ISO-10303-21;
HEADER;
FILE_DESCRIPTION ((), '1');
FILE_NAME ('C:\\TDMTemp\\Tools\\SMLIB\\inserts\\C\\step\\CCGT 060202FN-ALU AT10.stp', '2010-04-26T07:34:49', ('Unknown'), ('Unknown'), 'HarmonyWare STEP v1.4.3', 'HarmonyWare Translators', '');
FILE_SCHEMA (('CONFIG_CONTROL_DESIGN'));
ENDSEC;

DATA;
#10 = CARTESIAN_POINT ('', (0.348258521929435, 0.292227254948912, -2.38));
#20 = VERTEX_POINT ('', #10);
#30 = CARTESIAN_POINT ('', (6.20274813411381, 0.292227254948913, -2.38));
#40 = VERTEX_POINT ('', #30);
#50 = CARTESIAN_POINT ('', (0.348258521929435, 0.292227254948913, -2.38));
#60 = CARTESIAN_POINT ('', (6.20274813411381, 0.292227254948913, -2.38));
#70 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#50, #60), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#80 = EDGE_CURVE ('', #20, #40, #70, .T.);
#90 = ORIENTED_EDGE ('', *, *, #80, .F.);
#100 = CARTESIAN_POINT ('', (1.36464755494512, 6.05777274505109, -2.38));
#110 = VERTEX_POINT ('', #100);
#120 = CARTESIAN_POINT ('', (1.36464755494512, 6.05777274505109, -2.38));
#130 = CARTESIAN_POINT ('', (0.348258521929435, 0.292227254948912, -2.38));
#140 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#120, #130), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#150 = EDGE_CURVE ('', #110, #20, #140, .T.);
#160 = ORIENTED_EDGE ('', *, *, #150, .F.);
#170 = CARTESIAN_POINT ('', (7.21913716712949, 6.05777274505109, -2.38));
#180 = VERTEX_POINT ('', #170);
#190 = CARTESIAN_POINT ('', (7.21913716712949, 6.05777274505109, -2.38));
#200 = CARTESIAN_POINT ('', (1.36464755494512, 6.05777274505109, -2.38));
#210 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#190, #200), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#220 = EDGE_CURVE ('', #180, #110, #210, .T.);
#230 = ORIENTED_EDGE ('', *, *, #220, .F.);
#240 = CARTESIAN_POINT ('', (6.20274813411381, 0.292227254948913, -2.38));
#250 = CARTESIAN_POINT ('', (7.21913716712949, 6.05777274505109, -2.38));
#260 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#240, #250), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#270 = EDGE_CURVE ('', #40, #180, #260, .T.);
#280 = ORIENTED_EDGE ('', *, *, #270, .F.);
#290 = EDGE_LOOP ('', (#90, #160, #230, #280));
#300 = FACE_OUTER_BOUND ('', #290, .T.);
#310 = CARTESIAN_POINT ('', (7.21913716712949, 0.292227254948912, -2.38));
#320 = CARTESIAN_POINT ('', (7.21913716712949, 6.05777274505109, -2.38));
#330 = CARTESIAN_POINT ('', (0.348258521929434, 0.292227254948912, -2.38));
#340 = CARTESIAN_POINT ('', (0.348258521929434, 6.05777274505109, -2.38));
#350 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#310, #320), (#330, #340)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.15180281529798, 0.84819718470202), (0.20781805186918, 0.79218194813082), .UNSPECIFIED.);
#360 = ADVANCED_FACE ('', (#300), #350, .T.);
#370 = ORIENTED_EDGE ('', *, *, #150, .T.);
#380 = CARTESIAN_POINT ('', (0.0413891679164005, 0.234729635533386, 0.));
#390 = VERTEX_POINT ('', #380);
#400 = CARTESIAN_POINT ('', (0.0413891679164004, 0.234729635533386, 0.));
#410 = CARTESIAN_POINT ('', (0.348258521929435, 0.292227254948912, -2.38));
#420 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#400, #410), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#430 = EDGE_CURVE ('', #390, #20, #420, .T.);
#440 = ORIENTED_EDGE ('', *, *, #430, .F.);
#450 = CARTESIAN_POINT ('', (1.09029507921746, 6.18472963553339, 0.));
#460 = VERTEX_POINT ('', #450);
#470 = CARTESIAN_POINT ('', (1.09029507921746, 6.18472963553339, 0.));
#480 = CARTESIAN_POINT ('', (0.0413891679164005, 0.234729635533386, 0.));
#490 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#470, #480), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#500 = EDGE_CURVE ('', #460, #390, #490, .T.);
#510 = ORIENTED_EDGE ('', *, *, #500, .F.);
#520 = CARTESIAN_POINT ('', (1.09029507921746, 6.18472963553339, 0.));
#530 = CARTESIAN_POINT ('', (1.36464755494512, 6.05777274505109, -2.38));
#540 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#520, #530), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#550 = EDGE_CURVE ('', #460, #110, #540, .T.);
#560 = ORIENTED_EDGE ('', *, *, #550, .T.);
#570 = EDGE_LOOP ('', (#370, #440, #510, #560));
#580 = FACE_OUTER_BOUND ('', #570, .T.);
#590 = CARTESIAN_POINT ('', (1.36464755494512, 6.05777274505109, -2.38));
#600 = CARTESIAN_POINT ('', (1.09029507921746, 6.18472963553339, 0.));
#610 = CARTESIAN_POINT ('', (0.348258521929435, 0.292227254948912, -2.38));
#620 = CARTESIAN_POINT ('', (0.0413891679164005, 0.234729635533386, 0.));
#630 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#590, #600), (#610, #620)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#640 = ADVANCED_FACE ('', (#580), #630, .T.);
#650 = CARTESIAN_POINT ('', (0.238350718518842, -2.77555756156289E-17, 0.));
#660 = VERTEX_POINT ('', #650);
#670 = CARTESIAN_POINT ('', (0.0413891679164004, 0.234729635533386, 0.));
#680 = CARTESIAN_POINT ('', (0.0251944729022505, 0.142884956125384, 0.));
#690 = CARTESIAN_POINT ('', (0.0851418298950464, 0.0714424780626921, 0.));
#700 = CARTESIAN_POINT ('', (0.145089186887842, -1.51060599019475E-17, 0.));
#710 = CARTESIAN_POINT ('', (0.238350718518842, -2.77555756156289E-17, 0.));
#720 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#670, #680, #690, #700, #710), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 0.5, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.90630778703665, 1., 0.90630778703665, 1.))
