ISO-10303-21;
HEADER;
FILE_DESCRIPTION ((), '1');
FILE_NAME ('C:\\TDMTemp\\Tools\\SMLIB\\inserts\\I02\\step\\LOMX 200504EN AM35C.stp', '2010-12-08T13:46:26', ('Unknown'), ('Unknown'), 'HarmonyWare STEP v1.4.4', 'HarmonyWare Translators', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;

DATA;
#10 = CARTESIAN_POINT ('', (-17.4771561430632, 2.22536382594065, -7.7107960418957));
#20 = VERTEX_POINT ('', #10);
#30 = CARTESIAN_POINT ('', (-15.6418431373979, 2.09999999999995, -7.34881158705083));
#40 = VERTEX_POINT ('', #30);
#50 = CARTESIAN_POINT ('', (-17.4771561430632, 2.22536382594065, -7.7107960418957));
#60 = CARTESIAN_POINT ('', (-15.6418431373979, 2.09999999999995, -7.34881158705083));
#70 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#50, #60), .UNSPECIFIED., .F., .U., (2, 2), (0.0307873647441199, 0.287626557118941), .UNSPECIFIED.);
#80 = EDGE_CURVE ('', #20, #40, #70, .T.);
#90 = ORIENTED_EDGE ('', *, *, #80, .F.);
#100 = CARTESIAN_POINT ('', (-18.6317167745197, 2.43797958008315, -6.12167966267117));
#110 = VERTEX_POINT ('', #100);
#120 = CARTESIAN_POINT ('', (-18.6317167745197, 2.43797958008315, -6.12167966267117));
#130 = CARTESIAN_POINT ('', (-17.4771561430632, 2.22536382594065, -7.7107960418957));
#140 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#120, #130), .UNSPECIFIED., .F., .U., (2, 2), (0.142746482955128, 0.400068917088755), .UNSPECIFIED.);
#150 = EDGE_CURVE ('', #110, #20, #140, .T.);
#160 = ORIENTED_EDGE ('', *, *, #150, .F.);
#170 = CARTESIAN_POINT ('', (-18.960017056571, 2.55000000034776, -4.9694011369975));
#180 = VERTEX_POINT ('', #170);
#190 = CARTESIAN_POINT ('', (-18.9600170565712, 2.5500000003478, -4.96940113699722));
#200 = CARTESIAN_POINT ('', (-19.1069691968935, 2.55592546379595, -5.05424524513273));
#210 = CARTESIAN_POINT ('', (-18.6317167745197, 2.43797958008315, -6.12167966267117));
#220 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#190, #200, #210), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (4.28881403093788E-7, 0.499999992609443), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.999999863624153, 0.920504920708988, 0.999999997649946))
   REPRESENTATION_ITEM ('')
);
#230 = EDGE_CURVE ('', #180, #110, #220, .T.);
#240 = ORIENTED_EDGE ('', *, *, #230, .F.);
#250 = CARTESIAN_POINT ('', (-13.2563386992903, 2.32001040937533, -1.67638090205043));
#260 = VERTEX_POINT ('', #250);
#270 = CARTESIAN_POINT ('', (-18.960017056571, 2.55000000034776, -4.9694011369975));
#280 = CARTESIAN_POINT ('', (-13.2563386992903, 2.32001040937533, -1.67638090205043));
#290 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#270, #280), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#300 = EDGE_CURVE ('', #180, #260, #290, .T.);
#310 = ORIENTED_EDGE ('', *, *, #300, .T.);
#320 = CARTESIAN_POINT ('', (-12.2103466684532, 2.09999999999998, -3.4880922437724));
#330 = VERTEX_POINT ('', #320);
#340 = CARTESIAN_POINT ('', (-13.2563386992903, 2.32001040937533, -1.67638090205042));
#350 = CARTESIAN_POINT ('', (-12.2103466684532, 2.09999999999998, -3.4880922437724));
#360 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#340, #350), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.27274889982714), .UNSPECIFIED.);
#370 = EDGE_CURVE ('', #260, #330, #360, .T.);
#380 = ORIENTED_EDGE ('', *, *, #370, .T.);
#390 = CARTESIAN_POINT ('', (-15.6418431373979, 2.09999999999995, -7.34881158705083));
#400 = CARTESIAN_POINT ('', (-12.2103466684532, 2.09999999999998, -3.4880922437724));
#410 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#390, #400), .UNSPECIFIED., .F., .U., (2, 2), (0.299588820276331, 0.997085217335847), .UNSPECIFIED.);
#420 = EDGE_CURVE ('', #40, #330, #410, .T.);
#430 = ORIENTED_EDGE ('', *, *, #420, .F.);
#440 = EDGE_LOOP ('', (#90, #160, #240, #310, #380, #430));
#450 = FACE_OUTER_BOUND ('', #440, .T.);
#460 = CARTESIAN_POINT ('', (-19.2090516430039, 2.56004182933672, -5.11318132251168));
#470 = CARTESIAN_POINT ('', (-17.3610094708968, 2.16932199487547, -8.34137273247817));
#480 = CARTESIAN_POINT ('', (-13.2496931885455, 2.31974244224918, -1.67254411463264));
#490 = CARTESIAN_POINT ('', (-11.4016510164384, 1.92902260778793, -4.90073552459913));
#500 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#460, #470), (#480, #490)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.253056741205777, 0.550507855986534), (0.223192583075223, 0.384768867244795), .UNSPECIFIED.);
#510 = ADVANCED_FACE ('', (#450), #500, .T.);
#520 = CARTESIAN_POINT ('', (-16.1705003741476, 0.14999999999995, -9.50925341851044));
#530 = VERTEX_POINT ('', #520);
#540 = CARTESIAN_POINT ('', (-16.1705003741476, 0.149999999999953, -9.50925341851044));
#550 = CARTESIAN_POINT ('', (-17.4771561430632, 2.22536382594065, -7.7107960418957));
#560 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#540, #550), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.907072704672142), .UNSPECIFIED.);
#570 = EDGE_CURVE ('', #530, #20, #560, .T.);
#580 = ORIENTED_EDGE ('', *, *, #570, .F.);
#590 = CARTESIAN_POINT ('', (-16.1705003741476, -0.150000000000049, -9.50925341851044));
#600 = VERTEX_POINT ('', #590);
#610 = CARTESIAN_POINT ('', (-16.1705003741476, -0.150000000000049, -9.50925341851044));
#620 = CARTESIAN_POINT ('', (-16.1705003741476, 0.14999999999995, -9.50925341851044));
#630 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#610, #620), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#640 = EDGE_CURVE ('', #600, #530, #630, .T.);
#650 = ORIENTED_EDGE ('', *, *, #640, .F.);
#660 = CARTESIAN_POINT ('', (-17.477156150367, -2.22536383754139, -7.71079603184288));
#670 = VERTEX_POINT ('', #660);
#680 = CARTESIAN_POINT ('', (-17.477156150367, -2.22536383754139, -7.71079603184288));
#690 = CARTESIAN_POINT ('', (-16.1705003741476, -0.15000000000005, -9.50925341851044));
#700 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#680, #690), .UNSPECIFIED., .F., .U., (2, 2), (0.0929272943623073, 1.), .UNSPECIFIED.);
#710 = EDGE_CURVE ('', #670, #600, #700, .T.);
#720 = ORIENTED_EDGE ('', *, *, #710, .F.);
#730 = CARTESIAN_POINT ('', (-18.6317167732753, -2.43797959043687, -6.12167966438396));
#740 = VERTEX_POINT ('', #730);
#750 = CARTESIAN_POINT ('', (-17.477156150367, -2.22536383754139, -7.71079603184288));
#760 = CARTESIAN_POINT ('', (-18.6317167732753, -2.43797959043687, -6.12167966438396));
#770 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#750, #760), .UNSPECIFIED., .F., .U., (2, 2), (0.599931081871764, 0.857253512956145), .UNSPECIFIED.);
#780 = EDGE_CURVE ('', #670, #740, #770, .T.);
#790 = ORIENTED_EDGE ('', *, *, #780, .T.);
#800 = CARTESIAN_POINT ('', (-19.3185165257813, -2.1502436509206, -5.17638090205043));
#810 = VERTEX_POINT ('', #800);
#820 = CARTESIAN_POINT ('', (-19.3185165257812, -2.15024367030142, -5.17638090205066));
#830 = CARTESIAN_POINT ('', (-19.3185165257812, -2.32003359678525, -5.17638090205066));
#840 = CARTESIAN_POINT ('', (-18.6317167732753, -2.43797959043687, -6.12167966438396));
#850 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#820, #830, #840), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 0.499999984499551), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.920504851183939, 0.999999995071158))
   REPRESENTATION_ITEM ('')
);
#860 = EDGE_CURVE ('', #810, #740, #850, .T.);
#870 = ORIENTED_EDGE ('', *, *, #860, .F.);
#880 = CARTESIAN_POINT ('', (-19.3185165257815, 2.15024365092046, -5.17638090205048));
#890 = VERTEX_POINT ('', #880);
#900 = CARTESIAN_POINT ('', (-19.3185165257813, -2.1502436509206, -5.17638090205043));
#910 = CARTESIAN_POINT ('', (-19.3185165257814, 2.15024365092046, -5.17638090205044));
#920 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#900, #910), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#930 = EDGE_CURVE ('', #810, #890, #920, .T.);
#940 = ORIENTED_EDGE ('', *, *, #930, .T.);
#950 = CARTESIAN_POINT ('', (-18.6317167745197, 2.43797958008315, -6.12167966267117));
#960 = CARTESIAN_POINT ('', (-18.6317170456595, 2.43797953351957, -6.12167928947923));
#970 = CARTESIAN_POINT ('', (-18.6317173167993, 2.43797948695598, -6.12167891628741));
#980 = CARTESIAN_POINT ('', (-19.3185165257817, 2.32003350735522, -5.17638090205012));
#990 = CARTESIAN_POINT ('', (-19.3185165257817, 2.15024366016131, -5.17638090205012));
#1000 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#950, #960, #970, #980, #990), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0.499999785559285, 0.5, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.999999931812101, 0.999999965906036, 1., 0.920504919080317, 1.))
