 = CARTESIAN_POINT ('', (7.25, 3.22790796848689, -1.585));
#610 = CARTESIAN_POINT ('', (7.25, 11., 1.585));
#620 = CARTESIAN_POINT ('', (7.25, 3.22790796848689, 1.585));
#630 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#590, #600), (#610, #620)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1., 1.), (0., 1.), .UNSPECIFIED.);
#640 = ADVANCED_FACE ('', (#580), #630, .T.);
#650 = ORIENTED_EDGE ('', *, *, #500, .F.);
#660 = CARTESIAN_POINT ('', (-7.25, 11., -1.585));
#670 = VERTEX_POINT ('', #660);
#680 = CARTESIAN_POINT ('', (-7.25, 11., -1.585));
#690 = CARTESIAN_POINT ('', (7.25, 11., -1.585));
#700 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#680, #690), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#710 = EDGE_CURVE ('', #670, #390, #700, .T.);
#720 = ORIENTED_EDGE ('', *, *, #710, .F.);
#730 = CARTESIAN_POINT ('', (-7.25, 11., 1.585));
#740 = VERTEX_POINT ('', #730);
#750 = CARTESIAN_POINT ('', (-7.25, 11., -1.585));
#760 = CARTESIAN_POINT ('', (-7.25, 11., 1.585));
#770 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#750, #760), .UNSPECIFIED., .F., .U., (2, 2), (-1., 1.), .UNSPECIFIED.);
#780 = EDGE_CURVE ('', #670, #740, #770, .T.);
#790 = ORIENTED_EDGE ('', *, *, #780, .T.);
#800 = CARTESIAN_POINT ('', (-7.25, 11., 1.585));
#810 = CARTESIAN_POINT ('', (7.25, 11., 1.585));
#820 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#800, #810), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#830 = EDGE_CURVE ('', #740, #460, #820, .T.);
#840 = ORIENTED_EDGE ('', *, *, #830, .T.);
#850 = EDGE_LOOP ('', (#650, #720, #790, #840));
#860 = FACE_OUTER_BOUND ('', #850, .T.);
#870 = CARTESIAN_POINT ('', (-7.25, 11., -1.585));
#880 = CARTESIAN_POINT ('', (7.25, 11., -1.585));
#890 = CARTESIAN_POINT ('', (-7.25, 11., 1.585));
#900 = CARTESIAN_POINT ('', (7.25, 11., 1.585));
#910 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#870, #880), (#890, #900)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1., 1.), (0., 1.), .UNSPECIFIED.);
#920 = ADVANCED_FACE ('', (#860), #910, .T.);
#930 = ORIENTED_EDGE ('', *, *, #780, .F.);
#940 = CARTESIAN_POINT ('', (-7.25, 3.22790796848689, -1.585));
#950 = VERTEX_POINT ('', #940);
#960 = CARTESIAN_POINT ('', (-7.25, 3.22790796848689, -1.585));
#970 = CARTESIAN_POINT ('', (-7.25, 11., -1.585));
#980 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#960, #970), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#990 = EDGE_CURVE ('', #950, #670, #980, .T.);
#1000 = ORIENTED_EDGE ('', *, *, #990, .F.);
#1010 = CARTESIAN_POINT ('', (-7.25, 3.22790796848689, 1.585));
#1020 = VERTEX_POINT ('', #1010);
#1030 = CARTESIAN_POINT ('', (-7.25, 3.22790796848689, -1.585));
#1040 = CARTESIAN_POINT ('', (-7.25, 3.22790796848689, 1.585));
#1050 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1030, #1040), .UNSPECIFIED., .F., .U., (2, 2), (-1., 1.), .UNSPECIFIED.);
#1060 = EDGE_CURVE ('', #950, #1020, #1050, .T.);
#1070 = ORIENTED_EDGE ('', *, *, #1060, .T.);
#1080 = CARTESIAN_POINT ('', (-7.25, 3.22790796848689, 1.585));
#1090 = CARTESIAN_POINT ('', (-7.25, 11., 1.585));
#1100 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1080, #1090), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1110 = EDGE_CURVE ('', #1020, #740, #1100, .T.);
#1120 = ORIENTED_EDGE ('', *, *, #1110, .T.);
#1130 = EDGE_LOOP ('', (#930, #1000, #1070, #1120));
#1140 = FACE_OUTER_BOUND ('', #1130, .T.);
#1150 = CARTESIAN_POINT ('', (-7.25, 3.22790796848689, -1.585));
#1160 = CARTESIAN_POINT ('', (-7.25, 11., -1.585));