   REPRESENTATION_ITEM ('')
);
#730 = EDGE_CURVE ('', #390, #660, #720, .T.);
#740 = ORIENTED_EDGE ('', *, *, #730, .F.);
#750 = ORIENTED_EDGE ('', *, *, #430, .T.);
#760 = CARTESIAN_POINT ('', (0.238350718518842, -2.77555756156289E-17, 0.));
#770 = CARTESIAN_POINT ('', (0.348258521929435, 0.292227254948912, -2.38));
#780 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#760, #770), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#790 = EDGE_CURVE ('', #660, #20, #780, .T.);
#800 = ORIENTED_EDGE ('', *, *, #790, .F.);
#810 = EDGE_LOOP ('', (#740, #750, #800));
#820 = FACE_OUTER_BOUND ('', #810, .T.);
#830 = CARTESIAN_POINT ('', (0.0413891679164004, 0.234729635533386, 0.));
#840 = CARTESIAN_POINT ('', (0.0251944729022505, 0.142884956125384, 0.));
#850 = CARTESIAN_POINT ('', (0.0851418298950464, 0.0714424780626921, 0.));
#860 = CARTESIAN_POINT ('', (0.145089186887842, -1.51060599019475E-17, 0.));
#870 = CARTESIAN_POINT ('', (0.238350718518842, -2.77555756156289E-17, 0.));
#880 = CARTESIAN_POINT ('', (0.348258521929435, 0.292227254948912, -2.38));
#890 = CARTESIAN_POINT ('', (0.348258521929435, 0.292227254948912, -2.38));
#900 = CARTESIAN_POINT ('', (0.348258521929435, 0.292227254948912, -2.38));
#910 = CARTESIAN_POINT ('', (0.348258521929435, 0.292227254948912, -2.38));
#920 = CARTESIAN_POINT ('', (0.348258521929435, 0.292227254948912, -2.38));
#930 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#830, #840, #850, #860, #870), (#880, #890, #900, #910, #920)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 2, 3), (0., 1.), (0., 0.5, 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.90630778703665, 1., 0.90630778703665, 1.), (1., 0.90630778703665, 1., 0.90630778703665, 1.)))
   REPRESENTATION_ITEM ('')
);
#940 = ADVANCED_FACE ('', (#820), #930, .T.);
#950 = ORIENTED_EDGE ('', *, *, #80, .T.);
#960 = CARTESIAN_POINT ('', (6.28013905923902, 0., 0.));
#970 = VERTEX_POINT ('', #960);
#980 = CARTESIAN_POINT ('', (6.28013905923902, 0., 0.));
#990 = CARTESIAN_POINT ('', (6.20274813411381, 0.292227254948913, -2.38));
#1000 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#980, #990), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#1010 = EDGE_CURVE ('', #970, #40, #1000, .T.);
#1020 = ORIENTED_EDGE ('', *, *, #1010, .F.);
#1030 = CARTESIAN_POINT ('', (0.238350718518842, 0., 0.));
#1040 = CARTESIAN_POINT ('', (6.28013905923902, 0., 0.));
#1050 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1030, #1040), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1060 = EDGE_CURVE ('', #660, #970, #1050, .T.);
#1070 = ORIENTED_EDGE ('', *, *, #1060, .F.);
#1080 = ORIENTED_EDGE ('', *, *, #790, .T.);
#1090 = EDGE_LOOP ('', (#950, #1020, #1070, #1080));
#1100 = FACE_OUTER_BOUND ('', #1090, .T.);
#1110 = CARTESIAN_POINT ('', (0.348258521929435, 0.292227254948913, -2.38));
#1120 = CARTESIAN_POINT ('', (0.238350718518842, 0., 0.));
#1130 = CARTESIAN_POINT ('', (6.20274813411381, 0.292227254948913, -2.38));
#1140 = CARTESIAN_POINT ('', (6.28013905923902, 0., 0.));
#1150 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1110, #1120), (#1130, #1140)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#1160 = ADVANCED_FACE ('', (#1100), #1150, .T.);
#1170 = CARTESIAN_POINT ('', (6.47710060984147, 0.165270364466614, 0.));
#1180 = VERTEX_POINT ('', #1170);
#1190 = CARTESIAN_POINT ('', (6.28013905923902, 0., 0.));
#1200 = CARTESIAN_POINT ('', (6.44795898547448, -2.41537945826843E-17, 0.));
#1210 = CARTESIAN_POINT ('', (6.47710060984147, 0.165270364466614, 0.));
#1220 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1190, #1200, #1210), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.766044443118978, 1.))
   REPRESENTATION_ITEM ('')
);
#1230 = EDGE_CURVE ('', #970, #1180, #1220, .T.);
#1240 = ORIENTED_EDGE ('', *, *, #1230, .F.);
#1250 = ORIENTED_EDGE ('', *, *, #1010, .T.);
#1260 = CARTESIAN_POINT ('', (6.47710060984147, 0.165270364466614, 0.));
#1270 = CARTESIAN_POINT ('', (6.20274813411381, 0.292227254948913, -2.38));
#1280 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#1260, #1270), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#1290 = EDGE_CURVE ('', #1180, #40, #1280, .T.);
#1300 = ORIENTED_EDGE ('', *, *, #1290, .F.);
#1310 = EDGE_LOOP ('', (#1240, #1250, #1300));
#1320 = FACE_OUTER_BOUND ('', #1310, .T.);
#1330 = CARTESIAN_POINT ('', (6.28013905923902, 0., 0.));
#1340 = CARTESIAN_POINT ('', (6.44795898547448, -2.41537945826843E-17, 0.));
#1350 = CARTESIAN_POINT ('', (6.47710060984147, 0.165270364466614, 0.));
#1360 = CARTESIAN_POINT ('', (6.20274813411381, 0.292227254948913, -2.38));
#1370 = CARTESIAN_POINT ('', (6.20274813411381, 0.292227254948913, -2.38));
#1380 = CARTESIAN_POINT ('', (6.20274813411381, 0.292227254948913, -2.38));
#1390 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#1330, #1340, #1350), (#1360, #1370, #1380)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 3), (0., 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.766044443118978, 1.), (1., 0.766044443118978, 1.)))
   REPRESENTATION_ITEM ('')
);
#1400 = ADVANCED_FACE ('', (#1320), #1390, .T.);
#1410 = ORIENTED_EDGE ('', *, *, #270, .T.);
#1420 = CARTESIAN_POINT ('', (7.52600652114252, 6.11527036446661, 0.));
#1430 = VERTEX_POINT ('', #1420);
#1440 = CARTESIAN_POINT ('', (7.52600652114252, 6.11527036446661, 0.));
#1450 = CARTESIAN_POINT ('', (7.21913716712949, 6.05777274505109, -2.38));
#1460 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#1440, #1450), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#1470 = EDGE_CURVE ('', #1430, #180, #1460, .T.);
#1480 = ORIENTED_EDGE ('', *, *, #1470, .F.);
#1490 = CARTESIAN_POINT ('', (6.47710060984147, 0.165270364466614, 0.));
#1500 = CARTESIAN_POINT ('', (7.52600652114252, 6.11527036446661, 0.));
#1510 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1490, #1500), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1520 = EDGE_CURVE ('', #1180, #1430, #1510, .T.);
#1530 = ORIENTED_EDGE ('', *, *, #1520, .F.);
#1540 = ORIENTED_EDGE ('', *, *, #1290, .T.);
#1550 = EDGE_LOOP ('', (#1410, #1480, #1530, #1540));
#1560 = FACE_OUTER_BOUND ('', #1550, .T.);
#1570 = CARTESIAN_POINT ('', (6.20274813411381, 0.292227254948913, -2.38));
#1580 = CARTESIAN_POINT ('', (6.47710060984147, 0.165270364466614, 0.));
#1590 = CARTESIAN_POINT ('', (7.21913716712949, 6.05777274505109, -2.38));
#1600 = CARTESIAN_POINT ('', (7.52600652114252, 6.11527036446661, 0.));
#1610 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#1570, #1580), (#1590, #1600)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#1620 = ADVANCED_FACE ('', (#1560), #1610, .T.);
#1630 = CARTESIAN_POINT ('', (7.32904497054008, 6.35, 0.));
#1640 = VERTEX_POINT ('', #1630);
#1650 = CARTESIAN_POINT ('', (7.52600652114252, 6.11527036446661, 0.));
#1660 = CARTESIAN_POINT ('', (7.54220121615667, 6.20711504387462, 0.));
#1670 = CARTESIAN_POINT ('', (7.48225385916388, 6.27855752193731, 0.));
#1680 = CARTESIAN_POINT ('', (7.42230650217108, 6.35, 0.));
#1690 = CARTESIAN_POINT ('', (7.32904497054008, 6.35, 0.));
#1700 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#1650, #1660, #1670, #1680, #1690), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 0.5, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.90630778703665, 1., 0.90630778703665, 1.))