   REPRESENTATION_ITEM ('')
);
#1010 = EDGE_CURVE ('', #110, #890, #1000, .T.);
#1020 = ORIENTED_EDGE ('', *, *, #1010, .F.);
#1030 = ORIENTED_EDGE ('', *, *, #150, .T.);
#1040 = EDGE_LOOP ('', (#580, #650, #720, #790, #870, #940, #1020, #1030));
#1050 = FACE_OUTER_BOUND ('', #1040, .T.);
#1060 = CARTESIAN_POINT ('', (-19.3185165257816, -2.43797959043687, -5.17638090205011));
#1070 = CARTESIAN_POINT ('', (-16.1705003741476, -2.43797959043686, -9.50925341851044));
#1080 = CARTESIAN_POINT ('', (-19.3185165257817, 2.43797958008315, -5.17638090205012));
#1090 = CARTESIAN_POINT ('', (-16.1705003741476, 2.43797958008316, -9.50925341851045));
#1100 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1060, #1070), (#1080, #1090)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.358319515889882, 0.527052957520773), (0.280088909354733, 0.465424732462961), .UNSPECIFIED.);
#1110 = ADVANCED_FACE ('', (#1050), #1100, .T.);
#1120 = CARTESIAN_POINT ('', (-13.2563386992903, 2.09999999999998, -1.67638090205043));
#1130 = VERTEX_POINT ('', #1120);
#1140 = CARTESIAN_POINT ('', (-12.2103466684532, 2.09999999999998, -3.4880922437724));
#1150 = CARTESIAN_POINT ('', (-13.2563386992903, 2.09999999999998, -1.67638090205043));
#1160 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1140, #1150), .UNSPECIFIED., .F., .U., (2, 2), (0.717978573296951, 1.), .UNSPECIFIED.);
#1170 = EDGE_CURVE ('', #330, #1130, #1160, .T.);
#1180 = ORIENTED_EDGE ('', *, *, #1170, .F.);
#1190 = ORIENTED_EDGE ('', *, *, #370, .F.);
#1200 = CARTESIAN_POINT ('', (-13.2563386992903, 2.32001040937533, -1.67638090205043));
#1210 = CARTESIAN_POINT ('', (-13.2563386992903, 2.09999999999998, -1.67638090205043));
#1220 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1200, #1210), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.0474158237580032), .UNSPECIFIED.);
#1230 = EDGE_CURVE ('', #260, #1130, #1220, .T.);
#1240 = ORIENTED_EDGE ('', *, *, #1230, .T.);
#1250 = EDGE_LOOP ('', (#1180, #1190, #1240));
#1260 = FACE_OUTER_BOUND ('', #1250, .T.);
#1270 = CARTESIAN_POINT ('', (-13.2563386992903, 2.32001040937533, -1.67638090205043));
#1280 = CARTESIAN_POINT ('', (-12.2103466684532, 2.32001040937533, -3.4880922437724));
#1290 = CARTESIAN_POINT ('', (-13.2563386992903, 2.09999999999998, -1.67638090205043));
#1300 = CARTESIAN_POINT ('', (-12.2103466684532, 2.09999999999998, -3.4880922437724));
#1310 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1270, #1280), (#1290, #1300)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 0.0474158237580033), (0., 0.27274889982714), .UNSPECIFIED.);
#1320 = ADVANCED_FACE ('', (#1260), #1310, .T.);
#1330 = ORIENTED_EDGE ('', *, *, #930, .F.);
#1340 = CARTESIAN_POINT ('', (-18.9600167878493, -2.54999999965224, -4.96940098185098));
#1350 = VERTEX_POINT ('', #1340);
#1360 = CARTESIAN_POINT ('', (-19.3185165257813, -2.1502436509206, -5.17638090205043));
#1370 = CARTESIAN_POINT ('', (-19.3185165329059, -2.3200335954388, -5.17638090616377));
#1380 = CARTESIAN_POINT ('', (-19.2127430756096, -2.43797959820403, -5.11531257212067));
#1390 = CARTESIAN_POINT ('', (-19.1069696183134, -2.55592560096926, -5.05424423807757));
#1400 = CARTESIAN_POINT ('', (-18.9600167878493, -2.54999999965224, -4.96940098185098));
#1410 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1360, #1370, #1380, #1390, #1400), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 0.5, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.920504838525499, 1., 0.920504838525499, 1.))
   REPRESENTATION_ITEM ('')
);
#1420 = EDGE_CURVE ('', #810, #1350, #1410, .T.);
#1430 = ORIENTED_EDGE ('', *, *, #1420, .T.);
#1440 = CARTESIAN_POINT ('', (-13.2563386992903, -2.32001040937537, -1.67638090205042));
#1450 = VERTEX_POINT ('', #1440);
#1460 = CARTESIAN_POINT ('', (-18.9600167878493, -2.54999999965224, -4.96940098185098));
#1470 = CARTESIAN_POINT ('', (-13.2563386992903, -2.32001040937537, -1.67638090205042));
#1480 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1460, #1470), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1490 = EDGE_CURVE ('', #1350, #1450, #1480, .T.);
#1500 = ORIENTED_EDGE ('', *, *, #1490, .T.);
#1510 = CARTESIAN_POINT ('', (-13.2563386992903, -2.10000000000002, -1.67638090205042));
#1520 = VERTEX_POINT ('', #1510);
#1530 = CARTESIAN_POINT ('', (-13.2563386992903, -2.10000000000002, -1.67638090205042));
#1540 = CARTESIAN_POINT ('', (-13.2563386992903, -2.32001040937537, -1.67638090205042));
#1550 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1530, #1540), .UNSPECIFIED., .F., .U., (2, 2), (0.952584176241998, 1.), .UNSPECIFIED.);
#1560 = EDGE_CURVE ('', #1520, #1450, #1550, .T.);
#1570 = ORIENTED_EDGE ('', *, *, #1560, .F.);
#1580 = CARTESIAN_POINT ('', (-12.3594736081478, -2.10000000000002, -1.15857560025253));
#1590 = VERTEX_POINT ('', #1580);
#1600 = CARTESIAN_POINT ('', (-13.2563386992903, -2.10000000000002, -1.67638090205042));
#1610 = CARTESIAN_POINT ('', (-12.3594736081478, -2.10000000000002, -1.15857560025252));
#1620 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1600, #1610), .UNSPECIFIED., .F., .U., (2, 2), (0.871122350909791, 1.), .UNSPECIFIED.);
#1630 = EDGE_CURVE ('', #1520, #1590, #1620, .T.);
#1640 = ORIENTED_EDGE ('', *, *, #1630, .T.);
#1650 = CARTESIAN_POINT ('', (-12.3594736081478, 2.09999999999998, -1.15857560025253));
#1660 = VERTEX_POINT ('', #1650);
#1670 = CARTESIAN_POINT ('', (-12.3594736081478, 2.09999999999999, -1.15857560025253));
#1680 = CARTESIAN_POINT ('', (-12.3594736081478, -2.10000000000002, -1.15857560025252));
#1690 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1670, #1680), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1700 = EDGE_CURVE ('', #1660, #1590, #1690, .T.);
#1710 = ORIENTED_EDGE ('', *, *, #1700, .F.);
#1720 = CARTESIAN_POINT ('', (-13.2563386992903, 2.09999999999998, -1.67638090205043));
#1730 = CARTESIAN_POINT ('', (-12.3594736081478, 2.09999999999999, -1.15857560025253));
#1740 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1720, #1730), .UNSPECIFIED., .F., .U., (2, 2), (0.871122350909791, 1.), .UNSPECIFIED.);
#1750 = EDGE_CURVE ('', #1130, #1660, #1740, .T.);
#1760 = ORIENTED_EDGE ('', *, *, #1750, .F.);
#1770 = ORIENTED_EDGE ('', *, *, #1230, .F.);
#1780 = ORIENTED_EDGE ('', *, *, #300, .F.);
#1790 = CARTESIAN_POINT ('', (-18.960017056571, 2.55000000034776, -4.9694011369975));
#1800 = CARTESIAN_POINT ('', (-19.1069698091441, 2.55592546665185, -5.0542443482537));
#1810 = CARTESIAN_POINT ('', (-19.2127431691612, 2.43797948374634, -5.11531262613271));
#1820 = CARTESIAN_POINT ('', (-19.3185165291784, 2.32003350084083, -5.17638090401173));
#1830 = CARTESIAN_POINT ('', (-19.3185165257815, 2.15024365092046, -5.17638090205048));
#1840 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1790, #1800, #1810, #1820, #1830), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 0.5, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.920504916823648, 1., 0.920504916823648, 1.))
   REPRESENTATION_ITEM ('')
);
#1850 = EDGE_CURVE ('', #180, #890, #1840, .T.);
#1860 = ORIENTED_EDGE ('', *, *, #1850, .T.);
#1870 = EDGE_LOOP ('', (#1330, #1430, #1500, #1570, #1640, #1710, #1760, #1770, #1780, #1860));
#1880 = FACE_OUTER_BOUND ('', #1870, .T.);
#1890 = CARTESIAN_POINT ('', (-19.3185165329059, 2.55592546665185, -5.17638090616378));
#1900 = CARTESIAN_POINT ('', (-12.3594736081478, 2.55592546665191, -1.15857560025253));
#1910 = CARTESIAN_POINT ('', (-19.3185165329058, -2.55592560096927, -5.17638090616377));
#1920 = CARTESIAN_POINT ('', (-12.3594736081478, -2.55592560096921, -1.15857560025252));
#1930 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1890, #1900), (#1910, #1920)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.231931450278839, 0.768068549721161), (0.132915782281058, 0.975700305671977), .UNSPECIFIED.);
#1940 = ADVANCED_FACE ('', (#1880), #1930, .T.);
#1950 = ORIENTED_EDGE ('', *, *, #860, .T.);
#1960 = CARTESIAN_POINT ('', (-18.6317167732753, -2.43797959043687, -6.12167966438396));
#1970 = CARTESIAN_POINT ('', (-19.106969639369, -2.5559255840885, -5.05424425023404));
#1980 = CARTESIAN_POINT ('', (-18.9600168239781, -2.55000000110906, -4.96940100270993));
#1990 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1960, #1970, #1980), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0.500000015500412, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.99999999507117, 0.920504851183924, 1.))
