ISO-10303-21;
HEADER;
FILE_DESCRIPTION ((), '1');
FILE_NAME ('HCMZ-35-76-R-MSA-SR-ACS.stp', '2018-06-14T10:54:51', ('TDM Systems GmbH'), ('TDM Systems GmbH'), 'HarmonyWare STEP v2.0.2.9', 'TDM', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;

DATA;
#10 = CARTESIAN_POINT ('', (0.212132034356493, -47.5, 12.9874747468302));
#20 = VERTEX_POINT ('', #10);
#30 = CARTESIAN_POINT ('', (-0.494974746830335, -47.5, 12.2803679656439));
#40 = VERTEX_POINT ('', #30);
#50 = CARTESIAN_POINT ('', (0.212132034356488, -47.5, 12.9874747468302));
#60 = CARTESIAN_POINT ('', (0.565685424949535, -47.5, 12.6339213562368));
#70 = CARTESIAN_POINT ('', (0.212132034356175, -47.5, 12.2803679656437));
#80 = CARTESIAN_POINT ('', (-0.141421356237185, -47.5, 11.9268145750506));
#90 = CARTESIAN_POINT ('', (-0.494974746830329, -47.5, 12.2803679656439));
#100 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#50, #60, #70, #80, #90), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (135.000000000029, 225.000000000021, 315.000000000014), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186596, 1., 0.707106781186596, 1.))
   REPRESENTATION_ITEM ('')
);
#110 = EDGE_CURVE ('', #20, #40, #100, .T.);
#120 = ORIENTED_EDGE ('', *, *, #110, .F.);
#130 = CARTESIAN_POINT ('', (0.212132034356493, 49., 12.9874747468302));
#140 = VERTEX_POINT ('', #130);
#150 = CARTESIAN_POINT ('', (0.212132034356493, -47.5, 12.9874747468302));
#160 = CARTESIAN_POINT ('', (0.212132034356493, 49., 12.9874747468302));
#170 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#150, #160), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#180 = EDGE_CURVE ('', #20, #140, #170, .T.);
#190 = ORIENTED_EDGE ('', *, *, #180, .T.);
#200 = CARTESIAN_POINT ('', (-0.494974746830335, 49., 12.2803679656439));
#210 = VERTEX_POINT ('', #200);
#220 = CARTESIAN_POINT ('', (0.212132034356488, 49., 12.9874747468302));
#230 = CARTESIAN_POINT ('', (0.565685424949535, 49., 12.6339213562368));
#240 = CARTESIAN_POINT ('', (0.212132034356175, 49., 12.2803679656437));
#250 = CARTESIAN_POINT ('', (-0.141421356237185, 49., 11.9268145750506));
#260 = CARTESIAN_POINT ('', (-0.494974746830329, 49., 12.2803679656439));
#270 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#220, #230, #240, #250, #260), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (135.000000000029, 225.000000000021, 315.000000000014), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186596, 1., 0.707106781186596, 1.))
   REPRESENTATION_ITEM ('')
);
#280 = EDGE_CURVE ('', #140, #210, #270, .T.);
#290 = ORIENTED_EDGE ('', *, *, #280, .T.);
#300 = CARTESIAN_POINT ('', (-0.494974746830335, -47.5, 12.2803679656439));
#310 = CARTESIAN_POINT ('', (-0.494974746830335, 49., 12.2803679656439));
#320 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#300, #310), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#330 = EDGE_CURVE ('', #40, #210, #320, .T.);
#340 = ORIENTED_EDGE ('', *, *, #330, .F.);
#350 = EDGE_LOOP ('', (#120, #190, #290, #340));
#360 = FACE_OUTER_BOUND ('', #350, .T.);
#370 = CARTESIAN_POINT ('', (-0.641421356236972, -57.1512, 12.6339213562371));
#380 = CARTESIAN_POINT ('', (-0.641421356236972, 58.6512, 12.6339213562371));
#390 = CARTESIAN_POINT ('', (-0.641421356236974, -57.1512, 12.1339213562371));
#400 = CARTESIAN_POINT ('', (-0.641421356236974, 58.6512, 12.1339213562371));
#410 = CARTESIAN_POINT ('', (-0.141421356236972, -57.1512, 12.1339213562371));
#420 = CARTESIAN_POINT ('', (-0.141421356236972, 58.6512, 12.1339213562371));
#430 = CARTESIAN_POINT ('', (0.358578643763031, -57.1512, 12.1339213562371));
#440 = CARTESIAN_POINT ('', (0.358578643763031, 58.6512, 12.1339213562371));
#450 = CARTESIAN_POINT ('', (0.358578643763032, -57.1512, 12.6339213562371));
#460 = CARTESIAN_POINT ('', (0.358578643763032, 58.6512, 12.6339213562371));
#470 = CARTESIAN_POINT ('', (0.358578643763034, -57.1512, 13.1339213562371));
#480 = CARTESIAN_POINT ('', (0.358578643763034, 58.6512, 13.1339213562371));
#490 = CARTESIAN_POINT ('', (-0.141421356236968, -57.1512, 13.1339213562371));
#500 = CARTESIAN_POINT ('', (-0.141421356236968, 58.6512, 13.1339213562371));
#510 = CARTESIAN_POINT ('', (-0.64142135623697, -57.1512, 13.1339213562371));
#520 = CARTESIAN_POINT ('', (-0.64142135623697, 58.6512, 13.1339213562371));
#530 = CARTESIAN_POINT ('', (-0.641421356236972, -57.1512, 12.6339213562371));
#540 = CARTESIAN_POINT ('', (-0.641421356236972, 58.6512, 12.6339213562371));
#550 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#370, #380), (#390, #400), (#410, #420), (#430, #440), (#450, #460), (#470, #480), (#490, #500), (#510, #520), (#530, #540)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#560 = ADVANCED_FACE ('', (#360), #550, .T.);
#570 = CARTESIAN_POINT ('', (-0.494974746830583, -47.5, -12.280367965644));
#580 = VERTEX_POINT ('', #570);
#590 = CARTESIAN_POINT ('', (0.212132034355965, -47.5, -12.9874747468306));
#600 = VERTEX_POINT ('', #590);
#610 = CARTESIAN_POINT ('', (-0.49497474683057, -47.5, -12.280367965644));
#620 = CARTESIAN_POINT ('', (-0.141421356237284, -47.5, -11.9268145750507));
#630 = CARTESIAN_POINT ('', (0.212132034355978, -47.5, -12.280367965644));
#640 = CARTESIAN_POINT ('', (0.565685424949239, -47.5, -12.6339213562373));
#650 = CARTESIAN_POINT ('', (0.212132034355952, -47.5, -12.9874747468306));
#660 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#610, #620, #630, #640, #650), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (225.000000000002, 315.000000000002, 405.000000000002), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186547, 1., 0.707106781186547, 1.))
   REPRESENTATION_ITEM ('')
);
#670 = EDGE_CURVE ('', #580, #600, #660, .T.);
#680 = ORIENTED_EDGE ('', *, *, #670, .F.);
#690 = CARTESIAN_POINT ('', (-0.494974746830583, 49., -12.280367965644));
#700 = VERTEX_POINT ('', #690);
#710 = CARTESIAN_POINT ('', (-0.494974746830583, -47.5, -12.280367965644));
#720 = CARTESIAN_POINT ('', (-0.494974746830583, 49., -12.280367965644));
#730 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#710, #720), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#740 = EDGE_CURVE ('', #580, #700, #730, .T.);
#750 = ORIENTED_EDGE ('', *, *, #740, .T.);
#760 = CARTESIAN_POINT ('', (0.212132034355965, 49., -12.9874747468306));
#770 = VERTEX_POINT ('', #760);
#780 = CARTESIAN_POINT ('', (-0.49497474683057, 49., -12.280367965644));
#790 = CARTESIAN_POINT ('', (-0.141421356237284, 49., -11.9268145750508));
#800 = CARTESIAN_POINT ('', (0.212132034355978, 49., -12.2803679656441));
#810 = CARTESIAN_POINT ('', (0.565685424949239, 49., -12.6339213562373));
#820 = CARTESIAN_POINT ('', (0.212132034355952, 49., -12.9874747468306));
#830 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#780, #790, #800, #810, #820), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (225.000000000002, 315.000000000002, 405.000000000002), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186547, 1., 0.707106781186547, 1.))
   REPRESENTATION_ITEM ('')
);
#840 = EDGE_CURVE ('', #700, #770, #830, .T.);
#850 = ORIENTED_EDGE ('', *, *, #840, .T.);
#860 = CARTESIAN_POINT ('', (0.212132034355965, -47.5, -12.9874747468306));
#870 = CARTESIAN_POINT ('', (0.212132034355965, 49., -12.9874747468306));
#880 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#860, #870), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#890 = EDGE_CURVE ('', #600, #770, #880, .T.);
#900 = ORIENTED_EDGE ('', *, *, #890, .F.);
#910 = EDGE_LOOP ('', (#680, #750, #850, #900));
#920 = FACE_OUTER_BOUND ('', #910, .T.);
#930 = CARTESIAN_POINT ('', (-0.641421356237309, -57.1512, -12.6339213562373));
#940 = CARTESIAN_POINT ('', (-0.641421356237309, 58.6512, -12.6339213562373));
#950 = CARTESIAN_POINT ('', (-0.641421356237309, -57.1512, -13.1339213562373));
#960 = CARTESIAN_POINT ('', (-0.641421356237309, 58.6512, -13.1339213562373));
#970 = CARTESIAN_POINT ('', (-0.141421356237309, -57.1512, -13.1339213562373));
#980 = CARTESIAN_POINT ('', (-0.141421356237309, 58.6512, -13.1339213562373));
#990 = CARTESIAN_POINT ('', (0.358578643762691, -57.1512, -13.1339213562373));
#1000 = CARTESIAN_POINT ('', (0.358578643762691, 58.6512, -13.1339213562373));
#1010 = CARTESIAN_POINT ('', (0.358578643762691, -57.1512, -12.6339213562373));
#1020 = CARTESIAN_POINT ('', (0.358578643762691, 58.6512, -12.6339213562373));
#1030 = CARTESIAN_POINT ('', (0.358578643762691, -57.1512, -12.1339213562373));
#1040 = CARTESIAN_POINT ('', (0.358578643762691, 58.6512, -12.1339213562373));
#1050 = CARTESIAN_POINT ('', (-0.141421356237309, -57.1512, -12.1339213562373));
#1060 = CARTESIAN_POINT ('', (-0.141421356237309, 58.6512, -12.1339213562373));
#1070 = CARTESIAN_POINT ('', (-0.641421356237309, -57.1512, -12.1339213562373));
#1080 = CARTESIAN_POINT ('', (-0.641421356237309, 58.6512, -12.1339213562373));
#1090 = CARTESIAN_POINT ('', (-0.641421356237309, -57.1512, -12.6339213562373));
#1100 = CARTESIAN_POINT ('', (-0.641421356237309, 58.6512, -12.6339213562373));
#1110 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#930, #940), (#950, #960), (#970, #980), (#990, #1000), (#1010, #1020), (#1030, #1040), (#1050, #1060), (#1070, #1080), (#1090, #1100)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#1120 = ADVANCED_FACE ('', (#920), #1110, .T.);
#1130 = CARTESIAN_POINT ('', (49.5, 41., 17.4148533814943));
#1140 = VERTEX_POINT ('', #1130);
#1150 = CARTESIAN_POINT ('', (49.5, 46., 17.4148533814943));
#1160 = VERTEX_POINT ('', #1150);
#1170 = CARTESIAN_POINT ('', (49.5, 41., 17.4148533814943));
#1180 = CARTESIAN_POINT ('', (49.5, 46., 17.4148533814943));
#1190 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1170, #1180), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1200 = EDGE_CURVE ('', #1140, #1160, #1190, .T.);
#1210 = ORIENTED_EDGE ('', *, *, #1200, .T.);
#1220 = CARTESIAN_POINT ('', (36.7387302883571, 46., 32.6231424064083));
#1230 = VERTEX_POINT ('', #1220);
#1240 = CARTESIAN_POINT ('', (49.5, 46., 17.4148533814943));
#1250 = CARTESIAN_POINT ('', (36.7387302883571, 46., 32.6231424064083));
#1260 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1240, #1250), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1270 = EDGE_CURVE ('', #1160, #1230, #1260, .T.);
#1280 = ORIENTED_EDGE ('', *, *, #1270, .T.);
#1290 = CARTESIAN_POINT ('', (36.7387302883571, 27.75, 32.6231424064083));
#1300 = VERTEX_POINT ('', #1290);
#1310 = CARTESIAN_POINT ('', (36.7387302883571, 27.75, 32.6231424064083));
#1320 = CARTESIAN_POINT ('', (36.7387302883571, 46., 32.6231424064083));
#1330 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1310, #1320), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1340 = EDGE_CURVE ('', #1300, #1230, #1330, .T.);
#1350 = ORIENTED_EDGE ('', *, *, #1340, .F.);
#1360 = CARTESIAN_POINT ('', (57.4, 27.75, 7.99999999999999));
#1370 = VERTEX_POINT ('', #1360);
#1380 = CARTESIAN_POINT ('', (36.7387302883571, 27.75, 32.6231424064083));
#1390 = CARTESIAN_POINT ('', (57.4, 27.75, 7.99999999999999));
#1400 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1380, #1390), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1410 = EDGE_CURVE ('', #1300, #1370, #1400, .T.);
#1420 = ORIENTED_EDGE ('', *, *, #1410, .T.);
#1430 = CARTESIAN_POINT ('', (57.4, 41., 7.99999999999998));
#1440 = VERTEX_POINT ('', #1430);
#1450 = CARTESIAN_POINT ('', (57.4, 27.75, 7.99999999999999));
#1460 = CARTESIAN_POINT ('', (57.4, 41., 7.99999999999998));
#1470 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1450, #1460), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1480 = EDGE_CURVE ('', #1370, #1440, #1470, .T.);
#1490 = ORIENTED_EDGE ('', *, *, #1480, .T.);
#1500 = CARTESIAN_POINT ('', (57.4, 41., 7.99999999999998));
#1510 = CARTESIAN_POINT ('', (49.5, 41., 17.4148533814943));
#1520 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1500, #1510), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1530 = EDGE_CURVE ('', #1440, #1140, #1520, .T.);
#1540 = ORIENTED_EDGE ('', *, *, #1530, .T.);
#1550 = EDGE_LOOP ('', (#1210, #1280, #1350, #1420, #1490, #1540));
#1560 = FACE_OUTER_BOUND ('', #1550, .T.);
#1570 = CARTESIAN_POINT ('', (57.4009055797877, 46.001, 7.99892077203465));
#1580 = CARTESIAN_POINT ('', (57.4009055797877, 27.749, 7.99892077203465));
#1590 = CARTESIAN_POINT ('', (36.7378247085694, 46.001, 32.6242216343736));
#1600 = CARTESIAN_POINT ('', (36.7378247085694, 27.749, 32.6242216343736));
#1610 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1570, #1580), (#1590, #1600)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00140883205281028, 32.144638415645), (-18.251, 0.000999999999997669), .UNSPECIFIED.);
#1620 = ADVANCED_FACE ('', (#1560), #1610, .T.);
#1630 = ORIENTED_EDGE ('', *, *, #1340, .T.);
#1640 = CARTESIAN_POINT ('', (32.3975258466838, 46., 40.1423290654301));
#1650 = VERTEX_POINT ('', #1640);
#1660 = CARTESIAN_POINT ('', (36.7387302883571, 46., 32.6231424064083));
#1670 = CARTESIAN_POINT ('', (33.9052103270361, 46., 36.));
#1680 = CARTESIAN_POINT ('', (32.3975258466838, 46., 40.1423290654301));
#1690 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1660, #1670, #1680), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (140., 160.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.984807753012208, 1.))
   REPRESENTATION_ITEM ('')
);
#1700 = EDGE_CURVE ('', #1230, #1650, #1690, .T.);
#1710 = ORIENTED_EDGE ('', *, *, #1700, .T.);
#1720 = CARTESIAN_POINT ('', (32.3975258466838, 27.75, 40.1423290654301));
#1730 = VERTEX_POINT ('', #1720);
#1740 = CARTESIAN_POINT ('', (32.3975258466838, 27.75, 40.1423290654301));
#1750 = CARTESIAN_POINT ('', (32.3975258466838, 46., 40.1423290654301));
#1760 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1740, #1750), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1770 = EDGE_CURVE ('', #1730, #1650, #1760, .T.);
#1780 = ORIENTED_EDGE ('', *, *, #1770, .F.);
#1790 = CARTESIAN_POINT ('', (32.3975258466838, 27.75, 40.1423290654301));
#1800 = CARTESIAN_POINT ('', (33.9052103270361, 27.75, 36.));
#1810 = CARTESIAN_POINT ('', (36.7387302883571, 27.75, 32.6231424064083));
#1820 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1790, #1800, #1810), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (20., 40.0000000000001), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.984807753012208, 1.))
   REPRESENTATION_ITEM ('')
);
#1830 = EDGE_CURVE ('', #1730, #1300, #1820, .T.);
#1840 = ORIENTED_EDGE ('', *, *, #1830, .T.);
#1850 = EDGE_LOOP ('', (#1630, #1710, #1780, #1840));
#1860 = FACE_OUTER_BOUND ('', #1850, .T.);
#1870 = CARTESIAN_POINT ('', (30.8898413663315, 25.9238, 48.6928326485718));
#1880 = CARTESIAN_POINT ('', (30.8898413663315, 47.8262, 48.6928326485718));
#1890 = CARTESIAN_POINT ('', (30.8898413663315, 25.9238, 23.6928326485718));
#1900 = CARTESIAN_POINT ('', (30.8898413663315, 47.8262, 23.6928326485718));
#1910 = CARTESIAN_POINT ('', (55.8898413663315, 25.9238, 23.6928326485718));
#1920 = CARTESIAN_POINT ('', (55.8898413663315, 47.8262, 23.6928326485718));
#1930 = CARTESIAN_POINT ('', (80.8898413663315, 25.9238, 23.6928326485718));
#1940 = CARTESIAN_POINT ('', (80.8898413663315, 47.8262, 23.6928326485718));
#1950 = CARTESIAN_POINT ('', (80.8898413663315, 25.9238, 48.6928326485718));
#1960 = CARTESIAN_POINT ('', (80.8898413663315, 47.8262, 48.6928326485718));
#1970 = CARTESIAN_POINT ('', (80.8898413663315, 25.9238, 73.6928326485718));
#1980 = CARTESIAN_POINT ('', (80.8898413663315, 47.8262, 73.6928326485718));
#1990 = CARTESIAN_POINT ('', (55.8898413663315, 25.9238, 73.6928326485718));
#2000 = CARTESIAN_POINT ('', (55.8898413663315, 47.8262, 73.6928326485718));
#2010 = CARTESIAN_POINT ('', (30.8898413663315, 25.9238, 73.6928326485718));
#2020 = CARTESIAN_POINT ('', (30.8898413663315, 47.8262, 73.6928326485718));
#2030 = CARTESIAN_POINT ('', (30.8898413663315, 25.9238, 48.6928326485718));
#2040 = CARTESIAN_POINT ('', (30.8898413663315, 47.8262, 48.6928326485718));
#2050 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#1870, #1880), (#1890, #1900), (#1910, #1920), (#1930, #1940), (#1950, #1960), (#1970, #1980), (#1990, #2000), (#2010, #2020), (#2030, #2040)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#2060 = ADVANCED_FACE ('', (#1860), #2050, .T.);
#2070 = CARTESIAN_POINT ('', (49.5, 41., 8.49999999999999));
#2080 = VERTEX_POINT ('', #2070);
#2090 = CARTESIAN_POINT ('', (49.5, 46., 8.49999999999999));
#2100 = VERTEX_POINT ('', #2090);
#2110 = CARTESIAN_POINT ('', (49.5, 41., 8.49999999999999));
#2120 = CARTESIAN_POINT ('', (49.5, 46., 8.49999999999999));
#2130 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2110, #2120), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2140 = EDGE_CURVE ('', #2080, #2100, #2130, .T.);
#2150 = ORIENTED_EDGE ('', *, *, #2140, .T.);
#2160 = CARTESIAN_POINT ('', (49.5, 46., 8.49999999999999));
#2170 = CARTESIAN_POINT ('', (49.5, 46., 17.4148533814943));
#2180 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2160, #2170), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2190 = EDGE_CURVE ('', #2100, #1160, #2180, .T.);
#2200 = ORIENTED_EDGE ('', *, *, #2190, .T.);
#2210 = ORIENTED_EDGE ('', *, *, #1200, .F.);
#2220 = CARTESIAN_POINT ('', (49.5, 41., 8.49999999999999));
#2230 = CARTESIAN_POINT ('', (49.5, 41., 17.4148533814943));
#2240 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2220, #2230), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2250 = EDGE_CURVE ('', #2080, #1140, #2240, .T.);
#2260 = ORIENTED_EDGE ('', *, *, #2250, .F.);
#2270 = EDGE_LOOP ('', (#2150, #2200, #2210, #2260));
#2280 = FACE_OUTER_BOUND ('', #2270, .T.);
#2290 = CARTESIAN_POINT ('', (49.5, 46.001, 17.4158533814943));
#2300 = CARTESIAN_POINT ('', (49.5, 46.001, 8.49899999999999));
#2310 = CARTESIAN_POINT ('', (49.5, 40.999, 17.4158533814943));
#2320 = CARTESIAN_POINT ('', (49.5, 40.999, 8.49899999999999));
#2330 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2290, #2300), (#2310, #2320)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-16.136640978408, -11.134640978408), (-8.9158533814943, 0.000999999999999446), .UNSPECIFIED.);
#2340 = ADVANCED_FACE ('', (#2280), #2330, .T.);
#2350 = CARTESIAN_POINT ('', (-5.52500000000002, -47.5, -12.4925));
#2360 = VERTEX_POINT ('', #2350);
#2370 = CARTESIAN_POINT ('', (-0.707106781186547, -47.5, -12.4925));
#2380 = VERTEX_POINT ('', #2370);
#2390 = CARTESIAN_POINT ('', (-5.52500000000002, -47.5, -12.4925));
#2400 = CARTESIAN_POINT ('', (-0.707106781186547, -47.5, -12.4925));
#2410 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2390, #2400), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2420 = EDGE_CURVE ('', #2360, #2380, #2410, .T.);
#2430 = ORIENTED_EDGE ('', *, *, #2420, .F.);
#2440 = CARTESIAN_POINT ('', (-5.52500000000002, 12.5, -12.4925));
#2450 = VERTEX_POINT ('', #2440);
#2460 = CARTESIAN_POINT ('', (-5.52500000000002, -47.5, -12.4925));
#2470 = CARTESIAN_POINT ('', (-5.52500000000002, 12.5, -12.4925));
#2480 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2460, #2470), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2490 = EDGE_CURVE ('', #2360, #2450, #2480, .T.);
#2500 = ORIENTED_EDGE ('', *, *, #2490, .T.);
#2510 = CARTESIAN_POINT ('', (-6.125, 12.5, -12.4925));
#2520 = VERTEX_POINT ('', #2510);
#2530 = CARTESIAN_POINT ('', (-6.125, 12.5, -12.4925));
#2540 = CARTESIAN_POINT ('', (-5.52500000000002, 12.5, -12.4925));
#2550 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2530, #2540), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2560 = EDGE_CURVE ('', #2520, #2450, #2550, .T.);
#2570 = ORIENTED_EDGE ('', *, *, #2560, .F.);
#2580 = CARTESIAN_POINT ('', (-6.125, 12.7, -12.4925));
#2590 = VERTEX_POINT ('', #2580);
#2600 = CARTESIAN_POINT ('', (-6.125, 12.7, -12.4925));
#2610 = CARTESIAN_POINT ('', (-6.125, 12.5, -12.4925));
#2620 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2600, #2610), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2630 = EDGE_CURVE ('', #2590, #2520, #2620, .T.);
#2640 = ORIENTED_EDGE ('', *, *, #2630, .F.);
#2650 = CARTESIAN_POINT ('', (-12.1, 12.7, -12.4925));
#2660 = VERTEX_POINT ('', #2650);
#2670 = CARTESIAN_POINT ('', (-12.1, 12.7, -12.4925));
#2680 = CARTESIAN_POINT ('', (-6.125, 12.7, -12.4925));
#2690 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2670, #2680), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2700 = EDGE_CURVE ('', #2660, #2590, #2690, .T.);
#2710 = ORIENTED_EDGE ('', *, *, #2700, .F.);
#2720 = CARTESIAN_POINT ('', (-12.1, 12.5, -12.4925));
#2730 = VERTEX_POINT ('', #2720);
#2740 = CARTESIAN_POINT ('', (-12.1, 12.5, -12.4925));
#2750 = CARTESIAN_POINT ('', (-12.1, 12.7, -12.4925));
#2760 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2740, #2750), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2770 = EDGE_CURVE ('', #2730, #2660, #2760, .T.);
#2780 = ORIENTED_EDGE ('', *, *, #2770, .F.);
#2790 = CARTESIAN_POINT ('', (-16., 12.5, -12.4925));
#2800 = VERTEX_POINT ('', #2790);
#2810 = CARTESIAN_POINT ('', (-16., 12.5, -12.4925));
#2820 = CARTESIAN_POINT ('', (-12.1, 12.5, -12.4925));
#2830 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2810, #2820), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2840 = EDGE_CURVE ('', #2800, #2730, #2830, .T.);
#2850 = ORIENTED_EDGE ('', *, *, #2840, .F.);
#2860 = CARTESIAN_POINT ('', (-16., 49., -12.4925));
#2870 = VERTEX_POINT ('', #2860);
#2880 = CARTESIAN_POINT ('', (-16., 49., -12.4925));
#2890 = CARTESIAN_POINT ('', (-16., 12.5, -12.4925));
#2900 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2880, #2890), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2910 = EDGE_CURVE ('', #2870, #2800, #2900, .T.);
#2920 = ORIENTED_EDGE ('', *, *, #2910, .F.);
#2930 = CARTESIAN_POINT ('', (-0.707106781186535, 49., -12.4925));
#2940 = VERTEX_POINT ('', #2930);
#2950 = CARTESIAN_POINT ('', (-16., 49., -12.4925));
#2960 = CARTESIAN_POINT ('', (-0.707106781186535, 49., -12.4925));
#2970 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2950, #2960), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2980 = EDGE_CURVE ('', #2870, #2940, #2970, .T.);
#2990 = ORIENTED_EDGE ('', *, *, #2980, .T.);
#3000 = CARTESIAN_POINT ('', (-0.707106781186547, -47.5, -12.4925));
#3010 = CARTESIAN_POINT ('', (-0.707106781186535, 49., -12.4925));
#3020 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3000, #3010), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3030 = EDGE_CURVE ('', #2380, #2940, #3020, .T.);
#3040 = ORIENTED_EDGE ('', *, *, #3030, .F.);
#3050 = EDGE_LOOP ('', (#2430, #2500, #2570, #2640, #2710, #2780, #2850, #2920, #2990, #3040));
#3060 = FACE_OUTER_BOUND ('', #3050, .T.);
#3070 = CARTESIAN_POINT ('', (-0.706106781186535, 49.001, -12.4925));
#3080 = CARTESIAN_POINT ('', (-16.001, 49.001, -12.4925));
#3090 = CARTESIAN_POINT ('', (-0.706106781186535, -47.501, -12.4925));
#3100 = CARTESIAN_POINT ('', (-16.001, -47.501, -12.4925));
#3110 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3070, #3080), (#3090, #3100)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-96.501, 0.000999999999997669), (-5.21889321881346, 10.076), .UNSPECIFIED.);
#3120 = ADVANCED_FACE ('', (#3060), #3110, .T.);
#3130 = CARTESIAN_POINT ('', (-6.125, 12.5, 12.4925));
#3140 = VERTEX_POINT ('', #3130);
#3150 = CARTESIAN_POINT ('', (-5.52500000000002, 12.5, 12.4925));
#3160 = VERTEX_POINT ('', #3150);
#3170 = CARTESIAN_POINT ('', (-6.125, 12.5, 12.4925));
#3180 = CARTESIAN_POINT ('', (-5.52500000000002, 12.5, 12.4925));
#3190 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3170, #3180), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3200 = EDGE_CURVE ('', #3140, #3160, #3190, .T.);
#3210 = ORIENTED_EDGE ('', *, *, #3200, .T.);
#3220 = CARTESIAN_POINT ('', (-5.52500000000002, -47.5, 12.4925));
#3230 = VERTEX_POINT ('', #3220);
#3240 = CARTESIAN_POINT ('', (-5.52500000000002, 12.5, 12.4925));
#3250 = CARTESIAN_POINT ('', (-5.52500000000002, -47.5, 12.4925));
#3260 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3240, #3250), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3270 = EDGE_CURVE ('', #3160, #3230, #3260, .T.);
#3280 = ORIENTED_EDGE ('', *, *, #3270, .T.);
#3290 = CARTESIAN_POINT ('', (-0.707106781186246, -47.5, 12.4925));
#3300 = VERTEX_POINT ('', #3290);
#3310 = CARTESIAN_POINT ('', (-5.52500000000002, -47.5, 12.4925));
#3320 = CARTESIAN_POINT ('', (-0.707106781186246, -47.5, 12.4925));
#3330 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3310, #3320), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3340 = EDGE_CURVE ('', #3230, #3300, #3330, .T.);
#3350 = ORIENTED_EDGE ('', *, *, #3340, .T.);
#3360 = CARTESIAN_POINT ('', (-0.707106781186258, 49., 12.4925));
#3370 = VERTEX_POINT ('', #3360);
#3380 = CARTESIAN_POINT ('', (-0.707106781186258, 49., 12.4925));
#3390 = CARTESIAN_POINT ('', (-0.707106781186246, -47.5, 12.4925));
#3400 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3380, #3390), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3410 = EDGE_CURVE ('', #3370, #3300, #3400, .T.);
#3420 = ORIENTED_EDGE ('', *, *, #3410, .F.);
#3430 = CARTESIAN_POINT ('', (-16., 49., 12.4925));
#3440 = VERTEX_POINT ('', #3430);
#3450 = CARTESIAN_POINT ('', (-16., 49., 12.4925));
#3460 = CARTESIAN_POINT ('', (-0.707106781186258, 49., 12.4925));
#3470 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3450, #3460), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3480 = EDGE_CURVE ('', #3440, #3370, #3470, .T.);
#3490 = ORIENTED_EDGE ('', *, *, #3480, .F.);
#3500 = CARTESIAN_POINT ('', (-16., 12.5, 12.4925));
#3510 = VERTEX_POINT ('', #3500);
#3520 = CARTESIAN_POINT ('', (-16., 12.5, 12.4925));
#3530 = CARTESIAN_POINT ('', (-16., 49., 12.4925));
#3540 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3520, #3530), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3550 = EDGE_CURVE ('', #3510, #3440, #3540, .T.);
#3560 = ORIENTED_EDGE ('', *, *, #3550, .F.);
#3570 = CARTESIAN_POINT ('', (-12.1, 12.5, 12.4925));
#3580 = VERTEX_POINT ('', #3570);
#3590 = CARTESIAN_POINT ('', (-16., 12.5, 12.4925));
#3600 = CARTESIAN_POINT ('', (-12.1, 12.5, 12.4925));
#3610 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3590, #3600), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3620 = EDGE_CURVE ('', #3510, #3580, #3610, .T.);
#3630 = ORIENTED_EDGE ('', *, *, #3620, .T.);
#3640 = CARTESIAN_POINT ('', (-12.1, 12.7, 12.4925));
#3650 = VERTEX_POINT ('', #3640);
#3660 = CARTESIAN_POINT ('', (-12.1, 12.5, 12.4925));
#3670 = CARTESIAN_POINT ('', (-12.1, 12.7, 12.4925));
#3680 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3660, #3670), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3690 = EDGE_CURVE ('', #3580, #3650, #3680, .T.);
#3700 = ORIENTED_EDGE ('', *, *, #3690, .T.);
#3710 = CARTESIAN_POINT ('', (-6.125, 12.7, 12.4925));
#3720 = VERTEX_POINT ('', #3710);
#3730 = CARTESIAN_POINT ('', (-12.1, 12.7, 12.4925));
#3740 = CARTESIAN_POINT ('', (-6.125, 12.7, 12.4925));
#3750 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3730, #3740), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3760 = EDGE_CURVE ('', #3650, #3720, #3750, .T.);
#3770 = ORIENTED_EDGE ('', *, *, #3760, .T.);
#3780 = CARTESIAN_POINT ('', (-6.125, 12.7, 12.4925));
#3790 = CARTESIAN_POINT ('', (-6.125, 12.5, 12.4925));
#3800 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3780, #3790), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3810 = EDGE_CURVE ('', #3720, #3140, #3800, .T.);
#3820 = ORIENTED_EDGE ('', *, *, #3810, .T.);
#3830 = EDGE_LOOP ('', (#3210, #3280, #3350, #3420, #3490, #3560, #3630, #3700, #3770, #3820));
#3840 = FACE_OUTER_BOUND ('', #3830, .T.);
#3850 = CARTESIAN_POINT ('', (-0.706106781186246, -47.501, 12.4925));
#3860 = CARTESIAN_POINT ('', (-16.001, -47.501, 12.4925));
#3870 = CARTESIAN_POINT ('', (-0.706106781186246, 49.001, 12.4925));
#3880 = CARTESIAN_POINT ('', (-16.001, 49.001, 12.4925));
#3890 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3850, #3860), (#3870, #3880)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.000999999999997669, 96.501), (-5.21889321881375, 10.076), .UNSPECIFIED.);
#3900 = ADVANCED_FACE ('', (#3840), #3890, .T.);