   REPRESENTATION_ITEM ('')
);
#1710 = EDGE_CURVE ('', #1430, #1640, #1700, .T.);
#1720 = ORIENTED_EDGE ('', *, *, #1710, .F.);
#1730 = ORIENTED_EDGE ('', *, *, #1470, .T.);
#1740 = CARTESIAN_POINT ('', (7.32904497054008, 6.35, 0.));
#1750 = CARTESIAN_POINT ('', (7.21913716712949, 6.05777274505109, -2.38));
#1760 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#1740, #1750), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#1770 = EDGE_CURVE ('', #1640, #180, #1760, .T.);
#1780 = ORIENTED_EDGE ('', *, *, #1770, .F.);
#1790 = EDGE_LOOP ('', (#1720, #1730, #1780));
#1800 = FACE_OUTER_BOUND ('', #1790, .T.);
#1810 = CARTESIAN_POINT ('', (7.52600652114252, 6.11527036446661, 0.));
#1820 = CARTESIAN_POINT ('', (7.54220121615667, 6.20711504387462, 0.));
#1830 = CARTESIAN_POINT ('', (7.48225385916388, 6.27855752193731, 0.));
#1840 = CARTESIAN_POINT ('', (7.42230650217108, 6.35, 0.));
#1850 = CARTESIAN_POINT ('', (7.32904497054008, 6.35, 0.));
#1860 = CARTESIAN_POINT ('', (7.21913716712949, 6.05777274505109, -2.38));
#1870 = CARTESIAN_POINT ('', (7.21913716712949, 6.05777274505109, -2.38));
#1880 = CARTESIAN_POINT ('', (7.21913716712949, 6.05777274505109, -2.38));
#1890 = CARTESIAN_POINT ('', (7.21913716712949, 6.05777274505109, -2.38));
#1900 = CARTESIAN_POINT ('', (7.21913716712949, 6.05777274505109, -2.38));
#1910 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#1810, #1820, #1830, #1840, #1850), (#1860, #1870, #1880, #1890, #1900)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 2, 3), (0., 1.), (0., 0.5, 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.90630778703665, 1., 0.90630778703665, 1.), (1., 0.90630778703665, 1., 0.90630778703665, 1.)))
   REPRESENTATION_ITEM ('')
);
#1920 = ADVANCED_FACE ('', (#1800), #1910, .T.);
#1930 = ORIENTED_EDGE ('', *, *, #220, .T.);
#1940 = CARTESIAN_POINT ('', (1.2872566298199, 6.35, 0.));
#1950 = VERTEX_POINT ('', #1940);
#1960 = CARTESIAN_POINT ('', (1.36464755494512, 6.05777274505109, -2.38));
#1970 = CARTESIAN_POINT ('', (1.2872566298199, 6.35, 0.));
#1980 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#1960, #1970), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#1990 = EDGE_CURVE ('', #110, #1950, #1980, .T.);
#2000 = ORIENTED_EDGE ('', *, *, #1990, .T.);
#2010 = CARTESIAN_POINT ('', (7.32904497054008, 6.35, 0.));
#2020 = CARTESIAN_POINT ('', (1.2872566298199, 6.35, 0.));
#2030 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#2010, #2020), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#2040 = EDGE_CURVE ('', #1640, #1950, #2030, .T.);
#2050 = ORIENTED_EDGE ('', *, *, #2040, .F.);
#2060 = ORIENTED_EDGE ('', *, *, #1770, .T.);
#2070 = EDGE_LOOP ('', (#1930, #2000, #2050, #2060));
#2080 = FACE_OUTER_BOUND ('', #2070, .T.);
#2090 = CARTESIAN_POINT ('', (7.21913716712949, 6.05777274505109, -2.38));
#2100 = CARTESIAN_POINT ('', (7.32904497054008, 6.35, 0.));
#2110 = CARTESIAN_POINT ('', (1.36464755494512, 6.05777274505109, -2.38));
#2120 = CARTESIAN_POINT ('', (1.2872566298199, 6.35, 0.));
#2130 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2090, #2100), (#2110, #2120)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#2140 = ADVANCED_FACE ('', (#2080), #2130, .T.);
#2150 = CARTESIAN_POINT ('', (1.2872566298199, 6.35, 0.));
#2160 = CARTESIAN_POINT ('', (1.11943670358444, 6.35, 0.));
#2170 = CARTESIAN_POINT ('', (1.09029507921746, 6.18472963553339, 0.));
#2180 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#2150, #2160, #2170), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.766044443118977, 1.))
   REPRESENTATION_ITEM ('')
);
#2190 = EDGE_CURVE ('', #1950, #460, #2180, .T.);
#2200 = ORIENTED_EDGE ('', *, *, #2190, .F.);
#2210 = ORIENTED_EDGE ('', *, *, #1990, .F.);
#2220 = ORIENTED_EDGE ('', *, *, #550, .F.);
#2230 = EDGE_LOOP ('', (#2200, #2210, #2220));
#2240 = FACE_OUTER_BOUND ('', #2230, .T.);
#2250 = CARTESIAN_POINT ('', (1.2872566298199, 6.35, 0.));
#2260 = CARTESIAN_POINT ('', (1.11943670358444, 6.35, 0.));
#2270 = CARTESIAN_POINT ('', (1.09029507921746, 6.18472963553339, 0.));
#2280 = CARTESIAN_POINT ('', (1.36464755494512, 6.05777274505109, -2.38));
#2290 = CARTESIAN_POINT ('', (1.36464755494512, 6.05777274505109, -2.38));
#2300 = CARTESIAN_POINT ('', (1.36464755494512, 6.05777274505109, -2.38));
#2310 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#2250, #2260, #2270), (#2280, #2290, #2300)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 3), (0., 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.766044443118977, 1.), (1., 0.766044443118977, 1.)))