   REPRESENTATION_ITEM ('')
);
#2000 = EDGE_CURVE ('', #740, #1350, #1990, .T.);
#2010 = ORIENTED_EDGE ('', *, *, #2000, .T.);
#2020 = ORIENTED_EDGE ('', *, *, #1420, .F.);
#2030 = EDGE_LOOP ('', (#1950, #2010, #2020));
#2040 = FACE_OUTER_BOUND ('', #2030, .T.);
#2050 = CARTESIAN_POINT ('', (-19.3185165257813, -2.1502436509206, -5.17638090205043));
#2060 = CARTESIAN_POINT ('', (-19.3185165329059, -2.3200335954388, -5.17638090616377));
#2070 = CARTESIAN_POINT ('', (-19.2127430756096, -2.43797959820403, -5.11531257212067));
#2080 = CARTESIAN_POINT ('', (-19.1069696183134, -2.55592560096926, -5.05424423807757));
#2090 = CARTESIAN_POINT ('', (-18.9600167878493, -2.54999999965224, -4.96940098185098));
#2100 = CARTESIAN_POINT ('', (-18.7374902164814, -2.1502436509206, -6.18274799029215));
#2110 = CARTESIAN_POINT ('', (-18.7374902236059, -2.3200335954388, -6.18274799440548));
#2120 = CARTESIAN_POINT ('', (-18.6317167663097, -2.43797959820403, -6.12167966036239));
#2130 = CARTESIAN_POINT ('', (-18.5259433090135, -2.55592560096926, -6.06061132631929));
#2140 = CARTESIAN_POINT ('', (-18.3789904785494, -2.54999999965223, -5.9757680700927));
#2150 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#2050, #2060, #2070, #2080, #2090), (#2100, #2110, #2120, #2130, #2140)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 2, 3), (0., 0.151506208422408), (0., 0.5, 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.920504838525499, 1., 0.920504838525499, 1.), (1., 0.920504838525499, 1., 0.920504838525499, 1.)))
   REPRESENTATION_ITEM ('')
);
#2160 = ADVANCED_FACE ('', (#2040), #2150, .T.);
#2170 = CARTESIAN_POINT ('', (-15.6418430181214, -2.10000000000005, -7.34881155509077));
#2180 = VERTEX_POINT ('', #2170);
#2190 = CARTESIAN_POINT ('', (-15.6418430181214, -2.10000000000005, -7.34881155509077));
#2200 = CARTESIAN_POINT ('', (-17.477156150367, -2.22536383754139, -7.71079603184288));
#2210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2190, #2200), .UNSPECIFIED., .F., .U., (2, 2), (0.71237342558956, 0.969212635441775), .UNSPECIFIED.);
#2220 = EDGE_CURVE ('', #2180, #670, #2210, .T.);
#2230 = ORIENTED_EDGE ('', *, *, #2220, .F.);
#2240 = CARTESIAN_POINT ('', (-12.2103466685094, -2.10000000000002, -3.48809224367508));
#2250 = VERTEX_POINT ('', #2240);
#2260 = CARTESIAN_POINT ('', (-12.2103466685094, -2.10000000000002, -3.48809224367508));
#2270 = CARTESIAN_POINT ('', (-15.6418430181214, -2.10000000000005, -7.34881155509077));
#2280 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2260, #2270), .UNSPECIFIED., .F., .U., (2, 2), (0.0029147827905314, 0.70041116231729), .UNSPECIFIED.);
#2290 = EDGE_CURVE ('', #2250, #2180, #2280, .T.);
#2300 = ORIENTED_EDGE ('', *, *, #2290, .F.);
#2310 = CARTESIAN_POINT ('', (-12.2103466685094, -2.10000000000002, -3.48809224367508));
#2320 = CARTESIAN_POINT ('', (-13.2563386992903, -2.32001040937537, -1.67638090205041));
#2330 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2310, #2320), .UNSPECIFIED., .F., .U., (2, 2), (0.727251100187509, 1.), .UNSPECIFIED.);
#2340 = EDGE_CURVE ('', #2250, #1450, #2330, .T.);
#2350 = ORIENTED_EDGE ('', *, *, #2340, .T.);
#2360 = ORIENTED_EDGE ('', *, *, #1490, .F.);
#2370 = ORIENTED_EDGE ('', *, *, #2000, .F.);
#2380 = ORIENTED_EDGE ('', *, *, #780, .F.);
#2390 = EDGE_LOOP ('', (#2230, #2300, #2350, #2360, #2370, #2380));
#2400 = FACE_OUTER_BOUND ('', #2390, .T.);
#2410 = CARTESIAN_POINT ('', (-13.249693188253, -2.31974244222559, -1.67254411446415));
#2420 = CARTESIAN_POINT ('', (-11.4016510007879, -1.92902260442825, -4.9007355524676));
#2430 = CARTESIAN_POINT ('', (-19.2090516426428, -2.56004183990502, -5.11318132230357));
#2440 = CARTESIAN_POINT ('', (-17.3610094551777, -2.16932200210768, -8.34137276030702));
#2450 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2410, #2420), (#2430, #2440)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.449492046747587, 0.74694331434858), (0.223192513635863, 0.384768882199261), .UNSPECIFIED.);
#2460 = ADVANCED_FACE ('', (#2400), #2450, .T.);
#2470 = ORIENTED_EDGE ('', *, *, #2290, .T.);
#2480 = CARTESIAN_POINT ('', (-2.09787721325812, -2.1, -3.71971685536293));
#2490 = VERTEX_POINT ('', #2480);
#2500 = CARTESIAN_POINT ('', (-2.09787721325812, -2.1, -3.71971685536293));
#2510 = CARTESIAN_POINT ('', (-15.6418430181214, -2.1, -7.34881155509079));
#2520 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2500, #2510), .UNSPECIFIED., .F., .U., (2, 2), (0.195854506413998, 1.8041454794224), .UNSPECIFIED.);
#2530 = EDGE_CURVE ('', #2490, #2180, #2520, .T.);
#2540 = ORIENTED_EDGE ('', *, *, #2530, .F.);
#2550 = CARTESIAN_POINT ('', (-7., -2.1, -2.09198406167416));
#2560 = VERTEX_POINT ('', #2550);
#2570 = CARTESIAN_POINT ('', (-2.09787721325812, -2.1, -3.71971685536293));
#2580 = CARTESIAN_POINT ('', (-7., -2.1, -2.09198406167416));
#2590 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2570, #2580), .UNSPECIFIED., .F., .U., (2, 2), (0.299588820276331, 0.997085217335847), .UNSPECIFIED.);
#2600 = EDGE_CURVE ('', #2490, #2560, #2590, .T.);
#2610 = ORIENTED_EDGE ('', *, *, #2600, .T.);
#2620 = CARTESIAN_POINT ('', (-7., -2.1, 0.));
#2630 = VERTEX_POINT ('', #2620);
#2640 = CARTESIAN_POINT ('', (-7., -2.1, -2.09198406167416));
#2650 = CARTESIAN_POINT ('', (-7., -2.1, 0.));
#2660 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2640, #2650), .UNSPECIFIED., .F., .U., (2, 2), (0.717978573296951, 1.), .UNSPECIFIED.);
#2670 = EDGE_CURVE ('', #2560, #2630, #2660, .T.);
#2680 = ORIENTED_EDGE ('', *, *, #2670, .T.);
#2690 = CARTESIAN_POINT ('', (-8.03561060359578, -2.1, 0.));
#2700 = VERTEX_POINT ('', #2690);
#2710 = CARTESIAN_POINT ('', (-7., -2.1, 0.));
#2720 = CARTESIAN_POINT ('', (-8.03561060359578, -2.1, 0.));
#2730 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2710, #2720), .UNSPECIFIED., .F., .U., (2, 2), (0.871122350909791, 1.), .UNSPECIFIED.);
#2740 = EDGE_CURVE ('', #2630, #2700, #2730, .T.);
#2750 = ORIENTED_EDGE ('', *, *, #2740, .T.);
#2760 = CARTESIAN_POINT ('', (-8.61825523265811, -2.1, -1.00917010029308));
#2770 = VERTEX_POINT ('', #2760);
#2780 = CARTESIAN_POINT ('', (-8.03561060359578, -2.1, 0.));
#2790 = CARTESIAN_POINT ('', (-8.61825523265811, -2.1, -1.00917010029308));
#2800 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2780, #2790), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2810 = EDGE_CURVE ('', #2700, #2770, #2800, .T.);
#2820 = ORIENTED_EDGE ('', *, *, #2810, .T.);
#2830 = CARTESIAN_POINT ('', (-9.83266702310937, -2.1, -1.94102014741153));
#2840 = VERTEX_POINT ('', #2830);
#2850 = CARTESIAN_POINT ('', (-8.61825523265811, -2.1, -1.00917010029308));
#2860 = CARTESIAN_POINT ('', (-9.0324689170608, -2.1, -1.72660771111179));
#2870 = CARTESIAN_POINT ('', (-9.83266702310915, -2.1, -1.94102014741236));
#2880 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2850, #2860, #2870), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.923879709868231, 1.))
   REPRESENTATION_ITEM ('')
);
#2890 = EDGE_CURVE ('', #2770, #2840, #2880, .T.);
#2900 = ORIENTED_EDGE ('', *, *, #2890, .T.);
#2910 = CARTESIAN_POINT ('', (-11.3503035078547, -2.10000000000001, -1.74122022931485));
#2920 = VERTEX_POINT ('', #2910);
#2930 = CARTESIAN_POINT ('', (-11.3503035078547, -2.10000000000001, -1.74122022931485));
#2940 = CARTESIAN_POINT ('', (-10.6328651291575, -2.10000000000001, -2.15543258371293));
#2950 = CARTESIAN_POINT ('', (-9.83266702310913, -2.1, -1.94102014741236));
#2960 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2930, #2940, #2950), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.923879709868231, 1.))
   REPRESENTATION_ITEM ('')
);
#2970 = EDGE_CURVE ('', #2920, #2840, #2960, .T.);
#2980 = ORIENTED_EDGE ('', *, *, #2970, .F.);
#2990 = CARTESIAN_POINT ('', (-12.3594736081478, -2.10000000000002, -1.15857560025252));
#3000 = CARTESIAN_POINT ('', (-11.3503035078547, -2.10000000000001, -1.74122022931485));
#3010 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2990, #3000), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3020 = EDGE_CURVE ('', #1590, #2920, #3010, .T.);
#3030 = ORIENTED_EDGE ('', *, *, #3020, .F.);
#3040 = ORIENTED_EDGE ('', *, *, #1630, .F.);
#3050 = CARTESIAN_POINT ('', (-13.2563386992903, -2.10000000000002, -1.67638090205041));
#3060 = CARTESIAN_POINT ('', (-12.2103466685094, -2.10000000000002, -3.48809224367508));
#3070 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3050, #3060), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.27274889981249), .UNSPECIFIED.);
#3080 = EDGE_CURVE ('', #1520, #2250, #3070, .T.);
#3090 = ORIENTED_EDGE ('', *, *, #3080, .T.);
#3100 = EDGE_LOOP ('', (#2470, #2540, #2610, #2680, #2750, #2820, #2900, #2980, #3030, #3040, #3090));
#3110 = FACE_OUTER_BOUND ('', #3100, .T.);
#3120 = CARTESIAN_POINT ('', (-13.8272956682574, -2.10000000000004, -10.4916997577946));
#3130 = CARTESIAN_POINT ('', (-17.5017014617828, -2.10000000000006, -4.12744223578312));
#3140 = CARTESIAN_POINT ('', (-2.09787721325813, -2.09999999999995, -3.71971685536292));
#3150 = CARTESIAN_POINT ('', (-5.77228300678355, -2.09999999999996, 2.64454066664852));
#3160 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3120, #3130), (#3140, #3150)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.352385157775437, 1.27311947118005), (0.252555305505346, 0.752135937089154), .UNSPECIFIED.);
#3170 = ADVANCED_FACE ('', (#3110), #3160, .T.);
#3180 = CARTESIAN_POINT ('', (-11.3503035078547, 2.09999999999999, -1.74122022931486));
#3190 = VERTEX_POINT ('', #3180);
#3200 = CARTESIAN_POINT ('', (-9.83266702310915, 2.1, -1.94102014741236));
#3210 = VERTEX_POINT ('', #3200);
#3220 = CARTESIAN_POINT ('', (-11.3503035078547, 2.09999999999999, -1.74122022931486));
#3230 = CARTESIAN_POINT ('', (-10.6328651291575, 2.09999999999999, -2.15543258371294));
#3240 = CARTESIAN_POINT ('', (-9.83266702310916, 2.1, -1.94102014741237));
#3250 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#3220, #3230, #3240), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.923879709868231, 1.))