#1170 = CARTESIAN_POINT ('', (-7.25, 3.22790796848689, 1.585));
#1180 = CARTESIAN_POINT ('', (-7.25, 11., 1.585));
#1190 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1150, #1160), (#1170, #1180)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1., 1.), (0., 1.), .UNSPECIFIED.);
#1200 = ADVANCED_FACE ('', (#1140), #1190, .T.);
#1210 = ORIENTED_EDGE ('', *, *, #1060, .F.);
#1220 = CARTESIAN_POINT ('', (0., 0., -1.585));
#1230 = CARTESIAN_POINT ('', (-7.25, 3.22790796848689, -1.585));
#1240 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1220, #1230), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1250 = EDGE_CURVE ('', #20, #950, #1240, .T.);
#1260 = ORIENTED_EDGE ('', *, *, #1250, .F.);
#1270 = ORIENTED_EDGE ('', *, *, #80, .T.);
#1280 = CARTESIAN_POINT ('', (0., 0., 1.585));
#1290 = CARTESIAN_POINT ('', (-7.25, 3.22790796848689, 1.585));
#1300 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1280, #1290), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1310 = EDGE_CURVE ('', #40, #1020, #1300, .T.);
#1320 = ORIENTED_EDGE ('', *, *, #1310, .T.);
#1330 = EDGE_LOOP ('', (#1210, #1260, #1270, #1320));
#1340 = FACE_OUTER_BOUND ('', #1330, .T.);
#1350 = CARTESIAN_POINT ('', (0., 0., -1.585));
#1360 = CARTESIAN_POINT ('', (-7.25, 3.22790796848689, -1.585));
#1370 = CARTESIAN_POINT ('', (0., 0., 1.585));
#1380 = CARTESIAN_POINT ('', (-7.25, 3.22790796848689, 1.585));
#1390 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1350, #1360), (#1370, #1380)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1., 1.), (0., 1.), .UNSPECIFIED.);
#1400 = ADVANCED_FACE ('', (#1340), #1390, .T.);
#1410 = ORIENTED_EDGE ('', *, *, #270, .F.);
#1420 = ORIENTED_EDGE ('', *, *, #550, .F.);
#1430 = ORIENTED_EDGE ('', *, *, #830, .F.);
#1440 = ORIENTED_EDGE ('', *, *, #1110, .F.);
#1450 = ORIENTED_EDGE ('', *, *, #1310, .F.);
#1460 = EDGE_LOOP ('', (#1410, #1420, #1430, #1440, #1450));
#1470 = FACE_OUTER_BOUND ('', #1460, .T.);
#1480 = CARTESIAN_POINT ('', (-7.25, 0., 1.585));
#1490 = CARTESIAN_POINT ('', (-7.25, 11., 1.585));
#1500 = CARTESIAN_POINT ('', (7.25, 0., 1.585));
#1510 = CARTESIAN_POINT ('', (7.25, 11., 1.585));
#1520 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1480, #1490), (#1500, #1510)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.137867604135274, 0.862132395864726), (0.225278872102622, 0.774721127897378), .UNSPECIFIED.);
#1530 = ADVANCED_FACE ('', (#1470), #1520, .T.);
#1540 = ORIENTED_EDGE ('', *, *, #150, .T.);
#1550 = ORIENTED_EDGE ('', *, *, #1250, .T.);
#1560 = ORIENTED_EDGE ('', *, *, #990, .T.);
#1570 = ORIENTED_EDGE ('', *, *, #710, .T.);
#1580 = ORIENTED_EDGE ('', *, *, #430, .T.);
#1590 = EDGE_LOOP ('', (#1540, #1550, #1560, #1570, #1580));
#1600 = FACE_OUTER_BOUND ('', #1590, .T.);
#1610 = CARTESIAN_POINT ('', (-7.25, 0., -1.585));
#1620 = CARTESIAN_POINT ('', (7.25, 0., -1.585));
#1630 = CARTESIAN_POINT ('', (-7.25, 11., -1.585));
#1640 = CARTESIAN_POINT ('', (7.25, 11., -1.585));
#1650 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1610, #1620), (#1630, #1640)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.225278872102622, 0.774721127897378), (0.137867604135274, 0.862132395864726), .UNSPECIFIED.);
#1660 = ADVANCED_FACE ('', (#1600), #1650, .T.);
#1670 = CLOSED_SHELL ('', (#360, #640, #920, #1200, #1400, #1530, #1660));
#1680 = MANIFOLD_SOLID_BREP ('', #1670);