   REPRESENTATION_ITEM ('')
);
#2320 = ADVANCED_FACE ('', (#2240), #2310, .T.);
#2330 = ORIENTED_EDGE ('', *, *, #1060, .T.);
#2340 = ORIENTED_EDGE ('', *, *, #1230, .T.);
#2350 = ORIENTED_EDGE ('', *, *, #1520, .T.);
#2360 = ORIENTED_EDGE ('', *, *, #1710, .T.);
#2370 = ORIENTED_EDGE ('', *, *, #2040, .T.);
#2380 = ORIENTED_EDGE ('', *, *, #2190, .T.);
#2390 = ORIENTED_EDGE ('', *, *, #500, .T.);
#2400 = ORIENTED_EDGE ('', *, *, #730, .T.);
#2410 = EDGE_LOOP ('', (#2330, #2340, #2350, #2360, #2370, #2380, #2390, #2400));
#2420 = FACE_OUTER_BOUND ('', #2410, .T.);
#2430 = CARTESIAN_POINT ('', (7.54220121615667, 0., 0.));
#2440 = CARTESIAN_POINT ('', (0.0251944729022497, 0., 0.));
#2450 = CARTESIAN_POINT ('', (7.54220121615667, 6.35, 0.));
#2460 = CARTESIAN_POINT ('', (0.0251944729022497, 6.35, 0.));
#2470 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#2430, #2440), (#2450, #2460)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.206673831405294, 0.793326168594706), (0.152766175228443, 0.847233824771557), .UNSPECIFIED.);
#2480 = ADVANCED_FACE ('', (#2420), #2470, .T.);
#2490 = CLOSED_SHELL ('', (#360, #640, #940, #1160, #1400, #1620, #1920, #2140, #2320, #2480));
#2500 = MANIFOLD_SOLID_BREP ('', #2490);
#2510 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#2520 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#2530 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#2540 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #2510, 'DISTANCE_ACCURACY_VALUE', '');
#2550 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#2540))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#2510, #2520, #2530))
   REPRESENTATION_CONTEXT ('', '3D')
);
#2560 = COLOUR_RGB ('', 1., 0.74901960784314, 0.);
#2570 = FILL_AREA_STYLE_COLOUR ('', #2560);
#2580 = FILL_AREA_STYLE ('', (#2570));
#2590 = SURFACE_STYLE_FILL_AREA (#2580);
#2600 = SURFACE_SIDE_STYLE ('', (#2590));
#2610 = SURFACE_STYLE_USAGE (.POSITIVE., #2600);
#2620 = PRESENTATION_STYLE_ASSIGNMENT ((#2610));
#2630 = STYLED_ITEM ('', (#2620), #2500);
#2640 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#2500), #2550);
#2650 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#2660 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #2650);
#2670 = MECHANICAL_CONTEXT ('', #2650, 'mechanical');
#2680 = PRODUCT ('product-name', '', '', (#2670));
#2690 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#2700 = PERSON ('', '', $, $, $, $);
#2710 = ORGANIZATION ($, '', '');
#2720 = PERSON_AND_ORGANIZATION (#2700, #2710);
#2730 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#2720, #2690, (#2680));
#2740 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#2680));
#2750 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #2680, .NOT_KNOWN.);
#2760 = APPROVAL_STATUS ('approved');
#2770 = APPROVAL (#2760, '');
#2780 = CALENDAR_DATE (2010, 26, 4);
#2790 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#2800 = LOCAL_TIME (7, 34, 49., #2790);
#2810 = DATE_AND_TIME (#2780, #2800);
#2820 = APPROVAL_DATE_TIME (#2810, #2770);
#2830 = APPROVAL_ROLE ('');
#2840 = PERSON ('', '', $, $, $, $);
#2850 = ORGANIZATION ($, '', '');
#2860 = PERSON_AND_ORGANIZATION (#2840, #2850);
#2870 = APPROVAL_PERSON_ORGANIZATION (#2860, #2770, #2830);
#2880 = CC_DESIGN_APPROVAL (#2770, (#2750));
#2890 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#2900 = PERSON ('', '', $, $, $, $);
#2910 = ORGANIZATION ($, '', '');
#2920 = PERSON_AND_ORGANIZATION (#2900, #2910);
#2930 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#2920, #2890, (#2750));
#2940 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#2950 = PERSON ('', '', $, $, $, $);
#2960 = ORGANIZATION ($, '', '');
#2970 = PERSON_AND_ORGANIZATION (#2950, #2960);
#2980 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#2970, #2940, (#2750));
#2990 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#3000 = SECURITY_CLASSIFICATION ('', '', #2990);
#3010 = APPROVAL_STATUS ('approved');
#3020 = APPROVAL (#3010, '');
#3030 = CALENDAR_DATE (2010, 26, 4);
#3040 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#3050 = LOCAL_TIME (7, 34, 49., #3040);
#3060 = DATE_AND_TIME (#3030, #3050);
#3070 = APPROVAL_DATE_TIME (#3060, #3020);
#3080 = APPROVAL_ROLE ('');
#3090 = PERSON ('', '', $, $, $, $);
#3100 = ORGANIZATION ($, '', '');
#3110 = PERSON_AND_ORGANIZATION (#3090, #3100);
#3120 = APPROVAL_PERSON_ORGANIZATION (#3110, #3020, #3080);
#3130 = CC_DESIGN_APPROVAL (#3020, (#3000));
#3140 = DATE_TIME_ROLE ('classification_date');
#3150 = CALENDAR_DATE (2010, 26, 4);
#3160 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#3170 = LOCAL_TIME (7, 34, 49., #3160);
#3180 = DATE_AND_TIME (#3150, #3170);
#3190 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#3180, #3140, (#3000));
#3200 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#3210 = PERSON ('', '', $, $, $, $);
#3220 = ORGANIZATION ($, '', '');
#3230 = PERSON_AND_ORGANIZATION (#3210, #3220);
#3240 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#3230, #3200, (#3000));
#3250 = CC_DESIGN_SECURITY_CLASSIFICATION (#3000, (#2750));
#3260 = DESIGN_CONTEXT ('', #2650, 'design');
#3270 = PRODUCT_DEFINITION ('', '', #2750, #3260);
#3280 = APPROVAL_STATUS ('approved');
#3290 = APPROVAL (#3280, '');
#3300 = CALENDAR_DATE (2010, 26, 4);
#3310 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#3320 = LOCAL_TIME (7, 34, 49., #3310);
#3330 = DATE_AND_TIME (#3300, #3320);
#3340 = APPROVAL_DATE_TIME (#3330, #3290);
#3350 = APPROVAL_ROLE ('');
#3360 = PERSON ('', '', $, $, $, $);
#3370 = ORGANIZATION ($, '', '');
#3380 = PERSON_AND_ORGANIZATION (#3360, #3370);
#3390 = APPROVAL_PERSON_ORGANIZATION (#3380, #3290, #3350);
#3400 = CC_DESIGN_APPROVAL (#3290, (#3270));
#3410 = DATE_TIME_ROLE ('creation_date');
#3420 = CALENDAR_DATE (2010, 26, 4);
#3430 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#3440 = LOCAL_TIME (7, 34, 49., #3430);
#3450 = DATE_AND_TIME (#3420, #3440);
#3460 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#3450, #3410, (#3270));
#3470 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#3480 = PERSON ('', '', $, $, $, $);
#3490 = ORGANIZATION ($, '', '');
#3500 = PERSON_AND_ORGANIZATION (#3480, #3490);
#3510 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#3500, #3470, (#3270));
#3520 = PRODUCT_DEFINITION_SHAPE ('', '', #3270);
#3530 = SHAPE_DEFINITION_REPRESENTATION (#3520, #2640);
#3540 = CARTESIAN_POINT ('', (0.348258521929435, 0.292227254948912, -2.38));
#3550 = VERTEX_POINT ('', #3540);
#3560 = CARTESIAN_POINT ('', (6.20274813411381, 0.292227254948913, -2.38));
#3570 = VERTEX_POINT ('', #3560);
#3580 = CARTESIAN_POINT ('', (0.348258521929435, 0.292227254948913, -2.38));
#3590 = CARTESIAN_POINT ('', (6.20274813411381, 0.292227254948913, -2.38));