   REPRESENTATION_ITEM ('')
);
#3260 = EDGE_CURVE ('', #3190, #3210, #3250, .T.);
#3270 = ORIENTED_EDGE ('', *, *, #3260, .F.);
#3280 = CARTESIAN_POINT ('', (-11.3503035078547, 2.09999999999999, -1.74122022931486));
#3290 = CARTESIAN_POINT ('', (-11.3503035078547, -2.10000000000001, -1.74122022931485));
#3300 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#3280, #3290), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#3310 = EDGE_CURVE ('', #3190, #2920, #3300, .T.);
#3320 = ORIENTED_EDGE ('', *, *, #3310, .T.);
#3330 = ORIENTED_EDGE ('', *, *, #2970, .T.);
#3340 = CARTESIAN_POINT ('', (-9.83266702310915, -2.1, -1.94102014741236));
#3350 = CARTESIAN_POINT ('', (-9.83266702310915, 2.1, -1.94102014741236));
#3360 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#3340, #3350), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#3370 = EDGE_CURVE ('', #2840, #3210, #3360, .T.);
#3380 = ORIENTED_EDGE ('', *, *, #3370, .T.);
#3390 = EDGE_LOOP ('', (#3270, #3320, #3330, #3380));
#3400 = FACE_OUTER_BOUND ('', #3390, .T.);
#3410 = CARTESIAN_POINT ('', (-11.3503035078547, 2.09999999999999, -1.74122022931486));
#3420 = CARTESIAN_POINT ('', (-10.6328651291575, 2.09999999999999, -2.15543258371294));
#3430 = CARTESIAN_POINT ('', (-9.83266702310916, 2.1, -1.94102014741237));
#3440 = CARTESIAN_POINT ('', (-11.3503035078547, -2.10000000000001, -1.74122022931485));
#3450 = CARTESIAN_POINT ('', (-10.6328651291575, -2.10000000000001, -2.15543258371293));
#3460 = CARTESIAN_POINT ('', (-9.83266702310913, -2.1, -1.94102014741236));
#3470 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#3410, #3420, #3430), (#3440, #3450, #3460)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 3), (0., 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.923879709868231, 1.), (1., 0.923879709868231, 1.)))
   REPRESENTATION_ITEM ('')
);
#3480 = ADVANCED_FACE ('', (#3400), #3470, .T.);
#3490 = CARTESIAN_POINT ('', (-12.3594736081478, 2.09999999999999, -1.15857560025253));
#3500 = CARTESIAN_POINT ('', (-11.3503035078547, 2.09999999999999, -1.74122022931486));
#3510 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3490, #3500), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3520 = EDGE_CURVE ('', #1660, #3190, #3510, .T.);
#3530 = ORIENTED_EDGE ('', *, *, #3520, .F.);
#3540 = ORIENTED_EDGE ('', *, *, #1700, .T.);
#3550 = ORIENTED_EDGE ('', *, *, #3020, .T.);
#3560 = ORIENTED_EDGE ('', *, *, #3310, .F.);
#3570 = EDGE_LOOP ('', (#3530, #3540, #3550, #3560));
#3580 = FACE_OUTER_BOUND ('', #3570, .T.);
#3590 = CARTESIAN_POINT ('', (-12.3594736081478, 2.09999999999999, -1.15857560025253));
#3600 = CARTESIAN_POINT ('', (-11.3503035078547, 2.09999999999999, -1.74122022931486));
#3610 = CARTESIAN_POINT ('', (-12.3594736081478, -2.10000000000002, -1.15857560025252));
#3620 = CARTESIAN_POINT ('', (-11.3503035078547, -2.10000000000001, -1.74122022931485));
#3630 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3590, #3600), (#3610, #3620)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#3640 = ADVANCED_FACE ('', (#3580), #3630, .T.);
#3650 = ORIENTED_EDGE ('', *, *, #3080, .F.);
#3660 = ORIENTED_EDGE ('', *, *, #1560, .T.);
#3670 = ORIENTED_EDGE ('', *, *, #2340, .F.);
#3680 = EDGE_LOOP ('', (#3650, #3660, #3670));
#3690 = FACE_OUTER_BOUND ('', #3680, .T.);
#3700 = CARTESIAN_POINT ('', (-13.2563386992903, -2.10000000000002, -1.67638090205042));
#3710 = CARTESIAN_POINT ('', (-12.2103466684532, -2.10000000000002, -3.48809224377239));
#3720 = CARTESIAN_POINT ('', (-13.2563386992903, -2.32001040937537, -1.67638090205042));
#3730 = CARTESIAN_POINT ('', (-12.2103466684532, -2.32001040937536, -3.48809224377239));
#3740 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3700, #3710), (#3720, #3730)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.952584176241998, 1.), (0., 0.27274889982714), .UNSPECIFIED.);
#3750 = ADVANCED_FACE ('', (#3690), #3740, .T.);
#3760 = ORIENTED_EDGE ('', *, *, #1010, .T.);
#3770 = ORIENTED_EDGE ('', *, *, #1850, .F.);
#3780 = ORIENTED_EDGE ('', *, *, #230, .T.);
#3790 = EDGE_LOOP ('', (#3760, #3770, #3780));
#3800 = FACE_OUTER_BOUND ('', #3790, .T.);
#3810 = CARTESIAN_POINT ('', (-18.960017056571, 2.55000000034776, -4.9694011369975));
#3820 = CARTESIAN_POINT ('', (-19.1069698091441, 2.55592546665185, -5.0542443482537));
#3830 = CARTESIAN_POINT ('', (-19.2127431691612, 2.43797948374634, -5.11531262613271));
#3840 = CARTESIAN_POINT ('', (-19.3185165291784, 2.32003350084083, -5.17638090401173));
#3850 = CARTESIAN_POINT ('', (-19.3185165257815, 2.15024365092046, -5.17638090205048));
#3860 = CARTESIAN_POINT ('', (-18.3789907483238, 2.55000000034776, -5.97576822341576));
#3870 = CARTESIAN_POINT ('', (-18.5259435008969, 2.55592546665185, -6.06061143467197));
#3880 = CARTESIAN_POINT ('', (-18.6317168609141, 2.43797948374634, -6.12167971255098));
#3890 = CARTESIAN_POINT ('', (-18.7374902209313, 2.32003350084083, -6.18274799042999));
#3900 = CARTESIAN_POINT ('', (-18.7374902175343, 2.15024365092046, -6.18274798846875));
#3910 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#3810, #3820, #3830, #3840, #3850), (#3860, #3870, #3880, #3890, #3900)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 2, 3), (0., 0.151506208147892), (0., 0.5, 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.920504916823648, 1., 0.920504916823648, 1.), (1., 0.920504916823648, 1., 0.920504916823648, 1.)))
   REPRESENTATION_ITEM ('')
);
#3920 = ADVANCED_FACE ('', (#3800), #3910, .T.);
#3930 = ORIENTED_EDGE ('', *, *, #2890, .F.);
#3940 = CARTESIAN_POINT ('', (-8.61825523265811, 2.1, -1.00917010029308));
#3950 = VERTEX_POINT ('', #3940);
#3960 = CARTESIAN_POINT ('', (-8.61825523265811, -2.1, -1.00917010029308));
#3970 = CARTESIAN_POINT ('', (-8.61825523265811, 2.1, -1.00917010029308));
#3980 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#3960, #3970), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#3990 = EDGE_CURVE ('', #2770, #3950, #3980, .T.);
#4000 = ORIENTED_EDGE ('', *, *, #3990, .T.);
#4010 = CARTESIAN_POINT ('', (-8.61825523265811, 2.1, -1.00917010029308));
#4020 = CARTESIAN_POINT ('', (-9.0324689170608, 2.1, -1.72660771111179));
#4030 = CARTESIAN_POINT ('', (-9.83266702310915, 2.1, -1.94102014741236));
#4040 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4010, #4020, #4030), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.923879709868231, 1.))
   REPRESENTATION_ITEM ('')
);
#4050 = EDGE_CURVE ('', #3950, #3210, #4040, .T.);
#4060 = ORIENTED_EDGE ('', *, *, #4050, .T.);
#4070 = ORIENTED_EDGE ('', *, *, #3370, .F.);
#4080 = EDGE_LOOP ('', (#3930, #4000, #4060, #4070));
#4090 = FACE_OUTER_BOUND ('', #4080, .T.);
#4100 = CARTESIAN_POINT ('', (-8.61825523265811, -2.1, -1.00917010029308));
#4110 = CARTESIAN_POINT ('', (-9.0324689170608, -2.1, -1.72660771111179));
#4120 = CARTESIAN_POINT ('', (-9.83266702310915, -2.1, -1.94102014741236));
#4130 = CARTESIAN_POINT ('', (-8.61825523265811, 2.1, -1.00917010029308));
#4140 = CARTESIAN_POINT ('', (-9.0324689170608, 2.1, -1.72660771111179));
#4150 = CARTESIAN_POINT ('', (-9.83266702310915, 2.1, -1.94102014741236));
#4160 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#4100, #4110, #4120), (#4130, #4140, #4150)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 3), (0., 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.923879709868231, 1.), (1., 0.923879709868231, 1.)))