#3910 = CARTESIAN_POINT ('', (-12.1, 12.5, -12.4925));
#3920 = CARTESIAN_POINT ('', (-12.1, 12.5, 12.4925));
#3930 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3910, #3920), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3940 = EDGE_CURVE ('', #2730, #3580, #3930, .T.);
#3950 = ORIENTED_EDGE ('', *, *, #3940, .T.);
#3960 = ORIENTED_EDGE ('', *, *, #3620, .F.);
#3970 = CARTESIAN_POINT ('', (-16., 12.5, -12.4925));
#3980 = CARTESIAN_POINT ('', (-16., 12.5, 12.4925));
#3990 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3970, #3980), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4000 = EDGE_CURVE ('', #2800, #3510, #3990, .T.);
#4010 = ORIENTED_EDGE ('', *, *, #4000, .F.);
#4020 = ORIENTED_EDGE ('', *, *, #2840, .T.);
#4030 = EDGE_LOOP ('', (#3950, #3960, #4010, #4020));
#4040 = FACE_OUTER_BOUND ('', #4030, .T.);
#4050 = CARTESIAN_POINT ('', (-12.099, 12.5, -12.4935));
#4060 = CARTESIAN_POINT ('', (-16.001, 12.5, -12.4935));
#4070 = CARTESIAN_POINT ('', (-12.099, 12.5, 12.4935));
#4080 = CARTESIAN_POINT ('', (-16.001, 12.5, 12.4935));
#4090 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4050, #4060), (#4070, #4080)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-24.986, 0.000999999999999446), (-3.901, 0.00100000000000122), .UNSPECIFIED.);
#4100 = ADVANCED_FACE ('', (#4040), #4090, .T.);
#4110 = CARTESIAN_POINT ('', (-6.125, 12.5, 12.4925));
#4120 = CARTESIAN_POINT ('', (-6.125, 12.5, -12.4925));
#4130 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4110, #4120), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4140 = EDGE_CURVE ('', #3140, #2520, #4130, .T.);
#4150 = ORIENTED_EDGE ('', *, *, #4140, .T.);
#4160 = ORIENTED_EDGE ('', *, *, #2560, .T.);
#4170 = CARTESIAN_POINT ('', (-5.925, 12.5, -12.0925));
#4180 = VERTEX_POINT ('', #4170);
#4190 = CARTESIAN_POINT ('', (-5.52500000000002, 12.5, -12.4925));
#4200 = CARTESIAN_POINT ('', (-5.925, 12.5, -12.0925));
#4210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4190, #4200), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4220 = EDGE_CURVE ('', #2450, #4180, #4210, .T.);
#4230 = ORIENTED_EDGE ('', *, *, #4220, .T.);
#4240 = CARTESIAN_POINT ('', (-5.925, 12.5, 12.0925));
#4250 = VERTEX_POINT ('', #4240);
#4260 = CARTESIAN_POINT ('', (-5.925, 12.5, -12.0925));
#4270 = CARTESIAN_POINT ('', (-5.925, 12.5, 12.0925));
#4280 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4260, #4270), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4290 = EDGE_CURVE ('', #4180, #4250, #4280, .T.);
#4300 = ORIENTED_EDGE ('', *, *, #4290, .T.);
#4310 = CARTESIAN_POINT ('', (-5.925, 12.5, 12.0925));
#4320 = CARTESIAN_POINT ('', (-5.52500000000002, 12.5, 12.4925));
#4330 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4310, #4320), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4340 = EDGE_CURVE ('', #4250, #3160, #4330, .T.);
#4350 = ORIENTED_EDGE ('', *, *, #4340, .T.);
#4360 = ORIENTED_EDGE ('', *, *, #3200, .F.);
#4370 = EDGE_LOOP ('', (#4150, #4160, #4230, #4300, #4350, #4360));
#4380 = FACE_OUTER_BOUND ('', #4370, .T.);
#4390 = CARTESIAN_POINT ('', (-5.52400000000002, 12.5, -12.4935));
#4400 = CARTESIAN_POINT ('', (-6.126, 12.5, -12.4935));
#4410 = CARTESIAN_POINT ('', (-5.52400000000002, 12.5, 12.4935));
#4420 = CARTESIAN_POINT ('', (-6.126, 12.5, 12.4935));
#4430 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4390, #4400), (#4410, #4420)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-24.986, 0.000999999999999446), (-10.476, -9.874), .UNSPECIFIED.);
#4440 = ADVANCED_FACE ('', (#4380), #4430, .T.);
#4450 = CARTESIAN_POINT ('', (0., -47.5, 46.));
#4460 = VERTEX_POINT ('', #4450);
#4470 = CARTESIAN_POINT ('', (9.16150835750251E-15, -47.5, 13.1996067811868));
#4480 = VERTEX_POINT ('', #4470);
#4490 = CARTESIAN_POINT ('', (0., -47.5, 46.));
#4500 = CARTESIAN_POINT ('', (9.16150835750251E-15, -47.5, 13.1996067811868));
#4510 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4490, #4500), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4520 = EDGE_CURVE ('', #4460, #4480, #4510, .T.);
#4530 = ORIENTED_EDGE ('', *, *, #4520, .F.);
#4540 = CARTESIAN_POINT ('', (0., -43.5, 50.));
#4550 = VERTEX_POINT ('', #4540);
#4560 = CARTESIAN_POINT ('', (0., -47.5, 46.));
#4570 = CARTESIAN_POINT ('', (0., -43.5, 50.));
#4580 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4560, #4570), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4590 = EDGE_CURVE ('', #4460, #4550, #4580, .T.);
#4600 = ORIENTED_EDGE ('', *, *, #4590, .T.);
#4610 = CARTESIAN_POINT ('', (0., 49., 50.));
#4620 = VERTEX_POINT ('', #4610);
#4630 = CARTESIAN_POINT ('', (0., -43.5, 50.));
#4640 = CARTESIAN_POINT ('', (0., 49., 50.));
#4650 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4630, #4640), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4660 = EDGE_CURVE ('', #4550, #4620, #4650, .T.);
#4670 = ORIENTED_EDGE ('', *, *, #4660, .T.);
#4680 = CARTESIAN_POINT ('', (9.16150835750251E-15, 49., 13.1996067811868));
#4690 = VERTEX_POINT ('', #4680);
#4700 = CARTESIAN_POINT ('', (9.16150835750251E-15, 49., 13.1996067811868));
#4710 = CARTESIAN_POINT ('', (1.57772181044202E-30, 49., 50.));
#4720 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4700, #4710), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4730 = EDGE_CURVE ('', #4690, #4620, #4720, .T.);
#4740 = ORIENTED_EDGE ('', *, *, #4730, .F.);
#4750 = CARTESIAN_POINT ('', (9.16150835750251E-15, 49., 13.1996067811868));
#4760 = CARTESIAN_POINT ('', (9.16150835750251E-15, -47.5, 13.1996067811868));
#4770 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4750, #4760), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4780 = EDGE_CURVE ('', #4690, #4480, #4770, .T.);
#4790 = ORIENTED_EDGE ('', *, *, #4780, .T.);
#4800 = EDGE_LOOP ('', (#4530, #4600, #4670, #4740, #4790));
#4810 = FACE_OUTER_BOUND ('', #4800, .T.);
#4820 = CARTESIAN_POINT ('', (0., 11.5, 38.));
#4830 = VERTEX_POINT ('', #4820);
#4840 = CARTESIAN_POINT ('', (0., 22.6961524227066, 35.));
#4850 = VERTEX_POINT ('', #4840);
#4860 = CARTESIAN_POINT ('', (0., 11.5, 38.));
#4870 = CARTESIAN_POINT ('', (0., 11.5, 32.));
#4880 = CARTESIAN_POINT ('', (0., 17.5, 32.));
#4890 = CARTESIAN_POINT ('', (0., 20.9641016151377, 32.));
#4900 = CARTESIAN_POINT ('', (0., 22.6961524227066, 35.));
#4910 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4860, #4870, #4880, #4890, #4900), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 90., 149.30267603381), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.807007203691178, 0.868347502412604))
   REPRESENTATION_ITEM ('')
);
#4920 = EDGE_CURVE ('', #4830, #4850, #4910, .T.);
#4930 = ORIENTED_EDGE ('', *, *, #4920, .T.);
#4940 = CARTESIAN_POINT ('', (0., 22.6961524227066, 35.));
#4950 = CARTESIAN_POINT ('', (0., 23.5, 36.3923048454132));
#4960 = CARTESIAN_POINT ('', (0., 23.5, 38.));
#4970 = CARTESIAN_POINT ('', (0., 23.5, 44.));
#4980 = CARTESIAN_POINT ('', (0., 17.5, 44.));
#4990 = CARTESIAN_POINT ('', (0., 11.5, 44.));
#5000 = CARTESIAN_POINT ('', (0., 11.5, 38.));
#5010 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4940, #4950, #4960, #4970, #4980, #4990, #5000), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 3), (149.30267603381, 180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.868347502412604, 0.900099577495369, 1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#5020 = EDGE_CURVE ('', #4850, #4830, #5010, .T.);
#5030 = ORIENTED_EDGE ('', *, *, #5020, .T.);
#5040 = EDGE_LOOP ('', (#4930, #5030));
#5050 = FACE_BOUND ('', #5040, .T.);
#5060 = CARTESIAN_POINT ('', (0., -23.5, 38.));
#5070 = VERTEX_POINT ('', #5060);
#5080 = CARTESIAN_POINT ('', (0., -12.3038475772934, 35.));
#5090 = VERTEX_POINT ('', #5080);
#5100 = CARTESIAN_POINT ('', (0., -23.5, 38.));
#5110 = CARTESIAN_POINT ('', (0., -23.5, 32.));
#5120 = CARTESIAN_POINT ('', (0., -17.5, 32.));
#5130 = CARTESIAN_POINT ('', (0., -14.0358983848623, 32.));
#5140 = CARTESIAN_POINT ('', (0., -12.3038475772934, 35.));
#5150 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5100, #5110, #5120, #5130, #5140), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 90., 149.30267603381), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.807007203691178, 0.868347502412604))
   REPRESENTATION_ITEM ('')
);
#5160 = EDGE_CURVE ('', #5070, #5090, #5150, .T.);
#5170 = ORIENTED_EDGE ('', *, *, #5160, .T.);
#5180 = CARTESIAN_POINT ('', (0., -12.3038475772934, 35.));
#5190 = CARTESIAN_POINT ('', (0., -11.5, 36.3923048454132));
#5200 = CARTESIAN_POINT ('', (0., -11.5, 38.));
#5210 = CARTESIAN_POINT ('', (0., -11.5, 44.));
#5220 = CARTESIAN_POINT ('', (0., -17.5, 44.));
#5230 = CARTESIAN_POINT ('', (0., -23.5, 44.));
#5240 = CARTESIAN_POINT ('', (0., -23.5, 38.));
#5250 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5180, #5190, #5200, #5210, #5220, #5230, #5240), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 3), (149.30267603381, 180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.868347502412604, 0.900099577495369, 1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#5260 = EDGE_CURVE ('', #5090, #5070, #5250, .T.);
#5270 = ORIENTED_EDGE ('', *, *, #5260, .T.);
#5280 = EDGE_LOOP ('', (#5170, #5270));
#5290 = FACE_BOUND ('', #5280, .T.);
#5300 = CARTESIAN_POINT ('', (0., 49.001, 13.1986067811868));
#5310 = CARTESIAN_POINT ('', (0., 49.001, 50.001));
#5320 = CARTESIAN_POINT ('', (0., -47.501, 13.1986067811868));
#5330 = CARTESIAN_POINT ('', (0., -47.501, 50.001));
#5340 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5300, #5310), (#5320, #5330)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-40.001, 56.501), (13.1986067811868, 50.001), .UNSPECIFIED.);
#5350 = ADVANCED_FACE ('', (#4810, #5050, #5290), #5340, .T.);
#5360 = CARTESIAN_POINT ('', (25., 27.75, 51.));
#5370 = VERTEX_POINT ('', #5360);
#5380 = CARTESIAN_POINT ('', (25., -42.5, 51.));
#5390 = VERTEX_POINT ('', #5380);
#5400 = CARTESIAN_POINT ('', (25., 27.75, 51.));
#5410 = CARTESIAN_POINT ('', (25., -42.5, 51.));
#5420 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5400, #5410), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5430 = EDGE_CURVE ('', #5370, #5390, #5420, .T.);
#5440 = ORIENTED_EDGE ('', *, *, #5430, .T.);
#5450 = CARTESIAN_POINT ('', (25., -47.5, 46.));
#5460 = VERTEX_POINT ('', #5450);
#5470 = CARTESIAN_POINT ('', (25., -42.5, 51.));
#5480 = CARTESIAN_POINT ('', (25., -47.5, 46.));
#5490 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5470, #5480), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5500 = EDGE_CURVE ('', #5390, #5460, #5490, .T.);
#5510 = ORIENTED_EDGE ('', *, *, #5500, .T.);
#5520 = CARTESIAN_POINT ('', (25., -47.5, 23.4177283270602));
#5530 = VERTEX_POINT ('', #5520);
#5540 = CARTESIAN_POINT ('', (25., -47.5, 46.));
#5550 = CARTESIAN_POINT ('', (25., -47.5, 23.4177283270602));
#5560 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5540, #5550), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5570 = EDGE_CURVE ('', #5460, #5530, #5560, .T.);
#5580 = ORIENTED_EDGE ('', *, *, #5570, .T.);
#5590 = CARTESIAN_POINT ('', (25., 27.75, 23.4177283270603));
#5600 = VERTEX_POINT ('', #5590);
#5610 = CARTESIAN_POINT ('', (25., 27.75, 23.4177283270603));
#5620 = CARTESIAN_POINT ('', (25., -47.5, 23.4177283270602));
#5630 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5610, #5620), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5640 = EDGE_CURVE ('', #5600, #5530, #5630, .T.);
#5650 = ORIENTED_EDGE ('', *, *, #5640, .F.);
#5660 = CARTESIAN_POINT ('', (25., 27.75, 51.));
#5670 = CARTESIAN_POINT ('', (25., 27.75, 23.4177283270603));
#5680 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5660, #5670), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5690 = EDGE_CURVE ('', #5370, #5600, #5680, .T.);
#5700 = ORIENTED_EDGE ('', *, *, #5690, .F.);
#5710 = EDGE_LOOP ('', (#5440, #5510, #5580, #5650, #5700));
#5720 = FACE_OUTER_BOUND ('', #5710, .T.);
#5730 = CARTESIAN_POINT ('', (25., -47.501, 23.4167283270602));
#5740 = CARTESIAN_POINT ('', (25., -47.501, 51.001));
#5750 = CARTESIAN_POINT ('', (25., 27.751, 23.4167283270602));
#5760 = CARTESIAN_POINT ('', (25., 27.751, 51.001));
#5770 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5730, #5740), (#5750, #5760)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-40.001, 35.251), (23.4167283270602, 51.001), .UNSPECIFIED.);
#5780 = ADVANCED_FACE ('', (#5720), #5770, .T.);
#5790 = CARTESIAN_POINT ('', (25., -47.5, -23.4177283270603));
#5800 = VERTEX_POINT ('', #5790);
#5810 = CARTESIAN_POINT ('', (25., -47.5, -46.));
#5820 = VERTEX_POINT ('', #5810);
#5830 = CARTESIAN_POINT ('', (25., -47.5, -23.4177283270603));
#5840 = CARTESIAN_POINT ('', (25., -47.5, -46.));
#5850 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5830, #5840), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5860 = EDGE_CURVE ('', #5800, #5820, #5850, .T.);
#5870 = ORIENTED_EDGE ('', *, *, #5860, .T.);
#5880 = CARTESIAN_POINT ('', (25., -42.5, -51.));
#5890 = VERTEX_POINT ('', #5880);
#5900 = CARTESIAN_POINT ('', (25., -47.5, -46.));
#5910 = CARTESIAN_POINT ('', (25., -42.5, -51.));
#5920 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5900, #5910), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5930 = EDGE_CURVE ('', #5820, #5890, #5920, .T.);
#5940 = ORIENTED_EDGE ('', *, *, #5930, .T.);
#5950 = CARTESIAN_POINT ('', (25., 27.75, -51.));
#5960 = VERTEX_POINT ('', #5950);
#5970 = CARTESIAN_POINT ('', (25., -42.5, -51.));
#5980 = CARTESIAN_POINT ('', (25., 27.75, -51.));
#5990 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5970, #5980), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6000 = EDGE_CURVE ('', #5890, #5960, #5990, .T.);
#6010 = ORIENTED_EDGE ('', *, *, #6000, .T.);
#6020 = CARTESIAN_POINT ('', (25., 27.75, -23.4177283270602));
#6030 = VERTEX_POINT ('', #6020);
#6040 = CARTESIAN_POINT ('', (25., 27.75, -23.4177283270602));
#6050 = CARTESIAN_POINT ('', (25., 27.75, -51.));
#6060 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6040, #6050), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6070 = EDGE_CURVE ('', #6030, #5960, #6060, .T.);
#6080 = ORIENTED_EDGE ('', *, *, #6070, .F.);
#6090 = CARTESIAN_POINT ('', (25., -47.5, -23.4177283270603));
#6100 = CARTESIAN_POINT ('', (25., 27.75, -23.4177283270602));
#6110 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6090, #6100), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6120 = EDGE_CURVE ('', #5800, #6030, #6110, .T.);
#6130 = ORIENTED_EDGE ('', *, *, #6120, .F.);
#6140 = EDGE_LOOP ('', (#5870, #5940, #6010, #6080, #6130));
#6150 = FACE_OUTER_BOUND ('', #6140, .T.);
#6160 = CARTESIAN_POINT ('', (25., -47.501, -51.001));
#6170 = CARTESIAN_POINT ('', (25., -47.501, -23.4167283270602));
#6180 = CARTESIAN_POINT ('', (25., 27.751, -51.001));
#6190 = CARTESIAN_POINT ('', (25., 27.751, -23.4167283270602));
#6200 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#6160, #6170), (#6180, #6190)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-40.001, 35.251), (-51.001, -23.4167283270602), .UNSPECIFIED.);
#6210 = ADVANCED_FACE ('', (#6150), #6200, .T.);
#6220 = ORIENTED_EDGE ('', *, *, #5570, .F.);
#6230 = CARTESIAN_POINT ('', (25., -47.5, 46.));
#6240 = CARTESIAN_POINT ('', (0., -47.5, 46.));
#6250 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6230, #6240), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6260 = EDGE_CURVE ('', #5460, #4460, #6250, .T.);
#6270 = ORIENTED_EDGE ('', *, *, #6260, .T.);
#6280 = ORIENTED_EDGE ('', *, *, #4520, .T.);
#6290 = CARTESIAN_POINT ('', (9.16150835750251E-15, -47.5, 13.1996067811868));
#6300 = CARTESIAN_POINT ('', (0.212132034356493, -47.5, 12.9874747468302));
#6310 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6290, #6300), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6320 = EDGE_CURVE ('', #4480, #20, #6310, .T.);
#6330 = ORIENTED_EDGE ('', *, *, #6320, .T.);
#6340 = ORIENTED_EDGE ('', *, *, #110, .T.);
#6350 = CARTESIAN_POINT ('', (-0.494974746830335, -47.5, 12.2803679656439));
#6360 = CARTESIAN_POINT ('', (-0.707106781186246, -47.5, 12.4925));
#6370 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6350, #6360), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6380 = EDGE_CURVE ('', #40, #3300, #6370, .T.);
#6390 = ORIENTED_EDGE ('', *, *, #6380, .T.);
#6400 = ORIENTED_EDGE ('', *, *, #3340, .F.);
#6410 = CARTESIAN_POINT ('', (-5.925, -47.5, 12.0925));
#6420 = VERTEX_POINT ('', #6410);
#6430 = CARTESIAN_POINT ('', (-5.52500000000002, -47.5, 12.4925));
#6440 = CARTESIAN_POINT ('', (-5.925, -47.5, 12.0925));
#6450 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6430, #6440), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6460 = EDGE_CURVE ('', #3230, #6420, #6450, .T.);
#6470 = ORIENTED_EDGE ('', *, *, #6460, .T.);
#6480 = CARTESIAN_POINT ('', (-5.925, -47.5, -12.0925));
#6490 = VERTEX_POINT ('', #6480);
#6500 = CARTESIAN_POINT ('', (-5.925, -47.5, 12.0925));
#6510 = CARTESIAN_POINT ('', (-5.925, -47.5, -12.0925));
#6520 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6500, #6510), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6530 = EDGE_CURVE ('', #6420, #6490, #6520, .T.);
#6540 = ORIENTED_EDGE ('', *, *, #6530, .T.);
#6550 = CARTESIAN_POINT ('', (-5.925, -47.5, -12.0925));
#6560 = CARTESIAN_POINT ('', (-5.52500000000002, -47.5, -12.4925));
#6570 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6550, #6560), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6580 = EDGE_CURVE ('', #6490, #2360, #6570, .T.);
#6590 = ORIENTED_EDGE ('', *, *, #6580, .T.);
#6600 = ORIENTED_EDGE ('', *, *, #2420, .T.);
#6610 = CARTESIAN_POINT ('', (-0.707106781186547, -47.5, -12.4925));
#6620 = CARTESIAN_POINT ('', (-0.494974746830583, -47.5, -12.280367965644));
#6630 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6610, #6620), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6640 = EDGE_CURVE ('', #2380, #580, #6630, .T.);
#6650 = ORIENTED_EDGE ('', *, *, #6640, .T.);
#6660 = ORIENTED_EDGE ('', *, *, #670, .T.);
#6670 = CARTESIAN_POINT ('', (5.42101086242752E-17, -47.5, -13.1996067811866));
#6680 = VERTEX_POINT ('', #6670);
#6690 = CARTESIAN_POINT ('', (0.212132034355965, -47.5, -12.9874747468306));
#6700 = CARTESIAN_POINT ('', (5.55111512312578E-17, -47.5, -13.1996067811866));
#6710 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6690, #6700), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6720 = EDGE_CURVE ('', #600, #6680, #6710, .T.);
#6730 = ORIENTED_EDGE ('', *, *, #6720, .T.);
#6740 = CARTESIAN_POINT ('', (0., -47.5, -46.));
#6750 = VERTEX_POINT ('', #6740);
#6760 = CARTESIAN_POINT ('', (5.42101086242752E-17, -47.5, -13.1996067811866));
#6770 = CARTESIAN_POINT ('', (0., -47.5, -46.));
#6780 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6760, #6770), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6790 = EDGE_CURVE ('', #6680, #6750, #6780, .T.);
#6800 = ORIENTED_EDGE ('', *, *, #6790, .T.);
#6810 = CARTESIAN_POINT ('', (0., -47.5, -46.));
#6820 = CARTESIAN_POINT ('', (25., -47.5, -46.));
#6830 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#6810, #6820), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#6840 = EDGE_CURVE ('', #6750, #5820, #6830, .T.);
#6850 = ORIENTED_EDGE ('', *, *, #6840, .T.);
#6860 = ORIENTED_EDGE ('', *, *, #5860, .F.);
#6870 = CARTESIAN_POINT ('', (25., -47.5, 23.4177283270602));
#6880 = CARTESIAN_POINT ('', (18.6894131185271, -47.5, 2.42453437283117E-16));
#6890 = CARTESIAN_POINT ('', (25., -47.5, -23.4177283270603));
#6900 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#6870, #6880, #6890), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (254.918249357921, 285.081750642079), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.965555555555556, 1.))
   REPRESENTATION_ITEM ('')
);
#6910 = EDGE_CURVE ('', #5530, #5800, #6900, .T.);
#6920 = ORIENTED_EDGE ('', *, *, #6910, .F.);
#6930 = EDGE_LOOP ('', (#6220, #6270, #6280, #6330, #6340, #6390, #6400, #6470, #6540, #6590, #6600, #6650, #6660, #6730, #6800, #6850, #6860, #6920));
#6940 = FACE_OUTER_BOUND ('', #6930, .T.);
#6950 = CARTESIAN_POINT ('', (25.001, -47.5, -46.001));
#6960 = CARTESIAN_POINT ('', (-5.926, -47.5, -46.001));
#6970 = CARTESIAN_POINT ('', (25.001, -47.5, 46.001));
#6980 = CARTESIAN_POINT ('', (-5.926, -47.5, 46.001));
#6990 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#6950, #6960), (#6970, #6980)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-97.001, -4.999), (-0.00100000000001543, 30.926), .UNSPECIFIED.);
#7000 = ADVANCED_FACE ('', (#6940), #6990, .T.);
#7010 = CARTESIAN_POINT ('', (57.4, 41., -51.));
#7020 = VERTEX_POINT ('', #7010);
#7030 = CARTESIAN_POINT ('', (24.5, 41., -51.));
#7040 = VERTEX_POINT ('', #7030);
#7050 = CARTESIAN_POINT ('', (57.4, 41., -51.));
#7060 = CARTESIAN_POINT ('', (24.5, 41., -51.));
#7070 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7050, #7060), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#7080 = EDGE_CURVE ('', #7020, #7040, #7070, .T.);
#7090 = ORIENTED_EDGE ('', *, *, #7080, .F.);
#7100 = CARTESIAN_POINT ('', (57.4, 27.75, -51.));
#7110 = VERTEX_POINT ('', #7100);
#7120 = CARTESIAN_POINT ('', (57.4, 27.75, -51.));
#7130 = CARTESIAN_POINT ('', (57.4, 41., -51.));
#7140 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7120, #7130), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#7150 = EDGE_CURVE ('', #7110, #7020, #7140, .T.);
#7160 = ORIENTED_EDGE ('', *, *, #7150, .F.);
#7170 = CARTESIAN_POINT ('', (57.4, 27.75, -51.));
#7180 = CARTESIAN_POINT ('', (25., 27.75, -51.));
#7190 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7170, #7180), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#7200 = EDGE_CURVE ('', #7110, #5960, #7190, .T.);
#7210 = ORIENTED_EDGE ('', *, *, #7200, .T.);
#7220 = ORIENTED_EDGE ('', *, *, #6000, .F.);
#7230 = CARTESIAN_POINT ('', (3.73205080756895, -42.5, -51.));
#7240 = VERTEX_POINT ('', #7230);
#7250 = CARTESIAN_POINT ('', (25., -42.5, -51.));
#7260 = CARTESIAN_POINT ('', (3.73205080756895, -42.5, -51.));
#7270 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7250, #7260), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#7280 = EDGE_CURVE ('', #5890, #7240, #7270, .T.);
#7290 = ORIENTED_EDGE ('', *, *, #7280, .T.);
#7300 = CARTESIAN_POINT ('', (3.73205080756895, 49., -51.));
#7310 = VERTEX_POINT ('', #7300);
#7320 = CARTESIAN_POINT ('', (3.73205080756895, -42.5, -51.));
#7330 = CARTESIAN_POINT ('', (3.73205080756895, 49., -51.));
#7340 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7320, #7330), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#7350 = EDGE_CURVE ('', #7240, #7310, #7340, .T.);
#7360 = ORIENTED_EDGE ('', *, *, #7350, .T.);
#7370 = CARTESIAN_POINT ('', (24.5, 49., -51.));
#7380 = VERTEX_POINT ('', #7370);
#7390 = CARTESIAN_POINT ('', (24.5, 49., -51.));
#7400 = CARTESIAN_POINT ('', (3.73205080756895, 49., -51.));
#7410 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7390, #7400), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#7420 = EDGE_CURVE ('', #7380, #7310, #7410, .T.);
#7430 = ORIENTED_EDGE ('', *, *, #7420, .F.);
#7440 = CARTESIAN_POINT ('', (24.5, 49., -51.));
#7450 = CARTESIAN_POINT ('', (24.5, 41., -51.));
#7460 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7440, #7450), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#7470 = EDGE_CURVE ('', #7380, #7040, #7460, .T.);
#7480 = ORIENTED_EDGE ('', *, *, #7470, .T.);
#7490 = EDGE_LOOP ('', (#7090, #7160, #7210, #7220, #7290, #7360, #7430, #7480));
#7500 = FACE_OUTER_BOUND ('', #7490, .T.);
#7510 = CARTESIAN_POINT ('', (57.401, 49.001, -51.));
#7520 = CARTESIAN_POINT ('', (3.73105080756896, 49.001, -51.));
#7530 = CARTESIAN_POINT ('', (57.401, -42.501, -51.));
#7540 = CARTESIAN_POINT ('', (3.73105080756896, -42.501, -51.));
#7550 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#7510, #7520), (#7530, #7540)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-91.501, 0.000999999999997669), (-32.401, 21.2689491924311), .UNSPECIFIED.);
#7560 = ADVANCED_FACE ('', (#7500), #7550, .T.);
#7570 = CARTESIAN_POINT ('', (14.75, 49., 42.25));
#7580 = VERTEX_POINT ('', #7570);
#7590 = CARTESIAN_POINT ('', (19.5, 49., 47.));
#7600 = VERTEX_POINT ('', #7590);
#7610 = CARTESIAN_POINT ('', (14.75, 49., 42.25));
#7620 = CARTESIAN_POINT ('', (14.75, 49., 43.1948337450534));
#7630 = CARTESIAN_POINT ('', (15.1115722205714, 49., 44.0677463037342));
#7640 = CARTESIAN_POINT ('', (16.3261514698833, 49., 47.));
#7650 = CARTESIAN_POINT ('', (19.5, 49., 47.));
#7660 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#7610, #7620, #7630, #7640, #7650), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (179.708039243333, 202.5, 270.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.924617943409652, 0.943094252108056, 1., 0.831469612302545, 1.))
   REPRESENTATION_ITEM ('')
);
#7670 = EDGE_CURVE ('', #7580, #7600, #7660, .T.);
#7680 = ORIENTED_EDGE ('', *, *, #7670, .F.);
#7690 = CARTESIAN_POINT ('', (16.1412427893639, 49., 38.8912427893639));
#7700 = VERTEX_POINT ('', #7690);
#7710 = CARTESIAN_POINT ('', (16.1412427893639, 49., 38.8912427893639));
#7720 = CARTESIAN_POINT ('', (14.75, 49., 40.2824855787278));
#7730 = CARTESIAN_POINT ('', (14.75, 49., 42.25));
#7740 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#7710, #7720, #7730), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (135., 179.708039243333), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.888375360194489, 0.924617943409652))
   REPRESENTATION_ITEM ('')
);
#7750 = EDGE_CURVE ('', #7700, #7580, #7740, .T.);
#7760 = ORIENTED_EDGE ('', *, *, #7750, .F.);
#7770 = CARTESIAN_POINT ('', (46.5324855787281, 49., 8.49999999999999));
#7780 = VERTEX_POINT ('', #7770);
#7790 = CARTESIAN_POINT ('', (46.5324855787281, 49., 8.49999999999999));
#7800 = CARTESIAN_POINT ('', (16.1412427893639, 49., 38.8912427893639));
#7810 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7790, #7800), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#7820 = EDGE_CURVE ('', #7780, #7700, #7810, .T.);
#7830 = ORIENTED_EDGE ('', *, *, #7820, .F.);
#7840 = CARTESIAN_POINT ('', (31.8084219849035, 49., 8.5));
#7850 = VERTEX_POINT ('', #7840);
#7860 = CARTESIAN_POINT ('', (46.5324855787281, 49., 8.49999999999999));
#7870 = CARTESIAN_POINT ('', (31.8084219849035, 49., 8.5));
#7880 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#7860, #7870), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#7890 = EDGE_CURVE ('', #7780, #7850, #7880, .T.);
#7900 = ORIENTED_EDGE ('', *, *, #7890, .T.);
#7910 = CARTESIAN_POINT ('', (22.25, 49., 5.5));
#7920 = VERTEX_POINT ('', #7910);
#7930 = CARTESIAN_POINT ('', (31.8084219849035, 49., 8.50000000000001));
#7940 = CARTESIAN_POINT ('', (29.831535908269, 49., 11.339086478074));
#7950 = CARTESIAN_POINT ('', (26.4428478422666, 49., 10.6424633509049));
#7960 = CARTESIAN_POINT ('', (23.0541597762642, 49., 9.94584022373576));
#7970 = CARTESIAN_POINT ('', (22.3575366490951, 49., 6.55715215773338));
#7980 = CARTESIAN_POINT ('', (22.25, 49., 6.03404555211802));
#7990 = CARTESIAN_POINT ('', (22.25, 49., 5.5));
#8000 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#7930, #7940, #7950, #7960, #7970, #7980, #7990), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 3), (124.849904579047, 191.616634859682, 258.383365140318, 270.361227485736), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.835007650839503, 1., 0.835007650839503, 1., 0.970400592660671, 0.951421373703378))
   REPRESENTATION_ITEM ('')
);
#8010 = EDGE_CURVE ('', #7850, #7920, #8000, .T.);
#8020 = ORIENTED_EDGE ('', *, *, #8010, .T.);
#8030 = CARTESIAN_POINT ('', (24.5, 49., 1.19157801509648));
#8040 = VERTEX_POINT ('', #8030);
#8050 = CARTESIAN_POINT ('', (22.25, 49., 5.5));
#8060 = CARTESIAN_POINT ('', (22.25, 49., 2.75827691869776));
#8070 = CARTESIAN_POINT ('', (24.5, 49., 1.19157801509648));
#8080 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#8050, #8060, #8070), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (270.361227485736, 325.150095420954), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.951421373703378, 0.864607058178832, 1.))