#3600 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3580, #3590), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3610 = EDGE_CURVE ('', #3550, #3570, #3600, .T.);
#3620 = ORIENTED_EDGE ('', *, *, #3610, .F.);
#3630 = CARTESIAN_POINT ('', (1.36464755494512, 6.05777274505109, -2.38));
#3640 = VERTEX_POINT ('', #3630);
#3650 = CARTESIAN_POINT ('', (1.36464755494512, 6.05777274505109, -2.38));
#3660 = CARTESIAN_POINT ('', (0.348258521929435, 0.292227254948912, -2.38));
#3670 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3650, #3660), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3680 = EDGE_CURVE ('', #3640, #3550, #3670, .T.);
#3690 = ORIENTED_EDGE ('', *, *, #3680, .F.);
#3700 = CARTESIAN_POINT ('', (7.21913716712949, 6.05777274505109, -2.38));
#3710 = VERTEX_POINT ('', #3700);
#3720 = CARTESIAN_POINT ('', (7.21913716712949, 6.05777274505109, -2.38));
#3730 = CARTESIAN_POINT ('', (1.36464755494512, 6.05777274505109, -2.38));
#3740 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3720, #3730), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3750 = EDGE_CURVE ('', #3710, #3640, #3740, .T.);
#3760 = ORIENTED_EDGE ('', *, *, #3750, .F.);
#3770 = CARTESIAN_POINT ('', (6.20274813411381, 0.292227254948913, -2.38));
#3780 = CARTESIAN_POINT ('', (7.21913716712949, 6.05777274505109, -2.38));
#3790 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#3770, #3780), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#3800 = EDGE_CURVE ('', #3570, #3710, #3790, .T.);
#3810 = ORIENTED_EDGE ('', *, *, #3800, .F.);
#3820 = EDGE_LOOP ('', (#3620, #3690, #3760, #3810));
#3830 = FACE_OUTER_BOUND ('', #3820, .T.);
#3840 = CARTESIAN_POINT ('', (7.21913716712949, 0.292227254948912, -2.38));
#3850 = CARTESIAN_POINT ('', (7.21913716712949, 6.05777274505109, -2.38));
#3860 = CARTESIAN_POINT ('', (0.348258521929434, 0.292227254948912, -2.38));
#3870 = CARTESIAN_POINT ('', (0.348258521929434, 6.05777274505109, -2.38));
#3880 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#3840, #3850), (#3860, #3870)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.15180281529798, 0.84819718470202), (0.20781805186918, 0.79218194813082), .UNSPECIFIED.);
#3890 = ADVANCED_FACE ('', (#3830), #3880, .T.);
#3900 = ORIENTED_EDGE ('', *, *, #3680, .T.);
#3910 = CARTESIAN_POINT ('', (0.0413891679164005, 0.234729635533386, 0.));
#3920 = VERTEX_POINT ('', #3910);
#3930 = CARTESIAN_POINT ('', (0.0413891679164004, 0.234729635533386, 0.));
#3940 = CARTESIAN_POINT ('', (0.348258521929435, 0.292227254948912, -2.38));
#3950 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#3930, #3940), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#3960 = EDGE_CURVE ('', #3920, #3550, #3950, .T.);
#3970 = ORIENTED_EDGE ('', *, *, #3960, .F.);
#3980 = CARTESIAN_POINT ('', (1.09029507921746, 6.18472963553339, 0.));
#3990 = VERTEX_POINT ('', #3980);
#4000 = CARTESIAN_POINT ('', (1.09029507921746, 6.18472963553339, 0.));
#4010 = CARTESIAN_POINT ('', (0.0413891679164005, 0.234729635533386, 0.));
#4020 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4000, #4010), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4030 = EDGE_CURVE ('', #3990, #3920, #4020, .T.);
#4040 = ORIENTED_EDGE ('', *, *, #4030, .F.);
#4050 = CARTESIAN_POINT ('', (1.09029507921746, 6.18472963553339, 0.));
#4060 = CARTESIAN_POINT ('', (1.36464755494512, 6.05777274505109, -2.38));
#4070 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#4050, #4060), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#4080 = EDGE_CURVE ('', #3990, #3640, #4070, .T.);
#4090 = ORIENTED_EDGE ('', *, *, #4080, .T.);
#4100 = EDGE_LOOP ('', (#3900, #3970, #4040, #4090));
#4110 = FACE_OUTER_BOUND ('', #4100, .T.);
#4120 = CARTESIAN_POINT ('', (1.36464755494512, 6.05777274505109, -2.38));
#4130 = CARTESIAN_POINT ('', (1.09029507921746, 6.18472963553339, 0.));
#4140 = CARTESIAN_POINT ('', (0.348258521929435, 0.292227254948912, -2.38));
#4150 = CARTESIAN_POINT ('', (0.0413891679164005, 0.234729635533386, 0.));
#4160 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4120, #4130), (#4140, #4150)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#4170 = ADVANCED_FACE ('', (#4110), #4160, .T.);
#4180 = CARTESIAN_POINT ('', (0.238350718518842, -2.77555756156289E-17, 0.));
#4190 = VERTEX_POINT ('', #4180);
#4200 = CARTESIAN_POINT ('', (0.0413891679164004, 0.234729635533386, 0.));
#4210 = CARTESIAN_POINT ('', (0.0251944729022505, 0.142884956125384, 0.));
#4220 = CARTESIAN_POINT ('', (0.0851418298950464, 0.0714424780626921, 0.));
#4230 = CARTESIAN_POINT ('', (0.145089186887842, -1.51060599019475E-17, 0.));
#4240 = CARTESIAN_POINT ('', (0.238350718518842, -2.77555756156289E-17, 0.));
#4250 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4200, #4210, #4220, #4230, #4240), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 0.5, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.90630778703665, 1., 0.90630778703665, 1.))
   REPRESENTATION_ITEM ('')
);
#4260 = EDGE_CURVE ('', #3920, #4190, #4250, .T.);
#4270 = ORIENTED_EDGE ('', *, *, #4260, .F.);
#4280 = ORIENTED_EDGE ('', *, *, #3960, .T.);
#4290 = CARTESIAN_POINT ('', (0.238350718518842, -2.77555756156289E-17, 0.));
#4300 = CARTESIAN_POINT ('', (0.348258521929435, 0.292227254948912, -2.38));
#4310 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#4290, #4300), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#4320 = EDGE_CURVE ('', #4190, #3550, #4310, .T.);
#4330 = ORIENTED_EDGE ('', *, *, #4320, .F.);
#4340 = EDGE_LOOP ('', (#4270, #4280, #4330));
#4350 = FACE_OUTER_BOUND ('', #4340, .T.);
#4360 = CARTESIAN_POINT ('', (0.0413891679164004, 0.234729635533386, 0.));
#4370 = CARTESIAN_POINT ('', (0.0251944729022505, 0.142884956125384, 0.));
#4380 = CARTESIAN_POINT ('', (0.0851418298950464, 0.0714424780626921, 0.));
#4390 = CARTESIAN_POINT ('', (0.145089186887842, -1.51060599019475E-17, 0.));
#4400 = CARTESIAN_POINT ('', (0.238350718518842, -2.77555756156289E-17, 0.));
#4410 = CARTESIAN_POINT ('', (0.348258521929435, 0.292227254948912, -2.38));
#4420 = CARTESIAN_POINT ('', (0.348258521929435, 0.292227254948912, -2.38));
#4430 = CARTESIAN_POINT ('', (0.348258521929435, 0.292227254948912, -2.38));
#4440 = CARTESIAN_POINT ('', (0.348258521929435, 0.292227254948912, -2.38));
#4450 = CARTESIAN_POINT ('', (0.348258521929435, 0.292227254948912, -2.38));
#4460 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#4360, #4370, #4380, #4390, #4400), (#4410, #4420, #4430, #4440, #4450)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 2, 3), (0., 1.), (0., 0.5, 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.90630778703665, 1., 0.90630778703665, 1.), (1., 0.90630778703665, 1., 0.90630778703665, 1.)))