   REPRESENTATION_ITEM ('')
);
#4170 = ADVANCED_FACE ('', (#4090), #4160, .T.);
#4180 = ORIENTED_EDGE ('', *, *, #2810, .F.);
#4190 = CARTESIAN_POINT ('', (-8.03561060359578, 2.1, 0.));
#4200 = VERTEX_POINT ('', #4190);
#4210 = CARTESIAN_POINT ('', (-8.03561060359578, -2.1, 0.));
#4220 = CARTESIAN_POINT ('', (-8.03561060359578, 2.1, 0.));
#4230 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4210, #4220), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4240 = EDGE_CURVE ('', #2700, #4200, #4230, .T.);
#4250 = ORIENTED_EDGE ('', *, *, #4240, .T.);
#4260 = CARTESIAN_POINT ('', (-8.03561060359578, 2.1, 0.));
#4270 = CARTESIAN_POINT ('', (-8.61825523265811, 2.1, -1.00917010029308));
#4280 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4260, #4270), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4290 = EDGE_CURVE ('', #4200, #3950, #4280, .T.);
#4300 = ORIENTED_EDGE ('', *, *, #4290, .T.);
#4310 = ORIENTED_EDGE ('', *, *, #3990, .F.);
#4320 = EDGE_LOOP ('', (#4180, #4250, #4300, #4310));
#4330 = FACE_OUTER_BOUND ('', #4320, .T.);
#4340 = CARTESIAN_POINT ('', (-8.03561060359578, -2.1, 0.));
#4350 = CARTESIAN_POINT ('', (-8.61825523265811, -2.1, -1.00917010029308));
#4360 = CARTESIAN_POINT ('', (-8.03561060359578, 2.1, 0.));
#4370 = CARTESIAN_POINT ('', (-8.61825523265811, 2.1, -1.00917010029308));
#4380 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4340, #4350), (#4360, #4370)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#4390 = ADVANCED_FACE ('', (#4330), #4380, .T.);
#4400 = CARTESIAN_POINT ('', (-0.12213665159507, -2.43797958008322, -1.16205261649433));
#4410 = VERTEX_POINT ('', #4400);
#4420 = CARTESIAN_POINT ('', (8.88178419700125E-14, -2.15024365092053, 0.));
#4430 = VERTEX_POINT ('', #4420);
#4440 = CARTESIAN_POINT ('', (-0.122136651595071, -2.43797958008322, -1.16205261649433));
#4450 = CARTESIAN_POINT ('', (-0.122136603377073, -2.43797953351964, -1.16205215773072));
#4460 = CARTESIAN_POINT ('', (-0.12213655515909, -2.43797948695604, -1.16205169896726));
#4470 = CARTESIAN_POINT ('', (8.77427732655888E-14, -2.32003350735529, 4.15029916896407E-13));
#4480 = CARTESIAN_POINT ('', (8.7768932591951E-14, -2.15024366016138, 4.15269831172468E-13));
#4490 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4440, #4450, #4460, #4470, #4480), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0.499999785559285, 0.5, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.999999931812101, 0.999999965906036, 1., 0.920504919080317, 1.))
   REPRESENTATION_ITEM ('')
);
#4500 = EDGE_CURVE ('', #4410, #4430, #4490, .T.);
#4510 = ORIENTED_EDGE ('', *, *, #4500, .T.);
#4520 = CARTESIAN_POINT ('', (-0.413959530105885, -2.55000000034783, 0.));
#4530 = VERTEX_POINT ('', #4520);
#4540 = CARTESIAN_POINT ('', (-0.413959530105884, -2.55000000034783, 0.));
#4550 = CARTESIAN_POINT ('', (-0.244273107593476, -2.55592546665192, 0.));
#4560 = CARTESIAN_POINT ('', (-0.122136551835449, -2.43797948374641, 0.));
#4570 = CARTESIAN_POINT ('', (3.92257848048705E-9, -2.3200335008409, 0.));
#4580 = CARTESIAN_POINT ('', (8.88178419700125E-14, -2.15024365092053, 0.));
#4590 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4540, #4550, #4560, #4570, #4580), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 0.5, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.920504916823648, 1., 0.920504916823648, 1.))
   REPRESENTATION_ITEM ('')
);
#4600 = EDGE_CURVE ('', #4530, #4430, #4590, .T.);
#4610 = ORIENTED_EDGE ('', *, *, #4600, .F.);
#4620 = CARTESIAN_POINT ('', (-0.413959530105886, -2.55000000034786, 3.2145021325802E-13));
#4630 = CARTESIAN_POINT ('', (-0.24427318937852, -2.55592546379601, -1.08284531705432E-6));
#4640 = CARTESIAN_POINT ('', (-0.12213665159507, -2.43797958008322, -1.16205261649433));
#4650 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4620, #4630, #4640), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (4.28881403093788E-7, 0.499999992609443), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.999999863624153, 0.920504920708988, 0.999999997649946))
   REPRESENTATION_ITEM ('')
);
#4660 = EDGE_CURVE ('', #4530, #4410, #4650, .T.);
#4670 = ORIENTED_EDGE ('', *, *, #4660, .T.);
#4680 = EDGE_LOOP ('', (#4510, #4610, #4670));
#4690 = FACE_OUTER_BOUND ('', #4680, .T.);
#4700 = CARTESIAN_POINT ('', (-0.413959530105884, -2.55000000034783, 0.));
#4710 = CARTESIAN_POINT ('', (-0.244273107593476, -2.55592546665192, 0.));
#4720 = CARTESIAN_POINT ('', (-0.122136551835449, -2.43797948374641, 0.));
#4730 = CARTESIAN_POINT ('', (3.92257848048705E-9, -2.3200335008409, 0.));
#4740 = CARTESIAN_POINT ('', (8.88178419700125E-14, -2.15024365092053, 0.));
#4750 = CARTESIAN_POINT ('', (-0.413959530105884, -2.55000000034783, -1.16205261649433));
#4760 = CARTESIAN_POINT ('', (-0.244273107593476, -2.55592546665192, -1.16205261649433));
#4770 = CARTESIAN_POINT ('', (-0.122136551835449, -2.43797948374641, -1.16205261649433));
#4780 = CARTESIAN_POINT ('', (3.92257848048705E-9, -2.3200335008409, -1.16205261649433));
#4790 = CARTESIAN_POINT ('', (8.88178419700125E-14, -2.15024365092053, -1.16205261649433));
#4800 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#4700, #4710, #4720, #4730, #4740), (#4750, #4760, #4770, #4780, #4790)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 2, 3), (0., 0.151506208147892), (0., 0.5, 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.920504916823648, 1., 0.920504916823648, 1.), (1., 0.920504916823648, 1., 0.920504916823648, 1.)))
   REPRESENTATION_ITEM ('')
);
#4810 = ADVANCED_FACE ('', (#4690), #4800, .T.);
#4820 = CARTESIAN_POINT ('', (-1.31664450224337E-16, 2.15024365092053, 0.));
#4830 = VERTEX_POINT ('', #4820);
#4840 = CARTESIAN_POINT ('', (-0.122136651816372, 2.4379795904368, -1.16205261859987));
#4850 = VERTEX_POINT ('', #4840);
#4860 = CARTESIAN_POINT ('', (1.72084568816899E-14, 2.15024367030135, -2.58459920132736E-13));
#4870 = CARTESIAN_POINT ('', (1.72728338301604E-14, 2.32003359678518, -2.58007231256958E-13));
#4880 = CARTESIAN_POINT ('', (-0.122136651816372, 2.4379795904368, -1.16205261859987));
#4890 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4860, #4870, #4880), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 0.499999984499551), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.920504851183939, 0.999999995071158))
   REPRESENTATION_ITEM ('')
);
#4900 = EDGE_CURVE ('', #4830, #4850, #4890, .T.);
#4910 = ORIENTED_EDGE ('', *, *, #4900, .T.);
#4920 = CARTESIAN_POINT ('', (-0.413959840398893, 2.54999999965217, 0.));
#4930 = VERTEX_POINT ('', #4920);
#4940 = CARTESIAN_POINT ('', (-0.122136651816372, 2.4379795904368, -1.16205261859987));
#4950 = CARTESIAN_POINT ('', (-0.244273303632773, 2.55592558408843, 1.78504018537799E-15));
#4960 = CARTESIAN_POINT ('', (-0.413959798680984, 2.55000000110899, 3.5527136788005E-15));
#4970 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4940, #4950, #4960), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0.500000015500412, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.99999999507117, 0.920504851183924, 1.))
   REPRESENTATION_ITEM ('')
);
#4980 = EDGE_CURVE ('', #4850, #4930, #4970, .T.);
#4990 = ORIENTED_EDGE ('', *, *, #4980, .T.);
#5000 = CARTESIAN_POINT ('', (-1.11022302462516E-16, 2.15024365092053, 0.));
#5010 = CARTESIAN_POINT ('', (8.22667128894426E-9, 2.32003359543873, 0.));
#5020 = CARTESIAN_POINT ('', (-0.122136659859519, 2.43797959820396, 0.));
#5030 = CARTESIAN_POINT ('', (-0.24427332794571, 2.5559256009692, 0.));
#5040 = CARTESIAN_POINT ('', (-0.413959840398893, 2.54999999965217, 0.));
#5050 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5000, #5010, #5020, #5030, #5040), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 0.5, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.920504838525499, 1., 0.920504838525499, 1.))
   REPRESENTATION_ITEM ('')
);
#5060 = EDGE_CURVE ('', #4830, #4930, #5050, .T.);
#5070 = ORIENTED_EDGE ('', *, *, #5060, .F.);
#5080 = EDGE_LOOP ('', (#4910, #4990, #5070));
#5090 = FACE_OUTER_BOUND ('', #5080, .T.);
#5100 = CARTESIAN_POINT ('', (-1.11022302462516E-16, 2.15024365092053, 0.));
#5110 = CARTESIAN_POINT ('', (8.22667128894426E-9, 2.32003359543873, 0.));
#5120 = CARTESIAN_POINT ('', (-0.122136659859519, 2.43797959820396, 0.));
#5130 = CARTESIAN_POINT ('', (-0.24427332794571, 2.5559256009692, 0.));
#5140 = CARTESIAN_POINT ('', (-0.413959840398893, 2.54999999965217, 0.));
#5150 = CARTESIAN_POINT ('', (-1.11022302462516E-16, 2.15024365092053, -1.16205261859987));
#5160 = CARTESIAN_POINT ('', (8.22667128894426E-9, 2.32003359543873, -1.16205261859987));
#5170 = CARTESIAN_POINT ('', (-0.122136659859519, 2.43797959820396, -1.16205261859987));
#5180 = CARTESIAN_POINT ('', (-0.24427332794571, 2.5559256009692, -1.16205261859987));
#5190 = CARTESIAN_POINT ('', (-0.413959840398893, 2.54999999965217, -1.16205261859987));
#5200 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#5100, #5110, #5120, #5130, #5140), (#5150, #5160, #5170, #5180, #5190)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 2, 3), (0., 0.151506208422408), (0., 0.5, 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.920504838525499, 1., 0.920504838525499, 1.), (1., 0.920504838525499, 1., 0.920504838525499, 1.)))