#1690 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#1700 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#1710 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#1720 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #1690, 'DISTANCE_ACCURACY_VALUE', '');
#1730 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#1720))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#1690, #1700, #1710))
   REPRESENTATION_CONTEXT ('', '3D')
);
#1740 = COLOUR_RGB ('', 1., 0.74901960784314, 0.);
#1750 = FILL_AREA_STYLE_COLOUR ('', #1740);
#1760 = FILL_AREA_STYLE ('', (#1750));
#1770 = SURFACE_STYLE_FILL_AREA (#1760);
#1780 = SURFACE_SIDE_STYLE ('', (#1770));
#1790 = SURFACE_STYLE_USAGE (.POSITIVE., #1780);
#1800 = PRESENTATION_STYLE_ASSIGNMENT ((#1790));
#1810 = STYLED_ITEM ('', (#1800), #1680);
#1820 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#1680), #1730);
#1830 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#1840 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #1830);
#1850 = MECHANICAL_CONTEXT ('', #1830, 'mechanical');
#1860 = PRODUCT ('product-name', '', '', (#1850));
#1870 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#1880 = PERSON ('', '', $, $, $, $);
#1890 = ORGANIZATION ($, '', '');
#1900 = PERSON_AND_ORGANIZATION (#1880, #1890);
#1910 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#1900, #1870, (#1860));
#1920 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#1860));
#1930 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #1860, .NOT_KNOWN.);
#1940 = APPROVAL_STATUS ('approved');
#1950 = APPROVAL (#1940, '');
#1960 = CALENDAR_DATE (2009, 10, 12);
#1970 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#1980 = LOCAL_TIME (16, 39, 49., #1970);
#1990 = DATE_AND_TIME (#1960, #1980);
#2000 = APPROVAL_DATE_TIME (#1990, #1950);
#2010 = APPROVAL_ROLE ('');
#2020 = PERSON ('', '', $, $, $, $);
#2030 = ORGANIZATION ($, '', '');
#2040 = PERSON_AND_ORGANIZATION (#2020, #2030);
#2050 = APPROVAL_PERSON_ORGANIZATION (#2040, #1950, #2010);
#2060 = CC_DESIGN_APPROVAL (#1950, (#1930));
#2070 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#2080 = PERSON ('', '', $, $, $, $);
#2090 = ORGANIZATION ($, '', '');
#2100 = PERSON_AND_ORGANIZATION (#2080, #2090);
#2110 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#2100, #2070, (#1930));
#2120 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#2130 = PERSON ('', '', $, $, $, $);
#2140 = ORGANIZATION ($, '', '');
#2150 = PERSON_AND_ORGANIZATION (#2130, #2140);
#2160 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#2150, #2120, (#1930));
#2170 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#2180 = SECURITY_CLASSIFICATION ('', '', #2170);
#2190 = APPROVAL_STATUS ('approved');
#2200 = APPROVAL (#2190, '');
#2210 = CALENDAR_DATE (2009, 10, 12);
#2220 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#2230 = LOCAL_TIME (16, 39, 49., #2220);
#2240 = DATE_AND_TIME (#2210, #2230);
#2250 = APPROVAL_DATE_TIME (#2240, #2200);
#2260 = APPROVAL_ROLE ('');
#2270 = PERSON ('', '', $, $, $, $);
#2280 = ORGANIZATION ($, '', '');
#2290 = PERSON_AND_ORGANIZATION (#2270, #2280);
#2300 = APPROVAL_PERSON_ORGANIZATION (#2290, #2200, #2260);
#2310 = CC_DESIGN_APPROVAL (#2200, (#2180));
#2320 = DATE_TIME_ROLE ('classification_date');
#2330 = CALENDAR_DATE (2009, 10, 12);
#2340 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#2350 = LOCAL_TIME (16, 39, 49., #2340);
#2360 = DATE_AND_TIME (#2330, #2350);
#2370 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#2360, #2320, (#2180));
#2380 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#2390 = PERSON ('', '', $, $, $, $);