   REPRESENTATION_ITEM ('')
);
#8090 = EDGE_CURVE ('', #7920, #8040, #8080, .T.);
#8100 = ORIENTED_EDGE ('', *, *, #8090, .T.);
#8110 = CARTESIAN_POINT ('', (24.5, 49., -7.495));
#8120 = VERTEX_POINT ('', #8110);
#8130 = CARTESIAN_POINT ('', (24.5, 49., 1.19157801509648));
#8140 = CARTESIAN_POINT ('', (24.5, 49., -7.495));
#8150 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8130, #8140), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#8160 = EDGE_CURVE ('', #8040, #8120, #8150, .T.);
#8170 = ORIENTED_EDGE ('', *, *, #8160, .T.);
#8180 = CARTESIAN_POINT ('', (20.5, 49., -11.495));
#8190 = VERTEX_POINT ('', #8180);
#8200 = CARTESIAN_POINT ('', (24.5, 49., -7.49500000000001));
#8210 = CARTESIAN_POINT ('', (20.5, 49., -7.49500000000001));
#8220 = CARTESIAN_POINT ('', (20.5, 49., -11.495));
#8230 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#8200, #8210, #8220), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (180., 270.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#8240 = EDGE_CURVE ('', #8120, #8190, #8230, .T.);
#8250 = ORIENTED_EDGE ('', *, *, #8240, .T.);
#8260 = CARTESIAN_POINT ('', (24.5, 49., -15.495));
#8270 = VERTEX_POINT ('', #8260);
#8280 = CARTESIAN_POINT ('', (20.5, 49., -11.495));
#8290 = CARTESIAN_POINT ('', (20.5, 49., -15.495));
#8300 = CARTESIAN_POINT ('', (24.5, 49., -15.495));
#8310 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#8280, #8290, #8300), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#8320 = EDGE_CURVE ('', #8190, #8270, #8310, .T.);
#8330 = ORIENTED_EDGE ('', *, *, #8320, .T.);
#8340 = CARTESIAN_POINT ('', (24.5, 49., -15.495));
#8350 = CARTESIAN_POINT ('', (24.5, 49., -51.));
#8360 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8340, #8350), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#8370 = EDGE_CURVE ('', #8270, #7380, #8360, .T.);
#8380 = ORIENTED_EDGE ('', *, *, #8370, .T.);
#8390 = ORIENTED_EDGE ('', *, *, #7420, .T.);
#8400 = CARTESIAN_POINT ('', (1.22464679914736E-16, 49., -50.));
#8410 = VERTEX_POINT ('', #8400);
#8420 = CARTESIAN_POINT ('', (1.22464679914736E-16, 49., -50.));
#8430 = CARTESIAN_POINT ('', (3.73205080756895, 49., -51.));
#8440 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8420, #8430), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#8450 = EDGE_CURVE ('', #8410, #7310, #8440, .T.);
#8460 = ORIENTED_EDGE ('', *, *, #8450, .F.);
#8470 = CARTESIAN_POINT ('', (5.42101086242752E-17, 49., -13.1996067811866));
#8480 = VERTEX_POINT ('', #8470);
#8490 = CARTESIAN_POINT ('', (1.22464679914736E-16, 49., -50.));
#8500 = CARTESIAN_POINT ('', (5.42101086242752E-17, 49., -13.1996067811866));
#8510 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8490, #8500), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#8520 = EDGE_CURVE ('', #8410, #8480, #8510, .T.);
#8530 = ORIENTED_EDGE ('', *, *, #8520, .T.);
#8540 = CARTESIAN_POINT ('', (0.212132034355965, 49., -12.9874747468306));
#8550 = CARTESIAN_POINT ('', (5.55111512312578E-17, 49., -13.1996067811866));
#8560 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8540, #8550), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#8570 = EDGE_CURVE ('', #770, #8480, #8560, .T.);
#8580 = ORIENTED_EDGE ('', *, *, #8570, .F.);
#8590 = ORIENTED_EDGE ('', *, *, #840, .F.);
#8600 = CARTESIAN_POINT ('', (-0.707106781186535, 49., -12.4925));
#8610 = CARTESIAN_POINT ('', (-0.494974746830583, 49., -12.280367965644));
#8620 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8600, #8610), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#8630 = EDGE_CURVE ('', #2940, #700, #8620, .T.);
#8640 = ORIENTED_EDGE ('', *, *, #8630, .F.);
#8650 = ORIENTED_EDGE ('', *, *, #2980, .F.);
#8660 = CARTESIAN_POINT ('', (-16., 49., 12.4925));
#8670 = CARTESIAN_POINT ('', (-16., 49., -12.4925));
#8680 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8660, #8670), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#8690 = EDGE_CURVE ('', #3440, #2870, #8680, .T.);
#8700 = ORIENTED_EDGE ('', *, *, #8690, .F.);
#8710 = ORIENTED_EDGE ('', *, *, #3480, .T.);
#8720 = CARTESIAN_POINT ('', (-0.494974746830335, 49., 12.2803679656439));
#8730 = CARTESIAN_POINT ('', (-0.707106781186258, 49., 12.4925));
#8740 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8720, #8730), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#8750 = EDGE_CURVE ('', #210, #3370, #8740, .T.);
#8760 = ORIENTED_EDGE ('', *, *, #8750, .F.);
#8770 = ORIENTED_EDGE ('', *, *, #280, .F.);
#8780 = CARTESIAN_POINT ('', (9.16150835750251E-15, 49., 13.1996067811868));
#8790 = CARTESIAN_POINT ('', (0.212132034356493, 49., 12.9874747468302));
#8800 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8780, #8790), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#8810 = EDGE_CURVE ('', #4690, #140, #8800, .T.);
#8820 = ORIENTED_EDGE ('', *, *, #8810, .F.);
#8830 = ORIENTED_EDGE ('', *, *, #4730, .T.);
#8840 = CARTESIAN_POINT ('', (3.73205080756884, 49., 51.));
#8850 = VERTEX_POINT ('', #8840);
#8860 = CARTESIAN_POINT ('', (3.73205080756884, 49., 51.));
#8870 = CARTESIAN_POINT ('', (0., 49., 50.));
#8880 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8860, #8870), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#8890 = EDGE_CURVE ('', #8850, #4620, #8880, .T.);
#8900 = ORIENTED_EDGE ('', *, *, #8890, .F.);
#8910 = CARTESIAN_POINT ('', (28.4456568130431, 49., 51.));
#8920 = VERTEX_POINT ('', #8910);
#8930 = CARTESIAN_POINT ('', (28.4456568130431, 49., 51.));
#8940 = CARTESIAN_POINT ('', (3.73205080756884, 49., 51.));
#8950 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#8930, #8940), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#8960 = EDGE_CURVE ('', #8920, #8850, #8950, .T.);
#8970 = ORIENTED_EDGE ('', *, *, #8960, .F.);
#8980 = CARTESIAN_POINT ('', (29.9015377501079, 49., 47.));
#8990 = VERTEX_POINT ('', #8980);
#9000 = CARTESIAN_POINT ('', (28.4456568130431, 49., 51.));
#9010 = CARTESIAN_POINT ('', (29.9015377501079, 49., 47.));
#9020 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9000, #9010), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9030 = EDGE_CURVE ('', #8920, #8990, #9020, .T.);
#9040 = ORIENTED_EDGE ('', *, *, #9030, .T.);
#9050 = CARTESIAN_POINT ('', (19.5, 49., 47.));
#9060 = CARTESIAN_POINT ('', (29.9015377501079, 49., 47.));
#9070 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9050, #9060), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9080 = EDGE_CURVE ('', #7600, #8990, #9070, .T.);
#9090 = ORIENTED_EDGE ('', *, *, #9080, .F.);
#9100 = EDGE_LOOP ('', (#7680, #7760, #7830, #7900, #8020, #8100, #8170, #8250, #8330, #8380, #8390, #8460, #8530, #8580, #8590, #8640, #8650, #8700, #8710, #8760, #8770, #8820, #8830, #8900, #8970, #9040, #9090));
#9110 = FACE_OUTER_BOUND ('', #9100, .T.);
#9120 = CARTESIAN_POINT ('', (46.5334855787281, 49., 51.001));
#9130 = CARTESIAN_POINT ('', (-16.001, 49., 51.001));
#9140 = CARTESIAN_POINT ('', (46.5334855787281, 49., -51.001));
#9150 = CARTESIAN_POINT ('', (-16.001, 49., -51.001));
#9160 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#9120, #9130), (#9140, #9150)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00100000000000477, 102.001), (-21.5334855787281, 41.001), .UNSPECIFIED.);
#9170 = ADVANCED_FACE ('', (#9110), #9160, .T.);
#9180 = CARTESIAN_POINT ('', (3.73205080756884, -42.5, 51.));
#9190 = VERTEX_POINT ('', #9180);
#9200 = CARTESIAN_POINT ('', (3.73205080756884, -42.5, 51.));
#9210 = CARTESIAN_POINT ('', (3.73205080756884, 49., 51.));
#9220 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9200, #9210), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9230 = EDGE_CURVE ('', #9190, #8850, #9220, .T.);
#9240 = ORIENTED_EDGE ('', *, *, #9230, .F.);
#9250 = CARTESIAN_POINT ('', (3.73205080756884, -42.5, 51.));
#9260 = CARTESIAN_POINT ('', (25., -42.5, 51.));
#9270 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9250, #9260), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9280 = EDGE_CURVE ('', #9190, #5390, #9270, .T.);
#9290 = ORIENTED_EDGE ('', *, *, #9280, .T.);
#9300 = ORIENTED_EDGE ('', *, *, #5430, .F.);
#9310 = CARTESIAN_POINT ('', (28.4456568130431, 27.75, 51.));
#9320 = VERTEX_POINT ('', #9310);
#9330 = CARTESIAN_POINT ('', (25., 27.75, 51.));
#9340 = CARTESIAN_POINT ('', (28.4456568130431, 27.75, 51.));
#9350 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9330, #9340), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9360 = EDGE_CURVE ('', #5370, #9320, #9350, .T.);
#9370 = ORIENTED_EDGE ('', *, *, #9360, .T.);
#9380 = CARTESIAN_POINT ('', (28.4456568130431, 27.75, 51.));
#9390 = CARTESIAN_POINT ('', (28.4456568130431, 49., 51.));
#9400 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9380, #9390), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9410 = EDGE_CURVE ('', #9320, #8920, #9400, .T.);
#9420 = ORIENTED_EDGE ('', *, *, #9410, .T.);
#9430 = ORIENTED_EDGE ('', *, *, #8960, .T.);
#9440 = EDGE_LOOP ('', (#9240, #9290, #9300, #9370, #9420, #9430));
#9450 = FACE_OUTER_BOUND ('', #9440, .T.);
#9460 = CARTESIAN_POINT ('', (28.4466568130431, -42.501, 51.));
#9470 = CARTESIAN_POINT ('', (3.73105080756884, -42.501, 51.));
#9480 = CARTESIAN_POINT ('', (28.4466568130431, 49.001, 51.));
#9490 = CARTESIAN_POINT ('', (3.73105080756884, 49.001, 51.));
#9500 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#9460, #9470), (#9480, #9490)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00100000000000477, 91.501), (-3.4466568130431, 21.2689491924312), .UNSPECIFIED.);
#9510 = ADVANCED_FACE ('', (#9450), #9500, .T.);
#9520 = CARTESIAN_POINT ('', (1.22464679914736E-16, -43.5, -50.));
#9530 = VERTEX_POINT ('', #9520);
#9540 = CARTESIAN_POINT ('', (1.22464679914736E-16, -43.5, -50.));
#9550 = CARTESIAN_POINT ('', (1.22464679914736E-16, 49., -50.));
#9560 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9540, #9550), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9570 = EDGE_CURVE ('', #9530, #8410, #9560, .T.);
#9580 = ORIENTED_EDGE ('', *, *, #9570, .F.);
#9590 = CARTESIAN_POINT ('', (1.22464679914736E-16, -43.5, -50.));
#9600 = CARTESIAN_POINT ('', (-4.93038065763132E-32, -47.5, -46.));
#9610 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9590, #9600), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9620 = EDGE_CURVE ('', #9530, #6750, #9610, .T.);
#9630 = ORIENTED_EDGE ('', *, *, #9620, .T.);
#9640 = ORIENTED_EDGE ('', *, *, #6790, .F.);
#9650 = CARTESIAN_POINT ('', (5.42101086242752E-17, -47.5, -13.1996067811866));
#9660 = CARTESIAN_POINT ('', (5.42101086242752E-17, 49., -13.1996067811866));
#9670 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#9650, #9660), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#9680 = EDGE_CURVE ('', #6680, #8480, #9670, .T.);
#9690 = ORIENTED_EDGE ('', *, *, #9680, .T.);
#9700 = ORIENTED_EDGE ('', *, *, #8520, .F.);
#9710 = EDGE_LOOP ('', (#9580, #9630, #9640, #9690, #9700));
#9720 = FACE_OUTER_BOUND ('', #9710, .T.);
#9730 = CARTESIAN_POINT ('', (0., -23.5, -38.));
#9740 = VERTEX_POINT ('', #9730);
#9750 = CARTESIAN_POINT ('', (0., -12.3038475772934, -41.));
#9760 = VERTEX_POINT ('', #9750);
#9770 = CARTESIAN_POINT ('', (0., -23.5, -38.));
#9780 = CARTESIAN_POINT ('', (0., -23.5, -44.));
#9790 = CARTESIAN_POINT ('', (0., -17.5, -44.));
#9800 = CARTESIAN_POINT ('', (0., -14.0358983848623, -44.));
#9810 = CARTESIAN_POINT ('', (0., -12.3038475772934, -41.));
#9820 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#9770, #9780, #9790, #9800, #9810), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 90., 149.30267603381), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.807007203691178, 0.868347502412604))
   REPRESENTATION_ITEM ('')
);
#9830 = EDGE_CURVE ('', #9740, #9760, #9820, .T.);
#9840 = ORIENTED_EDGE ('', *, *, #9830, .T.);
#9850 = CARTESIAN_POINT ('', (0., -12.3038475772934, -41.));
#9860 = CARTESIAN_POINT ('', (0., -11.5, -39.6076951545868));
#9870 = CARTESIAN_POINT ('', (0., -11.5, -38.));
#9880 = CARTESIAN_POINT ('', (0., -11.5, -32.));
#9890 = CARTESIAN_POINT ('', (0., -17.5, -32.));
#9900 = CARTESIAN_POINT ('', (0., -23.5, -32.));
#9910 = CARTESIAN_POINT ('', (0., -23.5, -38.));
#9920 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#9850, #9860, #9870, #9880, #9890, #9900, #9910), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 3), (149.30267603381, 180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.868347502412604, 0.900099577495369, 1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#9930 = EDGE_CURVE ('', #9760, #9740, #9920, .T.);
#9940 = ORIENTED_EDGE ('', *, *, #9930, .T.);
#9950 = EDGE_LOOP ('', (#9840, #9940));
#9960 = FACE_BOUND ('', #9950, .T.);
#9970 = CARTESIAN_POINT ('', (0., 11.5, -38.));
#9980 = VERTEX_POINT ('', #9970);
#9990 = CARTESIAN_POINT ('', (0., 22.6961524227066, -41.));
#10000 = VERTEX_POINT ('', #9990);
#10010 = CARTESIAN_POINT ('', (0., 11.5, -38.));
#10020 = CARTESIAN_POINT ('', (0., 11.5, -44.));
#10030 = CARTESIAN_POINT ('', (0., 17.5, -44.));
#10040 = CARTESIAN_POINT ('', (0., 20.9641016151377, -44.));
#10050 = CARTESIAN_POINT ('', (0., 22.6961524227066, -41.));
#10060 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#10010, #10020, #10030, #10040, #10050), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 90., 149.30267603381), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.807007203691178, 0.868347502412604))
   REPRESENTATION_ITEM ('')
);
#10070 = EDGE_CURVE ('', #9980, #10000, #10060, .T.);
#10080 = ORIENTED_EDGE ('', *, *, #10070, .T.);
#10090 = CARTESIAN_POINT ('', (0., 22.6961524227066, -41.));
#10100 = CARTESIAN_POINT ('', (0., 23.5, -39.6076951545868));
#10110 = CARTESIAN_POINT ('', (0., 23.5, -38.));
#10120 = CARTESIAN_POINT ('', (0., 23.5, -32.));
#10130 = CARTESIAN_POINT ('', (0., 17.5, -32.));
#10140 = CARTESIAN_POINT ('', (0., 11.5, -32.));
#10150 = CARTESIAN_POINT ('', (0., 11.5, -38.));
#10160 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#10090, #10100, #10110, #10120, #10130, #10140, #10150), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 3), (149.30267603381, 180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.868347502412604, 0.900099577495369, 1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#10170 = EDGE_CURVE ('', #10000, #9980, #10160, .T.);
#10180 = ORIENTED_EDGE ('', *, *, #10170, .T.);
#10190 = EDGE_LOOP ('', (#10080, #10180));
#10200 = FACE_BOUND ('', #10190, .T.);
#10210 = CARTESIAN_POINT ('', (0., 49.001, -50.001));
#10220 = CARTESIAN_POINT ('', (0., 49.001, -13.1986067811866));
#10230 = CARTESIAN_POINT ('', (0., -47.501, -50.001));
#10240 = CARTESIAN_POINT ('', (0., -47.501, -13.1986067811866));
#10250 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#10210, #10220), (#10230, #10240)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-40.001, 56.501), (-50.001, -13.1986067811866), .UNSPECIFIED.);
#10260 = ADVANCED_FACE ('', (#9720, #9960, #10200), #10250, .T.);
#10270 = ORIENTED_EDGE ('', *, *, #7350, .F.);
#10280 = CARTESIAN_POINT ('', (3.73205080756895, -42.5, -51.));
#10290 = CARTESIAN_POINT ('', (0., -43.5, -50.));
#10300 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10280, #10290), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10310 = EDGE_CURVE ('', #7240, #9530, #10300, .T.);
#10320 = ORIENTED_EDGE ('', *, *, #10310, .T.);
#10330 = ORIENTED_EDGE ('', *, *, #9570, .T.);
#10340 = ORIENTED_EDGE ('', *, *, #8450, .T.);
#10350 = EDGE_LOOP ('', (#10270, #10320, #10330, #10340));
#10360 = FACE_OUTER_BOUND ('', #10350, .T.);
#10370 = CARTESIAN_POINT ('', (-0.00118301270189214, 49.001, -49.9996830127019));
#10380 = CARTESIAN_POINT ('', (-0.00118301270189214, -43.501, -49.9996830127019));
#10390 = CARTESIAN_POINT ('', (3.73323382027084, 49.001, -51.0003169872981));
#10400 = CARTESIAN_POINT ('', (3.73323382027084, -43.501, -51.0003169872981));
#10410 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#10370, #10380), (#10390, #10400)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-3.86492805002774, 0.00122474487139179), (-96.501, -3.999), .UNSPECIFIED.);
#10420 = ADVANCED_FACE ('', (#10360), #10410, .T.);
#10430 = ORIENTED_EDGE ('', *, *, #4660, .F.);
#10440 = CARTESIAN_POINT ('', (0., -43.5, 50.));
#10450 = CARTESIAN_POINT ('', (3.73205080756884, -42.5, 51.));
#10460 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10440, #10450), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10470 = EDGE_CURVE ('', #4550, #9190, #10460, .T.);
#10480 = ORIENTED_EDGE ('', *, *, #10470, .T.);
#10490 = ORIENTED_EDGE ('', *, *, #9230, .T.);
#10500 = ORIENTED_EDGE ('', *, *, #8890, .T.);
#10510 = EDGE_LOOP ('', (#10430, #10480, #10490, #10500));
#10520 = FACE_OUTER_BOUND ('', #10510, .T.);
#10530 = CARTESIAN_POINT ('', (3.73323382027073, 49.001, 51.0003169872981));
#10540 = CARTESIAN_POINT ('', (3.73323382027073, -43.501, 51.0003169872981));
#10550 = CARTESIAN_POINT ('', (-0.00118301270189426, 49.001, 49.9996830127019));
#10560 = CARTESIAN_POINT ('', (-0.00118301270189426, -43.501, 49.9996830127019));
#10570 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#10530, #10540), (#10550, #10560)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-3.86492805002763, 0.00122474487139002), (-96.501, -3.999), .UNSPECIFIED.);
#10580 = ADVANCED_FACE ('', (#10520), #10570, .T.);
#10590 = CARTESIAN_POINT ('', (57.4, 41., -7.59000000000001));
#10600 = VERTEX_POINT ('', #10590);
#10610 = CARTESIAN_POINT ('', (57.4, 41., -7.59000000000001));
#10620 = CARTESIAN_POINT ('', (57.4, 41., 7.99999999999998));
#10630 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10610, #10620), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10640 = EDGE_CURVE ('', #10600, #1440, #10630, .T.);
#10650 = ORIENTED_EDGE ('', *, *, #10640, .T.);
#10660 = ORIENTED_EDGE ('', *, *, #1480, .F.);
#10670 = CARTESIAN_POINT ('', (57.4, 27.75, 7.99999999999999));
#10680 = CARTESIAN_POINT ('', (57.4, 27.75, -51.));
#10690 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10670, #10680), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10700 = EDGE_CURVE ('', #1370, #7110, #10690, .T.);
#10710 = ORIENTED_EDGE ('', *, *, #10700, .T.);
#10720 = ORIENTED_EDGE ('', *, *, #7150, .T.);
#10730 = CARTESIAN_POINT ('', (57.4, 41., -15.4));
#10740 = VERTEX_POINT ('', #10730);
#10750 = CARTESIAN_POINT ('', (57.4, 41., -51.));
#10760 = CARTESIAN_POINT ('', (57.4, 41., -15.4));
#10770 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10750, #10760), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10780 = EDGE_CURVE ('', #7020, #10740, #10770, .T.);
#10790 = ORIENTED_EDGE ('', *, *, #10780, .T.);
#10800 = CARTESIAN_POINT ('', (57.4, 40.6, -15.));
#10810 = VERTEX_POINT ('', #10800);
#10820 = CARTESIAN_POINT ('', (57.4, 41., -15.4));
#10830 = CARTESIAN_POINT ('', (57.4, 40.6, -15.));
#10840 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10820, #10830), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10850 = EDGE_CURVE ('', #10740, #10810, #10840, .T.);
#10860 = ORIENTED_EDGE ('', *, *, #10850, .T.);
#10870 = CARTESIAN_POINT ('', (57.4, 38.3, -15.));
#10880 = VERTEX_POINT ('', #10870);
#10890 = CARTESIAN_POINT ('', (57.4, 40.6, -15.));
#10900 = CARTESIAN_POINT ('', (57.4, 38.3, -15.));
#10910 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#10890, #10900), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#10920 = EDGE_CURVE ('', #10810, #10880, #10910, .T.);
#10930 = ORIENTED_EDGE ('', *, *, #10920, .T.);
#10940 = CARTESIAN_POINT ('', (57.4, 38., -14.7));
#10950 = VERTEX_POINT ('', #10940);
#10960 = CARTESIAN_POINT ('', (57.4, 38.3, -15.));
#10970 = CARTESIAN_POINT ('', (57.4, 38., -15.));
#10980 = CARTESIAN_POINT ('', (57.4, 38., -14.7));
#10990 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#10960, #10970, #10980), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 90.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#11000 = EDGE_CURVE ('', #10880, #10950, #10990, .T.);
#11010 = ORIENTED_EDGE ('', *, *, #11000, .T.);
#11020 = CARTESIAN_POINT ('', (57.4, 38., -8.29));
#11030 = VERTEX_POINT ('', #11020);
#11040 = CARTESIAN_POINT ('', (57.4, 38., -14.7));
#11050 = CARTESIAN_POINT ('', (57.4, 38., -8.29));
#11060 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11040, #11050), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11070 = EDGE_CURVE ('', #10950, #11030, #11060, .T.);
#11080 = ORIENTED_EDGE ('', *, *, #11070, .T.);
#11090 = CARTESIAN_POINT ('', (57.4, 38.3, -7.99000000000001));
#11100 = VERTEX_POINT ('', #11090);
#11110 = CARTESIAN_POINT ('', (57.4, 38., -8.29));
#11120 = CARTESIAN_POINT ('', (57.4, 38., -7.99));
#11130 = CARTESIAN_POINT ('', (57.4, 38.3, -7.99));
#11140 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#11110, #11120, #11130), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (90., 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#11150 = EDGE_CURVE ('', #11030, #11100, #11140, .T.);
#11160 = ORIENTED_EDGE ('', *, *, #11150, .T.);
#11170 = CARTESIAN_POINT ('', (57.4, 40.6, -7.99000000000001));
#11180 = VERTEX_POINT ('', #11170);
#11190 = CARTESIAN_POINT ('', (57.4, 38.3, -7.99000000000001));
#11200 = CARTESIAN_POINT ('', (57.4, 40.6, -7.99000000000001));
#11210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11190, #11200), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11220 = EDGE_CURVE ('', #11100, #11180, #11210, .T.);
#11230 = ORIENTED_EDGE ('', *, *, #11220, .T.);
#11240 = CARTESIAN_POINT ('', (57.4, 40.6, -7.99000000000001));
#11250 = CARTESIAN_POINT ('', (57.4, 41., -7.59000000000001));
#11260 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11240, #11250), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11270 = EDGE_CURVE ('', #11180, #10600, #11260, .T.);
#11280 = ORIENTED_EDGE ('', *, *, #11270, .T.);
#11290 = EDGE_LOOP ('', (#10650, #10660, #10710, #10720, #10790, #10860, #10930, #11010, #11080, #11160, #11230, #11280));
#11300 = FACE_OUTER_BOUND ('', #11290, .T.);
#11310 = CARTESIAN_POINT ('', (57.4, 41.001, -51.001));
#11320 = CARTESIAN_POINT ('', (57.4, 27.749, -51.001));
#11330 = CARTESIAN_POINT ('', (57.4, 41.001, 8.00099999999999));
#11340 = CARTESIAN_POINT ('', (57.4, 27.749, 8.00099999999999));
#11350 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#11310, #11320), (#11330, #11340)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.000999999999997669, 59.001), (-13.251, 0.000999999999997669), .UNSPECIFIED.);
#11360 = ADVANCED_FACE ('', (#11300), #11350, .T.);
#11370 = CARTESIAN_POINT ('', (29.9015377501079, 46., 47.));
#11380 = VERTEX_POINT ('', #11370);
#11390 = CARTESIAN_POINT ('', (29.9015377501079, 49., 47.));
#11400 = CARTESIAN_POINT ('', (29.9015377501079, 46., 47.));
#11410 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11390, #11400), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11420 = EDGE_CURVE ('', #8990, #11380, #11410, .T.);
#11430 = ORIENTED_EDGE ('', *, *, #11420, .F.);
#11440 = ORIENTED_EDGE ('', *, *, #9030, .F.);
#11450 = ORIENTED_EDGE ('', *, *, #9410, .F.);
#11460 = CARTESIAN_POINT ('', (28.4456568130431, 27.75, 51.));
#11470 = CARTESIAN_POINT ('', (32.3975258466838, 27.75, 40.1423290654301));
#11480 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11460, #11470), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11490 = EDGE_CURVE ('', #9320, #1730, #11480, .T.);
#11500 = ORIENTED_EDGE ('', *, *, #11490, .T.);
#11510 = ORIENTED_EDGE ('', *, *, #1770, .T.);
#11520 = CARTESIAN_POINT ('', (32.3975258466838, 46., 40.1423290654301));
#11530 = CARTESIAN_POINT ('', (29.9015377501079, 46., 47.));
#11540 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#11520, #11530), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#11550 = EDGE_CURVE ('', #1650, #11380, #11540, .T.);
#11560 = ORIENTED_EDGE ('', *, *, #11550, .T.);
#11570 = EDGE_LOOP ('', (#11430, #11440, #11450, #11500, #11510, #11560));
#11580 = FACE_OUTER_BOUND ('', #11570, .T.);
#11590 = CARTESIAN_POINT ('', (32.3979642182671, 49.001, 40.1411246494037));
#11600 = CARTESIAN_POINT ('', (32.3979642182671, 27.749, 40.1411246494037));
#11610 = CARTESIAN_POINT ('', (28.4452184414598, 49.001, 51.0012044160264));
#11620 = CARTESIAN_POINT ('', (28.4452184414598, 27.749, 51.0012044160264));
#11630 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#11590, #11600), (#11610, #11620)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00128171276410782, 11.5557737821911), (-21.251, 0.000999999999997669), .UNSPECIFIED.);
#11640 = ADVANCED_FACE ('', (#11580), #11630, .T.);
#11650 = ORIENTED_EDGE ('', *, *, #9360, .F.);
#11660 = ORIENTED_EDGE ('', *, *, #5690, .T.);
#11670 = CARTESIAN_POINT ('', (25., 27.75, -23.4177283270602));
#11680 = CARTESIAN_POINT ('', (18.6894131185271, 27.75, -4.69896311109138E-15));
#11690 = CARTESIAN_POINT ('', (25., 27.75, 23.4177283270603));
#11700 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#11670, #11680, #11690), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (344.918249357921, 375.081750642079), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.965555555555556, 1.))