   REPRESENTATION_ITEM ('')
);
#4470 = ADVANCED_FACE ('', (#4350), #4460, .T.);
#4480 = ORIENTED_EDGE ('', *, *, #3610, .T.);
#4490 = CARTESIAN_POINT ('', (6.28013905923902, 0., 0.));
#4500 = VERTEX_POINT ('', #4490);
#4510 = CARTESIAN_POINT ('', (6.28013905923902, 0., 0.));
#4520 = CARTESIAN_POINT ('', (6.20274813411381, 0.292227254948913, -2.38));
#4530 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#4510, #4520), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#4540 = EDGE_CURVE ('', #4500, #3570, #4530, .T.);
#4550 = ORIENTED_EDGE ('', *, *, #4540, .F.);
#4560 = CARTESIAN_POINT ('', (0.238350718518842, 0., 0.));
#4570 = CARTESIAN_POINT ('', (6.28013905923902, 0., 0.));
#4580 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#4560, #4570), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#4590 = EDGE_CURVE ('', #4190, #4500, #4580, .T.);
#4600 = ORIENTED_EDGE ('', *, *, #4590, .F.);
#4610 = ORIENTED_EDGE ('', *, *, #4320, .T.);
#4620 = EDGE_LOOP ('', (#4480, #4550, #4600, #4610));
#4630 = FACE_OUTER_BOUND ('', #4620, .T.);
#4640 = CARTESIAN_POINT ('', (0.348258521929435, 0.292227254948913, -2.38));
#4650 = CARTESIAN_POINT ('', (0.238350718518842, 0., 0.));
#4660 = CARTESIAN_POINT ('', (6.20274813411381, 0.292227254948913, -2.38));
#4670 = CARTESIAN_POINT ('', (6.28013905923902, 0., 0.));
#4680 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#4640, #4650), (#4660, #4670)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#4690 = ADVANCED_FACE ('', (#4630), #4680, .T.);
#4700 = CARTESIAN_POINT ('', (6.47710060984147, 0.165270364466614, 0.));
#4710 = VERTEX_POINT ('', #4700);
#4720 = CARTESIAN_POINT ('', (6.28013905923902, 0., 0.));
#4730 = CARTESIAN_POINT ('', (6.44795898547448, -2.41537945826843E-17, 0.));
#4740 = CARTESIAN_POINT ('', (6.47710060984147, 0.165270364466614, 0.));
#4750 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#4720, #4730, #4740), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.766044443118978, 1.))
   REPRESENTATION_ITEM ('')
);
#4760 = EDGE_CURVE ('', #4500, #4710, #4750, .T.);
#4770 = ORIENTED_EDGE ('', *, *, #4760, .F.);
#4780 = ORIENTED_EDGE ('', *, *, #4540, .T.);
#4790 = CARTESIAN_POINT ('', (6.47710060984147, 0.165270364466614, 0.));
#4800 = CARTESIAN_POINT ('', (6.20274813411381, 0.292227254948913, -2.38));
#4810 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#4790, #4800), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#4820 = EDGE_CURVE ('', #4710, #3570, #4810, .T.);
#4830 = ORIENTED_EDGE ('', *, *, #4820, .F.);
#4840 = EDGE_LOOP ('', (#4770, #4780, #4830));
#4850 = FACE_OUTER_BOUND ('', #4840, .T.);
#4860 = CARTESIAN_POINT ('', (6.28013905923902, 0., 0.));
#4870 = CARTESIAN_POINT ('', (6.44795898547448, -2.41537945826843E-17, 0.));
#4880 = CARTESIAN_POINT ('', (6.47710060984147, 0.165270364466614, 0.));
#4890 = CARTESIAN_POINT ('', (6.20274813411381, 0.292227254948913, -2.38));
#4900 = CARTESIAN_POINT ('', (6.20274813411381, 0.292227254948913, -2.38));
#4910 = CARTESIAN_POINT ('', (6.20274813411381, 0.292227254948913, -2.38));
#4920 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#4860, #4870, #4880), (#4890, #4900, #4910)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 3), (0., 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.766044443118978, 1.), (1., 0.766044443118978, 1.)))
   REPRESENTATION_ITEM ('')
);
#4930 = ADVANCED_FACE ('', (#4850), #4920, .T.);
#4940 = ORIENTED_EDGE ('', *, *, #3800, .T.);
#4950 = CARTESIAN_POINT ('', (7.52600652114252, 6.11527036446661, 0.));
#4960 = VERTEX_POINT ('', #4950);
#4970 = CARTESIAN_POINT ('', (7.52600652114252, 6.11527036446661, 0.));
#4980 = CARTESIAN_POINT ('', (7.21913716712949, 6.05777274505109, -2.38));
#4990 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#4970, #4980), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#5000 = EDGE_CURVE ('', #4960, #3710, #4990, .T.);
#5010 = ORIENTED_EDGE ('', *, *, #5000, .F.);
#5020 = CARTESIAN_POINT ('', (6.47710060984147, 0.165270364466614, 0.));
#5030 = CARTESIAN_POINT ('', (7.52600652114252, 6.11527036446661, 0.));
#5040 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5020, #5030), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5050 = EDGE_CURVE ('', #4710, #4960, #5040, .T.);
#5060 = ORIENTED_EDGE ('', *, *, #5050, .F.);
#5070 = ORIENTED_EDGE ('', *, *, #4820, .T.);
#5080 = EDGE_LOOP ('', (#4940, #5010, #5060, #5070));
#5090 = FACE_OUTER_BOUND ('', #5080, .T.);
#5100 = CARTESIAN_POINT ('', (6.20274813411381, 0.292227254948913, -2.38));
#5110 = CARTESIAN_POINT ('', (6.47710060984147, 0.165270364466614, 0.));
#5120 = CARTESIAN_POINT ('', (7.21913716712949, 6.05777274505109, -2.38));
#5130 = CARTESIAN_POINT ('', (7.52600652114252, 6.11527036446661, 0.));
#5140 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5100, #5110), (#5120, #5130)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#5150 = ADVANCED_FACE ('', (#5090), #5140, .T.);
#5160 = CARTESIAN_POINT ('', (7.32904497054008, 6.35, 0.));
#5170 = VERTEX_POINT ('', #5160);
#5180 = CARTESIAN_POINT ('', (7.52600652114252, 6.11527036446661, 0.));
#5190 = CARTESIAN_POINT ('', (7.54220121615667, 6.20711504387462, 0.));
#5200 = CARTESIAN_POINT ('', (7.48225385916388, 6.27855752193731, 0.));
#5210 = CARTESIAN_POINT ('', (7.42230650217108, 6.35, 0.));
#5220 = CARTESIAN_POINT ('', (7.32904497054008, 6.35, 0.));
#5230 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5180, #5190, #5200, #5210, #5220), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 2, 3), (0., 0.5, 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.90630778703665, 1., 0.90630778703665, 1.))
   REPRESENTATION_ITEM ('')
);
#5240 = EDGE_CURVE ('', #4960, #5170, #5230, .T.);
#5250 = ORIENTED_EDGE ('', *, *, #5240, .F.);
#5260 = ORIENTED_EDGE ('', *, *, #5000, .T.);
#5270 = CARTESIAN_POINT ('', (7.32904497054008, 6.35, 0.));
#5280 = CARTESIAN_POINT ('', (7.21913716712949, 6.05777274505109, -2.38));
#5290 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (1, (#5270, #5280), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((2, 2), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 1.))