#2400 = ORGANIZATION ($, '', '');
#2410 = PERSON_AND_ORGANIZATION (#2390, #2400);
#2420 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#2410, #2380, (#2180));
#2430 = CC_DESIGN_SECURITY_CLASSIFICATION (#2180, (#1930));
#2440 = DESIGN_CONTEXT ('', #1830, 'design');
#2450 = PRODUCT_DEFINITION ('', '', #1930, #2440);
#2460 = APPROVAL_STATUS ('approved');
#2470 = APPROVAL (#2460, '');
#2480 = CALENDAR_DATE (2009, 10, 12);
#2490 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#2500 = LOCAL_TIME (16, 39, 49., #2490);
#2510 = DATE_AND_TIME (#2480, #2500);
#2520 = APPROVAL_DATE_TIME (#2510, #2470);
#2530 = APPROVAL_ROLE ('');
#2540 = PERSON ('', '', $, $, $, $);
#2550 = ORGANIZATION ($, '', '');
#2560 = PERSON_AND_ORGANIZATION (#2540, #2550);
#2570 = APPROVAL_PERSON_ORGANIZATION (#2560, #2470, #2530);
#2580 = CC_DESIGN_APPROVAL (#2470, (#2450));
#2590 = DATE_TIME_ROLE ('creation_date');
#2600 = CALENDAR_DATE (2009, 10, 12);
#2610 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#2620 = LOCAL_TIME (16, 39, 49., #2610);
#2630 = DATE_AND_TIME (#2600, #2620);
#2640 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#2630, #2590, (#2450));
#2650 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#2660 = PERSON ('', '', $, $, $, $);
#2670 = ORGANIZATION ($, '', '');
#2680 = PERSON_AND_ORGANIZATION (#2660, #2670);
#2690 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#2680, #2650, (#2450));
#2700 = PRODUCT_DEFINITION_SHAPE ('', '', #2450);
#2710 = SHAPE_DEFINITION_REPRESENTATION (#2700, #1820);
#2720 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, -1.585));
#2730 = VERTEX_POINT ('', #2720);
#2740 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, 1.585));
#2750 = VERTEX_POINT ('', #2740);
#2760 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, -1.585));
#2770 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, 1.585));
#2780 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2760, #2770), .UNSPECIFIED., .F., .U., (2, 2), (-1., 1.), .UNSPECIFIED.);
#2790 = EDGE_CURVE ('', #2730, #2750, #2780, .T.);
#2800 = ORIENTED_EDGE ('', *, *, #2790, .F.);
#2810 = CARTESIAN_POINT ('', (7.25, 3.22790796848689, -1.585));
#2820 = VERTEX_POINT ('', #2810);
#2830 = CARTESIAN_POINT ('', (7.25, 3.22790796848689, -1.585));
#2840 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, -1.585));
#2850 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2830, #2840), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2860 = EDGE_CURVE ('', #2820, #2730, #2850, .T.);
#2870 = ORIENTED_EDGE ('', *, *, #2860, .F.);
#2880 = CARTESIAN_POINT ('', (7.25, 3.22790796848689, 1.585));
#2890 = VERTEX_POINT ('', #2880);
#2900 = CARTESIAN_POINT ('', (7.25, 3.22790796848689, -1.585));
#2910 = CARTESIAN_POINT ('', (7.25, 3.22790796848689, 1.585));
#2920 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2900, #2910), .UNSPECIFIED., .F., .U., (2, 2), (-1., 1.), .UNSPECIFIED.);
#2930 = EDGE_CURVE ('', #2820, #2890, #2920, .T.);
#2940 = ORIENTED_EDGE ('', *, *, #2930, .T.);
#2950 = CARTESIAN_POINT ('', (7.25, 3.22790796848689, 1.585));
#2960 = CARTESIAN_POINT ('', (-8.88178419700125E-16, -4.44089209850063E-16, 1.585));
#2970 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2950, #2960), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2980 = EDGE_CURVE ('', #2890, #2750, #2970, .T.);
#2990 = ORIENTED_EDGE ('', *, *, #2980, .T.);
#3000 = EDGE_LOOP ('', (#2800, #2870, #2940, #2990));
#3010 = FACE_OUTER_BOUND ('', #3000, .T.);