   REPRESENTATION_ITEM ('')
);
#11710 = EDGE_CURVE ('', #6030, #5600, #11700, .T.);
#11720 = ORIENTED_EDGE ('', *, *, #11710, .F.);
#11730 = ORIENTED_EDGE ('', *, *, #6070, .T.);
#11740 = ORIENTED_EDGE ('', *, *, #7200, .F.);
#11750 = ORIENTED_EDGE ('', *, *, #10700, .F.);
#11760 = ORIENTED_EDGE ('', *, *, #1410, .F.);
#11770 = ORIENTED_EDGE ('', *, *, #1830, .F.);
#11780 = ORIENTED_EDGE ('', *, *, #11490, .F.);
#11790 = EDGE_LOOP ('', (#11650, #11660, #11720, #11730, #11740, #11750, #11760, #11770, #11780));
#11800 = FACE_OUTER_BOUND ('', #11790, .T.);
#11810 = CARTESIAN_POINT ('', (18.688413118527, 27.75, -51.001));
#11820 = CARTESIAN_POINT ('', (18.688413118527, 27.75, 51.001));
#11830 = CARTESIAN_POINT ('', (57.401, 27.75, -51.001));
#11840 = CARTESIAN_POINT ('', (57.401, 27.75, 51.001));
#11850 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#11810, #11820), (#11830, #11840)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-37.2014282478045, 1.51115863366849), (-99.6938326485718, 2.3081673514282), .UNSPECIFIED.);
#11860 = ADVANCED_FACE ('', (#11800), #11850, .T.);
#11870 = ORIENTED_EDGE ('', *, *, #6120, .T.);
#11880 = ORIENTED_EDGE ('', *, *, #11710, .T.);
#11890 = ORIENTED_EDGE ('', *, *, #5640, .T.);
#11900 = ORIENTED_EDGE ('', *, *, #6910, .T.);
#11910 = EDGE_LOOP ('', (#11870, #11880, #11890, #11900));
#11920 = FACE_OUTER_BOUND ('', #11910, .T.);
#11930 = CARTESIAN_POINT ('', (111.9, 35.2762, 90.));
#11940 = CARTESIAN_POINT ('', (111.9, -55.0262, 90.));
#11950 = CARTESIAN_POINT ('', (201.9, 35.2762, 90.0000000000001));
#11960 = CARTESIAN_POINT ('', (201.9, -55.0262, 90.0000000000001));
#11970 = CARTESIAN_POINT ('', (201.9, 35.2762, 7.36786043081477E-14));
#11980 = CARTESIAN_POINT ('', (201.9, -55.0262, 7.36786043081477E-14));
#11990 = CARTESIAN_POINT ('', (201.9, 35.2762, -89.9999999999999));
#12000 = CARTESIAN_POINT ('', (201.9, -55.0262, -89.9999999999999));
#12010 = CARTESIAN_POINT ('', (111.9, 35.2762, -90.));
#12020 = CARTESIAN_POINT ('', (111.9, -55.0262, -90.));
#12030 = CARTESIAN_POINT ('', (21.9000000000001, 35.2762, -90.0000000000001));
#12040 = CARTESIAN_POINT ('', (21.9000000000001, -55.0262, -90.0000000000001));
#12050 = CARTESIAN_POINT ('', (21.9000000000001, 35.2762, -6.20518757981207E-14));
#12060 = CARTESIAN_POINT ('', (21.9000000000001, -55.0262, -6.20518757981207E-14));
#12070 = CARTESIAN_POINT ('', (21.9, 35.2762, 89.9999999999999));
#12080 = CARTESIAN_POINT ('', (21.9, -55.0262, 89.9999999999999));
#12090 = CARTESIAN_POINT ('', (111.9, 35.2762, 90.));
#12100 = CARTESIAN_POINT ('', (111.9, -55.0262, 90.));
#12110 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#11930, #11940), (#11950, #11960), (#11970, #11980), (#11990, #12000), (#12010, #12020), (#12030, #12040), (#12050, #12060), (#12070, #12080), (#12090, #12100)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#12120 = ADVANCED_FACE ('', (#11920), #12110, .T.);
#12130 = ORIENTED_EDGE ('', *, *, #6530, .F.);
#12140 = CARTESIAN_POINT ('', (-5.925, -47.5, 12.0925));
#12150 = CARTESIAN_POINT ('', (-5.925, 12.5, 12.0925));
#12160 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12140, #12150), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12170 = EDGE_CURVE ('', #6420, #4250, #12160, .T.);
#12180 = ORIENTED_EDGE ('', *, *, #12170, .T.);
#12190 = ORIENTED_EDGE ('', *, *, #4290, .F.);
#12200 = CARTESIAN_POINT ('', (-5.925, 12.5, -12.0925));
#12210 = CARTESIAN_POINT ('', (-5.925, -47.5, -12.0925));
#12220 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12200, #12210), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12230 = EDGE_CURVE ('', #4180, #6490, #12220, .T.);
#12240 = ORIENTED_EDGE ('', *, *, #12230, .T.);
#12250 = EDGE_LOOP ('', (#12130, #12180, #12190, #12240));
#12260 = FACE_OUTER_BOUND ('', #12250, .T.);
#12270 = CARTESIAN_POINT ('', (-5.925, 12.501, -12.0935));
#12280 = CARTESIAN_POINT ('', (-5.925, 12.501, 12.0935));
#12290 = CARTESIAN_POINT ('', (-5.925, -47.501, -12.0935));
#12300 = CARTESIAN_POINT ('', (-5.925, -47.501, 12.0935));
#12310 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#12270, #12280), (#12290, #12300)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-20.001, 40.001), (-12.0935, 12.0935), .UNSPECIFIED.);
#12320 = ADVANCED_FACE ('', (#12260), #12310, .T.);
#12330 = ORIENTED_EDGE ('', *, *, #6720, .F.);
#12340 = ORIENTED_EDGE ('', *, *, #890, .T.);
#12350 = ORIENTED_EDGE ('', *, *, #8570, .T.);
#12360 = ORIENTED_EDGE ('', *, *, #9680, .F.);
#12370 = EDGE_LOOP ('', (#12330, #12340, #12350, #12360));
#12380 = FACE_OUTER_BOUND ('', #12370, .T.);
#12390 = CARTESIAN_POINT ('', (0.213132034355943, 49.001, -12.9864747468306));
#12400 = CARTESIAN_POINT ('', (0.213132034355943, -47.501, -12.9864747468306));
#12410 = CARTESIAN_POINT ('', (-0.00100000000003952, 49.001, -13.2006067811866));
#12420 = CARTESIAN_POINT ('', (-0.00100000000003952, -47.501, -13.2006067811866));
#12430 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#12390, #12400), (#12410, #12420)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.698585786437571, 1.00141421356234), (-96.501, 0.000999999999997669), .UNSPECIFIED.);
#12440 = ADVANCED_FACE ('', (#12380), #12430, .T.);
#12450 = ORIENTED_EDGE ('', *, *, #3030, .T.);
#12460 = ORIENTED_EDGE ('', *, *, #8630, .T.);
#12470 = ORIENTED_EDGE ('', *, *, #740, .F.);
#12480 = ORIENTED_EDGE ('', *, *, #6640, .F.);
#12490 = EDGE_LOOP ('', (#12450, #12460, #12470, #12480));
#12500 = FACE_OUTER_BOUND ('', #12490, .T.);
#12510 = CARTESIAN_POINT ('', (-0.708106781186537, 49.001, -12.4935));
#12520 = CARTESIAN_POINT ('', (-0.708106781186537, -47.501, -12.4935));
#12530 = CARTESIAN_POINT ('', (-0.493974746830556, 49.001, -12.279367965644));
#12540 = CARTESIAN_POINT ('', (-0.493974746830556, -47.501, -12.279367965644));
#12550 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#12510, #12520), (#12530, #12540)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1.00141421356241, -0.698585786437642), (-96.501, 0.000999999999997669), .UNSPECIFIED.);
#12560 = ADVANCED_FACE ('', (#12500), #12550, .T.);
#12570 = ORIENTED_EDGE ('', *, *, #8810, .T.);
#12580 = ORIENTED_EDGE ('', *, *, #180, .F.);
#12590 = ORIENTED_EDGE ('', *, *, #6320, .F.);
#12600 = ORIENTED_EDGE ('', *, *, #4780, .F.);
#12610 = EDGE_LOOP ('', (#12570, #12580, #12590, #12600));
#12620 = FACE_OUTER_BOUND ('', #12610, .T.);
#12630 = CARTESIAN_POINT ('', (-0.00099999999996464, 49.001, 13.2006067811868));
#12640 = CARTESIAN_POINT ('', (-0.00099999999996464, -47.501, 13.2006067811868));
#12650 = CARTESIAN_POINT ('', (0.213132034356493, 49.001, 12.9864747468302));
#12660 = CARTESIAN_POINT ('', (0.213132034356493, -47.501, 12.9864747468302));
#12670 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#12630, #12640), (#12650, #12660)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00141421356237359, 0.301414213563188), (-96.501, 0.000999999999997669), .UNSPECIFIED.);
#12680 = ADVANCED_FACE ('', (#12620), #12670, .T.);
#12690 = ORIENTED_EDGE ('', *, *, #3410, .T.);
#12700 = ORIENTED_EDGE ('', *, *, #6380, .F.);
#12710 = ORIENTED_EDGE ('', *, *, #330, .T.);
#12720 = ORIENTED_EDGE ('', *, *, #8750, .T.);
#12730 = EDGE_LOOP ('', (#12690, #12700, #12710, #12720));
#12740 = FACE_OUTER_BOUND ('', #12730, .T.);
#12750 = CARTESIAN_POINT ('', (-0.493974746830336, 49.001, 12.2793679656439));
#12760 = CARTESIAN_POINT ('', (-0.493974746830336, -47.501, 12.2793679656439));
#12770 = CARTESIAN_POINT ('', (-0.708106781186257, 49.001, 12.4935));
#12780 = CARTESIAN_POINT ('', (-0.708106781186257, -47.501, 12.4935));
#12790 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#12750, #12760), (#12770, #12780)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.30141421356244, 0.00141421356237181), (-96.501, 0.000999999999997669), .UNSPECIFIED.);
#12800 = ADVANCED_FACE ('', (#12740), #12790, .T.);
#12810 = ORIENTED_EDGE ('', *, *, #8690, .T.);
#12820 = ORIENTED_EDGE ('', *, *, #2910, .T.);
#12830 = ORIENTED_EDGE ('', *, *, #4000, .T.);
#12840 = ORIENTED_EDGE ('', *, *, #3550, .T.);
#12850 = EDGE_LOOP ('', (#12810, #12820, #12830, #12840));
#12860 = FACE_OUTER_BOUND ('', #12850, .T.);
#12870 = CARTESIAN_POINT ('', (-16., 49.001, -12.4935));
#12880 = CARTESIAN_POINT ('', (-16., 49.001, 12.4935));
#12890 = CARTESIAN_POINT ('', (-16., 12.499, -12.4935));
#12900 = CARTESIAN_POINT ('', (-16., 12.499, 12.4935));
#12910 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#12870, #12880), (#12890, #12900)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (19.999, 56.501), (-12.4935, 12.4935), .UNSPECIFIED.);
#12920 = ADVANCED_FACE ('', (#12860), #12910, .T.);
#12930 = ORIENTED_EDGE ('', *, *, #2770, .T.);
#12940 = CARTESIAN_POINT ('', (-12.1, 12.7, -12.4925));
#12950 = CARTESIAN_POINT ('', (-12.1, 12.7, 12.4925));
#12960 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#12940, #12950), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#12970 = EDGE_CURVE ('', #2660, #3650, #12960, .T.);
#12980 = ORIENTED_EDGE ('', *, *, #12970, .T.);
#12990 = ORIENTED_EDGE ('', *, *, #3690, .F.);
#13000 = ORIENTED_EDGE ('', *, *, #3940, .F.);
#13010 = EDGE_LOOP ('', (#12930, #12980, #12990, #13000));
#13020 = FACE_OUTER_BOUND ('', #13010, .T.);
#13030 = CARTESIAN_POINT ('', (-12.1, 12.499, -12.4935));
#13040 = CARTESIAN_POINT ('', (-12.1, 12.499, 12.4935));
#13050 = CARTESIAN_POINT ('', (-12.1, 12.701, -12.4935));
#13060 = CARTESIAN_POINT ('', (-12.1, 12.701, 12.4935));
#13070 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#13030, #13040), (#13050, #13060)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (1.799, 2.001), (38.5075, 63.4945), .UNSPECIFIED.);
#13080 = ADVANCED_FACE ('', (#13020), #13070, .T.);
#13090 = ORIENTED_EDGE ('', *, *, #2700, .T.);
#13100 = CARTESIAN_POINT ('', (-6.125, 12.7, -12.4925));
#13110 = CARTESIAN_POINT ('', (-6.125, 12.7, 12.4925));
#13120 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#13100, #13110), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#13130 = EDGE_CURVE ('', #2590, #3720, #13120, .T.);
#13140 = ORIENTED_EDGE ('', *, *, #13130, .T.);
#13150 = ORIENTED_EDGE ('', *, *, #3760, .F.);
#13160 = ORIENTED_EDGE ('', *, *, #12970, .F.);
#13170 = EDGE_LOOP ('', (#13090, #13140, #13150, #13160));
#13180 = FACE_OUTER_BOUND ('', #13170, .T.);
#13190 = CARTESIAN_POINT ('', (-12.101, 12.7, -12.4935));
#13200 = CARTESIAN_POINT ('', (-12.101, 12.7, 12.4935));
#13210 = CARTESIAN_POINT ('', (-6.124, 12.7, -12.4935));
#13220 = CARTESIAN_POINT ('', (-6.124, 12.7, 12.4935));
#13230 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#13190, #13200), (#13210, #13220)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.000999999999999446, 5.976), (38.5075, 63.4945), .UNSPECIFIED.);
#13240 = ADVANCED_FACE ('', (#13180), #13230, .T.);
#13250 = ORIENTED_EDGE ('', *, *, #2630, .T.);
#13260 = ORIENTED_EDGE ('', *, *, #4140, .F.);
#13270 = ORIENTED_EDGE ('', *, *, #3810, .F.);
#13280 = ORIENTED_EDGE ('', *, *, #13130, .F.);
#13290 = EDGE_LOOP ('', (#13250, #13260, #13270, #13280));
#13300 = FACE_OUTER_BOUND ('', #13290, .T.);
#13310 = CARTESIAN_POINT ('', (-6.125, 12.701, -12.4935));
#13320 = CARTESIAN_POINT ('', (-6.125, 12.701, 12.4935));
#13330 = CARTESIAN_POINT ('', (-6.125, 12.499, -12.4935));
#13340 = CARTESIAN_POINT ('', (-6.125, 12.499, 12.4935));
#13350 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#13310, #13320), (#13330, #13340)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-2.001, -1.799), (38.5075, 63.4945), .UNSPECIFIED.);
#13360 = ADVANCED_FACE ('', (#13300), #13350, .T.);
#13370 = ORIENTED_EDGE ('', *, *, #4340, .F.);
#13380 = ORIENTED_EDGE ('', *, *, #12170, .F.);
#13390 = ORIENTED_EDGE ('', *, *, #6460, .F.);
#13400 = ORIENTED_EDGE ('', *, *, #3270, .F.);
#13410 = EDGE_LOOP ('', (#13370, #13380, #13390, #13400));
#13420 = FACE_OUTER_BOUND ('', #13410, .T.);
#13430 = CARTESIAN_POINT ('', (-5.92600000000001, 12.501, 12.0915));
#13440 = CARTESIAN_POINT ('', (-5.52400000000002, 12.501, 12.4935));
#13450 = CARTESIAN_POINT ('', (-5.92600000000001, -47.501, 12.0915));
#13460 = CARTESIAN_POINT ('', (-5.52400000000002, -47.501, 12.4935));
#13470 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#13430, #13440), (#13450, #13460)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.000999999999997669, 60.001), (-0.567099638511603, 0.00141421356237359), .UNSPECIFIED.);
#13480 = ADVANCED_FACE ('', (#13420), #13470, .T.);
#13490 = ORIENTED_EDGE ('', *, *, #6580, .F.);
#13500 = ORIENTED_EDGE ('', *, *, #12230, .F.);
#13510 = ORIENTED_EDGE ('', *, *, #4220, .F.);
#13520 = ORIENTED_EDGE ('', *, *, #2490, .F.);
#13530 = EDGE_LOOP ('', (#13490, #13500, #13510, #13520));
#13540 = FACE_OUTER_BOUND ('', #13530, .T.);
#13550 = CARTESIAN_POINT ('', (-5.926, -47.501, -12.0915));
#13560 = CARTESIAN_POINT ('', (-5.52400000000002, -47.501, -12.4935));
#13570 = CARTESIAN_POINT ('', (-5.926, 12.501, -12.0915));
#13580 = CARTESIAN_POINT ('', (-5.52400000000002, 12.501, -12.4935));
#13590 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#13550, #13560), (#13570, #13580)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-60.001, 0.000999999999997669), (-0.567099638511597, 0.00141421356237892), .UNSPECIFIED.);
#13600 = ADVANCED_FACE ('', (#13540), #13590, .T.);
#13610 = ORIENTED_EDGE ('', *, *, #5500, .F.);
#13620 = ORIENTED_EDGE ('', *, *, #9280, .F.);
#13630 = ORIENTED_EDGE ('', *, *, #10470, .F.);
#13640 = ORIENTED_EDGE ('', *, *, #4590, .F.);
#13650 = ORIENTED_EDGE ('', *, *, #6260, .F.);
#13660 = EDGE_LOOP ('', (#13610, #13620, #13630, #13640, #13650));
#13670 = FACE_OUTER_BOUND ('', #13660, .T.);
#13680 = CARTESIAN_POINT ('', (25.001, -47.501, 45.999));
#13690 = CARTESIAN_POINT ('', (-0.00100000000000122, -47.501, 45.999));
#13700 = CARTESIAN_POINT ('', (25.001, -42.499, 51.001));
#13710 = CARTESIAN_POINT ('', (-0.00100000000000122, -42.499, 51.001));
#13720 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#13680, #13690), (#13700, #13710)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-7.07248202542785, 0.00141421356237004), (-0.00100000000000122, 25.001), .UNSPECIFIED.);
#13730 = ADVANCED_FACE ('', (#13670), #13720, .T.);
#13740 = ORIENTED_EDGE ('', *, *, #5930, .F.);
#13750 = ORIENTED_EDGE ('', *, *, #6840, .F.);
#13760 = ORIENTED_EDGE ('', *, *, #9620, .F.);
#13770 = ORIENTED_EDGE ('', *, *, #10310, .F.);
#13780 = ORIENTED_EDGE ('', *, *, #7280, .F.);
#13790 = EDGE_LOOP ('', (#13740, #13750, #13760, #13770, #13780));
#13800 = FACE_OUTER_BOUND ('', #13790, .T.);
#13810 = CARTESIAN_POINT ('', (25.001, -42.499, -51.001));
#13820 = CARTESIAN_POINT ('', (-0.00100000000000122, -42.499, -51.001));
#13830 = CARTESIAN_POINT ('', (25.001, -47.501, -45.999));
#13840 = CARTESIAN_POINT ('', (-0.00100000000000122, -47.501, -45.999));
#13850 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#13810, #13820), (#13830, #13840)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-7.07248202542785, 0.00141421356237004), (-0.00100000000000122, 25.001), .UNSPECIFIED.);
#13860 = ADVANCED_FACE ('', (#13800), #13850, .T.);
#13870 = ORIENTED_EDGE ('', *, *, #7080, .T.);
#13880 = CARTESIAN_POINT ('', (24.5, 41., -15.495));
#13890 = VERTEX_POINT ('', #13880);
#13900 = CARTESIAN_POINT ('', (24.5, 41., -15.495));
#13910 = CARTESIAN_POINT ('', (24.5, 41., -51.));
#13920 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#13900, #13910), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#13930 = EDGE_CURVE ('', #13890, #7040, #13920, .T.);
#13940 = ORIENTED_EDGE ('', *, *, #13930, .F.);
#13950 = CARTESIAN_POINT ('', (25.3665881374679, 41., -15.4));
#13960 = VERTEX_POINT ('', #13950);
#13970 = CARTESIAN_POINT ('', (24.5, 41., -15.495));
#13980 = CARTESIAN_POINT ('', (24.938501271331, 41., -15.495));
#13990 = CARTESIAN_POINT ('', (25.3665881374679, 41., -15.4));
#14000 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#13970, #13980, #13990), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (270., 282.512173147338), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.994044767603552, 1.))
   REPRESENTATION_ITEM ('')
);
#14010 = EDGE_CURVE ('', #13890, #13960, #14000, .T.);
#14020 = ORIENTED_EDGE ('', *, *, #14010, .T.);
#14030 = CARTESIAN_POINT ('', (57.4, 41., -15.4));
#14040 = CARTESIAN_POINT ('', (25.3665881374679, 41., -15.4));
#14050 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#14030, #14040), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#14060 = EDGE_CURVE ('', #10740, #13960, #14050, .T.);
#14070 = ORIENTED_EDGE ('', *, *, #14060, .F.);
#14080 = ORIENTED_EDGE ('', *, *, #10780, .F.);
#14090 = EDGE_LOOP ('', (#13870, #13940, #14020, #14070, #14080));
#14100 = FACE_OUTER_BOUND ('', #14090, .T.);
#14110 = CARTESIAN_POINT ('', (57.401, 41., -51.001));
#14120 = CARTESIAN_POINT ('', (57.401, 41., -15.399));
#14130 = CARTESIAN_POINT ('', (24.499, 41., -51.001));
#14140 = CARTESIAN_POINT ('', (24.499, 41., -15.399));
#14150 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#14110, #14120), (#14130, #14140)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-29.901, 3.001), (-56.501, -20.899), .UNSPECIFIED.);
#14160 = ADVANCED_FACE ('', (#14100), #14150, .T.);
#14170 = ORIENTED_EDGE ('', *, *, #7890, .F.);
#14180 = CARTESIAN_POINT ('', (46.5324855787281, 46., 8.49999999999999));
#14190 = VERTEX_POINT ('', #14180);
#14200 = CARTESIAN_POINT ('', (46.5324855787281, 49., 8.49999999999999));
#14210 = CARTESIAN_POINT ('', (46.5324855787281, 46., 8.49999999999999));
#14220 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#14200, #14210), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#14230 = EDGE_CURVE ('', #7780, #14190, #14220, .T.);
#14240 = ORIENTED_EDGE ('', *, *, #14230, .T.);
#14250 = CARTESIAN_POINT ('', (49.5, 46., 8.49999999999999));
#14260 = CARTESIAN_POINT ('', (46.5324855787281, 46., 8.49999999999999));
#14270 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#14250, #14260), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#14280 = EDGE_CURVE ('', #2100, #14190, #14270, .T.);
#14290 = ORIENTED_EDGE ('', *, *, #14280, .F.);
#14300 = ORIENTED_EDGE ('', *, *, #2140, .F.);
#14310 = CARTESIAN_POINT ('', (31.8084219849035, 41., 8.5));
#14320 = VERTEX_POINT ('', #14310);
#14330 = CARTESIAN_POINT ('', (49.5, 41., 8.49999999999999));
#14340 = CARTESIAN_POINT ('', (31.8084219849035, 41., 8.5));
#14350 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#14330, #14340), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#14360 = EDGE_CURVE ('', #2080, #14320, #14350, .T.);
#14370 = ORIENTED_EDGE ('', *, *, #14360, .T.);
#14380 = CARTESIAN_POINT ('', (31.8084219849035, 41., 8.5));
#14390 = CARTESIAN_POINT ('', (31.8084219849035, 49., 8.5));
#14400 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#14380, #14390), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#14410 = EDGE_CURVE ('', #14320, #7850, #14400, .T.);
#14420 = ORIENTED_EDGE ('', *, *, #14410, .T.);
#14430 = EDGE_LOOP ('', (#14170, #14240, #14290, #14300, #14370, #14420));
#14440 = FACE_OUTER_BOUND ('', #14430, .T.);
#14450 = CARTESIAN_POINT ('', (31.8074219849035, 49.001, 8.49999999999999));
#14460 = CARTESIAN_POINT ('', (31.8074219849035, 40.999, 8.49999999999999));
#14470 = CARTESIAN_POINT ('', (49.501, 49.001, 8.49999999999999));
#14480 = CARTESIAN_POINT ('', (49.501, 40.999, 8.49999999999999));
#14490 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#14450, #14460), (#14470, #14480)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (4.999, 22.6925780150965), (-8.001, 0.000999999999997669), .UNSPECIFIED.);
#14500 = ADVANCED_FACE ('', (#14440), #14490, .T.);
#14510 = ORIENTED_EDGE ('', *, *, #8370, .F.);
#14520 = CARTESIAN_POINT ('', (24.5, 41., -15.495));
#14530 = CARTESIAN_POINT ('', (24.5, 49., -15.495));
#14540 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#14520, #14530), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#14550 = EDGE_CURVE ('', #13890, #8270, #14540, .T.);
#14560 = ORIENTED_EDGE ('', *, *, #14550, .F.);
#14570 = ORIENTED_EDGE ('', *, *, #13930, .T.);
#14580 = ORIENTED_EDGE ('', *, *, #7470, .F.);
#14590 = EDGE_LOOP ('', (#14510, #14560, #14570, #14580));
#14600 = FACE_OUTER_BOUND ('', #14590, .T.);
#14610 = CARTESIAN_POINT ('', (24.5, 40.999, -51.001));
#14620 = CARTESIAN_POINT ('', (24.5, 40.999, -15.494));
#14630 = CARTESIAN_POINT ('', (24.5, 49.001, -51.001));
#14640 = CARTESIAN_POINT ('', (24.5, 49.001, -15.494));
#14650 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#14610, #14620), (#14630, #14640)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-8.001, 0.000999999999997669), (-21.001, 14.506), .UNSPECIFIED.);
#14660 = ADVANCED_FACE ('', (#14600), #14650, .T.);
#14670 = CARTESIAN_POINT ('', (24.5, 41., 1.19157801509648));
#14680 = VERTEX_POINT ('', #14670);
#14690 = CARTESIAN_POINT ('', (24.5, 41., 1.19157801509648));
#14700 = CARTESIAN_POINT ('', (24.5, 49., 1.19157801509648));
#14710 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#14690, #14700), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#14720 = EDGE_CURVE ('', #14680, #8040, #14710, .T.);
#14730 = ORIENTED_EDGE ('', *, *, #14720, .F.);
#14740 = CARTESIAN_POINT ('', (24.5, 41., -7.495));
#14750 = VERTEX_POINT ('', #14740);
#14760 = CARTESIAN_POINT ('', (24.5, 41., 1.19157801509648));
#14770 = CARTESIAN_POINT ('', (24.5, 41., -7.495));
#14780 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#14760, #14770), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#14790 = EDGE_CURVE ('', #14680, #14750, #14780, .T.);
#14800 = ORIENTED_EDGE ('', *, *, #14790, .T.);
#14810 = CARTESIAN_POINT ('', (24.5, 49., -7.495));
#14820 = CARTESIAN_POINT ('', (24.5, 41., -7.495));
#14830 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#14810, #14820), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#14840 = EDGE_CURVE ('', #8120, #14750, #14830, .T.);
#14850 = ORIENTED_EDGE ('', *, *, #14840, .F.);
#14860 = ORIENTED_EDGE ('', *, *, #8160, .F.);
#14870 = EDGE_LOOP ('', (#14730, #14800, #14850, #14860));
#14880 = FACE_OUTER_BOUND ('', #14870, .T.);
#14890 = CARTESIAN_POINT ('', (24.5, 40.999, -7.496));
#14900 = CARTESIAN_POINT ('', (24.5, 40.999, 1.19257801509648));
#14910 = CARTESIAN_POINT ('', (24.5, 49.001, -7.496));
#14920 = CARTESIAN_POINT ('', (24.5, 49.001, 1.19257801509648));
#14930 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#14890, #14900), (#14910, #14920)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-8.001, 0.000999999999997669), (22.504, 31.1925780150965), .UNSPECIFIED.);
#14940 = ADVANCED_FACE ('', (#14880), #14930, .T.);
#14950 = CARTESIAN_POINT ('', (22.25, 41., 5.50000000000001));
#14960 = VERTEX_POINT ('', #14950);
#14970 = CARTESIAN_POINT ('', (22.25, 49., 5.5));
#14980 = CARTESIAN_POINT ('', (22.25, 41., 5.5));
#14990 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#14970, #14980), .UNSPECIFIED., .F., .U., (2, 2), (0.0834374739648417, 0.916562526035159), .UNSPECIFIED.);
#15000 = EDGE_CURVE ('', #7920, #14960, #14990, .T.);
#15010 = ORIENTED_EDGE ('', *, *, #15000, .T.);
#15020 = CARTESIAN_POINT ('', (22.25, 41., 5.50000000000001));
#15030 = CARTESIAN_POINT ('', (22.25, 41., 2.75827691869776));
#15040 = CARTESIAN_POINT ('', (24.5, 41., 1.19157801509648));
#15050 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#15020, #15030, #15040), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (180.361227485736, 235.150095420954), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.951421373703378, 0.864607058178832, 1.))
   REPRESENTATION_ITEM ('')
);
#15060 = EDGE_CURVE ('', #14960, #14680, #15050, .T.);
#15070 = ORIENTED_EDGE ('', *, *, #15060, .T.);
#15080 = ORIENTED_EDGE ('', *, *, #14720, .T.);
#15090 = ORIENTED_EDGE ('', *, *, #8090, .F.);
#15100 = EDGE_LOOP ('', (#15010, #15070, #15080, #15090));
#15110 = FACE_OUTER_BOUND ('', #15100, .T.);
#15120 = CARTESIAN_POINT ('', (22.25, 40.1988, 5.5));
#15130 = CARTESIAN_POINT ('', (22.25, 49.8012, 5.5));
#15140 = CARTESIAN_POINT ('', (22.25, 40.1988, 0.249999999999999));
#15150 = CARTESIAN_POINT ('', (22.25, 49.8012, 0.25));
#15160 = CARTESIAN_POINT ('', (27.5, 40.1988, 0.250000000000001));
#15170 = CARTESIAN_POINT ('', (27.5, 49.8012, 0.250000000000002));
#15180 = CARTESIAN_POINT ('', (32.75, 40.1988, 0.250000000000002));
#15190 = CARTESIAN_POINT ('', (32.75, 49.8012, 0.250000000000003));
#15200 = CARTESIAN_POINT ('', (32.75, 40.1988, 5.5));
#15210 = CARTESIAN_POINT ('', (32.75, 49.8012, 5.5));
#15220 = CARTESIAN_POINT ('', (32.75, 40.1988, 10.75));
#15230 = CARTESIAN_POINT ('', (32.75, 49.8012, 10.75));
#15240 = CARTESIAN_POINT ('', (27.5, 40.1988, 10.75));
#15250 = CARTESIAN_POINT ('', (27.5, 49.8012, 10.75));
#15260 = CARTESIAN_POINT ('', (22.25, 40.1988, 10.75));
#15270 = CARTESIAN_POINT ('', (22.25, 49.8012, 10.75));
#15280 = CARTESIAN_POINT ('', (22.25, 40.1988, 5.5));
#15290 = CARTESIAN_POINT ('', (22.25, 49.8012, 5.5));
#15300 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#15120, #15130), (#15140, #15150), (#15160, #15170), (#15180, #15190), (#15200, #15210), (#15220, #15230), (#15240, #15250), (#15260, #15270), (#15280, #15290)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#15310 = ADVANCED_FACE ('', (#15110), #15300, .T.);
#15320 = CARTESIAN_POINT ('', (20.5, 38., -11.495));
#15330 = VERTEX_POINT ('', #15320);
#15340 = CARTESIAN_POINT ('', (20.5, 49., -11.495));
#15350 = CARTESIAN_POINT ('', (20.5, 38., -11.495));
#15360 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#15340, #15350), .UNSPECIFIED., .F., .U., (2, 2), (0.08340907713749, 0.916590922862509), .UNSPECIFIED.);
#15370 = EDGE_CURVE ('', #8190, #15330, #15360, .T.);
#15380 = ORIENTED_EDGE ('', *, *, #15370, .T.);
#15390 = CARTESIAN_POINT ('', (26.893318825397, 38., -14.7));
#15400 = VERTEX_POINT ('', #15390);
#15410 = CARTESIAN_POINT ('', (20.5, 38., -11.495));
#15420 = CARTESIAN_POINT ('', (20.5, 38., -13.0404819620581));
#15430 = CARTESIAN_POINT ('', (21.5391332027131, 38., -14.184473518874));
#15440 = CARTESIAN_POINT ('', (23.9820893719513, 38., -16.8739470377479));
#15450 = CARTESIAN_POINT ('', (26.893318825397, 38., -14.7));
#15460 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#15410, #15420, #15430, #15440, #15450), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 222.250121701037, 306.750365103112), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.870108349660857, 0.870108349660857, 1., 0.740216699321715, 1.))
   REPRESENTATION_ITEM ('')
);
#15470 = EDGE_CURVE ('', #15330, #15400, #15460, .T.);
#15480 = ORIENTED_EDGE ('', *, *, #15470, .T.);
#15490 = CARTESIAN_POINT ('', (26.4274270414208, 38.3, -15.));
#15500 = VERTEX_POINT ('', #15490);
#15510 = CARTESIAN_POINT ('', (26.893318825397, 38., -14.7));
#15520 = CARTESIAN_POINT ('', (26.8162504771622, 38., -14.7575504301631));
#15530 = CARTESIAN_POINT ('', (26.7358615060347, 38.0160491397855, -14.8130088709086));
#15540 = CARTESIAN_POINT ('', (26.6593599610111, 38.0475458176328, -14.8620706198092));
#15550 = CARTESIAN_POINT ('', (26.6192989540444, 38.0640394535493, -14.887762428568));
#15560 = CARTESIAN_POINT ('', (26.5796510200285, 38.085064404462, -14.9121418697888));
#15570 = CARTESIAN_POINT ('', (26.5431063871053, 38.1120842115057, -14.9338539211443));
#15580 = CARTESIAN_POINT ('', (26.5169197757253, 38.1314456643379, -14.9494120210793));
#15590 = CARTESIAN_POINT ('', (26.4918393660769, 38.1542516490416, -14.9638815716563));
#15600 = CARTESIAN_POINT ('', (26.4711852314292, 38.1814406268572, -14.9755788000554));
#15610 = CARTESIAN_POINT ('', (26.4588657889111, 38.1976578664094, -14.9825557727218));
#15620 = CARTESIAN_POINT ('', (26.4479782160041, 38.2157705026009, -14.9886313940278));
#15630 = CARTESIAN_POINT ('', (26.4401836140463, 38.2353663773409, -14.9929547658291));
#15640 = CARTESIAN_POINT ('', (26.4338447275758, 38.2513025375116, -14.9964707071389));
#15650 = CARTESIAN_POINT ('', (26.4294979530106, 38.268590718583, -14.9988607984904));
#15660 = CARTESIAN_POINT ('', (26.4280198824767, 38.2860165228947, -14.9996739267405));
#15670 = CARTESIAN_POINT ('', (26.4276258986303, 38.2906614199089, -14.9998906683561));
#15680 = CARTESIAN_POINT ('', (26.4274270414208, 38.2953333879022, -15.));
#15690 = CARTESIAN_POINT ('', (26.4274270414208, 38.3, -15.));
#15700 = B_SPLINE_CURVE_WITH_KNOTS ('', 3, (#15510, #15520, #15530, #15540, #15550, #15560, #15570, #15580, #15590, #15600, #15610, #15620, #15630, #15640, #15650, #15660, #15670, #15680, #15690), .UNSPECIFIED., .F., .U., (4, 3, 3, 3, 3, 3, 4), (0., 0.427419155571921, 0.649268721576674, 0.808308767028908, 0.902848531303704, 0.979772267384372, 1.), .UNSPECIFIED.);
#15710 = EDGE_CURVE ('', #15400, #15500, #15700, .T.);
#15720 = ORIENTED_EDGE ('', *, *, #15710, .T.);
#15730 = CARTESIAN_POINT ('', (26.4274270414208, 40.6, -15.));
#15740 = VERTEX_POINT ('', #15730);
#15750 = CARTESIAN_POINT ('', (26.4274270414208, 38.3, -15.));
#15760 = CARTESIAN_POINT ('', (26.4274270414208, 40.6, -15.));
#15770 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#15750, #15760), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#15780 = EDGE_CURVE ('', #15500, #15740, #15770, .T.);
#15790 = ORIENTED_EDGE ('', *, *, #15780, .T.);
#15800 = CARTESIAN_POINT ('', (25.3665881374679, 41., -15.4));
#15810 = CARTESIAN_POINT ('', (25.738027144096, 40.917571155714, -15.317571155714));
#15820 = CARTESIAN_POINT ('', (26.0940355642808, 40.7833345929868, -15.1833345929868));
#15830 = CARTESIAN_POINT ('', (26.4274270414208, 40.6, -15.));
#15840 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#15800, #15810, #15820, #15830), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.993271360831307, 0.993271360831307, 1.))
   REPRESENTATION_ITEM ('')
);
#15850 = EDGE_CURVE ('', #13960, #15740, #15840, .T.);
#15860 = ORIENTED_EDGE ('', *, *, #15850, .F.);
#15870 = ORIENTED_EDGE ('', *, *, #14010, .F.);
#15880 = ORIENTED_EDGE ('', *, *, #14550, .T.);
#15890 = ORIENTED_EDGE ('', *, *, #8320, .F.);
#15900 = EDGE_LOOP ('', (#15380, #15480, #15720, #15790, #15860, #15870, #15880, #15890));
#15910 = FACE_OUTER_BOUND ('', #15900, .T.);
#15920 = CARTESIAN_POINT ('', (20.5, 36.8988, -11.495));
#15930 = CARTESIAN_POINT ('', (20.5, 50.1012, -11.495));
#15940 = CARTESIAN_POINT ('', (20.5, 36.8988, -15.495));
#15950 = CARTESIAN_POINT ('', (20.5, 50.1012, -15.495));
#15960 = CARTESIAN_POINT ('', (24.5, 36.8988, -15.495));
#15970 = CARTESIAN_POINT ('', (24.5, 50.1012, -15.495));
#15980 = CARTESIAN_POINT ('', (28.5, 36.8988, -15.495));
#15990 = CARTESIAN_POINT ('', (28.5, 50.1012, -15.495));
#16000 = CARTESIAN_POINT ('', (28.5, 36.8988, -11.495));
#16010 = CARTESIAN_POINT ('', (28.5, 50.1012, -11.495));
#16020 = CARTESIAN_POINT ('', (28.5, 36.8988, -7.49500000000001));
#16030 = CARTESIAN_POINT ('', (28.5, 50.1012, -7.49500000000001));
#16040 = CARTESIAN_POINT ('', (24.5, 36.8988, -7.495));
#16050 = CARTESIAN_POINT ('', (24.5, 50.1012, -7.495));
#16060 = CARTESIAN_POINT ('', (20.5, 36.8988, -7.495));
#16070 = CARTESIAN_POINT ('', (20.5, 50.1012, -7.495));
#16080 = CARTESIAN_POINT ('', (20.5, 36.8988, -11.495));
#16090 = CARTESIAN_POINT ('', (20.5, 50.1012, -11.495));
#16100 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#15920, #15930), (#15940, #15950), (#15960, #15970), (#15980, #15990), (#16000, #16010), (#16020, #16030), (#16040, #16050), (#16060, #16070), (#16080, #16090)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#16110 = ADVANCED_FACE ('', (#15910), #16100, .T.);
#16120 = ORIENTED_EDGE ('', *, *, #10640, .F.);
#16130 = CARTESIAN_POINT ('', (25.3665881374679, 41., -7.59));
#16140 = VERTEX_POINT ('', #16130);
#16150 = CARTESIAN_POINT ('', (25.3665881374679, 41., -7.59));
#16160 = CARTESIAN_POINT ('', (57.4, 41., -7.59000000000001));
#16170 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#16150, #16160), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#16180 = EDGE_CURVE ('', #16140, #10600, #16170, .T.);
#16190 = ORIENTED_EDGE ('', *, *, #16180, .F.);
#16200 = CARTESIAN_POINT ('', (25.3665881374679, 41., -7.59000000000002));
#16210 = CARTESIAN_POINT ('', (24.938501271331, 41., -7.49500000000001));
#16220 = CARTESIAN_POINT ('', (24.5, 41., -7.49500000000001));
#16230 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#16200, #16210, #16220), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (77.4878268526621, 90.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.994044767603552, 1.))