   REPRESENTATION_ITEM ('')
);
#5210 = ADVANCED_FACE ('', (#5090), #5200, .T.);
#5220 = CARTESIAN_POINT ('', (-1.31664450224337E-16, 2.15024365092053, 0.));
#5230 = CARTESIAN_POINT ('', (1.31664450224337E-16, -2.15024365092053, 0.));
#5240 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5220, #5230), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5250 = EDGE_CURVE ('', #4830, #4430, #5240, .T.);
#5260 = ORIENTED_EDGE ('', *, *, #5250, .F.);
#5270 = ORIENTED_EDGE ('', *, *, #5060, .T.);
#5280 = CARTESIAN_POINT ('', (-7., 2.32001040937535, 0.));
#5290 = VERTEX_POINT ('', #5280);
#5300 = CARTESIAN_POINT ('', (-0.413959840398893, 2.54999999965217, 0.));
#5310 = CARTESIAN_POINT ('', (-7., 2.32001040937535, 0.));
#5320 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5300, #5310), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5330 = EDGE_CURVE ('', #4930, #5290, #5320, .T.);
#5340 = ORIENTED_EDGE ('', *, *, #5330, .T.);
#5350 = CARTESIAN_POINT ('', (-7., 2.1, 0.));
#5360 = VERTEX_POINT ('', #5350);
#5370 = CARTESIAN_POINT ('', (-7., 2.1, 0.));
#5380 = CARTESIAN_POINT ('', (-7., 2.32001040937535, 0.));
#5390 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5370, #5380), .UNSPECIFIED., .F., .U., (2, 2), (0.952584176241998, 1.), .UNSPECIFIED.);
#5400 = EDGE_CURVE ('', #5360, #5290, #5390, .T.);
#5410 = ORIENTED_EDGE ('', *, *, #5400, .F.);
#5420 = CARTESIAN_POINT ('', (-7., 2.1, 0.));
#5430 = CARTESIAN_POINT ('', (-8.03561060359578, 2.1, 0.));
#5440 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5420, #5430), .UNSPECIFIED., .F., .U., (2, 2), (0.871122350909791, 1.), .UNSPECIFIED.);
#5450 = EDGE_CURVE ('', #5360, #4200, #5440, .T.);
#5460 = ORIENTED_EDGE ('', *, *, #5450, .T.);
#5470 = ORIENTED_EDGE ('', *, *, #4240, .F.);
#5480 = ORIENTED_EDGE ('', *, *, #2740, .F.);
#5490 = CARTESIAN_POINT ('', (-7., -2.32001040937535, 0.));
#5500 = VERTEX_POINT ('', #5490);
#5510 = CARTESIAN_POINT ('', (-7., -2.32001040937535, 0.));
#5520 = CARTESIAN_POINT ('', (-7., -2.1, 0.));
#5530 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5510, #5520), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.0474158237580032), .UNSPECIFIED.);
#5540 = EDGE_CURVE ('', #5500, #2630, #5530, .T.);
#5550 = ORIENTED_EDGE ('', *, *, #5540, .F.);
#5560 = CARTESIAN_POINT ('', (-0.413959530105885, -2.55000000034783, 0.));
#5570 = CARTESIAN_POINT ('', (-7., -2.32001040937535, 0.));
#5580 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5560, #5570), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5590 = EDGE_CURVE ('', #4530, #5500, #5580, .T.);
#5600 = ORIENTED_EDGE ('', *, *, #5590, .F.);
#5610 = ORIENTED_EDGE ('', *, *, #4600, .T.);
#5620 = EDGE_LOOP ('', (#5260, #5270, #5340, #5410, #5460, #5470, #5480, #5550, #5600, #5610));
#5630 = FACE_OUTER_BOUND ('', #5620, .T.);
#5640 = CARTESIAN_POINT ('', (8.22667134414701E-9, -2.55592546665192, 0.));
#5650 = CARTESIAN_POINT ('', (-8.03561060359578, -2.55592546665192, 0.));
#5660 = CARTESIAN_POINT ('', (8.22667134414701E-9, 2.5559256009692, 0.));
#5670 = CARTESIAN_POINT ('', (-8.03561060359578, 2.5559256009692, 0.));
#5680 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5640, #5650), (#5660, #5670)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.231931450278839, 0.768068549721161), (0.132915782281058, 0.975700305671977), .UNSPECIFIED.);
#5690 = ADVANCED_FACE ('', (#5630), #5680, .T.);
#5700 = CARTESIAN_POINT ('', (-7., 2.1, -2.0919840615618));
#5710 = VERTEX_POINT ('', #5700);
#5720 = CARTESIAN_POINT ('', (-7., 2.1, 3.5527136788005E-15));
#5730 = CARTESIAN_POINT ('', (-7., 2.1, -2.0919840615618));
#5740 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5720, #5730), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.27274889981249), .UNSPECIFIED.);
#5750 = EDGE_CURVE ('', #5360, #5710, #5740, .T.);
#5760 = ORIENTED_EDGE ('', *, *, #5750, .F.);
#5770 = ORIENTED_EDGE ('', *, *, #5400, .T.);
#5780 = CARTESIAN_POINT ('', (-7., 2.1, -2.0919840615618));
#5790 = CARTESIAN_POINT ('', (-7., 2.32001040937535, 7.105427357601E-15));
#5800 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5780, #5790), .UNSPECIFIED., .F., .U., (2, 2), (0.727251100187509, 1.), .UNSPECIFIED.);
#5810 = EDGE_CURVE ('', #5710, #5290, #5800, .T.);
#5820 = ORIENTED_EDGE ('', *, *, #5810, .F.);
#5830 = EDGE_LOOP ('', (#5760, #5770, #5820));
#5840 = FACE_OUTER_BOUND ('', #5830, .T.);
#5850 = CARTESIAN_POINT ('', (-7., -2.32001040937535, 0.));
#5860 = CARTESIAN_POINT ('', (-7., -2.32001040937535, -2.09198406167416));
#5870 = CARTESIAN_POINT ('', (-7., 2.32001040937535, 0.));
#5880 = CARTESIAN_POINT ('', (-7., 2.32001040937535, -2.09198406167416));
#5890 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5850, #5860), (#5870, #5880)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 0.27274889982714), .UNSPECIFIED.);
#5900 = ADVANCED_FACE ('', (#5840), #5890, .T.);
#5910 = ORIENTED_EDGE ('', *, *, #2670, .F.);
#5920 = CARTESIAN_POINT ('', (-7., -2.32001040937535, 3.5527136788005E-15));
#5930 = CARTESIAN_POINT ('', (-7., -2.1, -2.09198406167416));
#5940 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5920, #5930), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.27274889982714), .UNSPECIFIED.);
#5950 = EDGE_CURVE ('', #5500, #2560, #5940, .T.);
#5960 = ORIENTED_EDGE ('', *, *, #5950, .F.);
#5970 = ORIENTED_EDGE ('', *, *, #5540, .T.);
#5980 = EDGE_LOOP ('', (#5910, #5960, #5970));
#5990 = FACE_OUTER_BOUND ('', #5980, .T.);
#6000 = CARTESIAN_POINT ('', (-7., -2.32001040937535, 0.));
#6010 = CARTESIAN_POINT ('', (-7., -2.32001040937535, -2.09198406167416));
#6020 = CARTESIAN_POINT ('', (-7., 2.32001040937535, 0.));
#6030 = CARTESIAN_POINT ('', (-7., 2.32001040937535, -2.09198406167416));
#6040 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#6000, #6010), (#6020, #6030)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 0.27274889982714), .UNSPECIFIED.);
#6050 = ADVANCED_FACE ('', (#5990), #6040, .T.);
#6060 = CARTESIAN_POINT ('', (-2.09787733253462, 2.1, -3.71971688732295));
#6070 = VERTEX_POINT ('', #6060);
#6080 = CARTESIAN_POINT ('', (-0.327457297734685, 2.22536383754133, -3.11554807384309));
#6090 = VERTEX_POINT ('', #6080);
#6100 = CARTESIAN_POINT ('', (-2.09787733253462, 2.1, -3.71971688732295));
#6110 = CARTESIAN_POINT ('', (-0.327457297734683, 2.22536383754133, -3.11554807384309));
#6120 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6100, #6110), .UNSPECIFIED., .F., .U., (2, 2), (0.71237342558956, 0.969212635441775), .UNSPECIFIED.);
#6130 = EDGE_CURVE ('', #6070, #6090, #6120, .T.);
#6140 = ORIENTED_EDGE ('', *, *, #6130, .F.);
#6150 = CARTESIAN_POINT ('', (-7., 2.1, -2.0919840615618));
#6160 = CARTESIAN_POINT ('', (-2.09787733253462, 2.1, -3.71971688732295));
#6170 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6150, #6160), .UNSPECIFIED., .F., .U., (2, 2), (0.0029147827905314, 0.70041116231729), .UNSPECIFIED.);
#6180 = EDGE_CURVE ('', #5710, #6070, #6170, .T.);
#6190 = ORIENTED_EDGE ('', *, *, #6180, .F.);
#6200 = ORIENTED_EDGE ('', *, *, #5810, .T.);
#6210 = ORIENTED_EDGE ('', *, *, #5330, .F.);
#6220 = ORIENTED_EDGE ('', *, *, #4980, .F.);
#6230 = CARTESIAN_POINT ('', (-0.327457297734685, 2.22536383754133, -3.11554807384309));
#6240 = CARTESIAN_POINT ('', (-0.122136651816372, 2.4379795904368, -1.16205261859987));
#6250 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6230, #6240), .UNSPECIFIED., .F., .U., (2, 2), (0.599931081871764, 0.857253512956145), .UNSPECIFIED.);
#6260 = EDGE_CURVE ('', #6090, #4850, #6250, .T.);
#6270 = ORIENTED_EDGE ('', *, *, #6260, .F.);
#6280 = EDGE_LOOP ('', (#6140, #6190, #6200, #6210, #6220, #6270));
#6290 = FACE_OUTER_BOUND ('', #6280, .T.);
#6300 = CARTESIAN_POINT ('', (-7.00767357517251, 2.31974244222557, 9.76996261670138E-15));
#6310 = CARTESIAN_POINT ('', (-6.99402933778094, 1.92902260442823, -3.71971688732295));
#6320 = CARTESIAN_POINT ('', (-0.126399159493693, 2.56004183990495, 9.76996261670138E-15));
#6330 = CARTESIAN_POINT ('', (-0.112754922102119, 2.16932200210762, -3.71971688732295));
#6340 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#6300, #6310), (#6320, #6330)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.449492046747587, 0.74694331434858), (0.223192513635863, 0.384768882199261), .UNSPECIFIED.);