#3020 = CARTESIAN_POINT ('', (7.25, 3.22790796848689, -1.585));
#3030 = CARTESIAN_POINT ('', (-2.66453525910038E-15, -1.33226762955019E-15, -1.585));
#3040 = CARTESIAN_POINT ('', (7.25, 3.22790796848689, 1.585));
#3050 = CARTESIAN_POINT ('', (-2.66453525910038E-15, -1.33226762955019E-15, 1.585));
#3060 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3020, #3030), (#3040, #3050)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1., 1.), (0., 1.), .UNSPECIFIED.);
#3070 = ADVANCED_FACE ('', (#3010), #3060, .T.);
#3080 = ORIENTED_EDGE ('', *, *, #2930, .F.);
#3090 = CARTESIAN_POINT ('', (7.25, 11., -1.585));
#3100 = VERTEX_POINT ('', #3090);
#3110 = CARTESIAN_POINT ('', (7.25, 11., -1.585));
#3120 = CARTESIAN_POINT ('', (7.25, 3.22790796848689, -1.585));
#3130 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3110, #3120), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3140 = EDGE_CURVE ('', #3100, #2820, #3130, .T.);
#3150 = ORIENTED_EDGE ('', *, *, #3140, .F.);
#3160 = CARTESIAN_POINT ('', (7.25, 11., 1.585));
#3170 = VERTEX_POINT ('', #3160);
#3180 = CARTESIAN_POINT ('', (7.25, 11., -1.585));
#3190 = CARTESIAN_POINT ('', (7.25, 11., 1.585));
#3200 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3180, #3190), .UNSPECIFIED., .F., .U., (2, 2), (-1., 1.), .UNSPECIFIED.);
#3210 = EDGE_CURVE ('', #3100, #3170, #3200, .T.);
#3220 = ORIENTED_EDGE ('', *, *, #3210, .T.);
#3230 = CARTESIAN_POINT ('', (7.25, 11., 1.585));
#3240 = CARTESIAN_POINT ('', (7.25, 3.22790796848689, 1.585));
#3250 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3230, #3240), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3260 = EDGE_CURVE ('', #3170, #2890, #3250, .T.);
#3270 = ORIENTED_EDGE ('', *, *, #3260, .T.);
#3280 = EDGE_LOOP ('', (#3080, #3150, #3220, #3270));
#3290 = FACE_OUTER_BOUND ('', #3280, .T.);
#3300 = CARTESIAN_POINT ('', (7.25, 11., -1.585));
#3310 = CARTESIAN_POINT ('', (7.25, 3.22790796848689, -1.585));
#3320 = CARTESIAN_POINT ('', (7.25, 11., 1.585));
#3330 = CARTESIAN_POINT ('', (7.25, 3.22790796848689, 1.585));
#3340 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3300, #3310), (#3320, #3330)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1., 1.), (0., 1.), .UNSPECIFIED.);
#3350 = ADVANCED_FACE ('', (#3290), #3340, .T.);
#3360 = ORIENTED_EDGE ('', *, *, #3210, .F.);
#3370 = CARTESIAN_POINT ('', (-7.25, 11., -1.585));
#3380 = VERTEX_POINT ('', #3370);
#3390 = CARTESIAN_POINT ('', (-7.25, 11., -1.585));
#3400 = CARTESIAN_POINT ('', (7.25, 11., -1.585));
#3410 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3390, #3400), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3420 = EDGE_CURVE ('', #3380, #3100, #3410, .T.);
#3430 = ORIENTED_EDGE ('', *, *, #3420, .F.);
#3440 = CARTESIAN_POINT ('', (-7.25, 11., 1.585));
#3450 = VERTEX_POINT ('', #3440);
#3460 = CARTESIAN_POINT ('', (-7.25, 11., -1.585));
#3470 = CARTESIAN_POINT ('', (-7.25, 11., 1.585));
#3480 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3460, #3470), .UNSPECIFIED., .F., .U., (2, 2), (-1., 1.), .UNSPECIFIED.);
#3490 = EDGE_CURVE ('', #3380, #3450, #3480, .T.);
#3500 = ORIENTED_EDGE ('', *, *, #3490, .T.);
#3510 = CARTESIAN_POINT ('', (-7.25, 11., 1.585));
#3520 = CARTESIAN_POINT ('', (7.25, 11., 1.585));
#3530 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3510, #3520), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3540 = EDGE_CURVE ('', #3450, #3170, #3530, .T.);
#3550 = ORIENTED_EDGE ('', *, *, #3540, .T.);
#3560 = EDGE_LOOP ('', (#3360, #3430, #3500, #3550));