   REPRESENTATION_ITEM ('')
);
#16240 = EDGE_CURVE ('', #16140, #14750, #16230, .T.);
#16250 = ORIENTED_EDGE ('', *, *, #16240, .T.);
#16260 = ORIENTED_EDGE ('', *, *, #14790, .F.);
#16270 = ORIENTED_EDGE ('', *, *, #15060, .F.);
#16280 = CARTESIAN_POINT ('', (31.8084219849035, 41., 8.50000000000001));
#16290 = CARTESIAN_POINT ('', (29.831535908269, 41., 11.339086478074));
#16300 = CARTESIAN_POINT ('', (26.4428478422666, 41., 10.6424633509049));
#16310 = CARTESIAN_POINT ('', (23.0541597762642, 41., 9.94584022373576));
#16320 = CARTESIAN_POINT ('', (22.3575366490951, 41., 6.55715215773338));
#16330 = CARTESIAN_POINT ('', (22.25, 41., 6.03404555211802));
#16340 = CARTESIAN_POINT ('', (22.25, 41., 5.50000000000001));
#16350 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#16280, #16290, #16300, #16310, #16320, #16330, #16340), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 3), (34.8499045790466, 101.616634859682, 168.383365140318, 180.361227485736), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.835007650839503, 1., 0.835007650839503, 1., 0.970400592660671, 0.951421373703378))
   REPRESENTATION_ITEM ('')
);
#16360 = EDGE_CURVE ('', #14320, #14960, #16350, .T.);
#16370 = ORIENTED_EDGE ('', *, *, #16360, .F.);
#16380 = ORIENTED_EDGE ('', *, *, #14360, .F.);
#16390 = ORIENTED_EDGE ('', *, *, #2250, .T.);
#16400 = ORIENTED_EDGE ('', *, *, #1530, .F.);
#16410 = EDGE_LOOP ('', (#16120, #16190, #16250, #16260, #16270, #16370, #16380, #16390, #16400));
#16420 = FACE_OUTER_BOUND ('', #16410, .T.);
#16430 = CARTESIAN_POINT ('', (57.401, 41., -7.59100000000002));
#16440 = CARTESIAN_POINT ('', (57.401, 41., 17.4158533814943));
#16450 = CARTESIAN_POINT ('', (21.659913521926, 41., -7.59100000000002));
#16460 = CARTESIAN_POINT ('', (21.659913521926, 41., 17.4158533814943));
#16470 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#16430, #16440), (#16450, #16460)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-29.901, 5.84008647807396), (-13.091, 11.9158533814943), .UNSPECIFIED.);
#16480 = ADVANCED_FACE ('', (#16420), #16470, .T.);
#16490 = ORIENTED_EDGE ('', *, *, #15780, .F.);
#16500 = CARTESIAN_POINT ('', (26.4274270414208, 38.3, -15.));
#16510 = CARTESIAN_POINT ('', (57.4, 38.3, -15.));
#16520 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#16500, #16510), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#16530 = EDGE_CURVE ('', #15500, #10880, #16520, .T.);
#16540 = ORIENTED_EDGE ('', *, *, #16530, .T.);
#16550 = ORIENTED_EDGE ('', *, *, #10920, .F.);
#16560 = CARTESIAN_POINT ('', (26.4274270414208, 40.6, -15.));
#16570 = CARTESIAN_POINT ('', (57.4, 40.6, -15.));
#16580 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#16560, #16570), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#16590 = EDGE_CURVE ('', #15740, #10810, #16580, .T.);
#16600 = ORIENTED_EDGE ('', *, *, #16590, .F.);
#16610 = EDGE_LOOP ('', (#16490, #16540, #16550, #16600));
#16620 = FACE_OUTER_BOUND ('', #16610, .T.);
#16630 = CARTESIAN_POINT ('', (57.401, 40.601, -15.));
#16640 = CARTESIAN_POINT ('', (57.401, 38.299, -15.));
#16650 = CARTESIAN_POINT ('', (26.4264270414208, 40.601, -15.));
#16660 = CARTESIAN_POINT ('', (26.4264270414208, 38.299, -15.));
#16670 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#16630, #16640), (#16650, #16660)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00100000000000122, 30.9735729585792), (-2.601, -0.298999999999999), .UNSPECIFIED.);
#16680 = ADVANCED_FACE ('', (#16620), #16670, .T.);
#16690 = ORIENTED_EDGE ('', *, *, #11220, .F.);
#16700 = CARTESIAN_POINT ('', (26.4274270414208, 38.3, -7.99));
#16710 = VERTEX_POINT ('', #16700);
#16720 = CARTESIAN_POINT ('', (57.4, 38.3, -7.99000000000001));
#16730 = CARTESIAN_POINT ('', (26.4274270414208, 38.3, -7.99));
#16740 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#16720, #16730), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#16750 = EDGE_CURVE ('', #11100, #16710, #16740, .T.);
#16760 = ORIENTED_EDGE ('', *, *, #16750, .T.);
#16770 = CARTESIAN_POINT ('', (26.4274270414208, 40.6, -7.99));
#16780 = VERTEX_POINT ('', #16770);
#16790 = CARTESIAN_POINT ('', (26.4274270414208, 38.3, -7.99));
#16800 = CARTESIAN_POINT ('', (26.4274270414208, 40.6, -7.99));
#16810 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#16790, #16800), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#16820 = EDGE_CURVE ('', #16710, #16780, #16810, .T.);
#16830 = ORIENTED_EDGE ('', *, *, #16820, .T.);
#16840 = CARTESIAN_POINT ('', (57.4, 40.6, -7.99000000000001));
#16850 = CARTESIAN_POINT ('', (26.4274270414208, 40.6, -7.99));
#16860 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#16840, #16850), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#16870 = EDGE_CURVE ('', #11180, #16780, #16860, .T.);
#16880 = ORIENTED_EDGE ('', *, *, #16870, .F.);
#16890 = EDGE_LOOP ('', (#16690, #16760, #16830, #16880));
#16900 = FACE_OUTER_BOUND ('', #16890, .T.);
#16910 = CARTESIAN_POINT ('', (26.4264270414208, 40.601, -7.99));
#16920 = CARTESIAN_POINT ('', (26.4264270414208, 38.299, -7.99));
#16930 = CARTESIAN_POINT ('', (57.401, 40.601, -7.99));
#16940 = CARTESIAN_POINT ('', (57.401, 38.299, -7.99));
#16950 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#16910, #16920), (#16930, #16940)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-30.9735729585792, 0.00100000000000122), (-2.601, -0.298999999999999), .UNSPECIFIED.);
#16960 = ADVANCED_FACE ('', (#16900), #16950, .T.);
#16970 = CARTESIAN_POINT ('', (26.893318825397, 38., -8.29));
#16980 = VERTEX_POINT ('', #16970);
#16990 = CARTESIAN_POINT ('', (26.893318825397, 38., -8.28999999999997));
#17000 = CARTESIAN_POINT ('', (23.9820893719513, 38., -6.1160529622521));
#17010 = CARTESIAN_POINT ('', (21.5391332027131, 38., -8.80552648112606));
#17020 = CARTESIAN_POINT ('', (20.5, 38., -9.94951803794193));
#17030 = CARTESIAN_POINT ('', (20.5, 38., -11.495));
#17040 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#16990, #17000, #17010, #17020, #17030), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (53.2496348968878, 137.749878298963, 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.740216699321715, 1., 0.870108349660857, 0.870108349660857))
   REPRESENTATION_ITEM ('')
);
#17050 = EDGE_CURVE ('', #16980, #15330, #17040, .T.);
#17060 = ORIENTED_EDGE ('', *, *, #17050, .F.);
#17070 = CARTESIAN_POINT ('', (26.893318825397, 38., -8.29));
#17080 = CARTESIAN_POINT ('', (57.4, 38., -8.29));
#17090 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#17070, #17080), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#17100 = EDGE_CURVE ('', #16980, #11030, #17090, .T.);
#17110 = ORIENTED_EDGE ('', *, *, #17100, .T.);
#17120 = ORIENTED_EDGE ('', *, *, #11070, .F.);
#17130 = CARTESIAN_POINT ('', (57.4, 38., -14.7));
#17140 = CARTESIAN_POINT ('', (26.893318825397, 38., -14.7));
#17150 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#17130, #17140), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#17160 = EDGE_CURVE ('', #10950, #15400, #17150, .T.);
#17170 = ORIENTED_EDGE ('', *, *, #17160, .T.);
#17180 = ORIENTED_EDGE ('', *, *, #15470, .F.);
#17190 = EDGE_LOOP ('', (#17060, #17110, #17120, #17170, #17180));
#17200 = FACE_OUTER_BOUND ('', #17190, .T.);
#17210 = CARTESIAN_POINT ('', (57.401, 38., -16.8749470377479));
#17220 = CARTESIAN_POINT ('', (57.401, 38., -6.11505296225209));
#17230 = CARTESIAN_POINT ('', (19.095177033475, 38., -16.8749470377479));
#17240 = CARTESIAN_POINT ('', (19.095177033475, 38., -6.11505296225209));
#17250 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#17210, #17220), (#17230, #17240)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-32.901, 5.40482296652499), (-5.37994703774791, 5.37994703774791), .UNSPECIFIED.);
#17260 = ADVANCED_FACE ('', (#17200), #17250, .T.);
#17270 = ORIENTED_EDGE ('', *, *, #16870, .T.);
#17280 = CARTESIAN_POINT ('', (26.4274270414208, 40.6, -7.99));
#17290 = CARTESIAN_POINT ('', (26.0940355642808, 40.7833345929868, -7.80666540701317));
#17300 = CARTESIAN_POINT ('', (25.738027144096, 40.917571155714, -7.672428844286));
#17310 = CARTESIAN_POINT ('', (25.3665881374679, 41., -7.59));
#17320 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (3, (#17280, #17290, #17300, #17310), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((4, 4), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.993271360831307, 0.993271360831307, 1.))
   REPRESENTATION_ITEM ('')
);
#17330 = EDGE_CURVE ('', #16780, #16140, #17320, .T.);
#17340 = ORIENTED_EDGE ('', *, *, #17330, .T.);
#17350 = ORIENTED_EDGE ('', *, *, #16180, .T.);
#17360 = ORIENTED_EDGE ('', *, *, #11270, .F.);
#17370 = EDGE_LOOP ('', (#17270, #17340, #17350, #17360));
#17380 = FACE_OUTER_BOUND ('', #17370, .T.);
#17390 = CARTESIAN_POINT ('', (57.401, 40.599, -7.99100000000001));
#17400 = CARTESIAN_POINT ('', (57.401, 41.001, -7.589));
#17410 = CARTESIAN_POINT ('', (25.3655881374679, 40.599, -7.991));
#17420 = CARTESIAN_POINT ('', (25.3655881374679, 41.001, -7.58899999999999));
#17430 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#17390, #17400), (#17410, #17420)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-30.9735729585792, 1.0618389039529), (-0.0014142135623807, 0.56709963851161), .UNSPECIFIED.);
#17440 = ADVANCED_FACE ('', (#17380), #17430, .T.);
#17450 = ORIENTED_EDGE ('', *, *, #14060, .T.);
#17460 = ORIENTED_EDGE ('', *, *, #15850, .T.);
#17470 = ORIENTED_EDGE ('', *, *, #16590, .T.);
#17480 = ORIENTED_EDGE ('', *, *, #10850, .F.);
#17490 = EDGE_LOOP ('', (#17450, #17460, #17470, #17480));
#17500 = FACE_OUTER_BOUND ('', #17490, .T.);
#17510 = CARTESIAN_POINT ('', (25.3655881374679, 40.599, -14.999));
#17520 = CARTESIAN_POINT ('', (25.3655881374679, 41.001, -15.401));
#17530 = CARTESIAN_POINT ('', (57.401, 40.599, -14.999));
#17540 = CARTESIAN_POINT ('', (57.401, 41.001, -15.401));
#17550 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#17510, #17520), (#17530, #17540)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1.0618389039529, 30.9735729585792), (-0.00141421356237714, 0.567099638511607), .UNSPECIFIED.);
#17560 = ADVANCED_FACE ('', (#17500), #17550, .T.);
#17570 = ORIENTED_EDGE ('', *, *, #11150, .F.);
#17580 = ORIENTED_EDGE ('', *, *, #17100, .F.);
#17590 = CARTESIAN_POINT ('', (26.4274270414208, 38.3, -7.99));
#17600 = CARTESIAN_POINT ('', (26.4274270414208, 38.2824591685979, -7.99));
#17610 = CARTESIAN_POINT ('', (26.4303675506007, 38.2647031763451, -7.99161352396319));
#17620 = CARTESIAN_POINT ('', (26.4355949710435, 38.2482107575969, -7.99450401970363));
#17630 = CARTESIAN_POINT ('', (26.4421368173145, 38.227571348682, -7.9981213255982));
#17640 = CARTESIAN_POINT ('', (26.4523075609341, 38.2082753120199, -8.00377079375456));
#17650 = CARTESIAN_POINT ('', (26.4641940642877, 38.1910798814303, -8.01047109671671));
#17660 = CARTESIAN_POINT ('', (26.4833533788217, 38.1633633483667, -8.02127101054376));
#17670 = CARTESIAN_POINT ('', (26.5073557172399, 38.1399780679556, -8.03503171721003));
#17680 = CARTESIAN_POINT ('', (26.5325763380305, 38.1201178003683, -8.04991169487947));
#17690 = CARTESIAN_POINT ('', (26.5794629439184, 38.0831964039076, -8.07757444174043));
#17700 = CARTESIAN_POINT ('', (26.6321803799726, 38.0567500433394, -8.11006726418575));
#17710 = CARTESIAN_POINT ('', (26.6849102582124, 38.0376719888002, -8.14445270686144));
#17720 = CARTESIAN_POINT ('', (26.7535772936038, 38.0128277545639, -8.1892308570863));
#17730 = CARTESIAN_POINT ('', (26.8246844759699, 38., -8.23874761917231));
#17740 = CARTESIAN_POINT ('', (26.893318825397, 38., -8.29));
#17750 = B_SPLINE_CURVE_WITH_KNOTS ('', 3, (#17590, #17600, #17610, #17620, #17630, #17640, #17650, #17660, #17670, #17680, #17690, #17700, #17710, #17720, #17730, #17740), .UNSPECIFIED., .F., .U., (4, 3, 3, 3, 3, 4), (0., 0.0769944420548746, 0.173412218242923, 0.32926595870788, 0.620317705391459, 1.), .UNSPECIFIED.);
#17760 = EDGE_CURVE ('', #16710, #16980, #17750, .T.);
#17770 = ORIENTED_EDGE ('', *, *, #17760, .F.);
#17780 = ORIENTED_EDGE ('', *, *, #16750, .F.);
#17790 = EDGE_LOOP ('', (#17570, #17580, #17770, #17780));
#17800 = FACE_OUTER_BOUND ('', #17790, .T.);
#17810 = CARTESIAN_POINT ('', (60.4984572958579, 38.3, -8.59));
#17820 = CARTESIAN_POINT ('', (23.3289697455629, 38.3, -8.59));
#17830 = CARTESIAN_POINT ('', (60.4984572958579, 38.6, -8.59000000000001));
#17840 = CARTESIAN_POINT ('', (23.3289697455629, 38.6, -8.59000000000001));
#17850 = CARTESIAN_POINT ('', (60.4984572958579, 38.6, -8.29000000000001));
#17860 = CARTESIAN_POINT ('', (23.3289697455629, 38.6, -8.29000000000001));
#17870 = CARTESIAN_POINT ('', (60.4984572958579, 38.6, -7.99000000000001));
#17880 = CARTESIAN_POINT ('', (23.3289697455629, 38.6, -7.99000000000001));
#17890 = CARTESIAN_POINT ('', (60.4984572958579, 38.3, -7.99));
#17900 = CARTESIAN_POINT ('', (23.3289697455629, 38.3, -7.99));
#17910 = CARTESIAN_POINT ('', (60.4984572958579, 38., -7.98999999999999));
#17920 = CARTESIAN_POINT ('', (23.3289697455629, 38., -7.98999999999999));
#17930 = CARTESIAN_POINT ('', (60.4984572958579, 38., -8.28999999999999));
#17940 = CARTESIAN_POINT ('', (23.3289697455629, 38., -8.28999999999999));
#17950 = CARTESIAN_POINT ('', (60.4984572958579, 38., -8.58999999999999));
#17960 = CARTESIAN_POINT ('', (23.3289697455629, 38., -8.58999999999999));
#17970 = CARTESIAN_POINT ('', (60.4984572958579, 38.3, -8.59));
#17980 = CARTESIAN_POINT ('', (23.3289697455629, 38.3, -8.59));
#17990 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#17810, #17820), (#17830, #17840), (#17850, #17860), (#17870, #17880), (#17890, #17900), (#17910, #17920), (#17930, #17940), (#17950, #17960), (#17970, #17980)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.250000000000002, 0.500000000000002, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#18000 = ADVANCED_FACE ('', (#17800), #17990, .T.);
#18010 = ORIENTED_EDGE ('', *, *, #15710, .F.);
#18020 = ORIENTED_EDGE ('', *, *, #17160, .F.);
#18030 = ORIENTED_EDGE ('', *, *, #11000, .F.);
#18040 = ORIENTED_EDGE ('', *, *, #16530, .F.);
#18050 = EDGE_LOOP ('', (#18010, #18020, #18030, #18040));
#18060 = FACE_OUTER_BOUND ('', #18050, .T.);
#18070 = CARTESIAN_POINT ('', (23.3289697455629, 38.3, -14.4));
#18080 = CARTESIAN_POINT ('', (60.4984572958579, 38.3, -14.4));
#18090 = CARTESIAN_POINT ('', (23.3289697455629, 38.6, -14.4));
#18100 = CARTESIAN_POINT ('', (60.4984572958579, 38.6, -14.4));
#18110 = CARTESIAN_POINT ('', (23.3289697455629, 38.6, -14.7));
#18120 = CARTESIAN_POINT ('', (60.4984572958579, 38.6, -14.7));
#18130 = CARTESIAN_POINT ('', (23.3289697455629, 38.6, -15.));
#18140 = CARTESIAN_POINT ('', (60.4984572958579, 38.6, -15.));
#18150 = CARTESIAN_POINT ('', (23.3289697455629, 38.3, -15.));
#18160 = CARTESIAN_POINT ('', (60.4984572958579, 38.3, -15.));
#18170 = CARTESIAN_POINT ('', (23.3289697455629, 38., -15.));
#18180 = CARTESIAN_POINT ('', (60.4984572958579, 38., -15.));
#18190 = CARTESIAN_POINT ('', (23.3289697455629, 38., -14.7));
#18200 = CARTESIAN_POINT ('', (60.4984572958579, 38., -14.7));
#18210 = CARTESIAN_POINT ('', (23.3289697455629, 38., -14.4));
#18220 = CARTESIAN_POINT ('', (60.4984572958579, 38., -14.4));
#18230 = CARTESIAN_POINT ('', (23.3289697455629, 38.3, -14.4));
#18240 = CARTESIAN_POINT ('', (60.4984572958579, 38.3, -14.4));
#18250 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#18070, #18080), (#18090, #18100), (#18110, #18120), (#18130, #18140), (#18150, #18160), (#18170, #18180), (#18190, #18200), (#18210, #18220), (#18230, #18240)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.500000000000002, 0.750000000000002, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#18260 = ADVANCED_FACE ('', (#18060), #18250, .T.);
#18270 = ORIENTED_EDGE ('', *, *, #7820, .T.);
#18280 = CARTESIAN_POINT ('', (16.1412427893639, 46., 38.8912427893639));
#18290 = VERTEX_POINT ('', #18280);
#18300 = CARTESIAN_POINT ('', (16.1412427893639, 46., 38.8912427893639));
#18310 = CARTESIAN_POINT ('', (16.1412427893639, 49., 38.8912427893639));
#18320 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#18300, #18310), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#18330 = EDGE_CURVE ('', #18290, #7700, #18320, .T.);
#18340 = ORIENTED_EDGE ('', *, *, #18330, .F.);
#18350 = CARTESIAN_POINT ('', (46.5324855787281, 46., 8.49999999999999));
#18360 = CARTESIAN_POINT ('', (16.1412427893639, 46., 38.8912427893639));
#18370 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#18350, #18360), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#18380 = EDGE_CURVE ('', #14190, #18290, #18370, .T.);
#18390 = ORIENTED_EDGE ('', *, *, #18380, .F.);
#18400 = ORIENTED_EDGE ('', *, *, #14230, .F.);
#18410 = EDGE_LOOP ('', (#18270, #18340, #18390, #18400));
#18420 = FACE_OUTER_BOUND ('', #18410, .T.);
#18430 = CARTESIAN_POINT ('', (46.5334855787281, 49.001, 8.49899999999999));
#18440 = CARTESIAN_POINT ('', (46.5334855787281, 45.999, 8.49899999999999));
#18450 = CARTESIAN_POINT ('', (16.1402427893639, 49.001, 38.8922427893639));
#18460 = CARTESIAN_POINT ('', (16.1402427893639, 45.999, 38.8922427893639));
#18470 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#18430, #18440), (#18450, #18460)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.00141421356237004, 42.9811219436545), (-3.001, 0.000999999999997669), .UNSPECIFIED.);
#18480 = ADVANCED_FACE ('', (#18420), #18470, .T.);
#18490 = CARTESIAN_POINT ('', (14.75, 46., 42.25));
#18500 = VERTEX_POINT ('', #18490);
#18510 = CARTESIAN_POINT ('', (14.75, 49., 42.25));
#18520 = CARTESIAN_POINT ('', (14.75, 46., 42.25));
#18530 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#18510, #18520), .UNSPECIFIED., .F., .U., (2, 2), (0.0836109260493011, 0.916389073950701), .UNSPECIFIED.);
#18540 = EDGE_CURVE ('', #7580, #18500, #18530, .T.);
#18550 = ORIENTED_EDGE ('', *, *, #18540, .T.);
#18560 = CARTESIAN_POINT ('', (16.1412427893639, 46., 38.8912427893639));
#18570 = CARTESIAN_POINT ('', (14.75, 46., 40.2824855787278));
#18580 = CARTESIAN_POINT ('', (14.75, 46., 42.25));
#18590 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#18560, #18570, #18580), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (135., 179.708039243333), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.888375360194489, 0.924617943409652))
   REPRESENTATION_ITEM ('')
);
#18600 = EDGE_CURVE ('', #18290, #18500, #18590, .T.);
#18610 = ORIENTED_EDGE ('', *, *, #18600, .F.);
#18620 = ORIENTED_EDGE ('', *, *, #18330, .T.);
#18630 = ORIENTED_EDGE ('', *, *, #7750, .T.);
#18640 = EDGE_LOOP ('', (#18550, #18610, #18620, #18630));
#18650 = FACE_OUTER_BOUND ('', #18640, .T.);
#18660 = CARTESIAN_POINT ('', (14.75, 45.6988, 42.25));
#18670 = CARTESIAN_POINT ('', (14.75, 49.3012, 42.25));
#18680 = CARTESIAN_POINT ('', (14.75, 45.6988, 37.5));
#18690 = CARTESIAN_POINT ('', (14.75, 49.3012, 37.5));
#18700 = CARTESIAN_POINT ('', (19.5, 45.6988, 37.5));
#18710 = CARTESIAN_POINT ('', (19.5, 49.3012, 37.5));
#18720 = CARTESIAN_POINT ('', (24.25, 45.6988, 37.5));
#18730 = CARTESIAN_POINT ('', (24.25, 49.3012, 37.5));
#18740 = CARTESIAN_POINT ('', (24.25, 45.6988, 42.25));
#18750 = CARTESIAN_POINT ('', (24.25, 49.3012, 42.25));
#18760 = CARTESIAN_POINT ('', (24.25, 45.6988, 47.));
#18770 = CARTESIAN_POINT ('', (24.25, 49.3012, 47.));
#18780 = CARTESIAN_POINT ('', (19.5, 45.6988, 47.));
#18790 = CARTESIAN_POINT ('', (19.5, 49.3012, 47.));
#18800 = CARTESIAN_POINT ('', (14.75, 45.6988, 47.));
#18810 = CARTESIAN_POINT ('', (14.75, 49.3012, 47.));
#18820 = CARTESIAN_POINT ('', (14.75, 45.6988, 42.25));
#18830 = CARTESIAN_POINT ('', (14.75, 49.3012, 42.25));
#18840 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#18660, #18670), (#18680, #18690), (#18700, #18710), (#18720, #18730), (#18740, #18750), (#18760, #18770), (#18780, #18790), (#18800, #18810), (#18820, #18830)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#18850 = ADVANCED_FACE ('', (#18650), #18840, .T.);
#18860 = ORIENTED_EDGE ('', *, *, #11420, .T.);
#18870 = CARTESIAN_POINT ('', (19.5, 46., 47.));
#18880 = VERTEX_POINT ('', #18870);
#18890 = CARTESIAN_POINT ('', (19.5, 46., 47.));
#18900 = CARTESIAN_POINT ('', (29.9015377501079, 46., 47.));
#18910 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#18890, #18900), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#18920 = EDGE_CURVE ('', #18880, #11380, #18910, .T.);
#18930 = ORIENTED_EDGE ('', *, *, #18920, .F.);
#18940 = CARTESIAN_POINT ('', (19.5, 46., 47.));
#18950 = CARTESIAN_POINT ('', (19.5, 49., 47.));
#18960 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#18940, #18950), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#18970 = EDGE_CURVE ('', #18880, #7600, #18960, .T.);
#18980 = ORIENTED_EDGE ('', *, *, #18970, .T.);
#18990 = ORIENTED_EDGE ('', *, *, #9080, .T.);
#19000 = EDGE_LOOP ('', (#18860, #18930, #18980, #18990));
#19010 = FACE_OUTER_BOUND ('', #19000, .T.);
#19020 = CARTESIAN_POINT ('', (29.9025377501079, 49.001, 47.));
#19030 = CARTESIAN_POINT ('', (19.499, 49.001, 47.));
#19040 = CARTESIAN_POINT ('', (29.9025377501079, 45.999, 47.));
#19050 = CARTESIAN_POINT ('', (19.499, 45.999, 47.));
#19060 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#19020, #19030), (#19040, #19050)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.000999999999997669, 3.001), (27.4974622498921, 37.901), .UNSPECIFIED.);
#19070 = ADVANCED_FACE ('', (#19010), #19060, .T.);
#19080 = ORIENTED_EDGE ('', *, *, #1700, .F.);
#19090 = ORIENTED_EDGE ('', *, *, #1270, .F.);
#19100 = ORIENTED_EDGE ('', *, *, #2190, .F.);
#19110 = ORIENTED_EDGE ('', *, *, #14280, .T.);
#19120 = ORIENTED_EDGE ('', *, *, #18380, .T.);
#19130 = ORIENTED_EDGE ('', *, *, #18600, .T.);
#19140 = CARTESIAN_POINT ('', (14.75, 46., 42.25));
#19150 = CARTESIAN_POINT ('', (14.75, 46., 43.1948337450534));
#19160 = CARTESIAN_POINT ('', (15.1115722205714, 46., 44.0677463037342));
#19170 = CARTESIAN_POINT ('', (16.3261514698833, 46., 47.));
#19180 = CARTESIAN_POINT ('', (19.5, 46., 47.));
#19190 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#19140, #19150, #19160, #19170, #19180), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (179.708039243333, 202.5, 270.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.924617943409652, 0.943094252108056, 1., 0.831469612302545, 1.))