   REPRESENTATION_ITEM ('')
);
#5300 = EDGE_CURVE ('', #5170, #3710, #5290, .T.);
#5310 = ORIENTED_EDGE ('', *, *, #5300, .F.);
#5320 = EDGE_LOOP ('', (#5250, #5260, #5310));
#5330 = FACE_OUTER_BOUND ('', #5320, .T.);
#5340 = CARTESIAN_POINT ('', (7.52600652114252, 6.11527036446661, 0.));
#5350 = CARTESIAN_POINT ('', (7.54220121615667, 6.20711504387462, 0.));
#5360 = CARTESIAN_POINT ('', (7.48225385916388, 6.27855752193731, 0.));
#5370 = CARTESIAN_POINT ('', (7.42230650217108, 6.35, 0.));
#5380 = CARTESIAN_POINT ('', (7.32904497054008, 6.35, 0.));
#5390 = CARTESIAN_POINT ('', (7.21913716712949, 6.05777274505109, -2.38));
#5400 = CARTESIAN_POINT ('', (7.21913716712949, 6.05777274505109, -2.38));
#5410 = CARTESIAN_POINT ('', (7.21913716712949, 6.05777274505109, -2.38));
#5420 = CARTESIAN_POINT ('', (7.21913716712949, 6.05777274505109, -2.38));
#5430 = CARTESIAN_POINT ('', (7.21913716712949, 6.05777274505109, -2.38));
#5440 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#5340, #5350, #5360, #5370, #5380), (#5390, #5400, #5410, #5420, #5430)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 2, 3), (0., 1.), (0., 0.5, 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.90630778703665, 1., 0.90630778703665, 1.), (1., 0.90630778703665, 1., 0.90630778703665, 1.)))
   REPRESENTATION_ITEM ('')
);
#5450 = ADVANCED_FACE ('', (#5330), #5440, .T.);
#5460 = ORIENTED_EDGE ('', *, *, #3750, .T.);
#5470 = CARTESIAN_POINT ('', (1.2872566298199, 6.35, 0.));
#5480 = VERTEX_POINT ('', #5470);
#5490 = CARTESIAN_POINT ('', (1.36464755494512, 6.05777274505109, -2.38));
#5500 = CARTESIAN_POINT ('', (1.2872566298199, 6.35, 0.));
#5510 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5490, #5500), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5520 = EDGE_CURVE ('', #3640, #5480, #5510, .T.);
#5530 = ORIENTED_EDGE ('', *, *, #5520, .T.);
#5540 = CARTESIAN_POINT ('', (7.32904497054008, 6.35, 0.));
#5550 = CARTESIAN_POINT ('', (1.2872566298199, 6.35, 0.));
#5560 = B_SPLINE_CURVE_WITH_KNOTS ('', 1, (#5540, #5550), .UNSPECIFIED., .F., .U., (2, 2), (0., 1.), .UNSPECIFIED.);
#5570 = EDGE_CURVE ('', #5170, #5480, #5560, .T.);
#5580 = ORIENTED_EDGE ('', *, *, #5570, .F.);
#5590 = ORIENTED_EDGE ('', *, *, #5300, .T.);
#5600 = EDGE_LOOP ('', (#5460, #5530, #5580, #5590));
#5610 = FACE_OUTER_BOUND ('', #5600, .T.);
#5620 = CARTESIAN_POINT ('', (7.21913716712949, 6.05777274505109, -2.38));
#5630 = CARTESIAN_POINT ('', (7.32904497054008, 6.35, 0.));
#5640 = CARTESIAN_POINT ('', (1.36464755494512, 6.05777274505109, -2.38));
#5650 = CARTESIAN_POINT ('', (1.2872566298199, 6.35, 0.));
#5660 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5620, #5630), (#5640, #5650)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0., 1.), (0., 1.), .UNSPECIFIED.);
#5670 = ADVANCED_FACE ('', (#5610), #5660, .T.);
#5680 = CARTESIAN_POINT ('', (1.2872566298199, 6.35, 0.));
#5690 = CARTESIAN_POINT ('', (1.11943670358444, 6.35, 0.));
#5700 = CARTESIAN_POINT ('', (1.09029507921746, 6.18472963553339, 0.));
#5710 = (
   BOUNDED_CURVE ()
   B_SPLINE_CURVE (2, (#5680, #5690, #5700), .UNSPECIFIED., .F., .U.)
   B_SPLINE_CURVE_WITH_KNOTS ((3, 3), (0., 1.), .UNSPECIFIED.)
   CURVE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_CURVE ((1., 0.766044443118977, 1.))
   REPRESENTATION_ITEM ('')
);
#5720 = EDGE_CURVE ('', #5480, #3990, #5710, .T.);
#5730 = ORIENTED_EDGE ('', *, *, #5720, .F.);
#5740 = ORIENTED_EDGE ('', *, *, #5520, .F.);
#5750 = ORIENTED_EDGE ('', *, *, #4080, .F.);
#5760 = EDGE_LOOP ('', (#5730, #5740, #5750));
#5770 = FACE_OUTER_BOUND ('', #5760, .T.);
#5780 = CARTESIAN_POINT ('', (1.2872566298199, 6.35, 0.));
#5790 = CARTESIAN_POINT ('', (1.11943670358444, 6.35, 0.));
#5800 = CARTESIAN_POINT ('', (1.09029507921746, 6.18472963553339, 0.));
#5810 = CARTESIAN_POINT ('', (1.36464755494512, 6.05777274505109, -2.38));
#5820 = CARTESIAN_POINT ('', (1.36464755494512, 6.05777274505109, -2.38));
#5830 = CARTESIAN_POINT ('', (1.36464755494512, 6.05777274505109, -2.38));
#5840 = (
   BOUNDED_SURFACE ()
   B_SPLINE_SURFACE (1, 2, ((#5780, #5790, #5800), (#5810, #5820, #5830)), .UNSPECIFIED., .F., .F., .U.)
   B_SPLINE_SURFACE_WITH_KNOTS ((2, 2), (3, 3), (0., 1.), (0., 1.), .UNSPECIFIED.)
   SURFACE ()
   GEOMETRIC_REPRESENTATION_ITEM ()
   RATIONAL_B_SPLINE_SURFACE (((1., 0.766044443118977, 1.), (1., 0.766044443118977, 1.)))
   REPRESENTATION_ITEM ('')
);
#5850 = ADVANCED_FACE ('', (#5770), #5840, .T.);
#5860 = ORIENTED_EDGE ('', *, *, #4590, .T.);
#5870 = ORIENTED_EDGE ('', *, *, #4760, .T.);
#5880 = ORIENTED_EDGE ('', *, *, #5050, .T.);
#5890 = ORIENTED_EDGE ('', *, *, #5240, .T.);
#5900 = ORIENTED_EDGE ('', *, *, #5570, .T.);
#5910 = ORIENTED_EDGE ('', *, *, #5720, .T.);
#5920 = ORIENTED_EDGE ('', *, *, #4030, .T.);
#5930 = ORIENTED_EDGE ('', *, *, #4260, .T.);
#5940 = EDGE_LOOP ('', (#5860, #5870, #5880, #5890, #5900, #5910, #5920, #5930));
#5950 = FACE_OUTER_BOUND ('', #5940, .T.);
#5960 = CARTESIAN_POINT ('', (7.54220121615667, 0., 0.));
#5970 = CARTESIAN_POINT ('', (0.0251944729022497, 0., 0.));
#5980 = CARTESIAN_POINT ('', (7.54220121615667, 6.35, 0.));
#5990 = CARTESIAN_POINT ('', (0.0251944729022497, 6.35, 0.));
#6000 = B_SPLINE_SURFACE_WITH_KNOTS ('', 1, 1, ((#5960, #5970), (#5980, #5990)), .UNSPECIFIED., .F., .F., .U., (2, 2), (2, 2), (0.206673831405294, 0.793326168594706), (0.152766175228443, 0.847233824771557), .UNSPECIFIED.);
#6010 = ADVANCED_FACE ('', (#5950), #6000, .T.);
#6020 = CLOSED_SHELL ('', (#3890, #4170, #4470, #4690, #4930, #5150, #5450, #5670, #5850, #6010));
#6030 = MANIFOLD_SOLID_BREP ('', #6020);
#6040 = (
   LENGTH_UNIT ()
   NAMED_UNIT (*)
   SI_UNIT (.MILLI., .METRE.)