#3570 = FACE_OUTER_BOUND ('', #3560, .T.);
#3580 = CARTESIAN_POINT ('', (-7.25, 11., -1.585));
#3590 = CARTESIAN_POINT ('', (7.25, 11., -1.585));
#3600 = CARTESIAN_POINT ('', (-7.25, 11., 1.585));
#3610 = CARTESIAN_POINT ('', (7.25, 11., 1.585));
#3620 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3580, #3590), (#3600, #3610)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1., 1.), (0., 1.), .UNSPECIFIED.);
#3630 = ADVANCED_FACE ('', (#3570), #3620, .T.);
#3640 = ORIENTED_EDGE ('', *, *, #3490, .F.);
#3650 = CARTESIAN_POINT ('', (-7.25, 3.22790796848689, -1.585));
#3660 = VERTEX_POINT ('', #3650);
#3670 = CARTESIAN_POINT ('', (-7.25, 3.22790796848689, -1.585));
#3680 = CARTESIAN_POINT ('', (-7.25, 11., -1.585));
#3690 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3670, #3680), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3700 = EDGE_CURVE ('', #3660, #3380, #3690, .T.);
#3710 = ORIENTED_EDGE ('', *, *, #3700, .F.);
#3720 = CARTESIAN_POINT ('', (-7.25, 3.22790796848689, 1.585));
#3730 = VERTEX_POINT ('', #3720);
#3740 = CARTESIAN_POINT ('', (-7.25, 3.22790796848689, -1.585));
#3750 = CARTESIAN_POINT ('', (-7.25, 3.22790796848689, 1.585));
#3760 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3740, #3750), .UNSPECIFIED., .F., .U., (2, 2), (-1., 1.), .UNSPECIFIED.);
#3770 = EDGE_CURVE ('', #3660, #3730, #3760, .T.);
#3780 = ORIENTED_EDGE ('', *, *, #3770, .T.);
#3790 = CARTESIAN_POINT ('', (-7.25, 3.22790796848689, 1.585));
#3800 = CARTESIAN_POINT ('', (-7.25, 11., 1.585));
#3810 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3790, #3800), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3820 = EDGE_CURVE ('', #3730, #3450, #3810, .T.);
#3830 = ORIENTED_EDGE ('', *, *, #3820, .T.);
#3840 = EDGE_LOOP ('', (#3640, #3710, #3780, #3830));
#3850 = FACE_OUTER_BOUND ('', #3840, .T.);
#3860 = CARTESIAN_POINT ('', (-7.25, 3.22790796848689, -1.585));
#3870 = CARTESIAN_POINT ('', (-7.25, 11., -1.585));
#3880 = CARTESIAN_POINT ('', (-7.25, 3.22790796848689, 1.585));
#3890 = CARTESIAN_POINT ('', (-7.25, 11., 1.585));
#3900 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3860, #3870), (#3880, #3890)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1., 1.), (0., 1.), .UNSPECIFIED.);
#3910 = ADVANCED_FACE ('', (#3850), #3900, .T.);
#3920 = ORIENTED_EDGE ('', *, *, #3770, .F.);
#3930 = CARTESIAN_POINT ('', (0., 0., -1.585));
#3940 = CARTESIAN_POINT ('', (-7.25, 3.22790796848689, -1.585));
#3950 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3930, #3940), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3960 = EDGE_CURVE ('', #2730, #3660, #3950, .T.);
#3970 = ORIENTED_EDGE ('', *, *, #3960, .F.);
#3980 = ORIENTED_EDGE ('', *, *, #2790, .T.);
#3990 = CARTESIAN_POINT ('', (0., 0., 1.585));
#4000 = CARTESIAN_POINT ('', (-7.25, 3.22790796848689, 1.585));
#4010 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3990, #4000), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4020 = EDGE_CURVE ('', #2750, #3730, #4010, .T.);
#4030 = ORIENTED_EDGE ('', *, *, #4020, .T.);
#4040 = EDGE_LOOP ('', (#3920, #3970, #3980, #4030));
#4050 = FACE_OUTER_BOUND ('', #4040, .T.);
#4060 = CARTESIAN_POINT ('', (0., 0., -1.585));
#4070 = CARTESIAN_POINT ('', (-7.25, 3.22790796848689, -1.585));
#4080 = CARTESIAN_POINT ('', (0., 0., 1.585));
#4090 = CARTESIAN_POINT ('', (-7.25, 3.22790796848689, 1.585));
#4100 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4060, #4070), (#4080, #4090)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1., 1.), (0., 1.), .UNSPECIFIED.);