   REPRESENTATION_ITEM ('')
);
#19200 = EDGE_CURVE ('', #18500, #18880, #19190, .T.);
#19210 = ORIENTED_EDGE ('', *, *, #19200, .T.);
#19220 = ORIENTED_EDGE ('', *, *, #18920, .T.);
#19230 = ORIENTED_EDGE ('', *, *, #11550, .F.);
#19240 = EDGE_LOOP ('', (#19080, #19090, #19100, #19110, #19120, #19130, #19210, #19220, #19230));
#19250 = FACE_OUTER_BOUND ('', #19240, .T.);
#19260 = CARTESIAN_POINT ('', (23.2087354182671, 46., 40.7515736263364));
#19270 = VERTEX_POINT ('', #19260);
#19280 = CARTESIAN_POINT ('', (23.5, 46., 42.25));
#19290 = VERTEX_POINT ('', #19280);
#19300 = CARTESIAN_POINT ('', (23.2087354182671, 46., 40.7515736263364));
#19310 = CARTESIAN_POINT ('', (22.1980340673697, 46., 38.25));
#19320 = CARTESIAN_POINT ('', (19.5, 46., 38.25));
#19330 = CARTESIAN_POINT ('', (15.5, 46., 38.25));
#19340 = CARTESIAN_POINT ('', (15.5, 46., 42.25));
#19350 = CARTESIAN_POINT ('', (15.5, 46., 46.25));
#19360 = CARTESIAN_POINT ('', (19.5, 46., 46.25));
#19370 = CARTESIAN_POINT ('', (23.5, 46., 46.25));
#19380 = CARTESIAN_POINT ('', (23.5, 46., 42.25));
#19390 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#19300, #19310, #19320, #19330, #19340, #19350, #19360, #19370, #19380), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 2, 2, 3), (22.8970214745892, 90., 180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.888884387934624, 0.781622140308027, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#19400 = EDGE_CURVE ('', #19270, #19290, #19390, .T.);
#19410 = ORIENTED_EDGE ('', *, *, #19400, .F.);
#19420 = CARTESIAN_POINT ('', (23.5, 46., 42.25));
#19430 = CARTESIAN_POINT ('', (23.5, 46., 41.4724787634491));
#19440 = CARTESIAN_POINT ('', (23.2087354182671, 46., 40.7515736263364));
#19450 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#19420, #19430, #19440), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 22.8970214745892), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.92548464087852, 0.888884387934624))
   REPRESENTATION_ITEM ('')
);
#19460 = EDGE_CURVE ('', #19290, #19270, #19450, .T.);
#19470 = ORIENTED_EDGE ('', *, *, #19460, .F.);
#19480 = EDGE_LOOP ('', (#19410, #19470));
#19490 = FACE_BOUND ('', #19480, .T.);
#19500 = CARTESIAN_POINT ('', (49.501, 46., 8.49899999999999));
#19510 = CARTESIAN_POINT ('', (49.501, 46., 47.001));
#19520 = CARTESIAN_POINT ('', (13.8959929712594, 46., 8.49899999999999));
#19530 = CARTESIAN_POINT ('', (13.8959929712594, 46., 47.001));
#19540 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#19500, #19510), (#19520, #19530)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-30.001, 5.60400702874055), (-33.751, 4.751), .UNSPECIFIED.);
#19550 = ADVANCED_FACE ('', (#19250, #19490), #19540, .T.);
#19560 = CARTESIAN_POINT ('', (-16.6, 22.6961524227066, -41.));
#19570 = VERTEX_POINT ('', #19560);
#19580 = CARTESIAN_POINT ('', (0., 22.6961524227066, -41.));
#19590 = CARTESIAN_POINT ('', (-16.6, 22.6961524227066, -41.));
#19600 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#19580, #19590), .UNSPECIFIED., .F., .U., (2, 2), (0.083383528088985, 0.916616471911015), .UNSPECIFIED.);
#19610 = EDGE_CURVE ('', #10000, #19570, #19600, .T.);
#19620 = ORIENTED_EDGE ('', *, *, #19610, .T.);
#19630 = CARTESIAN_POINT ('', (-16.6, 12.3038475772934, -35.));
#19640 = VERTEX_POINT ('', #19630);
#19650 = CARTESIAN_POINT ('', (-16.6, 22.6961524227066, -41.));
#19660 = CARTESIAN_POINT ('', (-16.6, 25.6961524227066, -35.8038475772934));
#19670 = CARTESIAN_POINT ('', (-16.6, 20.5, -32.8038475772934));
#19680 = CARTESIAN_POINT ('', (-16.6, 15.3038475772934, -29.8038475772934));
#19690 = CARTESIAN_POINT ('', (-16.6, 12.3038475772934, -35.));
#19700 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#19650, #19660, #19670, #19680, #19690), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#19710 = EDGE_CURVE ('', #19570, #19640, #19700, .T.);
#19720 = ORIENTED_EDGE ('', *, *, #19710, .T.);
#19730 = CARTESIAN_POINT ('', (-16.6, 12.3038475772934, -35.));
#19740 = CARTESIAN_POINT ('', (-16.6, 9.30384757729335, -40.1961524227066));
#19750 = CARTESIAN_POINT ('', (-16.6, 14.5, -43.1961524227066));
#19760 = CARTESIAN_POINT ('', (-16.6, 19.6961524227066, -46.1961524227066));
#19770 = CARTESIAN_POINT ('', (-16.6, 22.6961524227066, -41.));
#19780 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#19730, #19740, #19750, #19760, #19770), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (1.35703666409111E-13, 90.0000000000002, 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#19790 = EDGE_CURVE ('', #19640, #19570, #19780, .T.);
#19800 = ORIENTED_EDGE ('', *, *, #19790, .T.);
#19810 = ORIENTED_EDGE ('', *, *, #19610, .F.);
#19820 = ORIENTED_EDGE ('', *, *, #10070, .F.);
#19830 = ORIENTED_EDGE ('', *, *, #10170, .F.);
#19840 = EDGE_LOOP ('', (#19620, #19720, #19800, #19810, #19820, #19830));
#19850 = FACE_OUTER_BOUND ('', #19840, .T.);
#19860 = CARTESIAN_POINT ('', (-18.2612, 22.6961524227066, -41.));
#19870 = CARTESIAN_POINT ('', (1.66119999999999, 22.6961524227066, -41.));
#19880 = CARTESIAN_POINT ('', (-18.2612, 25.6961524227065, -35.8038475772934));
#19890 = CARTESIAN_POINT ('', (1.66119999999999, 25.6961524227066, -35.8038475772934));
#19900 = CARTESIAN_POINT ('', (-18.2612, 20.4999999999999, -32.8038475772934));
#19910 = CARTESIAN_POINT ('', (1.66119999999999, 20.4999999999999, -32.8038475772934));
#19920 = CARTESIAN_POINT ('', (-18.2612, 15.3038475772933, -29.8038475772934));
#19930 = CARTESIAN_POINT ('', (1.66119999999999, 15.3038475772933, -29.8038475772934));
#19940 = CARTESIAN_POINT ('', (-18.2612, 12.3038475772933, -35.0000000000001));
#19950 = CARTESIAN_POINT ('', (1.66119999999999, 12.3038475772933, -35.0000000000001));
#19960 = CARTESIAN_POINT ('', (-18.2612, 9.30384757729337, -40.1961524227067));
#19970 = CARTESIAN_POINT ('', (1.66119999999999, 9.30384757729338, -40.1961524227067));
#19980 = CARTESIAN_POINT ('', (-18.2612, 14.5, -43.1961524227067));
#19990 = CARTESIAN_POINT ('', (1.66119999999999, 14.5, -43.1961524227067));
#20000 = CARTESIAN_POINT ('', (-18.2612, 19.6961524227066, -46.1961524227066));
#20010 = CARTESIAN_POINT ('', (1.66119999999999, 19.6961524227066, -46.1961524227066));
#20020 = CARTESIAN_POINT ('', (-18.2612, 22.6961524227066, -41.));
#20030 = CARTESIAN_POINT ('', (1.66119999999999, 22.6961524227066, -41.));
#20040 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#19860, #19870), (#19880, #19890), (#19900, #19910), (#19920, #19930), (#19940, #19950), (#19960, #19970), (#19980, #19990), (#20000, #20010), (#20020, #20030)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#20050 = ADVANCED_FACE ('', (#19850), #20040, .T.);
#20060 = CARTESIAN_POINT ('', (-17.6, 21.8301270189222, -40.5));
#20070 = VERTEX_POINT ('', #20060);
#20080 = CARTESIAN_POINT ('', (-16.6, 22.6961524227066, -41.));
#20090 = CARTESIAN_POINT ('', (-17.6, 21.8301270189222, -40.5));
#20100 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#20080, #20090), .UNSPECIFIED., .F., .U., (2, 2), (0.000998003992017786, 0.999001996007979), .UNSPECIFIED.);
#20110 = EDGE_CURVE ('', #19570, #20070, #20100, .T.);
#20120 = ORIENTED_EDGE ('', *, *, #20110, .T.);
#20130 = CARTESIAN_POINT ('', (-17.6, 13.1698729810778, -35.5));
#20140 = VERTEX_POINT ('', #20130);
#20150 = CARTESIAN_POINT ('', (-17.6, 21.8301270189222, -40.5));
#20160 = CARTESIAN_POINT ('', (-17.6, 24.3301270189222, -36.1698729810778));
#20170 = CARTESIAN_POINT ('', (-17.6, 20., -33.6698729810778));
#20180 = CARTESIAN_POINT ('', (-17.6, 15.6698729810778, -31.1698729810778));
#20190 = CARTESIAN_POINT ('', (-17.6, 13.1698729810778, -35.5));
#20200 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#20150, #20160, #20170, #20180, #20190), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#20210 = EDGE_CURVE ('', #20070, #20140, #20200, .T.);
#20220 = ORIENTED_EDGE ('', *, *, #20210, .T.);
#20230 = CARTESIAN_POINT ('', (-17.6, 13.1698729810778, -35.5));
#20240 = CARTESIAN_POINT ('', (-17.6, 10.6698729810778, -39.8301270189222));
#20250 = CARTESIAN_POINT ('', (-17.6, 15., -42.3301270189222));
#20260 = CARTESIAN_POINT ('', (-17.6, 19.3301270189222, -44.8301270189222));
#20270 = CARTESIAN_POINT ('', (-17.6, 21.8301270189222, -40.5));
#20280 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#20230, #20240, #20250, #20260, #20270), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (3.66399899304597E-13, 90.0000000000004, 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#20290 = EDGE_CURVE ('', #20140, #20070, #20280, .T.);
#20300 = ORIENTED_EDGE ('', *, *, #20290, .T.);
#20310 = ORIENTED_EDGE ('', *, *, #20110, .F.);
#20320 = ORIENTED_EDGE ('', *, *, #19790, .F.);
#20330 = ORIENTED_EDGE ('', *, *, #19710, .F.);
#20340 = EDGE_LOOP ('', (#20120, #20220, #20300, #20310, #20320, #20330));
#20350 = FACE_OUTER_BOUND ('', #20340, .T.);
#20360 = CARTESIAN_POINT ('', (-17.601, 21.8292609935184, -40.4995));
#20370 = CARTESIAN_POINT ('', (-16.599, 22.6970184481104, -41.0005));
#20380 = CARTESIAN_POINT ('', (-17.6010000000001, 24.3287609935184, -36.1702390064816));
#20390 = CARTESIAN_POINT ('', (-16.5990000000001, 25.6975184481104, -35.8034815518896));
#20400 = CARTESIAN_POINT ('', (-17.6010000000001, 19.9995, -33.6707390064816));
#20410 = CARTESIAN_POINT ('', (-16.5990000000001, 20.5005, -32.8029815518896));
#20420 = CARTESIAN_POINT ('', (-17.6010000000001, 15.6702390064816, -31.1712390064816));
#20430 = CARTESIAN_POINT ('', (-16.5990000000001, 15.3034815518896, -29.8024815518896));
#20440 = CARTESIAN_POINT ('', (-17.601, 13.1707390064816, -35.5005));
#20450 = CARTESIAN_POINT ('', (-16.599, 12.3029815518896, -34.9995));
#20460 = CARTESIAN_POINT ('', (-17.601, 10.6712390064816, -39.8297609935184));
#20470 = CARTESIAN_POINT ('', (-16.5989999999999, 9.30248155188962, -40.1965184481104));
#20480 = CARTESIAN_POINT ('', (-17.6009999999999, 15.0005, -42.3292609935184));
#20490 = CARTESIAN_POINT ('', (-16.5989999999999, 14.4995, -43.1970184481104));
#20500 = CARTESIAN_POINT ('', (-17.6009999999999, 19.3297609935184, -44.8287609935184));
#20510 = CARTESIAN_POINT ('', (-16.5989999999999, 19.6965184481104, -46.1975184481104));
#20520 = CARTESIAN_POINT ('', (-17.601, 21.8292609935184, -40.4995));
#20530 = CARTESIAN_POINT ('', (-16.599, 22.6970184481104, -41.0005));
#20540 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#20360, #20370), (#20380, #20390), (#20400, #20410), (#20420, #20430), (#20440, #20450), (#20460, #20470), (#20480, #20490), (#20500, #20510), (#20520, #20530)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#20550 = ADVANCED_FACE ('', (#20350), #20540, .T.);
#20560 = ORIENTED_EDGE ('', *, *, #20290, .F.);
#20570 = ORIENTED_EDGE ('', *, *, #20210, .F.);
#20580 = EDGE_LOOP ('', (#20560, #20570));
#20590 = FACE_OUTER_BOUND ('', #20580, .T.);
#20600 = CARTESIAN_POINT ('', (-17.6, 20.915563509461, -50.7470565537871));
#20610 = CARTESIAN_POINT ('', (-17.6, 30.2470565537871, -34.584436490539));
#20620 = CARTESIAN_POINT ('', (-17.6, 4.7529434462129, -41.415563509461));
#20630 = CARTESIAN_POINT ('', (-17.6, 14.084436490539, -25.2529434462129));
#20640 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#20600, #20610), (#20620, #20630)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-9.33149304432598, 9.33149304432599), (-9.33149304432598, 9.33149304432599), .UNSPECIFIED.);
#20650 = ADVANCED_FACE ('', (#20590), #20640, .T.);
#20660 = CARTESIAN_POINT ('', (-16.6, -12.3038475772934, 35.));
#20670 = VERTEX_POINT ('', #20660);
#20680 = CARTESIAN_POINT ('', (0., -12.3038475772934, 35.));
#20690 = CARTESIAN_POINT ('', (-16.6, -12.3038475772934, 35.));
#20700 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#20680, #20690), .UNSPECIFIED., .F., .U., (2, 2), (0.083383528088985, 0.916616471911015), .UNSPECIFIED.);
#20710 = EDGE_CURVE ('', #5090, #20670, #20700, .T.);
#20720 = ORIENTED_EDGE ('', *, *, #20710, .T.);
#20730 = CARTESIAN_POINT ('', (-16.6, -22.6961524227066, 41.));
#20740 = VERTEX_POINT ('', #20730);
#20750 = CARTESIAN_POINT ('', (-16.6, -12.3038475772934, 35.));
#20760 = CARTESIAN_POINT ('', (-16.6, -9.3038475772934, 40.1961524227066));
#20770 = CARTESIAN_POINT ('', (-16.6, -14.5, 43.1961524227066));
#20780 = CARTESIAN_POINT ('', (-16.6, -19.6961524227066, 46.1961524227066));
#20790 = CARTESIAN_POINT ('', (-16.6, -22.6961524227066, 41.));
#20800 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#20750, #20760, #20770, #20780, #20790), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#20810 = EDGE_CURVE ('', #20670, #20740, #20800, .T.);
#20820 = ORIENTED_EDGE ('', *, *, #20810, .T.);
#20830 = CARTESIAN_POINT ('', (-16.6, -22.6961524227066, 41.));
#20840 = CARTESIAN_POINT ('', (-16.6, -25.6961524227066, 35.8038475772934));
#20850 = CARTESIAN_POINT ('', (-16.6, -20.5, 32.8038475772934));
#20860 = CARTESIAN_POINT ('', (-16.6, -15.3038475772934, 29.8038475772934));
#20870 = CARTESIAN_POINT ('', (-16.6, -12.3038475772934, 35.));
#20880 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#20830, #20840, #20850, #20860, #20870), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (1.35703666409111E-13, 90.0000000000002, 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#20890 = EDGE_CURVE ('', #20740, #20670, #20880, .T.);
#20900 = ORIENTED_EDGE ('', *, *, #20890, .T.);
#20910 = ORIENTED_EDGE ('', *, *, #20710, .F.);
#20920 = ORIENTED_EDGE ('', *, *, #5160, .F.);
#20930 = ORIENTED_EDGE ('', *, *, #5260, .F.);
#20940 = EDGE_LOOP ('', (#20720, #20820, #20900, #20910, #20920, #20930));
#20950 = FACE_OUTER_BOUND ('', #20940, .T.);
#20960 = CARTESIAN_POINT ('', (-18.2612, -12.3038475772934, 35.));
#20970 = CARTESIAN_POINT ('', (1.66119999999999, -12.3038475772934, 35.));
#20980 = CARTESIAN_POINT ('', (-18.2612, -9.30384757729344, 40.1961524227067));
#20990 = CARTESIAN_POINT ('', (1.66119999999999, -9.30384757729344, 40.1961524227067));
#21000 = CARTESIAN_POINT ('', (-18.2612, -14.5000000000001, 43.1961524227066));
#21010 = CARTESIAN_POINT ('', (1.66119999999999, -14.5000000000001, 43.1961524227066));
#21020 = CARTESIAN_POINT ('', (-18.2612, -19.6961524227067, 46.1961524227066));
#21030 = CARTESIAN_POINT ('', (1.66119999999999, -19.6961524227067, 46.1961524227066));
#21040 = CARTESIAN_POINT ('', (-18.2612, -22.6961524227067, 41.));
#21050 = CARTESIAN_POINT ('', (1.66119999999999, -22.6961524227067, 41.));
#21060 = CARTESIAN_POINT ('', (-18.2612, -25.6961524227067, 35.8038475772933));
#21070 = CARTESIAN_POINT ('', (1.66119999999999, -25.6961524227067, 35.8038475772933));
#21080 = CARTESIAN_POINT ('', (-18.2612, -20.5, 32.8038475772933));
#21090 = CARTESIAN_POINT ('', (1.66119999999999, -20.5, 32.8038475772933));
#21100 = CARTESIAN_POINT ('', (-18.2612, -15.3038475772934, 29.8038475772934));
#21110 = CARTESIAN_POINT ('', (1.66119999999999, -15.3038475772934, 29.8038475772934));
#21120 = CARTESIAN_POINT ('', (-18.2612, -12.3038475772934, 35.));
#21130 = CARTESIAN_POINT ('', (1.66119999999999, -12.3038475772934, 35.));
#21140 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#20960, #20970), (#20980, #20990), (#21000, #21010), (#21020, #21030), (#21040, #21050), (#21060, #21070), (#21080, #21090), (#21100, #21110), (#21120, #21130)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#21150 = ADVANCED_FACE ('', (#20950), #21140, .T.);
#21160 = CARTESIAN_POINT ('', (-17.6, -13.1698729810778, 35.5));
#21170 = VERTEX_POINT ('', #21160);
#21180 = CARTESIAN_POINT ('', (-16.6, -12.3038475772934, 35.));
#21190 = CARTESIAN_POINT ('', (-17.6, -13.1698729810778, 35.5));
#21200 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#21180, #21190), .UNSPECIFIED., .F., .U., (2, 2), (0.000998003992015248, 0.999001996007983), .UNSPECIFIED.);
#21210 = EDGE_CURVE ('', #20670, #21170, #21200, .T.);
#21220 = ORIENTED_EDGE ('', *, *, #21210, .T.);
#21230 = CARTESIAN_POINT ('', (-17.6, -21.8301270189222, 40.5));
#21240 = VERTEX_POINT ('', #21230);
#21250 = CARTESIAN_POINT ('', (-17.6, -13.1698729810778, 35.5));
#21260 = CARTESIAN_POINT ('', (-17.6, -10.6698729810778, 39.8301270189222));
#21270 = CARTESIAN_POINT ('', (-17.6, -15., 42.3301270189222));
#21280 = CARTESIAN_POINT ('', (-17.6, -19.3301270189222, 44.8301270189222));
#21290 = CARTESIAN_POINT ('', (-17.6, -21.8301270189222, 40.5));
#21300 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#21250, #21260, #21270, #21280, #21290), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#21310 = EDGE_CURVE ('', #21170, #21240, #21300, .T.);
#21320 = ORIENTED_EDGE ('', *, *, #21310, .T.);
#21330 = CARTESIAN_POINT ('', (-17.6, -21.8301270189222, 40.5));
#21340 = CARTESIAN_POINT ('', (-17.6, -24.3301270189222, 36.1698729810778));
#21350 = CARTESIAN_POINT ('', (-17.6, -20., 33.6698729810778));
#21360 = CARTESIAN_POINT ('', (-17.6, -15.6698729810778, 31.1698729810778));
#21370 = CARTESIAN_POINT ('', (-17.6, -13.1698729810778, 35.5));
#21380 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#21330, #21340, #21350, #21360, #21370), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (3.25688799381864E-13, 90.0000000000003, 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#21390 = EDGE_CURVE ('', #21240, #21170, #21380, .T.);
#21400 = ORIENTED_EDGE ('', *, *, #21390, .T.);
#21410 = ORIENTED_EDGE ('', *, *, #21210, .F.);
#21420 = ORIENTED_EDGE ('', *, *, #20890, .F.);
#21430 = ORIENTED_EDGE ('', *, *, #20810, .F.);
#21440 = EDGE_LOOP ('', (#21220, #21320, #21400, #21410, #21420, #21430));
#21450 = FACE_OUTER_BOUND ('', #21440, .T.);
#21460 = CARTESIAN_POINT ('', (-17.601, -13.1707390064816, 35.5005));
#21470 = CARTESIAN_POINT ('', (-16.599, -12.3029815518896, 34.9995));
#21480 = CARTESIAN_POINT ('', (-17.601, -10.6712390064816, 39.8297609935184));
#21490 = CARTESIAN_POINT ('', (-16.599, -9.30248155188961, 40.1965184481104));
#21500 = CARTESIAN_POINT ('', (-17.601, -15.0005, 42.3292609935184));
#21510 = CARTESIAN_POINT ('', (-16.599, -14.4995, 43.1970184481104));
#21520 = CARTESIAN_POINT ('', (-17.601, -19.3297609935184, 44.8287609935184));
#21530 = CARTESIAN_POINT ('', (-16.599, -19.6965184481104, 46.1975184481104));
#21540 = CARTESIAN_POINT ('', (-17.601, -21.8292609935184, 40.4995));
#21550 = CARTESIAN_POINT ('', (-16.599, -22.6970184481104, 41.0005));
#21560 = CARTESIAN_POINT ('', (-17.601, -24.3287609935184, 36.1702390064816));
#21570 = CARTESIAN_POINT ('', (-16.599, -25.6975184481104, 35.8034815518896));
#21580 = CARTESIAN_POINT ('', (-17.601, -19.9995, 33.6707390064816));
#21590 = CARTESIAN_POINT ('', (-16.599, -20.5005, 32.8029815518896));
#21600 = CARTESIAN_POINT ('', (-17.601, -15.6702390064816, 31.1712390064816));
#21610 = CARTESIAN_POINT ('', (-16.599, -15.3034815518896, 29.8024815518896));
#21620 = CARTESIAN_POINT ('', (-17.601, -13.1707390064816, 35.5005));
#21630 = CARTESIAN_POINT ('', (-16.599, -12.3029815518896, 34.9995));
#21640 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#21460, #21470), (#21480, #21490), (#21500, #21510), (#21520, #21530), (#21540, #21550), (#21560, #21570), (#21580, #21590), (#21600, #21610), (#21620, #21630)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#21650 = ADVANCED_FACE ('', (#21450), #21640, .T.);
#21660 = ORIENTED_EDGE ('', *, *, #21390, .F.);
#21670 = ORIENTED_EDGE ('', *, *, #21310, .F.);
#21680 = EDGE_LOOP ('', (#21660, #21670));
#21690 = FACE_OUTER_BOUND ('', #21680, .T.);
#21700 = CARTESIAN_POINT ('', (-17.6, -14.084436490539, 25.2529434462129));
#21710 = CARTESIAN_POINT ('', (-17.6, -4.75294344621289, 41.415563509461));
#21720 = CARTESIAN_POINT ('', (-17.6, -30.2470565537871, 34.584436490539));
#21730 = CARTESIAN_POINT ('', (-17.6, -20.915563509461, 50.7470565537871));
#21740 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#21700, #21710), (#21720, #21730)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-9.33149304432598, 9.33149304432599), (-9.33149304432599, 9.33149304432598), .UNSPECIFIED.);
#21750 = ADVANCED_FACE ('', (#21690), #21740, .T.);
#21760 = CARTESIAN_POINT ('', (-16.6, 22.6961524227066, 35.));
#21770 = VERTEX_POINT ('', #21760);
#21780 = CARTESIAN_POINT ('', (0., 22.6961524227066, 35.));
#21790 = CARTESIAN_POINT ('', (-16.6, 22.6961524227066, 35.));
#21800 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#21780, #21790), .UNSPECIFIED., .F., .U., (2, 2), (0.083383528088985, 0.916616471911015), .UNSPECIFIED.);
#21810 = EDGE_CURVE ('', #4850, #21770, #21800, .T.);
#21820 = ORIENTED_EDGE ('', *, *, #21810, .T.);
#21830 = CARTESIAN_POINT ('', (-16.6, 12.3038475772934, 41.));
#21840 = VERTEX_POINT ('', #21830);
#21850 = CARTESIAN_POINT ('', (-16.6, 22.6961524227066, 35.));
#21860 = CARTESIAN_POINT ('', (-16.6, 25.6961524227066, 40.1961524227066));
#21870 = CARTESIAN_POINT ('', (-16.6, 20.5, 43.1961524227066));
#21880 = CARTESIAN_POINT ('', (-16.6, 15.3038475772934, 46.1961524227066));
#21890 = CARTESIAN_POINT ('', (-16.6, 12.3038475772934, 41.));
#21900 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#21850, #21860, #21870, #21880, #21890), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#21910 = EDGE_CURVE ('', #21770, #21840, #21900, .T.);
#21920 = ORIENTED_EDGE ('', *, *, #21910, .T.);
#21930 = CARTESIAN_POINT ('', (-16.6, 12.3038475772934, 41.));
#21940 = CARTESIAN_POINT ('', (-16.6, 9.30384757729337, 35.8038475772934));
#21950 = CARTESIAN_POINT ('', (-16.6, 14.5, 32.8038475772934));
#21960 = CARTESIAN_POINT ('', (-16.6, 19.6961524227066, 29.8038475772934));
#21970 = CARTESIAN_POINT ('', (-16.6, 22.6961524227066, 35.));
#21980 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#21930, #21940, #21950, #21960, #21970), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (1.35703666409111E-13, 90.0000000000002, 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#21990 = EDGE_CURVE ('', #21840, #21770, #21980, .T.);
#22000 = ORIENTED_EDGE ('', *, *, #21990, .T.);
#22010 = ORIENTED_EDGE ('', *, *, #21810, .F.);
#22020 = ORIENTED_EDGE ('', *, *, #4920, .F.);
#22030 = ORIENTED_EDGE ('', *, *, #5020, .F.);
#22040 = EDGE_LOOP ('', (#21820, #21920, #22000, #22010, #22020, #22030));
#22050 = FACE_OUTER_BOUND ('', #22040, .T.);
#22060 = CARTESIAN_POINT ('', (-18.2612, 22.6961524227066, 35.));
#22070 = CARTESIAN_POINT ('', (1.66119999999999, 22.6961524227066, 35.));
#22080 = CARTESIAN_POINT ('', (-18.2612, 25.6961524227066, 40.1961524227067));
#22090 = CARTESIAN_POINT ('', (1.66119999999999, 25.6961524227066, 40.1961524227066));
#22100 = CARTESIAN_POINT ('', (-18.2612, 20.4999999999999, 43.1961524227066));
#22110 = CARTESIAN_POINT ('', (1.66119999999999, 20.4999999999999, 43.1961524227066));
#22120 = CARTESIAN_POINT ('', (-18.2612, 15.3038475772933, 46.1961524227066));
#22130 = CARTESIAN_POINT ('', (1.66119999999999, 15.3038475772933, 46.1961524227066));
#22140 = CARTESIAN_POINT ('', (-18.2612, 12.3038475772933, 41.));
#22150 = CARTESIAN_POINT ('', (1.66119999999999, 12.3038475772933, 41.));
#22160 = CARTESIAN_POINT ('', (-18.2612, 9.30384757729332, 35.8038475772933));
#22170 = CARTESIAN_POINT ('', (1.66119999999999, 9.30384757729333, 35.8038475772933));
#22180 = CARTESIAN_POINT ('', (-18.2612, 14.5, 32.8038475772933));
#22190 = CARTESIAN_POINT ('', (1.66119999999999, 14.5, 32.8038475772933));
#22200 = CARTESIAN_POINT ('', (-18.2612, 19.6961524227066, 29.8038475772934));
#22210 = CARTESIAN_POINT ('', (1.66119999999999, 19.6961524227066, 29.8038475772934));
#22220 = CARTESIAN_POINT ('', (-18.2612, 22.6961524227066, 35.));
#22230 = CARTESIAN_POINT ('', (1.66119999999999, 22.6961524227066, 35.));
#22240 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#22060, #22070), (#22080, #22090), (#22100, #22110), (#22120, #22130), (#22140, #22150), (#22160, #22170), (#22180, #22190), (#22200, #22210), (#22220, #22230)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#22250 = ADVANCED_FACE ('', (#22050), #22240, .T.);
#22260 = CARTESIAN_POINT ('', (-17.6, 21.8301270189222, 35.5));
#22270 = VERTEX_POINT ('', #22260);
#22280 = CARTESIAN_POINT ('', (-16.6, 22.6961524227066, 35.));
#22290 = CARTESIAN_POINT ('', (-17.6, 21.8301270189222, 35.5));
#22300 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#22280, #22290), .UNSPECIFIED., .F., .U., (2, 2), (0.00099800399201448, 0.999001996007983), .UNSPECIFIED.);
#22310 = EDGE_CURVE ('', #21770, #22270, #22300, .T.);
#22320 = ORIENTED_EDGE ('', *, *, #22310, .T.);
#22330 = CARTESIAN_POINT ('', (-17.6, 13.1698729810778, 40.5));
#22340 = VERTEX_POINT ('', #22330);
#22350 = CARTESIAN_POINT ('', (-17.6, 21.8301270189222, 35.5));
#22360 = CARTESIAN_POINT ('', (-17.6, 24.3301270189222, 39.8301270189222));
#22370 = CARTESIAN_POINT ('', (-17.6, 20., 42.3301270189222));
#22380 = CARTESIAN_POINT ('', (-17.6, 15.6698729810778, 44.8301270189222));
#22390 = CARTESIAN_POINT ('', (-17.6, 13.1698729810778, 40.5));
#22400 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#22350, #22360, #22370, #22380, #22390), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#22410 = EDGE_CURVE ('', #22270, #22340, #22400, .T.);
#22420 = ORIENTED_EDGE ('', *, *, #22410, .T.);
#22430 = CARTESIAN_POINT ('', (-17.6, 13.1698729810778, 40.5));
#22440 = CARTESIAN_POINT ('', (-17.6, 10.6698729810778, 36.1698729810778));
#22450 = CARTESIAN_POINT ('', (-17.6, 15., 33.6698729810778));
#22460 = CARTESIAN_POINT ('', (-17.6, 19.3301270189222, 31.1698729810778));
#22470 = CARTESIAN_POINT ('', (-17.6, 21.8301270189222, 35.5));
#22480 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#22430, #22440, #22450, #22460, #22470), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (3.25688799381864E-13, 90.0000000000003, 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#22490 = EDGE_CURVE ('', #22340, #22270, #22480, .T.);
#22500 = ORIENTED_EDGE ('', *, *, #22490, .T.);
#22510 = ORIENTED_EDGE ('', *, *, #22310, .F.);
#22520 = ORIENTED_EDGE ('', *, *, #21990, .F.);
#22530 = ORIENTED_EDGE ('', *, *, #21910, .F.);
#22540 = EDGE_LOOP ('', (#22320, #22420, #22500, #22510, #22520, #22530));
#22550 = FACE_OUTER_BOUND ('', #22540, .T.);
#22560 = CARTESIAN_POINT ('', (-17.601, 21.8292609935184, 35.5005));
#22570 = CARTESIAN_POINT ('', (-16.599, 22.6970184481104, 34.9995));
#22580 = CARTESIAN_POINT ('', (-17.601, 24.3287609935184, 39.8297609935184));
#22590 = CARTESIAN_POINT ('', (-16.599, 25.6975184481104, 40.1965184481104));
#22600 = CARTESIAN_POINT ('', (-17.601, 19.9995, 42.3292609935184));
#22610 = CARTESIAN_POINT ('', (-16.599, 20.5005, 43.1970184481104));
#22620 = CARTESIAN_POINT ('', (-17.601, 15.6702390064816, 44.8287609935184));
#22630 = CARTESIAN_POINT ('', (-16.599, 15.3034815518896, 46.1975184481104));
#22640 = CARTESIAN_POINT ('', (-17.601, 13.1707390064816, 40.4995));
#22650 = CARTESIAN_POINT ('', (-16.599, 12.3029815518896, 41.0005));
#22660 = CARTESIAN_POINT ('', (-17.601, 10.6712390064816, 36.1702390064816));
#22670 = CARTESIAN_POINT ('', (-16.599, 9.3024815518896, 35.8034815518896));
#22680 = CARTESIAN_POINT ('', (-17.601, 15.0005, 33.6707390064816));
#22690 = CARTESIAN_POINT ('', (-16.599, 14.4995, 32.8029815518896));
#22700 = CARTESIAN_POINT ('', (-17.601, 19.3297609935184, 31.1712390064816));
#22710 = CARTESIAN_POINT ('', (-16.599, 19.6965184481104, 29.8024815518896));
#22720 = CARTESIAN_POINT ('', (-17.601, 21.8292609935184, 35.5005));
#22730 = CARTESIAN_POINT ('', (-16.599, 22.6970184481104, 34.9995));
#22740 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#22560, #22570), (#22580, #22590), (#22600, #22610), (#22620, #22630), (#22640, #22650), (#22660, #22670), (#22680, #22690), (#22700, #22710), (#22720, #22730)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#22750 = ADVANCED_FACE ('', (#22550), #22740, .T.);
#22760 = ORIENTED_EDGE ('', *, *, #22490, .F.);
#22770 = ORIENTED_EDGE ('', *, *, #22410, .F.);
#22780 = EDGE_LOOP ('', (#22760, #22770));
#22790 = FACE_OUTER_BOUND ('', #22780, .T.);
#22800 = CARTESIAN_POINT ('', (-17.6, 20.915563509461, 25.2529434462129));
#22810 = CARTESIAN_POINT ('', (-17.6, 30.2470565537871, 41.415563509461));
#22820 = CARTESIAN_POINT ('', (-17.6, 4.75294344621289, 34.584436490539));
#22830 = CARTESIAN_POINT ('', (-17.6, 14.084436490539, 50.7470565537871));
#22840 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#22800, #22810), (#22820, #22830)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-9.33149304432598, 9.33149304432599), (-9.33149304432598, 9.331493044326), .UNSPECIFIED.);
#22850 = ADVANCED_FACE ('', (#22790), #22840, .T.);
#22860 = CARTESIAN_POINT ('', (-16.6, -12.3038475772934, -41.));
#22870 = VERTEX_POINT ('', #22860);
#22880 = CARTESIAN_POINT ('', (0., -12.3038475772934, -41.));
#22890 = CARTESIAN_POINT ('', (-16.6, -12.3038475772934, -41.));
#22900 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#22880, #22890), .UNSPECIFIED., .F., .U., (2, 2), (0.083383528088985, 0.916616471911015), .UNSPECIFIED.);
#22910 = EDGE_CURVE ('', #9760, #22870, #22900, .T.);
#22920 = ORIENTED_EDGE ('', *, *, #22910, .T.);
#22930 = CARTESIAN_POINT ('', (-16.6, -22.6961524227066, -35.));
#22940 = VERTEX_POINT ('', #22930);
#22950 = CARTESIAN_POINT ('', (-16.6, -12.3038475772934, -41.));
#22960 = CARTESIAN_POINT ('', (-16.6, -9.3038475772934, -35.8038475772934));
#22970 = CARTESIAN_POINT ('', (-16.6, -14.5, -32.8038475772934));
#22980 = CARTESIAN_POINT ('', (-16.6, -19.6961524227066, -29.8038475772934));
#22990 = CARTESIAN_POINT ('', (-16.6, -22.6961524227066, -35.));
#23000 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#22950, #22960, #22970, #22980, #22990), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#23010 = EDGE_CURVE ('', #22870, #22940, #23000, .T.);
#23020 = ORIENTED_EDGE ('', *, *, #23010, .T.);
#23030 = CARTESIAN_POINT ('', (-16.6, -22.6961524227066, -35.));
#23040 = CARTESIAN_POINT ('', (-16.6, -25.6961524227066, -40.1961524227066));
#23050 = CARTESIAN_POINT ('', (-16.6, -20.5, -43.1961524227066));
#23060 = CARTESIAN_POINT ('', (-16.6, -15.3038475772934, -46.1961524227066));
#23070 = CARTESIAN_POINT ('', (-16.6, -12.3038475772934, -41.));
#23080 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#23030, #23040, #23050, #23060, #23070), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (1.35703666409111E-13, 90.0000000000002, 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#23090 = EDGE_CURVE ('', #22940, #22870, #23080, .T.);
#23100 = ORIENTED_EDGE ('', *, *, #23090, .T.);
#23110 = ORIENTED_EDGE ('', *, *, #22910, .F.);
#23120 = ORIENTED_EDGE ('', *, *, #9830, .F.);
#23130 = ORIENTED_EDGE ('', *, *, #9930, .F.);
#23140 = EDGE_LOOP ('', (#22920, #23020, #23100, #23110, #23120, #23130));
#23150 = FACE_OUTER_BOUND ('', #23140, .T.);
#23160 = CARTESIAN_POINT ('', (-18.2612, -12.3038475772934, -41.));
#23170 = CARTESIAN_POINT ('', (1.66119999999999, -12.3038475772934, -41.));
#23180 = CARTESIAN_POINT ('', (-18.2612, -9.30384757729343, -35.8038475772934));
#23190 = CARTESIAN_POINT ('', (1.66119999999999, -9.30384757729343, -35.8038475772934));
#23200 = CARTESIAN_POINT ('', (-18.2612, -14.5000000000001, -32.8038475772934));
#23210 = CARTESIAN_POINT ('', (1.66119999999999, -14.5000000000001, -32.8038475772934));
#23220 = CARTESIAN_POINT ('', (-18.2612, -19.6961524227067, -29.8038475772934));
#23230 = CARTESIAN_POINT ('', (1.66119999999999, -19.6961524227067, -29.8038475772934));
#23240 = CARTESIAN_POINT ('', (-18.2612, -22.6961524227067, -35.0000000000001));
#23250 = CARTESIAN_POINT ('', (1.66119999999999, -22.6961524227067, -35.0000000000001));
#23260 = CARTESIAN_POINT ('', (-18.2612, -25.6961524227066, -40.1961524227067));
#23270 = CARTESIAN_POINT ('', (1.66119999999999, -25.6961524227066, -40.1961524227067));
#23280 = CARTESIAN_POINT ('', (-18.2612, -20.5, -43.1961524227067));
#23290 = CARTESIAN_POINT ('', (1.66119999999999, -20.5, -43.1961524227067));
#23300 = CARTESIAN_POINT ('', (-18.2612, -15.3038475772934, -46.1961524227066));
#23310 = CARTESIAN_POINT ('', (1.66119999999999, -15.3038475772934, -46.1961524227066));
#23320 = CARTESIAN_POINT ('', (-18.2612, -12.3038475772934, -41.));
#23330 = CARTESIAN_POINT ('', (1.66119999999999, -12.3038475772934, -41.));
#23340 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#23160, #23170), (#23180, #23190), (#23200, #23210), (#23220, #23230), (#23240, #23250), (#23260, #23270), (#23280, #23290), (#23300, #23310), (#23320, #23330)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#23350 = ADVANCED_FACE ('', (#23150), #23340, .T.);
#23360 = CARTESIAN_POINT ('', (-17.6, -13.1698729810778, -40.5));
#23370 = VERTEX_POINT ('', #23360);
#23380 = CARTESIAN_POINT ('', (-16.6, -12.3038475772934, -41.));
#23390 = CARTESIAN_POINT ('', (-17.6, -13.1698729810778, -40.5));
#23400 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#23380, #23390), .UNSPECIFIED., .F., .U., (2, 2), (0.000998003992017403, 0.999001996007979), .UNSPECIFIED.);
#23410 = EDGE_CURVE ('', #22870, #23370, #23400, .T.);
#23420 = ORIENTED_EDGE ('', *, *, #23410, .T.);
#23430 = CARTESIAN_POINT ('', (-17.6, -21.8301270189222, -35.5));
#23440 = VERTEX_POINT ('', #23430);
#23450 = CARTESIAN_POINT ('', (-17.6, -13.1698729810778, -40.5));
#23460 = CARTESIAN_POINT ('', (-17.6, -10.6698729810778, -36.1698729810778));
#23470 = CARTESIAN_POINT ('', (-17.6, -15., -33.6698729810778));
#23480 = CARTESIAN_POINT ('', (-17.6, -19.3301270189222, -31.1698729810778));
#23490 = CARTESIAN_POINT ('', (-17.6, -21.8301270189222, -35.5));
#23500 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#23450, #23460, #23470, #23480, #23490), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (180., 270., 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#23510 = EDGE_CURVE ('', #23370, #23440, #23500, .T.);
#23520 = ORIENTED_EDGE ('', *, *, #23510, .T.);
#23530 = CARTESIAN_POINT ('', (-17.6, -21.8301270189222, -35.5));
#23540 = CARTESIAN_POINT ('', (-17.6, -24.3301270189222, -39.8301270189222));
#23550 = CARTESIAN_POINT ('', (-17.6, -20., -42.3301270189222));
#23560 = CARTESIAN_POINT ('', (-17.6, -15.6698729810778, -44.8301270189222));
#23570 = CARTESIAN_POINT ('', (-17.6, -13.1698729810778, -40.5));
#23580 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#23530, #23540, #23550, #23560, #23570), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (4.0711099922733E-13, 90.0000000000004, 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#23590 = EDGE_CURVE ('', #23440, #23370, #23580, .T.);
#23600 = ORIENTED_EDGE ('', *, *, #23590, .T.);
#23610 = ORIENTED_EDGE ('', *, *, #23410, .F.);
#23620 = ORIENTED_EDGE ('', *, *, #23090, .F.);
#23630 = ORIENTED_EDGE ('', *, *, #23010, .F.);
#23640 = EDGE_LOOP ('', (#23420, #23520, #23600, #23610, #23620, #23630));
#23650 = FACE_OUTER_BOUND ('', #23640, .T.);
#23660 = CARTESIAN_POINT ('', (-17.601, -13.1707390064816, -40.4995));
#23670 = CARTESIAN_POINT ('', (-16.599, -12.3029815518896, -41.0005));
#23680 = CARTESIAN_POINT ('', (-17.6010000000002, -10.6712390064816, -36.1702390064816));
#23690 = CARTESIAN_POINT ('', (-16.5990000000003, -9.30248155188959, -35.8034815518895));
#23700 = CARTESIAN_POINT ('', (-17.6010000000002, -15.0005, -33.6707390064816));
#23710 = CARTESIAN_POINT ('', (-16.5990000000003, -14.4995, -32.8029815518896));
#23720 = CARTESIAN_POINT ('', (-17.6010000000002, -19.3297609935184, -31.1712390064816));
#23730 = CARTESIAN_POINT ('', (-16.5990000000003, -19.6965184481104, -29.8024815518896));
#23740 = CARTESIAN_POINT ('', (-17.601, -21.8292609935184, -35.5005));
#23750 = CARTESIAN_POINT ('', (-16.599, -22.6970184481104, -34.9995));
#23760 = CARTESIAN_POINT ('', (-17.6009999999998, -24.3287609935184, -39.8297609935184));
#23770 = CARTESIAN_POINT ('', (-16.5989999999997, -25.6975184481104, -40.1965184481104));
#23780 = CARTESIAN_POINT ('', (-17.6009999999998, -19.9995, -42.3292609935184));
#23790 = CARTESIAN_POINT ('', (-16.5989999999997, -20.5005, -43.1970184481104));
#23800 = CARTESIAN_POINT ('', (-17.6009999999998, -15.6702390064816, -44.8287609935184));
#23810 = CARTESIAN_POINT ('', (-16.5989999999997, -15.3034815518896, -46.1975184481104));
#23820 = CARTESIAN_POINT ('', (-17.601, -13.1707390064816, -40.4995));
#23830 = CARTESIAN_POINT ('', (-16.599, -12.3029815518896, -41.0005));
#23840 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#23660, #23670), (#23680, #23690), (#23700, #23710), (#23720, #23730), (#23740, #23750), (#23760, #23770), (#23780, #23790), (#23800, #23810), (#23820, #23830)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#23850 = ADVANCED_FACE ('', (#23650), #23840, .T.);
#23860 = ORIENTED_EDGE ('', *, *, #23590, .F.);
#23870 = ORIENTED_EDGE ('', *, *, #23510, .F.);
#23880 = EDGE_LOOP ('', (#23860, #23870));
#23890 = FACE_OUTER_BOUND ('', #23880, .T.);
#23900 = CARTESIAN_POINT ('', (-17.6, -14.084436490539, -50.7470565537871));
#23910 = CARTESIAN_POINT ('', (-17.6, -4.75294344621292, -34.584436490539));
#23920 = CARTESIAN_POINT ('', (-17.6, -30.2470565537871, -41.415563509461));
#23930 = CARTESIAN_POINT ('', (-17.6, -20.915563509461, -25.2529434462129));
#23940 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#23900, #23910), (#23920, #23930)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-9.33149304432598, 9.33149304432599), (-9.33149304432597, 9.33149304432598), .UNSPECIFIED.);
#23950 = ADVANCED_FACE ('', (#23890), #23940, .T.);
#23960 = CARTESIAN_POINT ('', (23.2087354182672, 46.7, 40.7515736263363));
#23970 = VERTEX_POINT ('', #23960);
#23980 = CARTESIAN_POINT ('', (23.2087354182671, 46., 40.7515736263364));
#23990 = CARTESIAN_POINT ('', (23.2087354182671, 46.7, 40.7515736263364));
#24000 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#23980, #23990), .UNSPECIFIED., .F., .U., (2, 2), (0.0834313494863952, 0.152042656629814), .UNSPECIFIED.);
#24010 = EDGE_CURVE ('', #19270, #23970, #24000, .T.);
#24020 = ORIENTED_EDGE ('', *, *, #24010, .T.);
#24030 = CARTESIAN_POINT ('', (20.9984263736636, 46.7, 45.9587354182672));
#24040 = VERTEX_POINT ('', #24030);
#24050 = CARTESIAN_POINT ('', (23.2087354182672, 46.7, 40.7515736263363));
#24060 = CARTESIAN_POINT ('', (24.7071617919308, 46.7, 44.4603090446035));
#24070 = CARTESIAN_POINT ('', (20.9984263736636, 46.7, 45.9587354182672));
#24080 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#24050, #24060, #24070), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (180., 270.000000000001), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186542, 1.))