#6350 = ADVANCED_FACE ('', (#6290), #6340, .T.);
#6360 = CARTESIAN_POINT ('', (-0.327457299033551, -2.22536382594071, -3.11554808620098));
#6370 = VERTEX_POINT ('', #6360);
#6380 = CARTESIAN_POINT ('', (-0.327457299033551, -2.22536382594071, -3.11554808620098));
#6390 = CARTESIAN_POINT ('', (-2.09787721325812, -2.1, -3.71971685536293));
#6400 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6380, #6390), .UNSPECIFIED., .F., .U., (2, 2), (0.0307873647441199, 0.287626557118941), .UNSPECIFIED.);
#6410 = EDGE_CURVE ('', #6370, #2490, #6400, .T.);
#6420 = ORIENTED_EDGE ('', *, *, #6410, .F.);
#6430 = CARTESIAN_POINT ('', (-0.12213665159507, -2.43797958008322, -1.16205261649433));
#6440 = CARTESIAN_POINT ('', (-0.327457299033551, -2.22536382594071, -3.11554808620098));
#6450 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6430, #6440), .UNSPECIFIED., .F., .U., (2, 2), (0.142746482955128, 0.400068917088755), .UNSPECIFIED.);
#6460 = EDGE_CURVE ('', #4410, #6370, #6450, .T.);
#6470 = ORIENTED_EDGE ('', *, *, #6460, .F.);
#6480 = ORIENTED_EDGE ('', *, *, #4660, .F.);
#6490 = ORIENTED_EDGE ('', *, *, #5590, .T.);
#6500 = ORIENTED_EDGE ('', *, *, #5950, .T.);
#6510 = ORIENTED_EDGE ('', *, *, #2600, .F.);
#6520 = EDGE_LOOP ('', (#6420, #6470, #6480, #6490, #6500, #6510));
#6530 = FACE_OUTER_BOUND ('', #6520, .T.);
#6540 = CARTESIAN_POINT ('', (-0.126399159076967, -2.56004182933679, 3.22408766351145E-13));
#6550 = CARTESIAN_POINT ('', (-0.112754922403452, -2.16932199487553, -3.71971685536293));
#6560 = CARTESIAN_POINT ('', (-7.00767357483502, -2.31974244224921, 3.22408766351145E-13));
#6570 = CARTESIAN_POINT ('', (-6.9940293381615, -1.92902260778794, -3.71971685536293));
#6580 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#6540, #6550), (#6560, #6570)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.253056741205777, 0.550507855986534), (0.223192583075223, 0.384768867244795), .UNSPECIFIED.);
#6590 = ADVANCED_FACE ('', (#6530), #6580, .T.);
#6600 = CARTESIAN_POINT ('', (-8.36516303737808, -0.150000000000008, -7.41781958247055));
#6610 = VERTEX_POINT ('', #6600);
#6620 = CARTESIAN_POINT ('', (-0.559825700608549, -0.150000000000007, -5.32638574643066));
#6630 = VERTEX_POINT ('', #6620);
#6640 = CARTESIAN_POINT ('', (-8.36516303737807, -0.150000000000008, -7.41781958247055));
#6650 = CARTESIAN_POINT ('', (-0.559825700608551, -0.150000000000008, -5.32638574643066));
#6660 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6640, #6650), .UNSPECIFIED., .F., .U., (2, 2), (-2.77555756156289E-17, 0.367303628401044), .UNSPECIFIED.);
#6670 = EDGE_CURVE ('', #6610, #6630, #6660, .T.);
#6680 = ORIENTED_EDGE ('', *, *, #6670, .F.);
#6690 = CARTESIAN_POINT ('', (-8.36516303737807, -0.149999999999993, -7.41781958247055));
#6700 = CARTESIAN_POINT ('', (-16.1705003741476, -0.150000000000049, -9.50925341851044));
#6710 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6690, #6700), .UNSPECIFIED., .F., .U., (2, 2), (-2.77555756156289E-17, 0.367303628401044), .UNSPECIFIED.);
#6720 = EDGE_CURVE ('', #6610, #600, #6710, .T.);
#6730 = ORIENTED_EDGE ('', *, *, #6720, .T.);
#6740 = ORIENTED_EDGE ('', *, *, #640, .T.);
#6750 = CARTESIAN_POINT ('', (-8.36516303737808, 0.149999999999992, -7.41781958247055));
#6760 = VERTEX_POINT ('', #6750);
#6770 = CARTESIAN_POINT ('', (-8.36516303737807, 0.150000000000007, -7.41781958247055));
#6780 = CARTESIAN_POINT ('', (-16.1705003741476, 0.149999999999951, -9.50925341851044));
#6790 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6770, #6780), .UNSPECIFIED., .F., .U., (2, 2), (-2.77555756156289E-17, 0.367303628401044), .UNSPECIFIED.);
#6800 = EDGE_CURVE ('', #6760, #530, #6790, .T.);
#6810 = ORIENTED_EDGE ('', *, *, #6800, .F.);
#6820 = CARTESIAN_POINT ('', (-0.559825700608549, 0.149999999999992, -5.32638574643066));
#6830 = VERTEX_POINT ('', #6820);
#6840 = CARTESIAN_POINT ('', (-8.36516303737807, 0.149999999999992, -7.41781958247055));
#6850 = CARTESIAN_POINT ('', (-0.559825700608551, 0.149999999999992, -5.32638574643066));
#6860 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6840, #6850), .UNSPECIFIED., .F., .U., (2, 2), (-2.77555756156289E-17, 0.367303628401044), .UNSPECIFIED.);
#6870 = EDGE_CURVE ('', #6760, #6830, #6860, .T.);
#6880 = ORIENTED_EDGE ('', *, *, #6870, .T.);
#6890 = CARTESIAN_POINT ('', (-0.559825700608549, 0.149999999999992, -5.32638574643066));
#6900 = CARTESIAN_POINT ('', (-0.559825700608549, -0.150000000000007, -5.32638574643066));
#6910 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6890, #6900), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6920 = EDGE_CURVE ('', #6830, #6630, #6910, .T.);
#6930 = ORIENTED_EDGE ('', *, *, #6920, .T.);
#6940 = EDGE_LOOP ('', (#6680, #6730, #6740, #6810, #6880, #6930));
#6950 = FACE_OUTER_BOUND ('', #6940, .T.);
#6960 = CARTESIAN_POINT ('', (-16.1705003741476, -0.150000000000049, -9.50925341851044));
#6970 = CARTESIAN_POINT ('', (-0.559825700608548, -0.150000000000049, -5.32638574643066));
#6980 = CARTESIAN_POINT ('', (-16.1705003741476, 0.150000000000007, -9.50925341851044));
#6990 = CARTESIAN_POINT ('', (-0.559825700608548, 0.150000000000007, -5.32638574643066));
#7000 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#6960, #6970), (#6980, #6990)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.464285714285703, 0.535714285714287), (-0.808067982482296, 0.808067982482297), .UNSPECIFIED.);
#7010 = ADVANCED_FACE ('', (#6950), #7000, .T.);
#7020 = ORIENTED_EDGE ('', *, *, #6180, .T.);
#7030 = CARTESIAN_POINT ('', (-15.6418431373979, 2.09999999999995, -7.34881158705083));
#7040 = CARTESIAN_POINT ('', (-2.09787733253462, 2.10000000000005, -3.71971688732297));
#7050 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7030, #7040), .UNSPECIFIED., .F., .U., (2, 2), (0.195854506413998, 1.8041454794224), .UNSPECIFIED.);
#7060 = EDGE_CURVE ('', #40, #6070, #7050, .T.);
#7070 = ORIENTED_EDGE ('', *, *, #7060, .F.);
#7080 = ORIENTED_EDGE ('', *, *, #420, .T.);
#7090 = ORIENTED_EDGE ('', *, *, #1170, .T.);
#7100 = ORIENTED_EDGE ('', *, *, #1750, .T.);
#7110 = ORIENTED_EDGE ('', *, *, #3520, .T.);
#7120 = ORIENTED_EDGE ('', *, *, #3260, .T.);
#7130 = ORIENTED_EDGE ('', *, *, #4050, .F.);
#7140 = ORIENTED_EDGE ('', *, *, #4290, .F.);
#7150 = ORIENTED_EDGE ('', *, *, #5450, .F.);
#7160 = ORIENTED_EDGE ('', *, *, #5750, .T.);
#7170 = EDGE_LOOP ('', (#7020, #7070, #7080, #7090, #7100, #7110, #7120, #7130, #7140, #7150, #7160));
#7180 = FACE_OUTER_BOUND ('', #7170, .T.);
#7190 = CARTESIAN_POINT ('', (-2.09787733253462, 2.1, -7.34881158705083));
#7200 = CARTESIAN_POINT ('', (-2.09787733253462, 2.1, 3.5527136788005E-15));
#7210 = CARTESIAN_POINT ('', (-15.6418431373979, 2.1, -7.34881158705083));
#7220 = CARTESIAN_POINT ('', (-15.6418431373979, 2.1, 3.5527136788005E-15));
#7230 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#7190, #7200), (#7210, #7220)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.352385157775437, 1.27311947118005), (0.252555305505345, 0.752135937089154), .UNSPECIFIED.);
#7240 = ADVANCED_FACE ('', (#7180), #7230, .T.);
#7250 = CARTESIAN_POINT ('', (-0.559825700608549, -0.15000000000001, -5.32638574643066));
#7260 = CARTESIAN_POINT ('', (-0.327457299033551, -2.22536382594071, -3.11554808620098));
#7270 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7250, #7260), .UNSPECIFIED., .F., .U., (2, 2), (0., 0.907072704672142), .UNSPECIFIED.);
#7280 = EDGE_CURVE ('', #6630, #6370, #7270, .T.);
#7290 = ORIENTED_EDGE ('', *, *, #7280, .F.);
#7300 = ORIENTED_EDGE ('', *, *, #6920, .F.);
#7310 = CARTESIAN_POINT ('', (-0.327457297734685, 2.22536383754133, -3.11554807384309));
#7320 = CARTESIAN_POINT ('', (-0.559825700608549, 0.149999999999993, -5.32638574643066));
#7330 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7310, #7320), .UNSPECIFIED., .F., .U., (2, 2), (0.0929272943623073, 1.), .UNSPECIFIED.);
#7340 = EDGE_CURVE ('', #6090, #6830, #7330, .T.);
#7350 = ORIENTED_EDGE ('', *, *, #7340, .F.);
#7360 = ORIENTED_EDGE ('', *, *, #6260, .T.);
#7370 = ORIENTED_EDGE ('', *, *, #4900, .F.);
#7380 = ORIENTED_EDGE ('', *, *, #5250, .T.);
#7390 = ORIENTED_EDGE ('', *, *, #4500, .F.);
#7400 = ORIENTED_EDGE ('', *, *, #6460, .T.);
#7410 = EDGE_LOOP ('', (#7290, #7300, #7350, #7360, #7370, #7380, #7390, #7400));