#4110 = ADVANCED_FACE ('', (#4050), #4100, .T.);
#4120 = ORIENTED_EDGE ('', *, *, #2980, .F.);
#4130 = ORIENTED_EDGE ('', *, *, #3260, .F.);
#4140 = ORIENTED_EDGE ('', *, *, #3540, .F.);
#4150 = ORIENTED_EDGE ('', *, *, #3820, .F.);
#4160 = ORIENTED_EDGE ('', *, *, #4020, .F.);
#4170 = EDGE_LOOP ('', (#4120, #4130, #4140, #4150, #4160));
#4180 = FACE_OUTER_BOUND ('', #4170, .T.);
#4190 = CARTESIAN_POINT ('', (-7.25, 0., 1.585));
#4200 = CARTESIAN_POINT ('', (-7.25, 11., 1.585));
#4210 = CARTESIAN_POINT ('', (7.25, 0., 1.585));
#4220 = CARTESIAN_POINT ('', (7.25, 11., 1.585));
#4230 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4190, #4200), (#4210, #4220)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.137867604135274, 0.862132395864726), (0.225278872102622, 0.774721127897378), .UNSPECIFIED.);
#4240 = ADVANCED_FACE ('', (#4180), #4230, .T.);
#4250 = ORIENTED_EDGE ('', *, *, #2860, .T.);
#4260 = ORIENTED_EDGE ('', *, *, #3960, .T.);
#4270 = ORIENTED_EDGE ('', *, *, #3700, .T.);
#4280 = ORIENTED_EDGE ('', *, *, #3420, .T.);
#4290 = ORIENTED_EDGE ('', *, *, #3140, .T.);
#4300 = EDGE_LOOP ('', (#4250, #4260, #4270, #4280, #4290));
#4310 = FACE_OUTER_BOUND ('', #4300, .T.);
#4320 = CARTESIAN_POINT ('', (-7.25, 0., -1.585));
#4330 = CARTESIAN_POINT ('', (7.25, 0., -1.585));
#4340 = CARTESIAN_POINT ('', (-7.25, 11., -1.585));
#4350 = CARTESIAN_POINT ('', (7.25, 11., -1.585));
#4360 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4320, #4330), (#4340, #4350)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.225278872102622, 0.774721127897378), (0.137867604135274, 0.862132395864726), .UNSPECIFIED.);
#4370 = ADVANCED_FACE ('', (#4310), #4360, .T.);
#4380 = CLOSED_SHELL ('', (#3070, #3350, #3630, #3910, #4110, #4240, #4370));
#4390 = MANIFOLD_SOLID_BREP ('', #4380);
#4400 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#4410 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#4420 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#4430 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #4400, 'DISTANCE_ACCURACY_VALUE', '');
#4440 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#4430))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#4400, #4410, #4420))
   REPRESENTATION_CONTEXT ('', '3D')
);
#4450 = COLOUR_RGB ('', 1., 0.74901960784314, 0.);
#4460 = FILL_AREA_STYLE_COLOUR ('', #4450);
#4470 = FILL_AREA_STYLE ('', (#4460));
#4480 = SURFACE_STYLE_FILL_AREA (#4470);
#4490 = SURFACE_SIDE_STYLE ('', (#4480));
#4500 = SURFACE_STYLE_USAGE (.POSITIVE., #4490);
#4510 = PRESENTATION_STYLE_ASSIGNMENT ((#4500));
#4520 = STYLED_ITEM ('', (#4510), #4390);
#4530 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#4390), #4440);
#4540 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#4550 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #4540);
#4560 = MECHANICAL_CONTEXT ('', #4540, 'mechanical');
#4570 = PRODUCT ('product-name', '', '', (#4560));
#4580 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#4590 = PERSON ('', '', $, $, $, $);
#4600 = ORGANIZATION ($, '', '');
#4610 = PERSON_AND_ORGANIZATION (#4590, #4600);
#4620 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#4610, #4580, (#4570));
#4630 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#4570));
#4640 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #4570, .NOT_KNOWN.);
#4650 = APPROVAL_STATUS ('approved');
#4660 = APPROVAL (#4650, '');
#4670 = CALENDAR_DATE (2009, 10, 12);