   REPRESENTATION_ITEM ('')
);
#24090 = EDGE_CURVE ('', #23970, #24040, #24080, .T.);
#24100 = ORIENTED_EDGE ('', *, *, #24090, .T.);
#24110 = CARTESIAN_POINT ('', (20.9984263736636, 54.5, 45.9587354182672));
#24120 = VERTEX_POINT ('', #24110);
#24130 = CARTESIAN_POINT ('', (20.9984263736636, 46.7, 45.9587354182672));
#24140 = CARTESIAN_POINT ('', (20.9984263736636, 54.5, 45.9587354182672));
#24150 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#24130, #24140), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#24160 = EDGE_CURVE ('', #24040, #24120, #24150, .T.);
#24170 = ORIENTED_EDGE ('', *, *, #24160, .T.);
#24180 = CARTESIAN_POINT ('', (18.0015736263363, 54.5, 38.5412645817329));
#24190 = VERTEX_POINT ('', #24180);
#24200 = CARTESIAN_POINT ('', (18.0015736263363, 54.5, 38.5412645817329));
#24210 = CARTESIAN_POINT ('', (14.2928382080692, 54.5, 40.0396909553965));
#24220 = CARTESIAN_POINT ('', (15.7912645817329, 54.5, 43.7484263736636));
#24230 = CARTESIAN_POINT ('', (17.2896909553965, 54.5, 47.4571617919307));
#24240 = CARTESIAN_POINT ('', (20.9984263736636, 54.5, 45.9587354182671));
#24250 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#24200, #24210, #24220, #24230, #24240), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (90.0000000000009, 180., 269.999999999999), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186553, 1., 0.707106781186553, 1.))
   REPRESENTATION_ITEM ('')
);
#24260 = EDGE_CURVE ('', #24190, #24120, #24250, .T.);
#24270 = ORIENTED_EDGE ('', *, *, #24260, .F.);
#24280 = CARTESIAN_POINT ('', (18.0015736263363, 46.7, 38.5412645817329));
#24290 = VERTEX_POINT ('', #24280);
#24300 = CARTESIAN_POINT ('', (18.0015736263363, 46.7, 38.5412645817329));
#24310 = CARTESIAN_POINT ('', (18.0015736263363, 54.5, 38.5412645817329));
#24320 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#24300, #24310), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#24330 = EDGE_CURVE ('', #24290, #24190, #24320, .T.);
#24340 = ORIENTED_EDGE ('', *, *, #24330, .F.);
#24350 = CARTESIAN_POINT ('', (18.0015736263363, 46.7, 38.5412645817329));
#24360 = CARTESIAN_POINT ('', (21.7103090446035, 46.7, 37.0428382080691));
#24370 = CARTESIAN_POINT ('', (23.2087354182672, 46.7, 40.7515736263363));
#24380 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#24350, #24360, #24370), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (89.9999999999991, 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186542, 1.))
   REPRESENTATION_ITEM ('')
);
#24390 = EDGE_CURVE ('', #24290, #23970, #24380, .T.);
#24400 = ORIENTED_EDGE ('', *, *, #24390, .T.);
#24410 = ORIENTED_EDGE ('', *, *, #24010, .F.);
#24420 = ORIENTED_EDGE ('', *, *, #19400, .T.);
#24430 = ORIENTED_EDGE ('', *, *, #19460, .T.);
#24440 = EDGE_LOOP ('', (#24020, #24100, #24170, #24270, #24340, #24400, #24410, #24420, #24430));
#24450 = FACE_OUTER_BOUND ('', #24440, .T.);
#24460 = CARTESIAN_POINT ('', (23.2087354182671, 55.3512, 40.7515736263363));
#24470 = CARTESIAN_POINT ('', (23.2087354182671, 45.1488, 40.7515736263363));
#24480 = CARTESIAN_POINT ('', (24.7071617919308, 55.3512, 44.4603090446034));
#24490 = CARTESIAN_POINT ('', (24.7071617919308, 45.1488, 44.4603090446035));
#24500 = CARTESIAN_POINT ('', (20.9984263736636, 55.3512, 45.9587354182671));
#24510 = CARTESIAN_POINT ('', (20.9984263736636, 45.1488, 45.9587354182671));
#24520 = CARTESIAN_POINT ('', (17.2896909553965, 55.3512, 47.4571617919307));
#24530 = CARTESIAN_POINT ('', (17.2896909553965, 45.1488, 47.4571617919307));
#24540 = CARTESIAN_POINT ('', (15.7912645817328, 55.3512, 43.7484263736636));
#24550 = CARTESIAN_POINT ('', (15.7912645817329, 45.1488, 43.7484263736636));
#24560 = CARTESIAN_POINT ('', (14.2928382080692, 55.3512, 40.0396909553964));
#24570 = CARTESIAN_POINT ('', (14.2928382080692, 45.1488, 40.0396909553965));
#24580 = CARTESIAN_POINT ('', (18.0015736263363, 55.3512, 38.5412645817328));
#24590 = CARTESIAN_POINT ('', (18.0015736263364, 45.1488, 38.5412645817328));
#24600 = CARTESIAN_POINT ('', (21.7103090446035, 55.3512, 37.0428382080692));
#24610 = CARTESIAN_POINT ('', (21.7103090446035, 45.1488, 37.0428382080692));
#24620 = CARTESIAN_POINT ('', (23.2087354182671, 55.3512, 40.7515736263363));
#24630 = CARTESIAN_POINT ('', (23.2087354182671, 45.1488, 40.7515736263363));
#24640 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#24460, #24470), (#24480, #24490), (#24500, #24510), (#24520, #24530), (#24540, #24550), (#24560, #24570), (#24580, #24590), (#24600, #24610), (#24620, #24630)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#24650 = ADVANCED_FACE ('', (#24450), #24640, .T.);
#24660 = CARTESIAN_POINT ('', (28.3082466183845, 47., 38.6912373625488));
#24670 = VERTEX_POINT ('', #24660);
#24680 = CARTESIAN_POINT ('', (28.3082466183845, 54.5, 38.6912373625488));
#24690 = VERTEX_POINT ('', #24680);
#24700 = CARTESIAN_POINT ('', (28.3082466183845, 47., 38.6912373625488));
#24710 = CARTESIAN_POINT ('', (28.3082466183845, 54.5, 38.6912373625488));
#24720 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#24700, #24710), .UNSPECIFIED., .F., .U., (2, 2), (0.0834444148227136, 0.916555585177286), .UNSPECIFIED.);
#24730 = EDGE_CURVE ('', #24670, #24690, #24720, .T.);
#24740 = ORIENTED_EDGE ('', *, *, #24730, .T.);
#24750 = CARTESIAN_POINT ('', (28.9878249797899, 54.5, 42.7308088527413));
#24760 = VERTEX_POINT ('', #24750);
#24770 = CARTESIAN_POINT ('', (28.9878249797899, 54.5, 42.7308088527413));
#24780 = CARTESIAN_POINT ('', (29.0939822892071, 54.5, 40.6360013916621));
#24790 = CARTESIAN_POINT ('', (28.3082466183845, 54.5, 38.6912373625488));
#24800 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#24770, #24780, #24790), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (335.098937629633, 360.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.953518103674055, 0.953518103674055))
   REPRESENTATION_ITEM ('')
);
#24810 = EDGE_CURVE ('', #24760, #24690, #24800, .T.);
#24820 = ORIENTED_EDGE ('', *, *, #24810, .F.);
#24830 = CARTESIAN_POINT ('', (28.9878249797899, 47., 42.7308088527413));
#24840 = VERTEX_POINT ('', #24830);
#24850 = CARTESIAN_POINT ('', (28.9878249797899, 47., 42.7308088527413));
#24860 = CARTESIAN_POINT ('', (28.9878249797899, 54.5, 42.7308088527413));
#24870 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#24850, #24860), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#24880 = EDGE_CURVE ('', #24840, #24760, #24870, .T.);
#24890 = ORIENTED_EDGE ('', *, *, #24880, .F.);
#24900 = CARTESIAN_POINT ('', (28.3082466183845, 47., 38.6912373625488));
#24910 = CARTESIAN_POINT ('', (29.0939822892071, 47., 40.6360013916621));
#24920 = CARTESIAN_POINT ('', (28.9878249797899, 47., 42.7308088527413));
#24930 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#24900, #24910, #24920), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (180., 204.901062370367), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.953518103674055, 0.953518103674055, 1.))
   REPRESENTATION_ITEM ('')
);
#24940 = EDGE_CURVE ('', #24670, #24840, #24930, .T.);
#24950 = ORIENTED_EDGE ('', *, *, #24940, .F.);
#24960 = EDGE_LOOP ('', (#24740, #24820, #24890, #24950));
#24970 = FACE_OUTER_BOUND ('', #24960, .T.);
#24980 = CARTESIAN_POINT ('', (28.3082466183845, 55.2512, 38.6912373625488));
#24990 = CARTESIAN_POINT ('', (28.3082466183845, 46.2488, 38.6912373625488));
#25000 = CARTESIAN_POINT ('', (31.8670092558357, 55.2512, 47.4994839809333));
#25010 = CARTESIAN_POINT ('', (31.8670092558357, 46.2488, 47.4994839809333));
#25020 = CARTESIAN_POINT ('', (23.0587626374512, 55.2512, 51.0582466183845));
#25030 = CARTESIAN_POINT ('', (23.0587626374512, 46.2488, 51.0582466183845));
#25040 = CARTESIAN_POINT ('', (14.2505160190667, 55.2512, 54.6170092558357));
#25050 = CARTESIAN_POINT ('', (14.2505160190667, 46.2488, 54.6170092558357));
#25060 = CARTESIAN_POINT ('', (10.6917533816155, 55.2512, 45.8087626374512));
#25070 = CARTESIAN_POINT ('', (10.6917533816155, 46.2488, 45.8087626374512));
#25080 = CARTESIAN_POINT ('', (7.13299074416434, 55.2512, 37.0005160190667));
#25090 = CARTESIAN_POINT ('', (7.13299074416434, 46.2488, 37.0005160190667));
#25100 = CARTESIAN_POINT ('', (15.9412373625488, 55.2512, 33.4417533816155));
#25110 = CARTESIAN_POINT ('', (15.9412373625488, 46.2488, 33.4417533816155));
#25120 = CARTESIAN_POINT ('', (24.7494839809333, 55.2512, 29.8829907441643));
#25130 = CARTESIAN_POINT ('', (24.7494839809333, 46.2488, 29.8829907441643));
#25140 = CARTESIAN_POINT ('', (28.3082466183845, 55.2512, 38.6912373625488));
#25150 = CARTESIAN_POINT ('', (28.3082466183845, 46.2488, 38.6912373625488));
#25160 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#24980, #24990), (#25000, #25010), (#25020, #25030), (#25040, #25050), (#25060, #25070), (#25080, #25090), (#25100, #25110), (#25120, #25130), (#25140, #25150)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#25170 = ADVANCED_FACE ('', (#24970), #25160, .T.);
#25180 = CARTESIAN_POINT ('', (22.4614978180646, 47., 45.3676161844586));
#25190 = VERTEX_POINT ('', #25180);
#25200 = CARTESIAN_POINT ('', (22.4614978180646, 47., 45.3676161844586));
#25210 = CARTESIAN_POINT ('', (28.9878249797899, 47., 42.7308088527413));
#25220 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#25200, #25210), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#25230 = EDGE_CURVE ('', #25190, #24840, #25220, .T.);
#25240 = ORIENTED_EDGE ('', *, *, #25230, .F.);
#25250 = CARTESIAN_POINT ('', (23.4868905746372, 47., 40.6391916483116));
#25260 = VERTEX_POINT ('', #25250);
#25270 = CARTESIAN_POINT ('', (22.4614978180646, 47., 45.3676161844586));
#25280 = CARTESIAN_POINT ('', (24.5830563763581, 47., 43.3522972133155));
#25290 = CARTESIAN_POINT ('', (23.4868905746372, 47., 40.6391916483116));
#25300 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#25270, #25280, #25290), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (111.528904405572, 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.826731683913672, 1.))
   REPRESENTATION_ITEM ('')
);
#25310 = EDGE_CURVE ('', #25190, #25260, #25300, .T.);
#25320 = ORIENTED_EDGE ('', *, *, #25310, .T.);
#25330 = CARTESIAN_POINT ('', (19.4646450707373, 47., 37.9501453479243));
#25340 = VERTEX_POINT ('', #25330);
#25350 = CARTESIAN_POINT ('', (23.4868905746372, 47., 40.6391916483116));
#25360 = CARTESIAN_POINT ('', (22.3907247729163, 47., 37.9260860833077));
#25370 = CARTESIAN_POINT ('', (19.4646450707373, 47., 37.9501453479243));
#25380 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#25350, #25360, #25370), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (180., 248.471095594429), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.826731683913672, 1.))
   REPRESENTATION_ITEM ('')
);
#25390 = EDGE_CURVE ('', #25260, #25340, #25380, .T.);
#25400 = ORIENTED_EDGE ('', *, *, #25390, .T.);
#25410 = CARTESIAN_POINT ('', (25.9909722324626, 47., 35.313338016207));
#25420 = VERTEX_POINT ('', #25410);
#25430 = CARTESIAN_POINT ('', (19.4646450707373, 47., 37.9501453479243));
#25440 = CARTESIAN_POINT ('', (25.9909722324626, 47., 35.313338016207));
#25450 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#25430, #25440), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#25460 = EDGE_CURVE ('', #25340, #25420, #25450, .T.);
#25470 = ORIENTED_EDGE ('', *, *, #25460, .T.);
#25480 = CARTESIAN_POINT ('', (25.9909722324626, 47., 35.313338016207));
#25490 = CARTESIAN_POINT ('', (27.5225109475619, 47., 36.7464733334356));
#25500 = CARTESIAN_POINT ('', (28.3082466183845, 47., 38.6912373625488));
#25510 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#25480, #25490, #25500), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (155.098937629633, 180.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.953518103674055, 0.953518103674055))
   REPRESENTATION_ITEM ('')
);
#25520 = EDGE_CURVE ('', #25420, #24670, #25510, .T.);
#25530 = ORIENTED_EDGE ('', *, *, #25520, .T.);
#25540 = ORIENTED_EDGE ('', *, *, #24940, .T.);
#25550 = EDGE_LOOP ('', (#25240, #25320, #25400, #25470, #25530, #25540));
#25560 = FACE_OUTER_BOUND ('', #25550, .T.);
#25570 = CARTESIAN_POINT ('', (15.9708061681173, 47., 36.7235365354828));
#25580 = CARTESIAN_POINT ('', (20.8316354773414, 47., 48.7545112554441));
#25590 = CARTESIAN_POINT ('', (27.8440294479804, 47., 31.9264429452215));
#25600 = CARTESIAN_POINT ('', (32.7048587572045, 47., 43.9574176651828));
#25610 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#25570, #25580), (#25590, #25600)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-1.20196188847807, 11.6037219264226), (-6.44610697601964, 6.52971724773432), .UNSPECIFIED.);
#25620 = ADVANCED_FACE ('', (#25560), #25610, .T.);
#25630 = CARTESIAN_POINT ('', (25.9909722324626, 54.5, 35.313338016207));
#25640 = VERTEX_POINT ('', #25630);
#25650 = CARTESIAN_POINT ('', (18.0015736263363, 54.5, 38.5412645817329));
#25660 = CARTESIAN_POINT ('', (25.9909722324626, 54.5, 35.313338016207));
#25670 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#25650, #25660), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#25680 = EDGE_CURVE ('', #24190, #25640, #25670, .T.);
#25690 = ORIENTED_EDGE ('', *, *, #25680, .T.);
#25700 = CARTESIAN_POINT ('', (25.9909722324626, 47., 35.313338016207));
#25710 = CARTESIAN_POINT ('', (25.9909722324626, 54.5, 35.313338016207));
#25720 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#25700, #25710), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#25730 = EDGE_CURVE ('', #25420, #25640, #25720, .T.);
#25740 = ORIENTED_EDGE ('', *, *, #25730, .F.);
#25750 = ORIENTED_EDGE ('', *, *, #25460, .F.);
#25760 = CARTESIAN_POINT ('', (19.4646450707373, 47., 37.9501453479243));
#25770 = CARTESIAN_POINT ('', (19.2782319433717, 47., 38.02546114022));
#25780 = CARTESIAN_POINT ('', (19.091750288325, 46.9742589975513, 38.100804619496));
#25790 = CARTESIAN_POINT ('', (18.9083347579972, 46.9383485311608, 38.1749093039739));
#25800 = CARTESIAN_POINT ('', (18.6060814716089, 46.8791711187418, 38.2970275585196));
#25810 = CARTESIAN_POINT ('', (18.3091695338447, 46.7908497718329, 38.4169877681399));
#25820 = CARTESIAN_POINT ('', (18.0128851760702, 46.7033410268532, 38.5366944189855));
#25830 = CARTESIAN_POINT ('', (18.0091146503312, 46.7022273873151, 38.5382178102693));
#25840 = CARTESIAN_POINT ('', (18.0053441429143, 46.7011136756177, 38.5397411941504));
#25850 = CARTESIAN_POINT ('', (18.0015736263363, 46.7, 38.5412645817329));
#25860 = B_SPLINE_CURVE_WITH_KNOTS ('', 3, (#25760, #25770, #25780, #25790, #25800, #25810, #25820, #25830, #25840, #25850), .UNSPECIFIED., .F., .U., (4, 3, 3, 4), (0., 0.374973301709985, 0.992136272443115, 1.), .UNSPECIFIED.);
#25870 = EDGE_CURVE ('', #25340, #24290, #25860, .T.);
#25880 = ORIENTED_EDGE ('', *, *, #25870, .T.);
#25890 = ORIENTED_EDGE ('', *, *, #24330, .T.);
#25900 = EDGE_LOOP ('', (#25690, #25740, #25750, #25880, #25890));
#25910 = FACE_OUTER_BOUND ('', #25900, .T.);
#25920 = CARTESIAN_POINT ('', (25.992179231548, 54.501, 35.3128503569219));
#25930 = CARTESIAN_POINT ('', (18.0003666272509, 54.501, 38.5417522410179));
#25940 = CARTESIAN_POINT ('', (25.992179231548, 46.699, 35.312850356922));
#25950 = CARTESIAN_POINT ('', (18.0003666272509, 46.699, 38.541752241018));
#25960 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#25920, #25930), (#25940, #25950)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.300999999999995, 7.501), (-8.61814576025506, 0.0013017904479824), .UNSPECIFIED.);
#25970 = ADVANCED_FACE ('', (#25910), #25960, .T.);
#25980 = ORIENTED_EDGE ('', *, *, #24260, .T.);
#25990 = CARTESIAN_POINT ('', (20.9984263736636, 54.5, 45.9587354182672));
#26000 = CARTESIAN_POINT ('', (28.9878249797899, 54.5, 42.7308088527413));
#26010 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#25990, #26000), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#26020 = EDGE_CURVE ('', #24120, #24760, #26010, .T.);
#26030 = ORIENTED_EDGE ('', *, *, #26020, .T.);
#26040 = ORIENTED_EDGE ('', *, *, #24810, .T.);
#26050 = CARTESIAN_POINT ('', (28.3082466183845, 54.5, 38.6912373625488));
#26060 = CARTESIAN_POINT ('', (27.5225109475619, 54.5, 36.7464733334356));
#26070 = CARTESIAN_POINT ('', (25.9909722324626, 54.5, 35.313338016207));
#26080 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#26050, #26060, #26070), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (360., 384.901062370367), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((0.953518103674055, 0.953518103674055, 1.))
   REPRESENTATION_ITEM ('')
);
#26090 = EDGE_CURVE ('', #24690, #25640, #26080, .T.);
#26100 = ORIENTED_EDGE ('', *, *, #26090, .T.);
#26110 = ORIENTED_EDGE ('', *, *, #25680, .F.);
#26120 = EDGE_LOOP ('', (#25980, #26030, #26040, #26100, #26110));
#26130 = FACE_OUTER_BOUND ('', #26120, .T.);
#26140 = CARTESIAN_POINT ('', (27.1182692746372, 54.5, 30.1301234814467));
#26150 = CARTESIAN_POINT ('', (33.4306189305477, 54.5, 45.7537371289576));
#26160 = CARTESIAN_POINT ('', (10.073239132106, 54.5, 37.0167626791801));
#26170 = CARTESIAN_POINT ('', (16.3855887880165, 54.5, 52.640376326691));
#26180 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#26140, #26150), (#26160, #26170)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-11.6037219264226, 6.77993527228393), (-8.38349992664877, 8.46711019836341), .UNSPECIFIED.);
#26190 = ADVANCED_FACE ('', (#26130), #26180, .T.);
#26200 = ORIENTED_EDGE ('', *, *, #26020, .F.);
#26210 = ORIENTED_EDGE ('', *, *, #24160, .F.);
#26220 = CARTESIAN_POINT ('', (20.9984263736636, 46.7, 45.9587354182672));
#26230 = CARTESIAN_POINT ('', (21.0021968902416, 46.7011136756177, 45.9572120306847));
#26240 = CARTESIAN_POINT ('', (21.0059673976585, 46.7022273873151, 45.9556886468036));
#26250 = CARTESIAN_POINT ('', (21.0097379233975, 46.7033410268532, 45.9541652555198));
#26260 = CARTESIAN_POINT ('', (21.306022281172, 46.7908497718329, 45.8344586046742));
#26270 = CARTESIAN_POINT ('', (21.6029342189362, 46.8791711187418, 45.7144983950539));
#26280 = CARTESIAN_POINT ('', (21.9051875053246, 46.9383485311608, 45.5923801405082));
#26290 = CARTESIAN_POINT ('', (22.0886030356523, 46.9742589975513, 45.5182754560303));
#26300 = CARTESIAN_POINT ('', (22.275084690699, 47., 45.4429319767543));
#26310 = CARTESIAN_POINT ('', (22.4614978180646, 47., 45.3676161844586));
#26320 = B_SPLINE_CURVE_WITH_KNOTS ('', 3, (#26220, #26230, #26240, #26250, #26260, #26270, #26280, #26290, #26300, #26310), .UNSPECIFIED., .F., .U., (4, 3, 3, 4), (0., 0.00786372755688541, 0.625026698290016, 1.), .UNSPECIFIED.);
#26330 = EDGE_CURVE ('', #24040, #25190, #26320, .T.);
#26340 = ORIENTED_EDGE ('', *, *, #26330, .T.);
#26350 = ORIENTED_EDGE ('', *, *, #25230, .T.);
#26360 = ORIENTED_EDGE ('', *, *, #24880, .T.);
#26370 = EDGE_LOOP ('', (#26200, #26210, #26340, #26350, #26360));
#26380 = FACE_OUTER_BOUND ('', #26370, .T.);
#26390 = CARTESIAN_POINT ('', (28.9890319788753, 46.699, 42.7303211934563));
#26400 = CARTESIAN_POINT ('', (20.9972193745782, 46.699, 45.9592230775523));
#26410 = CARTESIAN_POINT ('', (28.9890319788753, 54.501, 42.7303211934562));
#26420 = CARTESIAN_POINT ('', (20.9972193745782, 54.501, 45.9592230775522));
#26430 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#26390, #26400), (#26410, #26420)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (-0.300999999999995, 7.501), (-8.61814576025506, 0.0013017904479824), .UNSPECIFIED.);
#26440 = ADVANCED_FACE ('', (#26380), #26430, .T.);
#26450 = CARTESIAN_POINT ('', (23.4868905746372, 47., 40.6391916483116));
#26460 = CARTESIAN_POINT ('', (23.2087354182672, 47., 40.7515736263363));
#26470 = CARTESIAN_POINT ('', (23.2087354182671, 46.7, 40.7515736263363));
#26480 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#26450, #26460, #26470), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0.25, 0.5), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.707106781186548, 1.))