);
#6050 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .STERADIAN.)
   SOLID_ANGLE_UNIT ()
);
#6060 = (
   NAMED_UNIT (*)
   SI_UNIT ($, .RADIAN.)
   PLANE_ANGLE_UNIT ()
);
#6070 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE(1.E-6), #6040, 'DISTANCE_ACCURACY_VALUE', '');
#6080 = (
   GEOMETRIC_REPRESENTATION_CONTEXT (3)
   GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ((#6070))
   GLOBAL_UNIT_ASSIGNED_CONTEXT ((#6040, #6050, #6060))
   REPRESENTATION_CONTEXT ('', '3D')
);
#6090 = COLOUR_RGB ('', 1., 0.74901960784314, 0.);
#6100 = FILL_AREA_STYLE_COLOUR ('', #6090);
#6110 = FILL_AREA_STYLE ('', (#6100));
#6120 = SURFACE_STYLE_FILL_AREA (#6110);
#6130 = SURFACE_SIDE_STYLE ('', (#6120));
#6140 = SURFACE_STYLE_USAGE (.POSITIVE., #6130);
#6150 = PRESENTATION_STYLE_ASSIGNMENT ((#6140));
#6160 = STYLED_ITEM ('', (#6150), #6030);
#6170 = ADVANCED_BREP_SHAPE_REPRESENTATION ('', (#6030), #6080);
#6180 = APPLICATION_CONTEXT ('configuration controlled 3D designs of mechanical parts and assemblies');
#6190 = APPLICATION_PROTOCOL_DEFINITION ('International Standard', 'config_control_design', 1997, #6180);
#6200 = MECHANICAL_CONTEXT ('', #6180, 'mechanical');
#6210 = PRODUCT ('product-name', '', '', (#6200));
#6220 = PERSON_AND_ORGANIZATION_ROLE ('design_owner');
#6230 = PERSON ('', '', $, $, $, $);
#6240 = ORGANIZATION ($, '', '');
#6250 = PERSON_AND_ORGANIZATION (#6230, #6240);
#6260 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#6250, #6220, (#6210));
#6270 = PRODUCT_RELATED_PRODUCT_CATEGORY ('detail', $, (#6210));
#6280 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ('', '', #6210, .NOT_KNOWN.);
#6290 = APPROVAL_STATUS ('approved');
#6300 = APPROVAL (#6290, '');
#6310 = CALENDAR_DATE (2010, 26, 4);
#6320 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#6330 = LOCAL_TIME (7, 34, 49., #6320);
#6340 = DATE_AND_TIME (#6310, #6330);
#6350 = APPROVAL_DATE_TIME (#6340, #6300);
#6360 = APPROVAL_ROLE ('');
#6370 = PERSON ('', '', $, $, $, $);
#6380 = ORGANIZATION ($, '', '');
#6390 = PERSON_AND_ORGANIZATION (#6370, #6380);
#6400 = APPROVAL_PERSON_ORGANIZATION (#6390, #6300, #6360);
#6410 = CC_DESIGN_APPROVAL (#6300, (#6280));
#6420 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#6430 = PERSON ('', '', $, $, $, $);
#6440 = ORGANIZATION ($, '', '');
#6450 = PERSON_AND_ORGANIZATION (#6430, #6440);
#6460 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#6450, #6420, (#6280));
#6470 = PERSON_AND_ORGANIZATION_ROLE ('part_supplier');
#6480 = PERSON ('', '', $, $, $, $);
#6490 = ORGANIZATION ($, '', '');
#6500 = PERSON_AND_ORGANIZATION (#6480, #6490);
#6510 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#6500, #6470, (#6280));
#6520 = SECURITY_CLASSIFICATION_LEVEL ('unclassified');
#6530 = SECURITY_CLASSIFICATION ('', '', #6520);
#6540 = APPROVAL_STATUS ('approved');
#6550 = APPROVAL (#6540, '');
#6560 = CALENDAR_DATE (2010, 26, 4);
#6570 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#6580 = LOCAL_TIME (7, 34, 49., #6570);
#6590 = DATE_AND_TIME (#6560, #6580);
#6600 = APPROVAL_DATE_TIME (#6590, #6550);
#6610 = APPROVAL_ROLE ('');
#6620 = PERSON ('', '', $, $, $, $);
#6630 = ORGANIZATION ($, '', '');
#6640 = PERSON_AND_ORGANIZATION (#6620, #6630);
#6650 = APPROVAL_PERSON_ORGANIZATION (#6640, #6550, #6610);
#6660 = CC_DESIGN_APPROVAL (#6550, (#6530));
#6670 = DATE_TIME_ROLE ('classification_date');
#6680 = CALENDAR_DATE (2010, 26, 4);
#6690 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#6700 = LOCAL_TIME (7, 34, 49., #6690);
#6710 = DATE_AND_TIME (#6680, #6700);
#6720 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#6710, #6670, (#6530));
#6730 = PERSON_AND_ORGANIZATION_ROLE ('classification_officer');
#6740 = PERSON ('', '', $, $, $, $);
#6750 = ORGANIZATION ($, '', '');
#6760 = PERSON_AND_ORGANIZATION (#6740, #6750);
#6770 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#6760, #6730, (#6530));
#6780 = CC_DESIGN_SECURITY_CLASSIFICATION (#6530, (#6280));
#6790 = DESIGN_CONTEXT ('', #6180, 'design');
#6800 = PRODUCT_DEFINITION ('', '', #6280, #6790);
#6810 = APPROVAL_STATUS ('approved');
#6820 = APPROVAL (#6810, '');
#6830 = CALENDAR_DATE (2010, 26, 4);
#6840 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#6850 = LOCAL_TIME (7, 34, 49., #6840);
#6860 = DATE_AND_TIME (#6830, #6850);
#6870 = APPROVAL_DATE_TIME (#6860, #6820);
#6880 = APPROVAL_ROLE ('');
#6890 = PERSON ('', '', $, $, $, $);
#6900 = ORGANIZATION ($, '', '');
#6910 = PERSON_AND_ORGANIZATION (#6890, #6900);
#6920 = APPROVAL_PERSON_ORGANIZATION (#6910, #6820, #6880);
#6930 = CC_DESIGN_APPROVAL (#6820, (#6800));
#6940 = DATE_TIME_ROLE ('creation_date');
#6950 = CALENDAR_DATE (2010, 26, 4);
#6960 = COORDINATED_UNIVERSAL_TIME_OFFSET (0, $, .AHEAD.);
#6970 = LOCAL_TIME (7, 34, 49., #6960);
#6980 = DATE_AND_TIME (#6950, #6970);
#6990 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT (#6980, #6940, (#6800));
#7000 = PERSON_AND_ORGANIZATION_ROLE ('creator');
#7010 = PERSON ('', '', $, $, $, $);
#7020 = ORGANIZATION ($, '', '');
#7030 = PERSON_AND_ORGANIZATION (#7010, #7020);
#7040 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT (#7030, #7000, (#6800));
#7050 = PRODUCT_DEFINITION_SHAPE ('', '', #6800);
#7060 = SHAPE_DEFINITION_REPRESENTATION (#7050, #6170);
ENDSEC;
END-ISO-10303-21;