#4680 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#4690 = LOCAL_TIME (16, 39, 49., #4680);
#4700 = DATE_AND_TIME (#4670, #4690);
#4710 = APPROVAL_DATE_TIME (#4700, #4660);
#4720 = APPROVAL_ROLE ('');
#4730 = PERSON ('', '', $, $, $, $);
#4740 = ORGANIZATION ($, '', '');
#4750 = PERSON_AND_ORGANIZATION (#4730, #4740);
#4760 = APPROVAL_PERSON_ORGANIZATION (#4750, #4660, #4720);
#4770 = CC_DESIGN_APPROVAL (#4660, (#4640));
#4780 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#4790 = PERSON ('', '', $, $, $, $);
#4800 = ORGANIZATION ($, '', '');
#4810 = PERSON_AND_ORGANIZATION (#4790, #4800);
#4820 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#4810, #4780, (#4640));
#4830 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#4840 = PERSON ('', '', $, $, $, $);
#4850 = ORGANIZATION ($, '', '');
#4860 = PERSON_AND_ORGANIZATION (#4840, #4850);
#4870 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#4860, #4830, (#4640));
#4880 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#4890 = SECURITY_CLASSIFICATION ('', '', #4880);
#4900 = APPROVAL_STATUS ('approved');
#4910 = APPROVAL (#4900, '');
#4920 = CALENDAR_DATE (2009, 10, 12);
#4930 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#4940 = LOCAL_TIME (16, 39, 49., #4930);
#4950 = DATE_AND_TIME (#4920, #4940);
#4960 = APPROVAL_DATE_TIME (#4950, #4910);
#4970 = APPROVAL_ROLE ('');
#4980 = PERSON ('', '', $, $, $, $);
#4990 = ORGANIZATION ($, '', '');
#5000 = PERSON_AND_ORGANIZATION (#4980, #4990);
#5010 = APPROVAL_PERSON_ORGANIZATION (#5000, #4910, #4970);
#5020 = CC_DESIGN_APPROVAL (#4910, (#4890));
#5030 = DATE_TIME_ROLE ('classification_date');
#5040 = CALENDAR_DATE (2009, 10, 12);
#5050 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#5060 = LOCAL_TIME (16, 39, 49., #5050);
#5070 = DATE_AND_TIME (#5040, #5060);
#5080 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#5070, #5030, (#4890));
#5090 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#5100 = PERSON ('', '', $, $, $, $);
#5110 = ORGANIZATION ($, '', '');
#5120 = PERSON_AND_ORGANIZATION (#5100, #5110);
#5130 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#5120, #5090, (#4890));
#5140 = CC_DESIGN_SECURITY_CLASSIFICATION (#4890, (#4640));
#5150 = DESIGN_CONTEXT ('', #4540, 'design');
#5160 = PRODUCT_DEFINITION ('', '', #4640, #5150);
#5170 = APPROVAL_STATUS ('approved');
#5180 = APPROVAL (#5170, '');
#5190 = CALENDAR_DATE (2009, 10, 12);
#5200 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#5210 = LOCAL_TIME (16, 39, 49., #5200);
#5220 = DATE_AND_TIME (#5190, #5210);
#5230 = APPROVAL_DATE_TIME (#5220, #5180);
#5240 = APPROVAL_ROLE ('');
#5250 = PERSON ('', '', $, $, $, $);
#5260 = ORGANIZATION ($, '', '');
#5270 = PERSON_AND_ORGANIZATION (#5250, #5260);
#5280 = APPROVAL_PERSON_ORGANIZATION (#5270, #5180, #5240);
#5290 = CC_DESIGN_APPROVAL (#5180, (#5160));
#5300 = DATE_TIME_ROLE ('creation_date');
#5310 = CALENDAR_DATE (2009, 10, 12);
#5320 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#5330 = LOCAL_TIME (16, 39, 49., #5320);
#5340 = DATE_AND_TIME (#5310, #5330);
#5350 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#5340, #5300, (#5160));
#5360 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#5370 = PERSON ('', '', $, $, $, $);
#5380 = ORGANIZATION ($, '', '');
#5390 = PERSON_AND_ORGANIZATION (#5370, #5380);
#5400 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#5390, #5360, (#5160));
#5410 = PRODUCT_DEFINITION_SHAPE ('', '', #5160);
#5420 = SHAPE_DEFINITION_REPRESENTATION (#5410, #4530);
ENDSEC;
END-ISO-10303-21;