   REPRESENTATION_ITEM ('')
);
#26490 = EDGE_CURVE ('', #25260, #23970, #26480, .T.);
#26500 = ORIENTED_EDGE ('', *, *, #26490, .T.);
#26510 = ORIENTED_EDGE ('', *, *, #24390, .F.);
#26520 = ORIENTED_EDGE ('', *, *, #25870, .F.);
#26530 = ORIENTED_EDGE ('', *, *, #25390, .F.);
#26540 = EDGE_LOOP ('', (#26500, #26510, #26520, #26530));
#26550 = FACE_OUTER_BOUND ('', #26540, .T.);
#26560 = CARTESIAN_POINT ('', (23.7650457310072, 46.7, 40.5268096702868));
#26570 = CARTESIAN_POINT ('', (23.7650457310072, 46.4, 40.5268096702868));
#26580 = CARTESIAN_POINT ('', (23.4868905746372, 46.4, 40.6391916483116));
#26590 = CARTESIAN_POINT ('', (23.2087354182672, 46.4, 40.7515736263363));
#26600 = CARTESIAN_POINT ('', (23.2087354182671, 46.7, 40.7515736263363));
#26610 = CARTESIAN_POINT ('', (23.2087354182672, 47., 40.7515736263363));
#26620 = CARTESIAN_POINT ('', (23.4868905746372, 47., 40.6391916483116));
#26630 = CARTESIAN_POINT ('', (23.7650457310072, 47., 40.5268096702868));
#26640 = CARTESIAN_POINT ('', (23.7650457310072, 46.7, 40.5268096702868));
#26650 = CARTESIAN_POINT ('', (22.041855401294, 46.7, 36.2617639392796));
#26660 = CARTESIAN_POINT ('', (22.041855401294, 46.4, 36.2617639392796));
#26670 = CARTESIAN_POINT ('', (21.8760822229488, 46.4, 36.6523010736744));
#26680 = CARTESIAN_POINT ('', (21.7103090446035, 46.4, 37.0428382080691));
#26690 = CARTESIAN_POINT ('', (21.7103090446034, 46.7, 37.0428382080692));
#26700 = CARTESIAN_POINT ('', (21.7103090446035, 47., 37.0428382080691));
#26710 = CARTESIAN_POINT ('', (21.8760822229488, 47., 36.6523010736744));
#26720 = CARTESIAN_POINT ('', (22.041855401294, 47., 36.2617639392796));
#26730 = CARTESIAN_POINT ('', (22.041855401294, 46.7, 36.2617639392796));
#26740 = CARTESIAN_POINT ('', (17.7768096702868, 46.7, 37.9849542689928));
#26750 = CARTESIAN_POINT ('', (17.7768096702868, 46.4, 37.9849542689928));
#26760 = CARTESIAN_POINT ('', (17.8891916483116, 46.4, 38.2631094253628));
#26770 = CARTESIAN_POINT ('', (18.0015736263363, 46.4, 38.5412645817328));
#26780 = CARTESIAN_POINT ('', (18.0015736263363, 46.7, 38.5412645817329));
#26790 = CARTESIAN_POINT ('', (18.0015736263363, 47., 38.5412645817328));
#26800 = CARTESIAN_POINT ('', (17.8891916483116, 47., 38.2631094253628));
#26810 = CARTESIAN_POINT ('', (17.7768096702868, 47., 37.9849542689928));
#26820 = CARTESIAN_POINT ('', (17.7768096702868, 46.7, 37.9849542689928));
#26830 = CARTESIAN_POINT ('', (13.5117639392796, 46.7, 39.708144598706));
#26840 = CARTESIAN_POINT ('', (13.5117639392796, 46.4, 39.708144598706));
#26850 = CARTESIAN_POINT ('', (13.9023010736744, 46.4, 39.8739177770512));
#26860 = CARTESIAN_POINT ('', (14.2928382080691, 46.4, 40.0396909553965));
#26870 = CARTESIAN_POINT ('', (14.2928382080692, 46.7, 40.0396909553966));
#26880 = CARTESIAN_POINT ('', (14.2928382080691, 47., 40.0396909553965));
#26890 = CARTESIAN_POINT ('', (13.9023010736744, 47., 39.8739177770512));
#26900 = CARTESIAN_POINT ('', (13.5117639392796, 47., 39.708144598706));
#26910 = CARTESIAN_POINT ('', (13.5117639392796, 46.7, 39.708144598706));
#26920 = CARTESIAN_POINT ('', (15.2349542689928, 46.7, 43.9731903297132));
#26930 = CARTESIAN_POINT ('', (15.2349542689928, 46.4, 43.9731903297132));
#26940 = CARTESIAN_POINT ('', (15.5131094253628, 46.4, 43.8608083516884));
#26950 = CARTESIAN_POINT ('', (15.7912645817328, 46.4, 43.7484263736637));
#26960 = CARTESIAN_POINT ('', (15.7912645817329, 46.7, 43.7484263736637));
#26970 = CARTESIAN_POINT ('', (15.7912645817328, 47., 43.7484263736637));
#26980 = CARTESIAN_POINT ('', (15.5131094253628, 47., 43.8608083516884));
#26990 = CARTESIAN_POINT ('', (15.2349542689928, 47., 43.9731903297132));
#27000 = CARTESIAN_POINT ('', (15.2349542689928, 46.7, 43.9731903297132));
#27010 = CARTESIAN_POINT ('', (16.958144598706, 46.7, 48.2382360607204));
#27020 = CARTESIAN_POINT ('', (16.958144598706, 46.4, 48.2382360607204));
#27030 = CARTESIAN_POINT ('', (17.1239177770512, 46.4, 47.8476989263256));
#27040 = CARTESIAN_POINT ('', (17.2896909553965, 46.4, 47.4571617919309));
#27050 = CARTESIAN_POINT ('', (17.2896909553966, 46.7, 47.4571617919308));
#27060 = CARTESIAN_POINT ('', (17.2896909553965, 47., 47.4571617919309));
#27070 = CARTESIAN_POINT ('', (17.1239177770512, 47., 47.8476989263256));
#27080 = CARTESIAN_POINT ('', (16.958144598706, 47., 48.2382360607204));
#27090 = CARTESIAN_POINT ('', (16.958144598706, 46.7, 48.2382360607204));
#27100 = CARTESIAN_POINT ('', (21.2231903297132, 46.7, 46.5150457310072));
#27110 = CARTESIAN_POINT ('', (21.2231903297132, 46.4, 46.5150457310072));
#27120 = CARTESIAN_POINT ('', (21.1108083516884, 46.4, 46.2368905746372));
#27130 = CARTESIAN_POINT ('', (20.9984263736637, 46.4, 45.9587354182672));
#27140 = CARTESIAN_POINT ('', (20.9984263736637, 46.7, 45.9587354182671));
#27150 = CARTESIAN_POINT ('', (20.9984263736637, 47., 45.9587354182672));
#27160 = CARTESIAN_POINT ('', (21.1108083516884, 47., 46.2368905746372));
#27170 = CARTESIAN_POINT ('', (21.2231903297132, 47., 46.5150457310072));
#27180 = CARTESIAN_POINT ('', (21.2231903297132, 46.7, 46.5150457310072));
#27190 = CARTESIAN_POINT ('', (25.4882360607204, 46.7, 44.791855401294));
#27200 = CARTESIAN_POINT ('', (25.4882360607204, 46.4, 44.791855401294));
#27210 = CARTESIAN_POINT ('', (25.0976989263256, 46.4, 44.6260822229488));
#27220 = CARTESIAN_POINT ('', (24.7071617919309, 46.4, 44.4603090446035));
#27230 = CARTESIAN_POINT ('', (24.7071617919308, 46.7, 44.4603090446034));
#27240 = CARTESIAN_POINT ('', (24.7071617919309, 47., 44.4603090446035));
#27250 = CARTESIAN_POINT ('', (25.0976989263256, 47., 44.6260822229488));
#27260 = CARTESIAN_POINT ('', (25.4882360607204, 47., 44.791855401294));
#27270 = CARTESIAN_POINT ('', (25.4882360607204, 46.7, 44.791855401294));
#27280 = CARTESIAN_POINT ('', (23.7650457310072, 46.7, 40.5268096702868));
#27290 = CARTESIAN_POINT ('', (23.7650457310072, 46.4, 40.5268096702868));
#27300 = CARTESIAN_POINT ('', (23.4868905746372, 46.4, 40.6391916483116));
#27310 = CARTESIAN_POINT ('', (23.2087354182672, 46.4, 40.7515736263363));
#27320 = CARTESIAN_POINT ('', (23.2087354182671, 46.7, 40.7515736263363));
#27330 = CARTESIAN_POINT ('', (23.2087354182672, 47., 40.7515736263363));
#27340 = CARTESIAN_POINT ('', (23.4868905746372, 47., 40.6391916483116));
#27350 = CARTESIAN_POINT ('', (23.7650457310072, 47., 40.5268096702868));
#27360 = CARTESIAN_POINT ('', (23.7650457310072, 46.7, 40.5268096702868));
#27370 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 2, ((#26560, #26570, #26580, #26590, #26600, #26610, #26620, #26630, #26640), (#26650, #26660, #26670, #26680, #26690, #26700, #26710, #26720, #26730), (#26740, #26750, #26760, #26770, #26780, #26790, #26800, #26810, #26820), (#26830, #26840, #26850, #26860, #26870, #26880, #26890, #26900, #26910), (#26920, #26930, #26940, #26950, #26960, #26970, #26980, #26990, #27000), (#27010, #27020, #27030, #27040, #27050, #27060, #27070, #27080, #27090), (#27100, #27110, #27120, #27130, #27140, #27150, #27160, #27170, #27180), (#27190, #27200, #27210, #27220, #27230, #27240, #27250, #27260, #27270), (#27280, #27290, #27300, #27310, #27320, #27330, #27340, #27350, #27360)), .UNSPECIFIED., .T., .T., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (3, 2, 2, 2, 3), (0., 0.25, 0.5, 0.75, 1.), (0., 0.25, 0.5, 0.75, 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.), (0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548), (1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.), (0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548), (1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.), (0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548), (1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.), (0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548), (1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.)))
   REPRESENTATION_ITEM ('')
);
#27380 = ADVANCED_FACE ('', (#26550), #27370, .T.);
#27390 = ORIENTED_EDGE ('', *, *, #15000, .F.);
#27400 = ORIENTED_EDGE ('', *, *, #8010, .F.);
#27410 = ORIENTED_EDGE ('', *, *, #14410, .F.);
#27420 = ORIENTED_EDGE ('', *, *, #16360, .T.);
#27430 = EDGE_LOOP ('', (#27390, #27400, #27410, #27420));
#27440 = FACE_OUTER_BOUND ('', #27430, .T.);
#27450 = CARTESIAN_POINT ('', (22.25, 40.1988, 5.5));
#27460 = CARTESIAN_POINT ('', (22.25, 49.8012, 5.5));
#27470 = CARTESIAN_POINT ('', (22.25, 40.1988, 0.249999999999999));
#27480 = CARTESIAN_POINT ('', (22.25, 49.8012, 0.25));
#27490 = CARTESIAN_POINT ('', (27.5, 40.1988, 0.250000000000001));
#27500 = CARTESIAN_POINT ('', (27.5, 49.8012, 0.250000000000002));
#27510 = CARTESIAN_POINT ('', (32.75, 40.1988, 0.250000000000002));
#27520 = CARTESIAN_POINT ('', (32.75, 49.8012, 0.250000000000003));
#27530 = CARTESIAN_POINT ('', (32.75, 40.1988, 5.5));
#27540 = CARTESIAN_POINT ('', (32.75, 49.8012, 5.5));
#27550 = CARTESIAN_POINT ('', (32.75, 40.1988, 10.75));
#27560 = CARTESIAN_POINT ('', (32.75, 49.8012, 10.75));
#27570 = CARTESIAN_POINT ('', (27.5, 40.1988, 10.75));
#27580 = CARTESIAN_POINT ('', (27.5, 49.8012, 10.75));
#27590 = CARTESIAN_POINT ('', (22.25, 40.1988, 10.75));
#27600 = CARTESIAN_POINT ('', (22.25, 49.8012, 10.75));
#27610 = CARTESIAN_POINT ('', (22.25, 40.1988, 5.5));
#27620 = CARTESIAN_POINT ('', (22.25, 49.8012, 5.5));
#27630 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#27450, #27460), (#27470, #27480), (#27490, #27500), (#27510, #27520), (#27530, #27540), (#27550, #27560), (#27570, #27580), (#27590, #27600), (#27610, #27620)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#27640 = ADVANCED_FACE ('', (#27440), #27630, .T.);
#27650 = ORIENTED_EDGE ('', *, *, #15370, .F.);
#27660 = ORIENTED_EDGE ('', *, *, #8240, .F.);
#27670 = ORIENTED_EDGE ('', *, *, #14840, .T.);
#27680 = ORIENTED_EDGE ('', *, *, #16240, .F.);
#27690 = ORIENTED_EDGE ('', *, *, #17330, .F.);
#27700 = ORIENTED_EDGE ('', *, *, #16820, .F.);
#27710 = ORIENTED_EDGE ('', *, *, #17760, .T.);
#27720 = ORIENTED_EDGE ('', *, *, #17050, .T.);
#27730 = EDGE_LOOP ('', (#27650, #27660, #27670, #27680, #27690, #27700, #27710, #27720));
#27740 = FACE_OUTER_BOUND ('', #27730, .T.);
#27750 = CARTESIAN_POINT ('', (20.5, 36.8988, -11.495));
#27760 = CARTESIAN_POINT ('', (20.5, 50.1012, -11.495));
#27770 = CARTESIAN_POINT ('', (20.5, 36.8988, -15.495));
#27780 = CARTESIAN_POINT ('', (20.5, 50.1012, -15.495));
#27790 = CARTESIAN_POINT ('', (24.5, 36.8988, -15.495));
#27800 = CARTESIAN_POINT ('', (24.5, 50.1012, -15.495));
#27810 = CARTESIAN_POINT ('', (28.5, 36.8988, -15.495));
#27820 = CARTESIAN_POINT ('', (28.5, 50.1012, -15.495));
#27830 = CARTESIAN_POINT ('', (28.5, 36.8988, -11.495));
#27840 = CARTESIAN_POINT ('', (28.5, 50.1012, -11.495));
#27850 = CARTESIAN_POINT ('', (28.5, 36.8988, -7.49500000000001));
#27860 = CARTESIAN_POINT ('', (28.5, 50.1012, -7.49500000000001));
#27870 = CARTESIAN_POINT ('', (24.5, 36.8988, -7.495));
#27880 = CARTESIAN_POINT ('', (24.5, 50.1012, -7.495));
#27890 = CARTESIAN_POINT ('', (20.5, 36.8988, -7.495));
#27900 = CARTESIAN_POINT ('', (20.5, 50.1012, -7.495));
#27910 = CARTESIAN_POINT ('', (20.5, 36.8988, -11.495));
#27920 = CARTESIAN_POINT ('', (20.5, 50.1012, -11.495));
#27930 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#27750, #27760), (#27770, #27780), (#27790, #27800), (#27810, #27820), (#27830, #27840), (#27850, #27860), (#27870, #27880), (#27890, #27900), (#27910, #27920)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#27940 = ADVANCED_FACE ('', (#27740), #27930, .T.);
#27950 = ORIENTED_EDGE ('', *, *, #18540, .F.);
#27960 = ORIENTED_EDGE ('', *, *, #7670, .T.);
#27970 = ORIENTED_EDGE ('', *, *, #18970, .F.);
#27980 = ORIENTED_EDGE ('', *, *, #19200, .F.);
#27990 = EDGE_LOOP ('', (#27950, #27960, #27970, #27980));
#28000 = FACE_OUTER_BOUND ('', #27990, .T.);
#28010 = CARTESIAN_POINT ('', (14.75, 45.6988, 42.25));
#28020 = CARTESIAN_POINT ('', (14.75, 49.3012, 42.25));
#28030 = CARTESIAN_POINT ('', (14.75, 45.6988, 37.5));
#28040 = CARTESIAN_POINT ('', (14.75, 49.3012, 37.5));
#28050 = CARTESIAN_POINT ('', (19.5, 45.6988, 37.5));
#28060 = CARTESIAN_POINT ('', (19.5, 49.3012, 37.5));
#28070 = CARTESIAN_POINT ('', (24.25, 45.6988, 37.5));
#28080 = CARTESIAN_POINT ('', (24.25, 49.3012, 37.5));
#28090 = CARTESIAN_POINT ('', (24.25, 45.6988, 42.25));
#28100 = CARTESIAN_POINT ('', (24.25, 49.3012, 42.25));
#28110 = CARTESIAN_POINT ('', (24.25, 45.6988, 47.));
#28120 = CARTESIAN_POINT ('', (24.25, 49.3012, 47.));
#28130 = CARTESIAN_POINT ('', (19.5, 45.6988, 47.));
#28140 = CARTESIAN_POINT ('', (19.5, 49.3012, 47.));
#28150 = CARTESIAN_POINT ('', (14.75, 45.6988, 47.));
#28160 = CARTESIAN_POINT ('', (14.75, 49.3012, 47.));
#28170 = CARTESIAN_POINT ('', (14.75, 45.6988, 42.25));
#28180 = CARTESIAN_POINT ('', (14.75, 49.3012, 42.25));
#28190 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#28010, #28020), (#28030, #28040), (#28050, #28060), (#28070, #28080), (#28090, #28100), (#28110, #28120), (#28130, #28140), (#28150, #28160), (#28170, #28180)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#28200 = ADVANCED_FACE ('', (#28000), #28190, .T.);
#28210 = ORIENTED_EDGE ('', *, *, #24730, .F.);
#28220 = ORIENTED_EDGE ('', *, *, #25520, .F.);
#28230 = ORIENTED_EDGE ('', *, *, #25730, .T.);
#28240 = ORIENTED_EDGE ('', *, *, #26090, .F.);
#28250 = EDGE_LOOP ('', (#28210, #28220, #28230, #28240));
#28260 = FACE_OUTER_BOUND ('', #28250, .T.);
#28270 = CARTESIAN_POINT ('', (28.3082466183845, 55.2512, 38.6912373625488));
#28280 = CARTESIAN_POINT ('', (28.3082466183845, 46.2488, 38.6912373625488));
#28290 = CARTESIAN_POINT ('', (31.8670092558357, 55.2512, 47.4994839809333));
#28300 = CARTESIAN_POINT ('', (31.8670092558357, 46.2488, 47.4994839809333));
#28310 = CARTESIAN_POINT ('', (23.0587626374512, 55.2512, 51.0582466183845));
#28320 = CARTESIAN_POINT ('', (23.0587626374512, 46.2488, 51.0582466183845));
#28330 = CARTESIAN_POINT ('', (14.2505160190667, 55.2512, 54.6170092558357));
#28340 = CARTESIAN_POINT ('', (14.2505160190667, 46.2488, 54.6170092558357));
#28350 = CARTESIAN_POINT ('', (10.6917533816155, 55.2512, 45.8087626374512));
#28360 = CARTESIAN_POINT ('', (10.6917533816155, 46.2488, 45.8087626374512));
#28370 = CARTESIAN_POINT ('', (7.13299074416434, 55.2512, 37.0005160190667));
#28380 = CARTESIAN_POINT ('', (7.13299074416434, 46.2488, 37.0005160190667));
#28390 = CARTESIAN_POINT ('', (15.9412373625488, 55.2512, 33.4417533816155));
#28400 = CARTESIAN_POINT ('', (15.9412373625488, 46.2488, 33.4417533816155));
#28410 = CARTESIAN_POINT ('', (24.7494839809333, 55.2512, 29.8829907441643));
#28420 = CARTESIAN_POINT ('', (24.7494839809333, 46.2488, 29.8829907441643));
#28430 = CARTESIAN_POINT ('', (28.3082466183845, 55.2512, 38.6912373625488));
#28440 = CARTESIAN_POINT ('', (28.3082466183845, 46.2488, 38.6912373625488));
#28450 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 1, ((#28270, #28280), (#28290, #28300), (#28310, #28320), (#28330, #28340), (#28350, #28360), (#28370, #28380), (#28390, #28400), (#28410, #28420), (#28430, #28440)), .UNSPECIFIED., .T., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (2, 2), (0., 0.25, 0.5, 0.75, 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.), (0.707106781186548, 0.707106781186548), (1., 1.)))
   REPRESENTATION_ITEM ('')
);
#28460 = ADVANCED_FACE ('', (#28260), #28450, .T.);
#28470 = ORIENTED_EDGE ('', *, *, #26490, .F.);
#28480 = ORIENTED_EDGE ('', *, *, #25310, .F.);
#28490 = ORIENTED_EDGE ('', *, *, #26330, .F.);
#28500 = ORIENTED_EDGE ('', *, *, #24090, .F.);
#28510 = EDGE_LOOP ('', (#28470, #28480, #28490, #28500));
#28520 = FACE_OUTER_BOUND ('', #28510, .T.);
#28530 = CARTESIAN_POINT ('', (23.7650457310072, 46.7, 40.5268096702868));
#28540 = CARTESIAN_POINT ('', (23.7650457310072, 46.4, 40.5268096702868));
#28550 = CARTESIAN_POINT ('', (23.4868905746372, 46.4, 40.6391916483116));
#28560 = CARTESIAN_POINT ('', (23.2087354182672, 46.4, 40.7515736263363));
#28570 = CARTESIAN_POINT ('', (23.2087354182671, 46.7, 40.7515736263363));
#28580 = CARTESIAN_POINT ('', (23.2087354182672, 47., 40.7515736263363));
#28590 = CARTESIAN_POINT ('', (23.4868905746372, 47., 40.6391916483116));
#28600 = CARTESIAN_POINT ('', (23.7650457310072, 47., 40.5268096702868));
#28610 = CARTESIAN_POINT ('', (23.7650457310072, 46.7, 40.5268096702868));
#28620 = CARTESIAN_POINT ('', (22.041855401294, 46.7, 36.2617639392796));
#28630 = CARTESIAN_POINT ('', (22.041855401294, 46.4, 36.2617639392796));
#28640 = CARTESIAN_POINT ('', (21.8760822229488, 46.4, 36.6523010736744));
#28650 = CARTESIAN_POINT ('', (21.7103090446035, 46.4, 37.0428382080691));
#28660 = CARTESIAN_POINT ('', (21.7103090446034, 46.7, 37.0428382080692));
#28670 = CARTESIAN_POINT ('', (21.7103090446035, 47., 37.0428382080691));
#28680 = CARTESIAN_POINT ('', (21.8760822229488, 47., 36.6523010736744));
#28690 = CARTESIAN_POINT ('', (22.041855401294, 47., 36.2617639392796));
#28700 = CARTESIAN_POINT ('', (22.041855401294, 46.7, 36.2617639392796));
#28710 = CARTESIAN_POINT ('', (17.7768096702868, 46.7, 37.9849542689928));
#28720 = CARTESIAN_POINT ('', (17.7768096702868, 46.4, 37.9849542689928));
#28730 = CARTESIAN_POINT ('', (17.8891916483116, 46.4, 38.2631094253628));
#28740 = CARTESIAN_POINT ('', (18.0015736263363, 46.4, 38.5412645817328));
#28750 = CARTESIAN_POINT ('', (18.0015736263363, 46.7, 38.5412645817329));
#28760 = CARTESIAN_POINT ('', (18.0015736263363, 47., 38.5412645817328));
#28770 = CARTESIAN_POINT ('', (17.8891916483116, 47., 38.2631094253628));
#28780 = CARTESIAN_POINT ('', (17.7768096702868, 47., 37.9849542689928));
#28790 = CARTESIAN_POINT ('', (17.7768096702868, 46.7, 37.9849542689928));
#28800 = CARTESIAN_POINT ('', (13.5117639392796, 46.7, 39.708144598706));
#28810 = CARTESIAN_POINT ('', (13.5117639392796, 46.4, 39.708144598706));
#28820 = CARTESIAN_POINT ('', (13.9023010736744, 46.4, 39.8739177770512));
#28830 = CARTESIAN_POINT ('', (14.2928382080691, 46.4, 40.0396909553965));
#28840 = CARTESIAN_POINT ('', (14.2928382080692, 46.7, 40.0396909553966));
#28850 = CARTESIAN_POINT ('', (14.2928382080691, 47., 40.0396909553965));
#28860 = CARTESIAN_POINT ('', (13.9023010736744, 47., 39.8739177770512));
#28870 = CARTESIAN_POINT ('', (13.5117639392796, 47., 39.708144598706));
#28880 = CARTESIAN_POINT ('', (13.5117639392796, 46.7, 39.708144598706));
#28890 = CARTESIAN_POINT ('', (15.2349542689928, 46.7, 43.9731903297132));
#28900 = CARTESIAN_POINT ('', (15.2349542689928, 46.4, 43.9731903297132));
#28910 = CARTESIAN_POINT ('', (15.5131094253628, 46.4, 43.8608083516884));
#28920 = CARTESIAN_POINT ('', (15.7912645817328, 46.4, 43.7484263736637));
#28930 = CARTESIAN_POINT ('', (15.7912645817329, 46.7, 43.7484263736637));
#28940 = CARTESIAN_POINT ('', (15.7912645817328, 47., 43.7484263736637));
#28950 = CARTESIAN_POINT ('', (15.5131094253628, 47., 43.8608083516884));
#28960 = CARTESIAN_POINT ('', (15.2349542689928, 47., 43.9731903297132));
#28970 = CARTESIAN_POINT ('', (15.2349542689928, 46.7, 43.9731903297132));
#28980 = CARTESIAN_POINT ('', (16.958144598706, 46.7, 48.2382360607204));
#28990 = CARTESIAN_POINT ('', (16.958144598706, 46.4, 48.2382360607204));
#29000 = CARTESIAN_POINT ('', (17.1239177770512, 46.4, 47.8476989263256));
#29010 = CARTESIAN_POINT ('', (17.2896909553965, 46.4, 47.4571617919309));
#29020 = CARTESIAN_POINT ('', (17.2896909553966, 46.7, 47.4571617919308));
#29030 = CARTESIAN_POINT ('', (17.2896909553965, 47., 47.4571617919309));
#29040 = CARTESIAN_POINT ('', (17.1239177770512, 47., 47.8476989263256));
#29050 = CARTESIAN_POINT ('', (16.958144598706, 47., 48.2382360607204));
#29060 = CARTESIAN_POINT ('', (16.958144598706, 46.7, 48.2382360607204));
#29070 = CARTESIAN_POINT ('', (21.2231903297132, 46.7, 46.5150457310072));
#29080 = CARTESIAN_POINT ('', (21.2231903297132, 46.4, 46.5150457310072));
#29090 = CARTESIAN_POINT ('', (21.1108083516884, 46.4, 46.2368905746372));
#29100 = CARTESIAN_POINT ('', (20.9984263736637, 46.4, 45.9587354182672));
#29110 = CARTESIAN_POINT ('', (20.9984263736637, 46.7, 45.9587354182671));
#29120 = CARTESIAN_POINT ('', (20.9984263736637, 47., 45.9587354182672));
#29130 = CARTESIAN_POINT ('', (21.1108083516884, 47., 46.2368905746372));
#29140 = CARTESIAN_POINT ('', (21.2231903297132, 47., 46.5150457310072));
#29150 = CARTESIAN_POINT ('', (21.2231903297132, 46.7, 46.5150457310072));
#29160 = CARTESIAN_POINT ('', (25.4882360607204, 46.7, 44.791855401294));
#29170 = CARTESIAN_POINT ('', (25.4882360607204, 46.4, 44.791855401294));
#29180 = CARTESIAN_POINT ('', (25.0976989263256, 46.4, 44.6260822229488));
#29190 = CARTESIAN_POINT ('', (24.7071617919309, 46.4, 44.4603090446035));
#29200 = CARTESIAN_POINT ('', (24.7071617919308, 46.7, 44.4603090446034));
#29210 = CARTESIAN_POINT ('', (24.7071617919309, 47., 44.4603090446035));
#29220 = CARTESIAN_POINT ('', (25.0976989263256, 47., 44.6260822229488));
#29230 = CARTESIAN_POINT ('', (25.4882360607204, 47., 44.791855401294));
#29240 = CARTESIAN_POINT ('', (25.4882360607204, 46.7, 44.791855401294));
#29250 = CARTESIAN_POINT ('', (23.7650457310072, 46.7, 40.5268096702868));
#29260 = CARTESIAN_POINT ('', (23.7650457310072, 46.4, 40.5268096702868));
#29270 = CARTESIAN_POINT ('', (23.4868905746372, 46.4, 40.6391916483116));
#29280 = CARTESIAN_POINT ('', (23.2087354182672, 46.4, 40.7515736263363));
#29290 = CARTESIAN_POINT ('', (23.2087354182671, 46.7, 40.7515736263363));
#29300 = CARTESIAN_POINT ('', (23.2087354182672, 47., 40.7515736263363));
#29310 = CARTESIAN_POINT ('', (23.4868905746372, 47., 40.6391916483116));
#29320 = CARTESIAN_POINT ('', (23.7650457310072, 47., 40.5268096702868));
#29330 = CARTESIAN_POINT ('', (23.7650457310072, 46.7, 40.5268096702868));
#29340 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (2, 2, ((#28530, #28540, #28550, #28560, #28570, #28580, #28590, #28600, #28610), (#28620, #28630, #28640, #28650, #28660, #28670, #28680, #28690, #28700), (#28710, #28720, #28730, #28740, #28750, #28760, #28770, #28780, #28790), (#28800, #28810, #28820, #28830, #28840, #28850, #28860, #28870, #28880), (#28890, #28900, #28910, #28920, #28930, #28940, #28950, #28960, #28970), (#28980, #28990, #29000, #29010, #29020, #29030, #29040, #29050, #29060), (#29070, #29080, #29090, #29100, #29110, #29120, #29130, #29140, #29150), (#29160, #29170, #29180, #29190, #29200, #29210, #29220, #29230, #29240), (#29250, #29260, #29270, #29280, #29290, #29300, #29310, #29320, #29330)), .UNSPECIFIED., .T., .T., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((3, 2, 2, 2, 3), (3, 2, 2, 2, 3), (0., 0.25, 0.5, 0.75, 1.), (0., 0.25, 0.5, 0.75, 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.), (0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548), (1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.), (0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548), (1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.), (0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548), (1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.), (0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548, 0.5, 0.707106781186548), (1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1., 0.707106781186548, 1.)))
   REPRESENTATION_ITEM ('')
);
#29350 = ADVANCED_FACE ('', (#28520), #29340, .T.);
#29360 = CLOSED_SHELL ('', (#560, #1120, #1620, #2060, #2340, #3120, #3900, #4100, #4440, #5350, #5780, #6210, #7000, #7560, #9170, #9510, #10260, #10420, #10580, #11360, #11640, #11860, #12120, #12320, #12440, #12560, #12680, #12800, #12920, #13080, #13240, #13360, #13480, #13600, #13730, #13860, #14160, #14500, #14660, #14940, #15310, #16110, #16480, #16680, #16960, #17260, #17440, #17560, #18000, #18260, #18480, #18850, #19070, #19550, #20050, #20550, #20650, #21150, #21650, #21750, #22250, #22750, #22850, #23350, #23850, #23950, #24650, #25170, #25620, #25970, #26190, #26440, #27380, #27640, #27940, #28200, #28460, #29350));
#29370 = MANIFOLD_SOLID_BREP ('NOCUT', #29360);
#29380 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#29390 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#29400 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#29410 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #29380, 'DISTANCE_ACCURACY_VALUE', '');
#29420 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#29410))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#29380, #29390, #29400))
   REPRESENTATION_CONTEXT ('', '3D')
);
#29430 = COLOUR_RGB ('', 0.75294117647059, 0.75294117647059, 0.75294117647059);
#29440 = FILL_AREA_STYLE_COLOUR ('', #29430);
#29450 = FILL_AREA_STYLE ('', (#29440));
#29460 = SURFACE_STYLE_FILL_AREA (#29450);
#29470 = SURFACE_SIDE_STYLE ('', (#29460));
#29480 = SURFACE_STYLE_USAGE (.POSITIVE., #29470);
#29490 = PRESENTATION_STYLE_ASSIGNMENT ((#29480));
#29500 = STYLED_ITEM ('', (#29490), #29370);
#29510 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#29370), #29420);
#29520 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#29530 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #29520);
#29540 = MECHANICAL_CONTEXT ('', #29520, 'mechanical');
#29550 = PRODUCT ('NONE', '', '', (#29540));
#29560 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#29570 = PERSON ('', '', $, $, $, $);
#29580 = ORGANIZATION ($, '', '');
#29590 = PERSON_AND_ORGANIZATION (#29570, #29580);
#29600 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#29590, #29560, (#29550));
#29610 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#29550));
#29620 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #29550, .NOT_KNOWN.);
#29630 = APPROVAL_STATUS ('approved');
#29640 = APPROVAL (#29630, '');
#29650 = CALENDAR_DATE (2018, 14, 6);
#29660 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#29670 = LOCAL_TIME (10, 54, 51., #29660);
#29680 = DATE_AND_TIME (#29650, #29670);
#29690 = APPROVAL_DATE_TIME (#29680, #29640);
#29700 = APPROVAL_ROLE ('');
#29710 = PERSON ('', '', $, $, $, $);
#29720 = ORGANIZATION ($, '', '');
#29730 = PERSON_AND_ORGANIZATION (#29710, #29720);
#29740 = APPROVAL_PERSON_ORGANIZATION (#29730, #29640, #29700);
#29750 = CC_DESIGN_APPROVAL (#29640, (#29620));
#29760 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#29770 = PERSON ('', '', $, $, $, $);
#29780 = ORGANIZATION ($, '', '');
#29790 = PERSON_AND_ORGANIZATION (#29770, #29780);
#29800 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#29790, #29760, (#29620));
#29810 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#29820 = PERSON ('', '', $, $, $, $);
#29830 = ORGANIZATION ($, '', '');
#29840 = PERSON_AND_ORGANIZATION (#29820, #29830);
#29850 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#29840, #29810, (#29620));
#29860 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#29870 = SECURITY_CLASSIFICATION ('', '', #29860);
#29880 = APPROVAL_STATUS ('approved');
#29890 = APPROVAL (#29880, '');
#29900 = CALENDAR_DATE (2018, 14, 6);
#29910 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#29920 = LOCAL_TIME (10, 54, 51., #29910);
#29930 = DATE_AND_TIME (#29900, #29920);
#29940 = APPROVAL_DATE_TIME (#29930, #29890);
#29950 = APPROVAL_ROLE ('');
#29960 = PERSON ('', '', $, $, $, $);
#29970 = ORGANIZATION ($, '', '');
#29980 = PERSON_AND_ORGANIZATION (#29960, #29970);
#29990 = APPROVAL_PERSON_ORGANIZATION (#29980, #29890, #29950);
#30000 = CC_DESIGN_APPROVAL (#29890, (#29870));
#30010 = DATE_TIME_ROLE ('classification_date');
#30020 = CALENDAR_DATE (2018, 14, 6);
#30030 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#30040 = LOCAL_TIME (10, 54, 51., #30030);
#30050 = DATE_AND_TIME (#30020, #30040);
#30060 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#30050, #30010, (#29870));
#30070 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#30080 = PERSON ('', '', $, $, $, $);
#30090 = ORGANIZATION ($, '', '');
#30100 = PERSON_AND_ORGANIZATION (#30080, #30090);
#30110 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#30100, #30070, (#29870));
#30120 = CC_DESIGN_SECURITY_CLASSIFICATION (#29870, (#29620));
#30130 = DESIGN_CONTEXT ('', #29520, 'design');
#30140 = PRODUCT_DEFINITION ('', '', #29620, #30130);
#30150 = APPROVAL_STATUS ('approved');
#30160 = APPROVAL (#30150, '');
#30170 = CALENDAR_DATE (2018, 14, 6);
#30180 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#30190 = LOCAL_TIME (10, 54, 51., #30180);
#30200 = DATE_AND_TIME (#30170, #30190);
#30210 = APPROVAL_DATE_TIME (#30200, #30160);
#30220 = APPROVAL_ROLE ('');
#30230 = PERSON ('', '', $, $, $, $);
#30240 = ORGANIZATION ($, '', '');
#30250 = PERSON_AND_ORGANIZATION (#30230, #30240);
#30260 = APPROVAL_PERSON_ORGANIZATION (#30250, #30160, #30220);
#30270 = CC_DESIGN_APPROVAL (#30160, (#30140));
#30280 = DATE_TIME_ROLE ('creation_date');
#30290 = CALENDAR_DATE (2018, 14, 6);
#30300 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#30310 = LOCAL_TIME (10, 54, 51., #30300);
#30320 = DATE_AND_TIME (#30290, #30310);
#30330 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#30320, #30280, (#30140));
#30340 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#30350 = PERSON ('', '', $, $, $, $);
#30360 = ORGANIZATION ($, '', '');
#30370 = PERSON_AND_ORGANIZATION (#30350, #30360);
#30380 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#30370, #30340, (#30140));
#30390 = PRODUCT_DEFINITION_SHAPE ('', '', #30140);
#30400 = SHAPE_DEFINITION_REPRESENTATION (#30390, #29510);
ENDSEC;
END-ISO-10303-21;