#7420 = FACE_OUTER_BOUND ('', #7410, .T.);
#7430 = CARTESIAN_POINT ('', (8.85957973650875E-14, 2.4379795904368, 4.20996570937859E-13));
#7440 = CARTESIAN_POINT ('', (-0.559825700608549, 2.4379795904368, -5.32638574643066));
#7450 = CARTESIAN_POINT ('', (8.83737527601625E-14, -2.43797958008322, 4.20996570937859E-13));
#7460 = CARTESIAN_POINT ('', (-0.559825700608549, -2.43797958008322, -5.32638574643066));
#7470 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#7430, #7440), (#7450, #7460)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.358319515889882, 0.527052957520773), (0.280088909354733, 0.465424732462961), .UNSPECIFIED.);
#7480 = ADVANCED_FACE ('', (#7420), #7470, .T.);
#7490 = ORIENTED_EDGE ('', *, *, #6870, .F.);
#7500 = ORIENTED_EDGE ('', *, *, #6800, .T.);
#7510 = ORIENTED_EDGE ('', *, *, #570, .T.);
#7520 = ORIENTED_EDGE ('', *, *, #80, .T.);
#7530 = ORIENTED_EDGE ('', *, *, #7060, .T.);
#7540 = ORIENTED_EDGE ('', *, *, #6130, .T.);
#7550 = ORIENTED_EDGE ('', *, *, #7340, .T.);
#7560 = EDGE_LOOP ('', (#7490, #7500, #7510, #7520, #7530, #7540, #7550));
#7570 = FACE_OUTER_BOUND ('', #7560, .T.);
#7580 = CARTESIAN_POINT ('', (-17.4771561460656, 2.22536383754133, -7.71079603069035));
#7590 = CARTESIAN_POINT ('', (-16.9400124593929, 0.149999999999969, -9.71544356031793));
#7600 = CARTESIAN_POINT ('', (-0.327457297734683, 2.22536383754133, -3.11554807384309));
#7610 = CARTESIAN_POINT ('', (0.209686388938077, 0.149999999999969, -5.12019560347068));
#7620 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#7580, #7590), (#7600, #7610)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.403515334418869, 0.403515334621281), (0.218318705257502, 1.00000000000001), .UNSPECIFIED.);
#7630 = ADVANCED_FACE ('', (#7570), #7620, .T.);
#7640 = ORIENTED_EDGE ('', *, *, #2530, .T.);
#7650 = ORIENTED_EDGE ('', *, *, #2220, .T.);
#7660 = ORIENTED_EDGE ('', *, *, #710, .T.);
#7670 = ORIENTED_EDGE ('', *, *, #6720, .F.);
#7680 = ORIENTED_EDGE ('', *, *, #6670, .T.);
#7690 = ORIENTED_EDGE ('', *, *, #7280, .T.);
#7700 = ORIENTED_EDGE ('', *, *, #6410, .T.);
#7710 = EDGE_LOOP ('', (#7640, #7650, #7660, #7670, #7680, #7690, #7700));
#7720 = FACE_OUTER_BOUND ('', #7710, .T.);
#7730 = CARTESIAN_POINT ('', (-16.9400124636942, -0.15, -9.71544356147045));
#7740 = CARTESIAN_POINT ('', (-17.477156150367, -2.22536383754136, -7.71079603184286));
#7750 = CARTESIAN_POINT ('', (0.20968638463674, -0.15, -5.1201956046232));
#7760 = CARTESIAN_POINT ('', (-0.327457302036021, -2.22536383754136, -3.11554807499561));
#7770 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#7730, #7740), (#7750, #7760)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.40351533462128, 0.403515334418868), (-2.87554473731638E-15, 0.781681294742507), .UNSPECIFIED.);
#7780 = ADVANCED_FACE ('', (#7720), #7770, .T.);
#7790 = CLOSED_SHELL ('', (#510, #1110, #1320, #1940, #2160, #2460, #3170, #3480, #3640, #3750, #3920, #4170, #4390, #4810, #5210, #5690, #5900, #6050, #6350, #6590, #7010, #7240, #7480, #7630, #7780));
#7800 = MANIFOLD_SOLID_BREP ('', #7790);
#7810 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#7820 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#7830 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#7840 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #7810, 'DISTANCE_ACCURACY_VALUE', '');
#7850 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#7840))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#7810, #7820, #7830))
   REPRESENTATION_CONTEXT ('', '3D')
);
#7860 = COLOUR_RGB ('', 1., 0.74901960784314, 0.);
#7870 = FILL_AREA_STYLE_COLOUR ('', #7860);
#7880 = FILL_AREA_STYLE ('', (#7870));
#7890 = SURFACE_STYLE_FILL_AREA (#7880);
#7900 = SURFACE_SIDE_STYLE ('', (#7890));
#7910 = SURFACE_STYLE_USAGE (.POSITIVE., #7900);
#7920 = PRESENTATION_STYLE_ASSIGNMENT ((#7910));
#7930 = STYLED_ITEM ('', (#7920), #7800);
#7940 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#7800), #7850);
#7950 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#7960 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #7950);
#7970 = MECHANICAL_CONTEXT ('', #7950, 'mechanical');
#7980 = PRODUCT ('product-name', '', '', (#7970));
#7990 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#8000 = PERSON ('', '', $, $, $, $);
#8010 = ORGANIZATION ($, '', '');
#8020 = PERSON_AND_ORGANIZATION (#8000, #8010);
#8030 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#8020, #7990, (#7980));
#8040 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#7980));
#8050 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #7980, .NOT_KNOWN.);
#8060 = APPROVAL_STATUS ('approved');
#8070 = APPROVAL (#8060, '');
#8080 = CALENDAR_DATE (2010, 8, 12);
#8090 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#8100 = LOCAL_TIME (13, 46, 26., #8090);
#8110 = DATE_AND_TIME (#8080, #8100);
#8120 = APPROVAL_DATE_TIME (#8110, #8070);
#8130 = APPROVAL_ROLE ('');
#8140 = PERSON ('', '', $, $, $, $);
#8150 = ORGANIZATION ($, '', '');
#8160 = PERSON_AND_ORGANIZATION (#8140, #8150);
#8170 = APPROVAL_PERSON_ORGANIZATION (#8160, #8070, #8130);
#8180 = CC_DESIGN_APPROVAL (#8070, (#8050));
#8190 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#8200 = PERSON ('', '', $, $, $, $);
#8210 = ORGANIZATION ($, '', '');
#8220 = PERSON_AND_ORGANIZATION (#8200, #8210);
#8230 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#8220, #8190, (#8050));
#8240 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#8250 = PERSON ('', '', $, $, $, $);
#8260 = ORGANIZATION ($, '', '');
#8270 = PERSON_AND_ORGANIZATION (#8250, #8260);
#8280 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#8270, #8240, (#8050));
#8290 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#8300 = SECURITY_CLASSIFICATION ('', '', #8290);
#8310 = APPROVAL_STATUS ('approved');
#8320 = APPROVAL (#8310, '');
#8330 = CALENDAR_DATE (2010, 8, 12);
#8340 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#8350 = LOCAL_TIME (13, 46, 26., #8340);
#8360 = DATE_AND_TIME (#8330, #8350);
#8370 = APPROVAL_DATE_TIME (#8360, #8320);
#8380 = APPROVAL_ROLE ('');
#8390 = PERSON ('', '', $, $, $, $);
#8400 = ORGANIZATION ($, '', '');
#8410 = PERSON_AND_ORGANIZATION (#8390, #8400);
#8420 = APPROVAL_PERSON_ORGANIZATION (#8410, #8320, #8380);
#8430 = CC_DESIGN_APPROVAL (#8320, (#8300));
#8440 = DATE_TIME_ROLE ('classification_date');
#8450 = CALENDAR_DATE (2010, 8, 12);
#8460 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#8470 = LOCAL_TIME (13, 46, 26., #8460);
#8480 = DATE_AND_TIME (#8450, #8470);
#8490 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#8480, #8440, (#8300));
#8500 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#8510 = PERSON ('', '', $, $, $, $);
#8520 = ORGANIZATION ($, '', '');
#8530 = PERSON_AND_ORGANIZATION (#8510, #8520);
#8540 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#8530, #8500, (#8300));
#8550 = CC_DESIGN_SECURITY_CLASSIFICATION (#8300, (#8050));
#8560 = DESIGN_CONTEXT ('', #7950, 'design');
#8570 = PRODUCT_DEFINITION ('', '', #8050, #8560);
#8580 = APPROVAL_STATUS ('approved');
#8590 = APPROVAL (#8580, '');
#8600 = CALENDAR_DATE (2010, 8, 12);
#8610 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#8620 = LOCAL_TIME (13, 46, 26., #8610);
#8630 = DATE_AND_TIME (#8600, #8620);
#8640 = APPROVAL_DATE_TIME (#8630, #8590);
#8650 = APPROVAL_ROLE ('');
#8660 = PERSON ('', '', $, $, $, $);
#8670 = ORGANIZATION ($, '', '');
#8680 = PERSON_AND_ORGANIZATION (#8660, #8670);
#8690 = APPROVAL_PERSON_ORGANIZATION (#8680, #8590, #8650);
#8700 = CC_DESIGN_APPROVAL (#8590, (#8570));
#8710 = DATE_TIME_ROLE ('creation_date');
#8720 = CALENDAR_DATE (2010, 8, 12);
#8730 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#8740 = LOCAL_TIME (13, 46, 26., #8730);
#8750 = DATE_AND_TIME (#8720, #8740);
#8760 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#8750, #8710, (#8570));
#8770 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#8780 = PERSON ('', '', $, $, $, $);
#8790 = ORGANIZATION ($, '', '');
#8800 = PERSON_AND_ORGANIZATION (#8780, #8790);
#8810 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#8800, #8770, (#8570));
#8820 = PRODUCT_DEFINITION_SHAPE ('', '', #8570);
#8830 = SHAPE_DEFINITION_REPRESENTATION (#8820, #7940);
ENDSEC;
END-ISO-10303-21;